WaveLink Differential Probe System (4 GHz-6 GHz) Key Features 4 GHz or 6 GHz models Up to 5 Vpk-pk dynamic range with low noise 3 V offset range Ideal for DDR2, LPDDR2, DDR3 Innovative QuickLink architecture Wide variety of tips and leads Solder-In Lead QuickLink Solder-In Lead Positioner (Browser) Tip Adjustable (Browser) Tip Quick Connect Lead Square Pin Lead Hi-Temp Solder-In Lead * * * * * * * The WaveLink Differential Probe Series is a 4-6 GHz bandwidth active differential probe series with the widest range of tips, large offset capability, and high dynamic range. General Purpose Probe with Range of Capabilities Exceptional Waveform Fidelity Teledyne LeCroy's WaveLink 4-6 GHz loading characteristics and are Differential Probes are a general calibrated with a custom "fine- purpose probing solution with high- tuned" frequency response. The input dynamic range and offset range ultra-low loading coupled with a flat capability. The range of capabilities is frequency response ensure accurate ideal for a variety of high-speed DDR measurements. signals where high dynamic range and large offset requirements are common. WaveLink probes provide superior Unique QuickLink Architecture The unique QuickLink architecture Low loading and high impedance for minimal signal disturbance Wide Variety of Tip and Leads The wide variety of tips offered with attached or removed to a WaveLink Deluxe soft carrying case the D4x0/D6x0 provides confidence differential amplifier. Unlike other that the most challenging test points "consumable" probe tip solutions which can be probed. With seven different rely on tiny, delicate tips located very tips available, the D4x0/D6x0 provides close to the Device Under Test (DUT), great flexibility when probing, while the QuickLink Solder-In tip has an maintaining signal integrity. An integral 9-inch lead. QuickLink Solder- assortment of hands-free probe holders In tips are low cost, making it easy to eases the challenge of connecting equip multiple test points and DUTs and multiple leads to a board. eliminating time-consuming resoldering allows for probe tips to be quickly of connectors. EXCEPTIONAL WAVEFORM FIDELITY The D4x0/D6x0 probe series has superior electrical In addition to their electrical performance, WaveLink probes characteristics, providing excellent signal fidelity. These have the best-in-class mechanical design for optimum probes were designed with low loading and high impedance utility. The D4x0/D6x0 probes series includes seven for minimal signal disturbance and circuit loading. WaveLink different interconnect configurations allowing for flexibility probes use a unique calibration process where each probe when making measurements. Additionally, WaveLink probes is programmed with a custom "fine-tuned" frequency offer a variety of hands free positioners to offer stable and response which is read by the oscilloscope in order to accurate probe tip placement to make perfect contact digitally compensate for the entire system response. without the worry of hand probing errors. 2 INNOVATIVE QUICKLINK ARCHITECTURE The QuickLink probe tip system was designed from the ground up to be compatible with both the HDA125 High-speed Digital Analyzer system, and with Teledyne LeCroy's WaveLink series of differential analog probes. This cross-connection ability allows you to equip your system under test with QuickLink tips at all desired test points, and swap connections between digital and analog acquisition systems as needed. WaveMaster/SDA/DDA 8 Zi USB LBUS HDA125 HDA-DLS-18QL HDA-DLS-9QL Dxx30 Differential Amplifier Dx10-A Differential Amplifier Dx20-A Differential Amplifier Dxx30-QL Adapter Dx10-QL Adapter Dx20-QL Adapter QL-SI Solder-In Lead High Signal Fidelity Easy to connect Cost-effective When connected to a WaveLink analog probe, QuickLink tips provide 8 GHz of bandwidth and a flat, well-controlled frequency response. When used for digital acquisitions with the HDA125, they support 3 GHz bandwidth with industry-leading sensitivity. In both cases, high input impedance ensures minimal loading of the system under test. Unlike other "consumable" probe tip solutions which rely on tiny, delicate tips located very close to the device under test, the QuickLink solder-in tip has an integral 9-inch lead. This effectively relocates your test point to a more convenient location, making testing more reliable by eliminating torque and other forces on the solder joints. QuickLink solder-in tips are low-cost, making it easy to equip multiple test points and DUTs, and eliminating timeconsuming re-soldering of connectors. 3 WIDE VARIETY OF TIPS AND LEADS Offering seven different tips and leads, the D4x0/D6x0 probe series provides confidence that the most challenging test points can be probed. In addition to the various tips, an assortment of hands-free probe holders are provided to ease the challenge of connecting multiple leads to a board. Solder-In Lead (SI) The Solder-In interconnect lead features the Positioner Tip (PT) QuickLink Solder-In Lead (QL-SI) The PT positioner tips provides spring The unique QuickLink architecture allows smallest physical tip size of any high band- loaded leads to allow for easy probing. The for probe tips to be quickly attached width differential probe and the highest adjustable wheel allows for precise probing, or removed to a WaveLink differential level of electrical performance. Two very allowing a spread up to 0.14". The small amplifier. The ultra low loading design small damping resistors are directly sol- form factor provides a convenient grip for allows for unused tips to remain attached dered into the connect points for the high- hand probing, or use the wand or XYZ posi- to the DUT without impacting the signal est impedance and lowest tip inductance. tioner for more precise placement. fidelity. The resistors have highly flexible leads allowing connection to input points with a wide range of input spacing. Quick Connect (QC) The Quick Connect interconnect lead enables the probe to be quickly moved between multiple test points on the test circuit. Just solder a pair of leaded d amping resistors at each location where interconnection is required. A small connector mounted on the probe tip plugs into the damping r esistors, enabling a quick connection between sets of test points. 4 High Temperature (HiTemp) Cables and Solder-In Lead The 90 cm HiTemp cables and Solder-In lead can be used for controlled situations where the differential amplifier module needs to be removed from the extreme temperature environment. Ideally suited for testing scenarios where the temperature can fluctuate from -40 C to +105 C. Square Pin (SP) Many applications, such as IC characterization boards, use standard 0.025" square pins for interconnect. The Square Pin interconnect lead directly mates with a pair of 0.025" (0.635 mm) square pins that are mounted on standard 0.100" (2.54 mm) centers. WaveLink Differential Amplifier Modules with Adjustable Tip (-AT) WaveLink adjustable tip probes are designed to provide an optimum mechanical connection for signal measurement. * Built-in thumbwheel for precise positioning of tip -- stays put after adjustment * Maintains sharp points for good contact * Tips made of "NiTiNOL," a super-elastic nickel-titanium alloy * Flexes as you apply pressure * Consistently returns to original form Deluxe Soft Carrying Case The D4x0/D6x0 probe series includes a deluxe soft carrying case which stores all components of the complete probe system in one convenient location. The case includes a custom foam insert to securely house the platform/cable assembly and the differential probe amplifier. Additionally, a removable protective storage tray has been designed to neatly arrange the complete selection of tips/accessories for ease of accessibility. The deluxe soft carrying case can easily fit in a standard-sized file drawer or shelf for storage and is provided as part of the stadard probe configuration. 5 COMPATIBILITY AND STANDARD ACCESSORIES Compatibility Chart Platform/Cable Assembly Differential Amplifiers Tips/Leads Accessories and Replacement Parts D4x0-A D6x0-A 1 each Amplifier System (includes items below with*) *Amplifier 1 each *Solder-In Lead Set 1 each (includes items below with**) **Spare Damping Resistors for SI Tip 1 set of 5 **Tip Retaining Clip for SI & QC Leads 1 each **Adhesive Tape 1 set *Quick Connect Lead Set 1 each *Damping Resistors for QC Tip 2 sets of (Included with QC Tip) 10 *Ground Lead 1 each *Ground Clip 1 each *Square Pin Lead Set 1 each *Instruction Manual 1 each *Accessory Info Sheet & Quick Start Guide 1 each Positioner Tip with Accessories (kit includes items below with) Positioner Tip Browser Replacement Pogo-pins for Dx10-PT/Dx20-PT Positioner Tip Probe Guides XYZ Positioner Adhesive Tape for XYZ Positioner Browser Wand for PT Tip Interlock Pieces for PT Tip Swivel for PT Tip Platform/Cable Assembly Kit (includes items below with) Platform/Cable Assembly Freehand Probe Holder Probe Deskew Fixture Platform/Cable Assembly Mounting Clip Probe Cable Clamp Deluxe Soft Carrying Case Foam Insert for Deluxe Case Protective Storage Case Plastic Tray for Storage Case QuickLink Adapter QuickLink Solder-In Lead HiTemp Solder-In Lead HiTemp Cable Calibration Certificate Recommended Accessories Deskew Test Fixture Cascade Microtech EZ-Probe Positioner * Not Included in WL-PBUS2 6 Dx10-PT-KIT WL-PBUS2 D4x0-A-Pxx Dx20-PT-KIT WL-PLINK-CASE D6x0-A-Pxx 1 each Dx10-QL-3SI Dx20-QL-3SI Dx10-HiTemp Dx20-HiTemp Dx00A-AT-Pxx Replacement Part D410-A, D420-A, D610-A or D620-A 1 each 1 each Dx10-SI, Dx20-SI 1 set of 5 1 each 1 set 1 each PKxx0-SI (1 set of 20) PK600ST-3 Dxx0-PT-TAPE Dx10-QC, Dx20-QC 2 sets of 10 PKxx0-QC 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 set 1 set 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 1 each 2 each 1 each 1 each* 1 each 1 each 1 each 1 each 2 each 1 each 1 each 1 each 1 each 1 each 1 each* 1 each* 1 each 1 each 1 each 1 each 1 each 3 each 1 each 1 each 1 each 1 each 1 each 1 matched set PACC-LD005 PK006-4 Dx10-SP, Dx20-SP WL6G-OM-E 921489-00 (Dx10), 921488-00(Dx20) RK-Dx10-PT-KIT, RK-Dx20-PT-KIT Dx10-PT, Dx20-PT Dxx0-PT-TIPS Dxx0-PT-GUIDES Dxx0-PT-XYZ-POSITIONER Dxx0-PT-TAPE Dxx0-PT-WAND Dxx0-PT-INTERLOCK Dxx0-PT-SWIVEL WL-PLINK-CASE or WL-PBUS2 PACC-MS001 PCF200 PK600ST-4 includes clips and clamps PK600ST-4 includes clips and clamps SAC-03 921081-00 (WL-PLINK-CASE) or 921079-00 (WL-PBUS-CASE) 921083-00 921078-00 Dx10-QL, Dx20-QL QL-SI-1Pack Dx10-SI-HiTemp, Dx20-SI-HiTemp Dx10-Cable-HiTemp, Dx20-Cable-HiTemp See Ordering Information TF-DSQ EZ PROBE SPECIFICATIONS Bandwidth* (Probe only, guaranteed) (System bandwidth, typical) Rise Time* (10-90%) Rise Time* (20-80%) Noise (System) Input Input Dynamic Range (Nominal) Input Common Mode Voltage Range (Nominal) Input Offset Voltage Range Non-destructive Input Range (Nominal) Attenuation DC Input Resistance (Nominal) Impedance (Zmin, typical) Impedance (Mid-band, typical) CMRR (Typical) Environmental Temperature Humidity ESD Tolerance Dimensions Dx10-PT/Dx20-PT Positioner Tip and Dx00A-AT Browser Dx10-SI/Dx20-SI Dx10-QC/Dx20-QC Tips Cable Length D610-A-PB2, D610-A-PL D620-A-PB2, D620-A-PL D410-A-PB2 D420-A-PB2 Dx10-SI, Dx10-QL-SI, Dx10-HiTemp, Dx10-QC and Dx10-PT Tips 4 GHz Dx20-SI, Dx20-QL-SI, Dx20-HiTemp, Dx20-QC and Dx20-PT Tips 4 GHz Dx10-SP Tip 3 GHz Dx20-SP Tip 3 GHz Dx10-SI, Dx10-QL-SI, Dx10-HiTemp, Dx10-QC and Dx10-PT Tips 112 ps (typical) Dx20-SI, Dx20-QL-SI, Dx20-HiTemp, Dx20-QC and Dx20-PT Tips 112 ps (typical) Dx10-QC Tip 122.5 ps (typical) Dx20-QC Tip 122.5 ps (typical) Dx10-SP Tip 150 ps (typical) Dx20-SP Tip 150 ps (typical) Dx10-SI, Dx10-QL-SI, Dx10-HiTemp, Dx10-QC and Dx10-PT Tips 84 ps (typical) Dx20-SI, Dx20-QL-SI, Dx20-HiTemp, Dx20-QC and Dx20-PT Tips 84 ps (typical) Dx10-QC Tip 92 ps (typical) Dx20-QC Tip 92 ps (typical) Dx10-SI, Dx10-QL-SI and Dx10-PT Tips 6 GHz Dx20-SI, Dx20-QL-SI and Dx20-PT Tips 6 GHz Dx10-HiTemp 5 GHz Dx20-HiTemp 5 GHz Dx10-QC Tip 4 GHz Dx20-QC Tip 4 GHz Dx10-SP Tip 3 GHz Dx10-SI, Dx10-QL-SI and Dx10-PT Tips 75 ps (typical) Dx20-SP Tip 3 GHz Dx20-SI, Dx20-QL-SI and Dx20-PT Tips 75 ps (typical) Dx10-HiTemp 90 ps (typical) Dx20-HiTemp 90 ps (typical) Dx10-QC Tip 122.5 ps (typical) Dx20-QC Tip 122.5 ps (typical) Dx10-SP Tip 150 ps (typical) Dx10-SI, Dx10-QL-SI and Dx10-PT Tips 56 ps (typical) Dx20-SP Tip 150 ps (typical) Dx20-SI, Dx20-QL-SI and Dx20-PT Tips 56 ps (typical) Dx10-HiTemp 67.5 ps (typical) Dx20-HiTemp 67.5 ps (typical) Dx10-QC Tip 92 ps (typical) Dx20-QC Tip 92 ps (typical) Dx10-SP Tip 113 ps (typical) <36 nV/Hz (2.8 mVrms) (typical) Referred to input, 6 GHz bandwidth Dx20-SP Tip 113 ps (typical) <61 nV/Hz (4.8 mVrms) (typical) Referred to input, 6 GHz bandwidth Dx10-SP Tip 113 ps (typical) Dx20-SP Tip 113 ps (typical) <36 nV/Hz (2.3 mVrms) (typical) Referred to input, 4 GHz bandwidth <67 nV/Hz (4.3 mVrms) (typical) Referred to input, 4 GHz bandwidth 2.5Vpk-pk, 1.25V 5Vpk-pk, 2.5V 2.5Vpk-pk, 1.25V 5Vpk-pk, 2.5V D600A-AT-PB2, D600A-AT-PL D400A-AT-PB2 6 GHz 4 GHz <75 ps (typical) <112 ps (typical) 56 ps (typical) 84 ps (typical) <74 nV/Hz (5.8 mVrms) (typical) Referred to input, 6 GHz bandwidth <74 nV/Hz (4.7 mVrms) (typical) Referred to input, 4 GHz bandwidth 4.8Vpk-pk, 2.4V 4 V 1.7X / 1.0X (nominal) Dx10-SI, Dx10-QL-SI, and Dx10-HiTemp >175 Differential 2.4 Vmax 3 V Differential (nominal) n/a 20 V 18 V 3.2X / 1.9X (nominal) 1.7X / 1.0X (nominal) 200 k Differential 50 k Common Mode Dx20-SI, Dx20-QL-SI, Dx10-SI, Dx10-QL-SI, and Dx20-HiTemp and Dx10-HiTemp >250 Differential >200 Differential 3.2X / 1.9X (nominal) Dx20-SI, Dx20-QL-SI, and Dx20-HiTemp >350 Differential Dx10-PT Tip >175 Differential Dx20-PT Tip >175 Differential Dx10-PT Tip >175 Differential Dx20-PT Tip >175 Differential Dx10-QC Tip >125 Differential Dx20-QC Tip >125 Differential Dx10-QC Tip >100 Differential Dx20-QC Tip >100 Differential Dx10-SP Tip >40 Differential Dx10-SI, Dx10-QL-SI, and Dx10-HiTemp 275 at 3 GHz, 175 at 6 GHz Dx20-SP Tip >40 Differential Dx20-SI, Dx20-QL-SI, and Dx20-HiTemp 475 at 3 GHz, 250 at 6 GHz Dx10-SP Tip >40 Differential Dx10-SI, Dx10-QL-SI, and Dx10-HiTemp 400 at 2 GHz, 200 at 4 GHz Dx20-SP Tip >40 Differential Dx20-SI, Dx20-QL-SI, and Dx20-HiTemp 700 at 2 GHz, 350 at 4 GHz Dx10-PT Tip 200 at 3 GHz, 200 at 6 GHz Dx20-PT Tip 200 at 3 GHz, 200 at 6 GHz Dx10-PT Tip 275 at 2 GHz, 175 at 4 GHz Dx20-PT Tip 275 at 2 GHz, 175 at 4 GHz Dx10-QC Tip 125 at 3 GHz, 125 at 6 GHz Dx20-QC Tip 125 at 3 GHz, 200 at 6 GHz Dx10-QC Tip 150 at 2 GHz, 125 at 4 GHz Dx20-QC Tip 150 at 2 GHz, 150 at 4 GHz Dx20-SP Tip Dx10-SP Tip 40 at 3 GHz, 40 at 3 GHz, 175 at 6 GHz 100 at 6 GHz 30 dB DC to 10 MHz 26 dB 10 MHz to 6 GHz Dx10-SP Tip Dx20-SP Tip 75 at 2 GHz, 75 at 2 GHz, 15 at 4 GHz 15 at 4 GHz 30 dB DC to 10 MHz 26 dB 10 MHz to 4 GHz 2.5X 4 k Differential 1 k Common Mode >200 Differential >450 Differential through entire frequency range 650 at 3 GHz, 200 at 6 GHz (Differential) 1000 at 2 GHz, 450 at 4 GHz (Differential) >40 dB DC to 1 GHz >30 dB 1 GHz to 3 GHz >20 dB to 6 GHz >40 dB DC to 1 GHz >30 dB 1 GHz to 3 GHz >20 dB 3 GHz to 4 GHz Operating: 0 C to 40 C; Non-operating: -40 C to 70 C Operating: 5% to 80% RH (non-condensing), 50% RH above 30 C Non-operating: 5% to 95% RH (non-condensing), 75% RH above 30 C and 45% RH above 40 C 2 kV (typical), 100 pF, 300 HBM 0 to 3.5 mm (0 to 0.14"), 305 m (0.012") diameter 0.55 mm (0.022") Z-axis compliance 0 to 3.0 mm (0 to 0.12"), 75 m diameter 2 mm Z-axis compliance 0 to 11 mm (0 to 0.43") tip spread at circuit connection NA 1.3 m (4 ft. 3 in) for both WL-PLINK and WL-PBUS2 * All Bandwidth and Rise Time measurements are made with an oscilloscope bandwidth greater or equal to the probe bandwidth Through entire frequency range ORDERING INFORMATION Product Description Complete Differential Probes Product Code 4 GHz ProBus2 Differential Probe with Dx10-SI Solder-In Tip (Qty. 1), Dx10-SP Square Pin (Qty. 1), and Dx10-QC Quick Connect (Qty. 1) 4 GHz ProLink Differential Probe with Dx10-SI Solder-In Tip (Qty. 1), Dx10-SP Square Pin (Qty. 1), and Dx10-QC Quick Connect (Qty. 1) 4 GHz ProBus2 Differential Probe with Dx20-SI Solder-In Tip (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-QC Quick Connect (Qty. 1) 4 GHz ProLink Differential Probe with Dx20-SI Solder-In Tip (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-QC Quick Connect (Qty. 1) 6 GHz ProBus2 Differential Probe with Dx10-SI Solder-In Tip (Qty. 1), Dx10-SP Square Pin (Qty. 1), and Dx10-QC Quick Connect (Qty. 1) 6 GHz ProLink Differential Probe with Dx10-SI Solder-In Tip (Qty. 1), Dx10-SP Square Pin (Qty. 1), and Dx10-QC Quick Connect (Qty. 1) 6 GHz ProBus2 Differential Probe with Dx20-SI Solder-In Tip (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-QC Quick Connect (Qty. 1) 6 GHz ProLink Differential Probe with Dx20-SI Solder-In Tip (Qty. 1), Dx20-SP Square Pin (Qty. 1), and Dx20-QC Quick Connect (Qty. 1) 4 GHz ProBus2 Differential Probe with Adjustable Tip 6 GHz ProBus2 Differential Probe with Adjustable Tip 6 GHz ProLink Differential Probe with Adjustable Tip Positioner Tip (Browser) Kits WaveLink Dx10-PT Adjustable Positioner Tip Kit. For use with Dx10 amplifiers. WaveLink Dx20-PT Adjustable Positioner Tip Kit. For use with Dx20 amplifiers. QuickLink Solder-In Tip Set QuickLink Solder-In starter pack for use with Dx10 amplifier. Includes one QuickLink adapter and three QL-SI tips. QuickLink Solder-In starter pack for use with Dx20 amplifier. Includes one QuickLink adapter and three QL-SI tips. Hi-Temp Leads WaveLink Temperature Extension Cables for Dx10. Includes set of Matched 30" High Temperature Cables (Qty. 1) and solder-in lead set (Qty. 1) WaveLink Temperature Extension Cables for Dx20. Includes set of Matched 30" High Temperature Cables (Qty. 1) and solder-in lead set (Qty. 1) D410-A-PB2 D410-A-PL D420-A-PB2 D420-A-PL D610-A-PB2 D610-A-PL D620-A-PB2 D620-A-PL D400A-AT-PB2 D600A-AT-PB2 D600A-AT-PL Dx10-PT-KIT Dx20-PT-KIT Dx10-QL-3SI Dx20-QL-3SI Dx10-HiTemp Dx20-HiTemp Product Description Accessories Product Code Cascade Microtech EZ-Probe Positioner Probe Deskew and Calibration Test Fixture Calibration Options NIST Calibration for D410-A. Includes test data. NIST Calibration for D420-A. Includes test data. NIST Calibration for D610-A. Includes test data. NIST Calibration for D620-A. Includes test data. NIST Calibration for D400A-AT. Includes test data. NIST Calibration for D600A-AT. Includes test data. EZ PROBE TF-DSQ D410-A-CCNIST D420-A-CCNIST D610-A-CCNIST D620-A-CCNIST D400A-AT-CCNIST D600A-AT-CCNIST Replacement Parts Single replacement QuickLink Solder-In Tip 9-pack of replacement QuickLink Solder-In Tip Replacement Dx10-SI 4 & 6 GHz Solder-In Lead with Qty. 5 Spare Resistors. Replacement Dx20-SI 4 & 6 GHz Solder-In Lead with Qty. 5 Spare Resistors. Replacement Dx10-QC 4 & 6 GHz Quick Connect Lead Replacement Dx20-QC 4 & 6 GHz Quick Connect Lead Replacement Dx10-SP 4 & 6 GHz Square Pin Lead Replacement Dx20-SP 4 & 6 GHz Square Pin Lead Replacement SI Resistor Kit for Dx10/Dx20 - Kit of 20 Replacement QC Resistor Kit for Dx10/Dx20 - 2 kits of 20 Qty. 4 Replacement Pogo Pin Tips and Qty. 2 Replacement Sockets for Dx10-PT and Dx20-PT Adjustable Positioner Tips. Replacement Probe Tip Holder Kit Replacement Platform/Cable Assembly Mounting Kit Quantity 1 Package of Black Adhesive Pads (10/pkg) and Quantity 1 Package of White Adhesive Pads (10/pkg) Quantity 1 Package of Adhesive Probe Connection Guides (200 individual guides/package) QL-SI-1Pack QL-SI-9Pack Dx10-SI Dx20-SI Dx10-QC Dx20-QC Dx10-SP Dx20-SP PKxx0-SI PKxx0-QC Dxx0-PT-TIPS PK600ST-3 PK600ST-4 Dxx0-PT-TAPE Dxx0-PT-GUIDES Customer Service Teledyne LeCroy oscilloscopes and probes are designed, built, and tested to ensure high reliability. In the unlikely event you experience difficulties, our digital oscilloscopes are fully warranted for three years and our probes are warranted for one year. This warranty includes: * No charge for return shipping * Long-term 7-year support * Upgrade to latest software at no charge 1-800-5-LeCroy teledynelecroy.com Local sales offices are located throughout the world. Visit our website to find the most convenient location. (c) 2018 by Teledyne LeCroy, Inc. All rights reserved. Specifications, prices, availability, and delivery subject to change without notice. Product or brand names are trademarks or requested trademarks of their respective holders. wavelinklowspeed-ds-07may18 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Teledyne LeCroy: DX20-SI DX20-SP DX10-SP DX10-QC DX20-PT DX20-QC DX10-SI PKXX0-SI