Switches and Indicators 14 14 Switches and Indicators Index Series 14 Description Page 331 Product Assembly Page 332 Product Range - pushbuttons for standard mounting - pushbuttons for flush mounting - accessories / spare parts 330 01.2000 Page 333 Page 340 Page 345 Technical Data Page 353 Technical Drawing / Dimension / Layout Page 355 Circuit Drawing Page 364 Typical Applications Page 365 Marking Page 366 14 Description General Notes Keylock switches The illuminated pushbuttons with 1 metre Immesion prooffront (IP 67) combine the robust actuators of series 04 with gold plated silver snap-action, low-level switching elements silver contacts for switching elements 2.8 mm plug-in terminals can be supplied on request for 1 changeover only. The range includes pushbuttons, keylock switches and selector switches. Safety lock (Index K). Single locks (2 positions). 10 different locks with standard numbers 1001-1010. If the lock number is not specified, we will supply No. 1001. An additional 690 locks with numbers 1011-1700 are available on request. For numbers 1001-1700 no master key can be supplied. Two keys are supplied with each keylock switch. Spare keys for KABA safety locks may be ordered by quoting No. 14-987 (please state the lock number). Mounting Mounting from the front through the mounting hole either 22.5 mm diameter for raised or 30.5 mm diameter for flush. The pushbuttons are screwed to the panel by means of a front ring and prevented from twisting by two screws. To ensure correct positioning of the pushbuttons we can provide a positioning insert on request. The universal terminals of the low-level switching elements permit them to be mounted on printed circuit boards (PCB). These terminals are also suitable for dip soldering. For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in. Combined locking systems Information supplied on request. Number structure 14-XXX.0XX Kind of terminals Contact material Switch variant Lenses Example: The flat lenses, made of polyamide, are available in various colours, as well as translucent or transparent. -Illuminated pushbutton; momentary action, gold-plated silver contact; soldering terminals;1 switching element 14-131.025 -Lens red, transparent 704.602.2 Marking -Front ring; aluminium, natural anodized 704.600.1 For engravings, hot stamping and film inserts, see "Marking" on page 366. -Marking plate; white, translucent 704.609.9 Illumination Perfect illumination of the different coloured lenses is assured by lamps T 5,5 (6-60 V). For supply voltages above 60 V, it is necessary to use a voltage reduction element (external series resistor, capacitor or transformer). Do not solder the terminals directly, because of the high surface temperature. Multi-LEDs T 5,5 (6, 12, 24, 48 V) are available in the colours white, red, yellow and green. Specimen order Indicator front illumination - indicator front illumination, soldering terminal 14-040.005 Recommended accessories: - lens plastic, opaque black 704.6020 - marking foil for lens plastic/metal black704.609.0 - frontring, aluminium black 704.6020 - LED. 1 chip, 12 VDC, white 10-2109.3139 Position Indicating When a switch with maintained action is actuated, the lens remains in the depressed position mechanically. The state of the switch is apparent at all times from the position of the lens. All dimensions in mm. We reserve the right to modify technical data. 331 01.2000 14 14 Product Assembly illuminated-/pushbutton 1 2 3 4 5 front ring lens marking plate switch housing fixing nut pushbutton-/illuminated pushbutton for flush mounting 1 2 3 4 5 6 7 332 01.2000 front bezel bracket for flush mounting lens marking plate switch housing front panel pressure ring fixing nut 14 Pushbuttons for Standard Mounting indicator front illumination recommended accessories: components layout 14-040.005 14-041.006 mounting dimension ST/ PT ST UT technical drawing indicator front illumination 29 mm dia. part no. 14-040.002 circuit drawing connection method d lens plastic 345 d marking foil for lens plastic/metal 346 d front ring 347 d incandescent lamp 350; LED 350 e 2 1 1 - 0,050 2 1 1 1 1 1 1 0,050 0,050 connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 indicator full face illumination recommended accessories: components layout 14-030.005 14-031.006 14-741.006 14-742.006 mounting dimension 1 2 ST/ PT ST UT UT UT technical drawing - 29 mm dia. part no. 14-030.002 circuit drawing indicator full face illumination connection method diodes d lens cap for indicator full face illumination 346 d marking cap for lens cap for indicator full face illumination 347 d incandescent lamp 350; LED 350 e 2 1 1 - 0,010 2 1 3 4 1 1 2 2 1 1 1 1 1 1 1 0,010 0,011 0,011 0,011 connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 333 01.2000 14 14 Pushbuttons for Standard Mounting illuminated-/pushbutton front illumination recommended accessories: - 2NC - 2NO - 1NC + 1NO - mom 1 2 2NC + 2NO 1 2 3NC + 3NO - 4NC + 4NO - main mom main mom main mom main mom main mom main mom main mom components layout 1NO UT UT UT UT UT UT UT UT UT UT ST/ PT ST ST/ PT ST UT UT UT UT ST ST UT UT UT UT ST ST ST ST mounting dimension - connection method 1NC + 1NO main mom main mom main mom main mom main mom main contacts - technical drawing SA 1NC 29 mm dia. part no. 14-476.036 14-436.036 14-473.036 14-433.036 14-475.036 14-435.036 14-472.036 14-432.036 14-471.036 14-431.036 14-271.022 circuit drawing LL switching action illuminated-/pushbutton front illumination diode (1N 4007) switching system d lens plastic 345; lens metal 345 d marking foil for lens plastic/metal 346 d lens raised, plastic 345 d marking cap for lens raised plastic/metal 346 d front ring 347 d incandescent lamp 350; LED 350 e 13 26 16 29 15 28 14 27 17 30 12 5 5 5 5 5 5 5 5 5 5 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,013 14-271.025 14-131.022 12 25 3 3 1 1 - 0,013 0,013 14-131.025 14-747.029 14-743.029 14-748.029 14-744.029 14-272.025 14-132.025 14-749.029 14-745.029 14-750.029 14-746.029 14-273.025 14-133.025 14-274.025 14-134.025 25 10 23 11 24 9 22 7 20 8 21 6 19 5 18 3 4 4 4 4 3 3 4 4 4 4 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 0,013 0,014 0,014 0,014 0,014 0,015 0,015 0,016 0,016 0,016 0,016 0,017 0,017 0,019 0,019 switching system: LL = Low Level switching element, SA = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 contacts: NC = normally closed, NO = normally open marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 334 01.2000 14 Pushbuttons for Standard Mounting pushbutton with mushroom-head cap recommended accessories: 1NO 2NC 2NO SA 1NC + 1NO 2NC + 2NO 3NC + 3NO 4NC + 4NO main mom main mom main mom connection method switching action mom UT UT UT UT UT UT UT UT UT UT ST/ PT ST ST/ PT ST ST ST ST ST ST ST components layout 1NC + 1NO main mom main mom main mom main mom main mom main mounting dimension 1NC technical drawing LL 40 mm dia. part no. 14-476.036 14-436.036 14-473.036 14-433.036 14-475.036 14-435.036 14-472.036 14-432.036 14-471.036 14-431.036 14-271.022 circuit drawing pushbutton with mushroom-head cap contacts switching system d mushroom-head cap 346 d marking plate for mushroom-head cap 346 d front ring 347 e 13 26 16 29 15 28 14 27 17 30 12 7 7 7 7 7 7 7 7 7 7 6 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 - 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,013 14-271.025 14-131.022 12 25 6 6 2 2 - 0,013 0,013 14-131.025 14-272.025 14-132.025 14-273.025 14-133.025 14-274.025 14-134.025 25 9 22 6 19 5 18 6 6 6 6 6 6 6 2 2 2 2 2 2 2 - 0,013 0,015 0,015 0,017 0,017 0,019 0,019 switching system: LL = Low Level switching element, SA = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 contacts: NC = normally closed, NO = normally open marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 335 01.2000 14 14 Pushbuttons for Standard Mounting illuminated pushbutton with mushroom-head cap recommended accessories: - 2NC - 2NO - 1NC + 1NO - mom 1 2 2NC + 2NO 1 2 3NC + 3NO - 4NC + 4NO - main mom main mom main mom main mom main mom main mom main mom components layout 1NO UT UT UT UT UT UT UT UT UT UT ST/ PT ST ST/ PT ST UT UT UT UT ST ST UT UT UT UT ST ST ST ST mounting dimension - connection method 1NC + 1NO main mom main mom main mom main mom main mom main contacts - technical drawing SA 1NC 40 mm dia. part no. 14-476.036 14-436.036 14-473.036 14-433.036 14-475.036 14-435.036 14-472.036 14-432.036 14-471.036 14-431.036 14-271.022 circuit drawing LL switching action illuminated pushbutton with mushroom-head cap diode (1N 4007) switching system d mushroom-head cap illuminated 346 d marking plate for mushroom-head cap 346 d front ring 347 d incandescent lamp 350; LED 350 e 18 19 9 12 22 25 12 25 5 6 27 7 7 7 7 7 7 7 7 7 7 6 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 - 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,013 14-271.025 14-131.022 26 30 6 6 2 2 - 0,013 0,013 14-131.025 14-747.029 14-743.029 14-748.029 14-744.029 14-272.025 14-132.025 14-749.029 14-745.029 14-750.029 14-746.029 14-273.025 14-133.025 14-274.025 14-134.025 28 10 23 11 24 15 27 7 20 8 21 13 17 16 14 6 8 8 8 8 6 6 8 8 8 8 6 6 6 6 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 - 0,013 0,014 0,014 0,014 0,014 0,015 0,015 0,016 0,016 0,016 0,016 0,017 0,017 0,019 0,019 switching system: LL = Low Level switching element, SA = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 contacts: NC = normally closed, NO = normally open marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 336 01.2000 14 Pushbuttons for Standard Mounting keylock switch 2 positions main UT 2NO main UT 1NC + 1NO main ST/ PT SA ST pos. A: basic position pos. C: momentary position standard lock1001, other lock numbers on request LL SA 2NC + 2NO main ST 3NC + 3NO main ST 4NC + 4NO main ST 1NC + 1NO 2NO 1NC + 1NO mom mom mom 2NC + 2NO 3NC + 3NO 4NC + 4NO mom mom mom UT UT ST/ PT ST ST ST ST components layout 1NC + 1NO mounting dimension LL 29 mm dia. part no. 14-415.036K 14-412.036K 14-418.036K 14-414.036K 14-411.036K 14-417.036K 14-235.022K 14-135.022K 14-335.022K 14-235.025K 14-135.025K 14-335.025K 14-236.025K 14-136.025K 14-336.025K 14-237.025K 14-137.025K 14-337.025K 14-238.025K 14-138.025K 14-338.025K 14-438.036K 14-437.036K 14-141.022K technical drawing keylock switch 2 positions pos. A: basic position pos. C: maintaining position standard lock 1001, other lock numbers on request key removable in A A+C C A A+C C A A+C C A A+C C A A+C C A A+C C A A+C C A A A circuit drawing A connection method C A switching action C contacts mom. 42 maint. 90 switching system recommended accessories: - e 41 41 41 42 42 42 37 37 37 37 43 37 38 38 38 39 39 39 40 40 40 35 36 31 10 10 10 10 10 10 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 10 10 9 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 - 0,030 0,030 0,030 0,030 0,030 0,030 0,029 0,029 0,029 0,029 0,029 0,029 0,031 0,031 0,031 0,033 0,033 0,033 0,035 0,035 0,035 0,030 0,030 0,029 A A A A 14-141.025K 14-142.025K 14-143.025K 14-144.025K 31 32 33 34 9 9 9 9 1 1 1 1 - 0,029 0,031 0,033 0,035 switching system: LL = Low Level switching element, SA = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 contacts: NC = normally closed, NO = normally open Keylock switches are supplied with 2 keys. description see page 331 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 337 01.2000 14 14 Pushbuttons for Standard Mounting selector switch 2 positions 2NC 2NO SA 1NC + 1NO main mom main mom main mom main mom 2NC + 2NO 3NC + 3NO 4NC + 4NO short, black LL 1NC + 1NO 2NC 2NO SA 1NC + 1NO main mom main mom main mom main mom main mom main mom main mom 2NC + 2NO 3NC + 3NO 4NC + 4NO main mom main mom main mom UT UT UT UT UT UT ST/ PT ST PT ST ST ST ST ST ST ST UT UT UT UT UT UT ST/ PT ST ST/ PT ST ST ST ST ST ST ST components layout 1NC + 1NO mounting dimension LL 29 mm dia. part no. 14-572.0360 14-567.0360 14-571.0360 14-566.0360 14-570.0360 14-565.0360 14-556.0220 technical drawing selector switch 2 positions pos. A: basic position lever long, black circuit drawing A connection method C A switching action C contacts mom. 42 maint. 90 switching system recommended accessories: - e 56 49 55 48 57 50 51 12 12 12 12 12 12 11 3 3 3 3 3 3 3 1 1 1 1 1 1 - 0,025 0,025 0,025 0,025 0,025 0,025 0,024 14-556.0250 14-551.0220 14-551.0250 14-557.0250 14-552.0250 14-558.0250 14-553.0250 14-559.0250 14-554.0250 14-522.0360 14-517.0360 14-521.0360 14-516.0360 14-520.0360 14-515.0360 14-506.0220 51 44 44 52 45 53 46 54 47 56 49 55 48 57 50 51 11 11 11 11 11 11 11 11 11 14 14 14 14 14 14 13 3 3 3 3 3 3 3 3 3 1 1 1 1 1 1 1 1 1 1 1 1 1 - 0,024 0,024 0,024 0,026 0,026 0,028 0,028 0,030 0,030 0,025 0,025 0,025 0,025 0,025 0,025 0,024 14-506.0250 14-501.0220 51 44 13 13 1 1 - 0,024 0,024 14-501.0250 14-507.0250 14-502.0250 14-508.0250 14-503.0250 14-509.0250 14-504.0250 44 52 45 53 46 54 47 13 13 13 13 13 13 13 1 1 1 1 1 1 1 - 0,024 0,026 0,026 0,028 0,028 0,030 0,030 switching system: LL = Low Level switching element, SA = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 contacts: NC = normally closed, NO = normally open technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 338 01.2000 14 Pushbuttons for Standard Mounting buzzer mounting dimension plastic, black ST/ PT ST/ PT 29 mm dia. part no. 14-810.902 technical drawing front cap brass chromium-plated circuit drawing buzzer operation voltage 24 VDC connection method recommended accessories: - e 58 15 1 0,016 14-810.002 58 15 1 0,016 connection method: ST = soldering terminal; PT = plug-in terminal; PCB plug-in base page 349 technical drawing as of page 355, mounting dimensions as of page 361, circuit drawing as of page 364 14 339 01.2000 14 Pushbuttons for Flush Mounting indicator for flush mounting recommended accessories: components layout 14-040.005 14-041.006 mounting dimension ST/ PT ST UT technical drawing indicator for flush mounting 35 mm dia. part no. 14-040.002 circuit drawing connection method d lens plastic 345 d marking foil for lens plastic/metal 346 d front bezel-set for flush mounting 347 d incandescent lamp 350; LED 350 e 2 16 4 - 0,050 2 2 16 16 4 4 1 0,050 0,050 connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 marking see page 366 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 340 01.2000 14 Pushbuttons for Flush Mounting illuminated-/pushbutton for flush mounting recommended accessories: - 2NC - 2NO - 1NC + 1NO - mom 1 2 2NC + 2NO 1 2 3NC + 3NO - 4NC + 4NO - main mom main mom main mom main mom main mom main mom main mom components layout 1NO UT UT UT UT UT UT UT UT UT UT ST/ PT ST ST/ PT ST UT UT UT UT ST ST UT UT UT UT ST ST ST ST mounting dimension - connection method 1NC + 1NO main mom main mom main mom main mom main mom main contacts - technical drawing SA 1NC 35 mm dia. part no. 14-476.036 14-436.036 14-473.036 14-433.036 14-475.036 14-435.036 14-472.036 14-432.036 14-471.036 14-431.036 14-271.022 circuit drawing LL switching action illuminated-/pushbutton for flush mounting diode (1N 4007) switching system d lens plastic 345; lens metal 345 d marking foil for lens plastic/metal 346 d lens raised, plastic 345 d marking cap for lens raised plastic/metal 346 d front bezel-set for flush mounting 347 d incandescent lamp 350; LED 350 e 13 26 16 29 15 28 14 27 17 30 12 18 18 18 18 18 18 18 18 18 18 18 4 4 4 4 4 4 4 4 4 4 4 1 1 1 1 1 1 1 1 1 1 - 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,015 0,013 14-271.025 14-131.022 12 25 18 18 4 4 - 0,013 0,013 14-131.025 14-747.029 14-743.029 14-748.029 14-744.029 14-272.025 14-132.025 14-749.029 14-745.029 14-750.029 14-746.029 14-273.025 14-133.025 14-274.025 14-134.025 25 10 23 11 24 9 22 7 20 8 21 6 19 5 18 18 17 17 17 17 18 18 17 17 17 17 18 18 18 18 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1 1 1 1 1 1 1 1 - 0,013 0,014 0,014 0,014 0,014 0,015 0,015 0,016 0,016 0,016 0,016 0,017 0,017 0,019 0,019 switching system: LL = Low Level switching element, SA = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 contacts: NC = normally closed, NO = normally open description see page 331 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 341 01.2000 14 14 Pushbuttons for Flush Mounting keylock switch 2 positions for flush mounting recommended accessories: main UT 2NO main UT 1NC + 1NO main ST/ PT SA ST pos. A: basic position pos. C: momentary position standard lock1001, other lock numbers on request LL SA 2NC + 2NO main ST 3NC + 3NO main ST 4NC + 4NO main ST 1NC + 1NO 2NO 1NC + 1NO mom mom mom 2NC + 2NO 3NC + 3NO 4NC + 4NO mom mom mom UT UT ST/ PT ST ST ST ST components layout 1NC + 1NO mounting dimension LL 35 mm dia. part no. 14-415.036K 14-412.036K 14-418.036K 14-414.036K 14-411.036K 14-417.036K 14-235.022K 14-135.022K 14-335.022K 14-235.025K 14-135.025K 14-335.025K 14-236.025K 14-136.025K 14-336.025K 14-237.025K 14-137.025K 14-337.025K 14-238.025K 14-138.025K 14-338.025K 14-438.036K 14-437.036K 14-141.022K technical drawing keylock switch 2 positions for flush mounting pos. A: basic position pos. C: maintaining position standard lock 1001, other lock numbers on request key removable in A A+C C A A+C C A A+C C A A+C C A A+C C A A+C C A A+C C A A A circuit drawing A connection method C A switching action C contacts mom. 42 maint. 90 switching system d front bezel-set for flush mounting 347 d anti-twisting ring 352 e 41 41 41 42 42 42 37 37 37 37 37 37 38 38 38 39 39 39 40 40 40 35 36 31 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 19 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 1 1 1 1 1 1 1 1 - 0,030 0,030 0,030 0,030 0,030 0,030 0,029 0,029 0,029 0,029 0,029 0,029 0,031 0,031 0,031 0,033 0,033 0,033 0,035 0,035 0,035 0,030 0,030 0,029 A A A A 14-141.025K 14-142.025K 14-143.025K 14-144.025K 31 32 33 34 19 19 19 19 4 4 4 4 - 0,029 0,031 0,033 0,035 switching system: LL = Low Level switching element, SA = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 contacts: NC = normally closed, NO = normally open description see page 331 technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 342 01.2000 14 Pushbuttons for Flush Mounting selector switch 2 positions for flush mounting recommended accessories: 2NC 2NO SA 1NC + 1NO main mom main mom main mom main mom 2NC + 2NO 3NC + 3NO 4NC + 4NO main mom main mom main mom UT UT UT UT UT UT ST/ PT ST ST/ PT ST ST ST ST ST ST ST components layout 1NC + 1NO mounting dimension LL 35 mm dia. part no. 14-522.0360 14-517.0360 14-521.0360 14-516.0360 14-520.0360 14-515.0360 14-506.0220 technical drawing selector switch 2 positions for flush mounting pos. A: basic position lever short, black circuit drawing A connection method C A switching action C contacts mom. 42 maint. 90 switching system d front bezel-set for flush mounting 347 d anti-twisting ring 352 e 56 49 55 48 57 50 51 20 20 20 20 20 20 20 4 4 4 4 4 4 4 1 1 1 1 1 1 - 0,025 0,025 0,025 0,025 0,025 0,025 0,024 14-506.0250 14-501.0220 51 44 20 20 4 4 - 0,024 0,024 14-501.0250 14-507.0250 14-502.0250 14-508.0250 14-503.0250 14-509.0250 14-504.0250 44 52 45 53 46 54 47 20 20 20 20 20 20 20 4 4 4 4 4 4 4 - 0,024 0,026 0,026 0,028 0,028 0,030 0,030 switching system: LL = Low Level switching element, SA = snap-action switching element switching action: main = maintained action, mom = momentary action connection method: ST = soldering terminal; PT = plug-in terminal; UT = universal terminal; PCB plug-in base page 349 contacts: NC = normally closed, NO = normally open technical drawing as of page 355, mounting dimensions as of page 361, components layouts as of page 362, circuit drawing as of page 364 343 01.2000 14 14 Pushbuttons for Flush Mounting buzzer for flush mounting connection method: ST = soldering terminal; PT = plug-in terminal; PCB plug-in base page 349 technical drawing as of page 355, mounting dimensions as of page 361, circuit drawing as of page 364 344 01.2000 mounting dimension plastic, black ST/ PT ST/ PT 35 mm dia. part no. 14-810.918 technical drawing front cap brass chromium-plated circuit drawing buzzer for flush mounting operation voltage 24 VDC connection method recommended accessories: - e 58 21 4 0,016 14-810.910 58 21 4 0,016 14 Accessories at front lens plastic for version IP 67 use marking plate 704.609.9 shape flat lens plastic lens opaque transparent colour black blue colourless, clear green red yellow 29 mm dia. part no. 704.602.0 704.602.6 704.602.7 704.602.5 704.602.2 704.602.4 0,001 0,001 0,001 0,001 0,001 0,001 29 mm dia. part no. 704.611.7 704.611.5 704.611.2 704.611.4 0,002 0,002 0,002 0,002 e marking see page 366 lens raised, plastic for version IP 67 use marking cap 704.610.9 shape flat lens raised, plastic lens transparent colour colourless, clear green red yellow e marking see page 366 14 lens metal with window for version IP 67 use marking plate 704.609.9 lens metal with window shape flat lens aluminium anodized stainless steel colour black natural natural 29 mm dia. part no. 704.601.01 704.601.81 704.601.91 0,001 0,001 0,001 29 mm dia. part no. 704.601.0 704.601.6 704.601.5 704.601.8 704.601.2 704.601.4 704.601.9 0,001 0,001 0,001 0,001 0,001 0,001 0,001 e marking see page 366 lens metal for version IP 67 use marking plate 704.609.9 lens metal shape flat lens aluminium anodized stainless steel colour black blue green natural red yellow natural e marking see page 366 345 01.2000 14 Accessories lens cap for indicator full face illumination for version IP 67 use marking cap 704.608.9 lens cap for indicator full face illumination lens cap transparent 29 mm dia. part no. 704.603.6 704.603.7 704.603.5 704.603.2 704.603.4 0,003 0,003 0,003 0,003 0,003 40 mm dia. part no. 704.604.0 704-604.5 704.604.2 704.604.4 0,001 0,001 0,001 0,001 40 mm dia. part no. 704.614.6 704.614.7 704.614.5 704.614.2 704.614.4 0,007 0,007 0,007 0,007 0,007 colour black white colourless, clear part no. 704.609.0 704.609.9 704.609.7 0,001 0,001 0,001 colour white part no. 704.609.9 0,001 colour white colourless, clear part no. 704.610.9 704.610.7 0,001 0,001 colour blue colourless, clear green red yellow e marking see page 366 mushroom-head cap for version IP 67 use marking plate 704.609.9 mushroom opaque mushroom-head cap colour black green red yellow e mushroom-head cap illuminated for version IP 67 use marking plate 704.609.9 mushroom-head cap illuminated mushroom transparent colour blue clear green red yellow e marking foil for lens plastic/metal marking foil for lens plastic/ metal front shape round marking plate opaque translucent translucent, ribbed, for neon lamps e marking plate for mushroom-head cap marking plate for mushroom-head cap front shape round marking plate translucent e marking cap for lens raised plastic/metal marking cap for lens raised plastic/metal 346 01.2000 front shape round marking cap translucent, ribbed transparent, ribbed, for neon lamps e 14 Accessories marking cap for lens cap for indicator full face illumination marking cap for lens cap for indicator full face illumination front shape round marking cap translucent, ribbed transparent, ribbed, for neon lamps colour white colourless, clear e part no. 704.608.9 704.608.7 0,002 0,002 29 mm dia. part no. 704.600.1A 704.600.1 704.600.0 704.600.4 704.600.6 704.600.9 0,005 0,005 0,003 0,003 0,003 0,006 front ring front ring material aluminium anodized colour black natural black chromium-plated light grey natural plastic stainless steel e front bezel-set for flush mounting material aluminium anodized stainless steel colour black natural natural mounting dimension front bezel-set for flush mounting e 4 4 4 0,016 0,016 0,016 part no. 704.962.0 704.962.5 704.962.6 704.962.7 0,002 0,003 0,004 0,004 35 mm dia. part no. 704.955.0 704.955.1 704.955.9 14 mounting dimensions as of page 361 legend plate legend plate adhesive, aluminium anodized, natural, can also be engraved front dimension 30 x 42 mm for 22.5 mm dia. mounting hole 42 x 42 mm for 22.5 mm dia. mounting hole 42 x 48 mm for 30.5 mm dia. mounting hole 48 x 48 mm for 22.5 mm dia. mounting hole e protective cover hinged, transparent, with means for sealing 29 mm dia. part no. 704.925.0 technical drawing protective cover e 22 0,007 technical drawing as of page 355 347 01.2000 14 Accessories protective cover for flush mounting protective cover for flush mounting hinged, transparent, with means for sealing, aluminium anodized, natural 35 mm dia. part no. 704.928.38 704.928.18 0,007 0,007 front ring aluminium anodized part no. 704.600.3 0,005 brass, nickel plated 704.600.2 0,005 part no. 704.955.4 704.955.3 0,005 0,005 use for pushbutton, selector switch for pushbuttons e protective front ring protective front ring with transparent silicone membrane temperature resistance: -25C to +85C with transparent silicone membrane (to resist sea water) temperature resistance: -25C to +85C e protective front ring for flush mounting front ring aluminium anodized, black aluminium anodized, natural protective front ring for flush mounting with transparent silicone membrane e colour black blind plug mounting dimension blind plug e 1 0,004 part no. 14-987.1001 0,006 28 mm dia. part no. 704.960.7 mounting dimensions as of page 361 spare key spare key for standard lock 1001, else on request description as of page 331 348 01.2000 e 14 Accessories at back PCB plug-in base 16.4 mm dia. x 9.8 mm high 17,9 x 8,4 mm high With the extendable mounting the distance between PCB plug-in base and PCB can be varied up to 3mm. 17.8 mm dia. x 9.8 mm high components layout PCB plug-in base e 2 0,002 31-941 3 0,004 31-942 4 0,002 part no. 31-946 31-945 0,001 0,001 part no. 31-928 0,001 31-929 01-928 0,001 0,001 part no. 01-929 0,010 for Low Level switching element pin orientation axial part no. 31-940 Low Level switching element right-angled snap-action switching element 2.8 mm axial components layouts as of page 362 cable shoe cable shoe connection method plug-in terminal 2.8 x 0.5 mm universal terminal 2.0 x 0.5 mm e 14 insulation socket insulation socket for connector 31-945 for connector 31-946 for snap-action switching element 2.8 mm to cover the plug-in terminals e terminal cover terminal cover for snap-action switching element e 349 01.2000 14 Accessories for illumination incandescent lamp incandescent lamp base T 5.5 voltage/current 6 AC/DC/200 mA 12 AC/DC/100 mA 12 AC/DC/50 mA 24 AC/DC/25 mA 24 AC/DC/50 mA 28 AC/DC/40 mA 30 AC/DC/40 mA 36 AC/DC/35 mA 48 AC/DC/25 mA 60 AC/DC/20 mA e part no. 10-1106.1369 (01-903.0) 10-1109.1329 (01-903.1) 10-1109.1279 (01-913.12) 10-1112.1199 (01-913.24) 10-1112.1279 (01-903.2) 10-1113.1249 (01-903.28) 10-1114.1249 (01-903.3) 10-1116.1229 (01-903.4) 10-1119.1199 (01-903.5) 10-1120.1179 (01-903.6) 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 part no. 10-2109.3139 10-2112.3139 10-2113.3139 10-5106.3255 (01-968.05) 10-5106.3252 (01-968.02) 10-5106.3254 (01-968.04) 10-5109.3205 (01-968.15) 10-5109.3202 (01-968.12) 10-5109.3204 (01-968.14) 10-5112.3145 (01-968.25) 10-5112.3142 (01-968.22) 10-5112.3144 (01-968.24) 10-5113.3145 (01-968.35) 10-5113.3142 (01-968.32) 10-5113.3144 (01-968.34) 10-5119.3135 (01-968.45) 10-5119.3132 (01-968.42) 10-5119.3134 (01-968.44) 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 0,001 part no. 02-917.0 0,004 part no. 02-904.0 02-904.1 02-904.3 02-904.7 0,003 0,003 0,003 0,003 LED number of chips 1 chip LED base T 5.5 6 chips voltage/current 12 VDC/14 mA 24 VDC/14 mA 28 VDC/14 mA 6 V/45 mA 12 V/30 mA 24 V/15 mA 28 VDC/15 mA 48 V/14 mA colour white white white green red yellow green red yellow green red yellow green red yellow green red yellow e capacitor for lamp voltage reduction capacitor use with 60 VAC/20 mA, 50 Hz lamp voltage value 230 VAC/0.27 F e Please keep to the country specific security rules. series resistor for lamp voltage reduction series resistor use with 60 VAC/20 mA lamp rating Wire in accordance with local electrical safety regulations. 350 01.2000 value 110 V/2.7 kOhm 125 V/3.3 kOhm 145 V/4.7 kOhm 230-240 V/10 kOhm e 14 Accessories terminal plate empty for fitting with series resistors and capacitors no. of spaces 5 spaces 10 spaces 15 spaces 20 spaces terminal plate empty e part no. 02-912.1 02-912.2 02-912.3 02-912.4 0,025 0,045 0,090 0,095 part no. 02-914.10 02-914.20 02-914.30 02-914.40 0,045 0,090 0,135 0,180 part no. 02-913.10 02-913.20 02-913.30 02-913.40 02-913.11 02-913.21 02-913.31 02-913.41 02-913.17 02-913.27 02-913.37 02-913.47 0,040 0,075 0,115 0,155 0,040 0,075 0,115 0,155 0,040 0,075 0,115 0,155 terminal plate with capacitor value 0.27 F/230/60 V terminal plate with capacitor use with 60 VAC/20 mA lamp rating no. of components 5 spaces 10 spaces 15 spaces 20 spaces e Wire in accordance with local electrical safety regulations. terminal plate with series resistor terminal plate with series resistor use with 60 VAC/20 mA lamp rating value 2.7 kOhm/110/60 V 3.3 kOhm/125/60 V 10 kOhm/230-240/60 V no. of components 5 spaces 10 spaces 15 spaces 20 spaces 5 spaces 10 spaces 15 spaces 20 spaces 5 spaces 10 spaces 15 spaces 20 spaces e 14 Wire in accordance with local electrical safety regulations. assembling positioning insert part no. 14-910 mounting dimension positioning insert e 1 0,001 mounting dimensions as of page 361 351 01.2000 14 Accessories anti-twisting ring anti-twisting ring for flush mounting e part no. 704.954.0 0,002 part no. 704.967.0 704.960.8 0,004 0,004 part no. 700.006.0 0,003 part no. 02-906 0,002 part no. 51-996 0,024 reducing ring reducing ring for mounting of pushbutton 22.5 mm dia. in mounting hole 30.5 mm dia. colour black anodized natural anodized e lens remover lens remover for pushbuttons for flush mounting e lamp remover lamp remover e LED remover LED remover 352 01.2000 e 14 Technical Data actuator with snap-action switching element switching system Self-cleaning, double-break, snap action switching system (with contact gap 2 x 0.5 mm). 1 normally closed or 1 normally open contact per element. snap-action switching elements with soldering terminals at the sides: up to 4 switching element can be on a pushbutton (max. 4 normally closed and 4 normally open contacts). snap-action switching element with axial plug-in terminals 2,8 mm not stachable, only 1 switching element can be on a pushbutton. material actuator case polyamide material of contacts gold-plated silver switching element plug-in-/soldering terminal diallylphthalate DAP, polyamide 66, polysulfone, heat-resistant and self-extinguishing soldering terminal: PA 6.6 Ultramid mechanical characteristics actuating force 3.5-5.5 N, depending on the number of switching elements actuating torque measured at the key or lever of the keylock- or selector switch: 2.55.5 Ncm, depending on the number of switching elements actuating travel illuminated pushbutton :3 mm switch actuator with 2 positions: 1 x ca. 42 deflection momentary action 1 x ca. 90 deflection maintained action switch actuator with 3 positions: 2 x ca. 42 deflection momentary action 2 x ca. 90 deflection maintained action ambient air temperature -25C to +55C for indicators and illuminated pushbuttons mounted as a block , make sure the heat can escape freely (as per DIN IEC 68-) connection method snap-action switching element with tinned soldering terminals at the sides: max. wire diameter: 2 wires a 1.2 mm max. wire cross-section of stranded cable: 1x 1 mm2. snap-action switching element with axial plug-in terminals, which can also be used as soldering terminals: plug-in terminal: 2.8 x 0.5 mm soldering terminal: max. wire diameter: 2 wires of 1 mm max. wire cross-section of stranded cable: 2 x 0.75 mm2 or 1 x 1.0 mm2 degree of protection front as per IEC 529: IP 67 mechanical life momentary action 2 mio. cycles of operation maintained action 1 mio. cycles of operation rebound time <= 5ms resistance to climate standard condition as per IEC 68-2-3 and 2-30 changing condition as per IEC 68-2-14 and 2-33 resistance to shock (single impacts, semi-sinusoidal) 15 g for 11 ms as per IEC 512-4-3, IEC 68-2-27 resistance to vibration (sinussodial) 10 g at 10-2000 Hz, amplitude 1.5 mm as per IEC 68-2-6 storage temperature -40C to + 85C (as per DIN IEC 68-) electrical characteristics continuous thermal current lth2 5A The maximum current in continuous operation and at ambient temperature not exceeding the quoted maximum values. electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IC 512-2-11. electrostatic breakdown value <= 15 KV (keylock switch) 14 protection class II rated current 5A rated insulation voltage 250 VAC/DC as per VDE 0110, group B switch rating 250 VAC/5 A (cos 1) 250 VAC/3 A (cos 0.3) switch rating AC, cos 0,7: voltage 125 V 250 V current 3A 2A switch rating DC (inductive), L:R = 30 ms: voltage 24 V 60 V 110 V 220 V current 2A 0,7 A 0,2 A 0,1 A volume resistance starting value (initial) <= 50 m rules EN 61 058 approvals - SEV 250 VAC/5 A - CSA 300 VAC - UL - German Lloyd - OVE - VDE - Russian Marine Register declaration of conformity - CE 353 01.2000 14 Technical Data actuator with Low Level switching element switching system This low level switching element was designed for switching low powers in electronic circuits. The mechanism assures reliable switching of loads ranging from a few A/V up to 100 mA/42 VAC/ VDC. Single-break momentary contact, as normally open or normally closed with 4 independent points of contact. 2 momentary contacts per switching element; combination of normally open and normally closed is possible. Special features are the long life, extremely short rebound time and stable contact resistance. storage temperature -40C to + 85C (as per DIN IEC 68-) electrical characteristics electric strength 2500 VAC, 50 Hz, 1 min. between all terminals and earth, as per IC 512-2-11. electrostatic breakdown value <= 15 KV (keylock switch) protection class II switch rating 10 A/100 V to 100 mA at 42 VAC/VDC material actuator case polyamide material of contacts gold-plated switching element polysulfone, heat-resistant and self-extinguishing mechanical characteristics actuating force 3-4 N actuating torque measured at the key or lever of the keylock- or selector switch: 2.55.5 Ncm, depending on the number of switching elements actuating travel illuminated pushbutton :3 mm switch actuator with 2 positions: 1 x ca. 42 deflection momentary action 1 x ca. 90 deflection maintained action ambient air temperature -25C to +55C for indicators and illuminated pushbuttons mounted as a block , make sure the heat can escape freely (as per DIN IEC 68-) connection method The universal terminals permit these units to be mounted on printed circuit boards (PCB). These terminals can also be used as soldering or plug-in terminals. For these terminals we can also supply a plug-in base which, when soldered on to the board, enables the switch to be plugged in. soldering terminal: max. wire diameter: 2 wires of 1 mm max. wire cross-section of stranded cable: 2 x 0.75 mm2 plug-in terminal: 2.0 x 0.5 mm degree of protection front as per IEC 529: IP 67 mechanical life momentary action 5 mio. cycles of operation maintained action 1 mio. cycles of operation rebound time Typ. < 100 s resistance to shock (single impacts, semi-sinusoidal) 15 g for 11 ms as per IEC 512-4-3, IEC 68-2-27 354 01.2000 volume resistance starting value (initial) <= 50 m buzzer buzzer system system Piezo disc material alarm buzzer case polyamide front cap plastic: polyamide metal: nickel-plated brass sea-water proof mechanical characteristics ambient air temperature -25C to + 50C (as per DIN IEC 68-) connection method plug-in terminal 2.8 x 0.5 mm degree of protection IP 65 as per IEC 529 storage temperature -25C to + 50C (as per DIN IEC 68-) electrical characteristics frequency (tone) ca.2.8 kHz continuous tone only operation voltage/current operation voltage: 24 VDC 10% operation current: <= 25 mA sound pressure 95 db (A) 8 at a distance of 0.1 m 14 Technical Drawing, Dimension, Layout technical drawing 1 indicator front illumination, indicator full face illumination page 333 2 indicator full face illumination page 333 14 3 illuminated-/pushbutton front illumination page 334 355 01.2000 Technical Drawing, Dimension, Layout 4 illuminated-/pushbutton front illumination page 334 5 illuminated-/pushbutton front illumination page 334 6 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap page 335, 336 356 01.2000 14 14 Technical Drawing, Dimension, Layout 7 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap page 335, 336 8 illuminated pushbutton with mushroom-head cap page 336 14 9 keylock switch 2 positions page 337 357 01.2000 Technical Drawing, Dimension, Layout 10 keylock switch 2 positions page 337 11 selector switch 2 positions page 338 12 selector switch 2 positions page 338 358 01.2000 14 14 Technical Drawing, Dimension, Layout 13 selector switch 2 positions page 338 14 selector switch 2 positions page 338 14 15 buzzer page 339 16 indicator for flush mounting page 340 359 01.2000 Technical Drawing, Dimension, Layout 17 illuminated-/pushbutton for flush mounting page 341 18 illuminated-/pushbutton for flush mounting page 341 19 keylock switch 2 positions for flush mounting page 341 360 01.2000 14 14 Technical Drawing, Dimension, Layout 20 selector switch 2 positions for flush mounting page 343 21 buzzer for flush mounting page 344 14 22 protective cover page 347 mounting dimension 1 indicator front illumination, indicator full face illumination, illuminated-/pushbutton front illumination, keylock switch 2 positions, selector switch 2 positions, buzzer, blind plug, positioning insert page 333, 334, 337, 339, 338, 348, 351 361 01.2000 Technical Drawing, Dimension, Layout 14 2 pushbutton with mushroom-head cap, illuminated pushbutton with mushroom-head cap page 335, 336 3 selector switch 2 positions page 338 4 indicator for flush mounting, illuminated-/pushbutton for flush mounting, keylock switch 2 positions for flush mounting, selector switch 2 positions for flush mounting, front bezel-set for flush mounting, buzzer for flush mounting page 340, 341, 342, 343, 347, 344 components layouts 1 indicator front illumination, indicator full face illumination, illuminated-/pushbutton front illumination, pushbutton with mushroomhead cap, illuminated pushbutton with mushroom-head cap, keylock switch 2 positions, selector switch 2 positions, indicator for flush mounting, illuminated-/pushbutton for flush mounting, keylock switch 2 positions for flush mounting, selector switch 2 positions for flush mounting page 333, 334, 335, 336, 337, 338, 340, 341, 342, 343 362 01.2000 14 Technical Drawing, Dimension, Layout 2 PCB plug-in base page 349 3 PCB plug-in base page 349 4 PCB plug-in base page 349 14 363 01.2000 14 Circuit Drawing circuit drawing circuit drawing circuit drawing 1 21 42 2 22 43 3 23 44 4 24 45 5 25 46 6 26 47 7 27 48 8 28 49 9 29 50 10 30 51 11 31 52 12 32 53 13 33 54 14 34 55 15 35 56 16 36 57 17 37 58 18 38 19 39 20 40 41 364 01.2000 14 Typical Applications With indicators and illuminated pushbuttons equipped with diodes, the user is able to perform a lamp check or wire an alarm circuit simply with a considerable saving of space. 14 365 01.2000 14 Marking Indicator - Engraving of marking cap All marking plates and marking caps are engraved in lettering to DIN 1451, with black or white filling. Can also be supplied with standard lettering or symbols. For symbols see series 04. Lettering to be engraved should be specified on a separate order sheet. (available from us on request.) Height of letters mm Number of lines Number of letters per line approx. Line spacing mm b1 b2 b3 3 3 11 10 9 4,6 4 2 8 7 - 6,6 8 1 4 - - - Pushbutton/Illuminated pushbuttons - Engraving of marking plate or raised marking cap All marking plates and marking caps are engraved in lettering to DIN 1451, with black or white filling. Can also be supplied with standard lettering or symbols. Lettering to be engraved should be specified on a separate order sheet. (available from us on request.) Height of letters mm Number of lines Number of letters per line approx. Line spacing mm b1 b2 b3 3 3 9 9 7 4,6 4 2 7 6 - 6,6 8 1 3 - - - Engraving of labels All labels are engraved in lettering to DIN 1451, with black filling. Lettering to be engraved should be specified on a separate order sheet. (available from us on request.) Height of letters mm Number of lines Number of letters per line approx. L = 30 mm L = 42 mm Line spacing mm 3 2 14 20 4,5 4 1 10 14 4 8 1 5 7 2 366 01.2000