SA15CA - Fairchild Semiconductor

SA5.0(C)A - SA170(C)A

SA5.0(C)A - SA170(C)A, Rev. A

SA5.0(C)A - SA170(C)A

500 Watt Transient Voltage Suppressors

Absolute Maximum Ratings* TA = 25°C unless otherwise noted

1998 Fairchild Semiconductor Corporation

Symbol Parameter Value Units

PPPM Peak Pul se P ower Dissipation on 10/1000 µs waveform minimum 500 W

IPPM Peak Pul se Current on 10/1000 µs waveform see table A

PM(AV) Steady State Power Dissipation

.375 " lead length @ TA = 75°C1.0 W

if(surge) Peak Forward Surge Current

superimposed on rated load (JEDEC method) (Note 1) 70 A

Tstg Storage Temperat ure Range -65 to +175 °C

TJOperating Juncti on Temperature -65 to +175 °C

Features

•Glass passivated junction.

•500W Peak Pulse Power capability on

10/1000 µs waveform.

•Excellent clamping capability.

•Low incremental surge resistance.

•Fast response time; typically less

than 1.0 ps from 0 volts to BV for

unidirectional and 5.0 ns for

bidirectional.

•Typical IR less than 1.0 µA above 10V.

1.0 min (25.4)

0.140 (3.56)

0.104 (2.64)

0.034 (0.86)

0.028 (0.71)

0.300 (7.62)

0.230 (5.84)

Dimensions in

inches (mm)

DEVICES FOR BIPOLAR APPLICA TIONS

- Bidirectional types use CA suffix.

- Electrical Characteristics apply in both directions.

DO-15

COLOR BAND DENOTES CATHODE

EXCEPT BIPOLAR

*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.

Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.

SA5.0(C)A - SA170(C)A

SA5.0(C)A - SA170(C)A, Rev. A

Transient Voltage Supressors

(continued)

Electrical Characteristics TA = 25°C unless otherwise noted

* For bidirectional parts with VRWM<10V, the IR max limit is doubled.

Uni-directional

Bi-directional (C)

Device

Reverse

Stand-off Voltage

VRWM (V)

Breakdown Volta

g

e

VBR (V)

min max

Test

Current

IT (mA)

Max Clamping

Voltage @IPPM

VC (V)

Max Pe ak Pulse

Surge Current

IPPM (A)

Max Reverse

Leakag e VRWM

IR (uA)*

SA5.0(C)A 5.0 6.40 7.00 10 9.2 54. 3 600

SA6.0(C)A 6.0 6.67 7.37 10 10.3 48.5 600

SA6.5(C)A 6.5 7.22 7.98 10 11.2 44.7 400

SA7.0(C)A 7.0 7.78 8.60 10 12.0 41.7 150

SA7.5(C)A 7.5 8.33 9.21 1.0 12.9 38. 8 50

SA8.0(C)A 8.0 8.89 9.83 1.0 13.6 36. 7 25

SA8.5(C)A 8.5 9.44 10.4 1.0 14.4 34.7 10

SA9.0(C)A 9.0 10.0 11.1 1.0 15.4 32.5 5

SA10(C)A 10 11.1 12.3 1.0 17.0 29.4 1

SA11(C)A 11 12.2 13.5 1.0 18.2 27.4 1

SA12(C)A 12 13.3 14.7 1.0 19.9 25.1 1

SA13(C)A 13 14.4 15.9 1.0 21.5 23.2 1

SA14(C)A 14 15.6 17.2 1.0 23.2 21.5 1

SA15(C)A 15 16.7 18.5 1.0 24.4 20.6 1

SA16(C)A 16 17.8 19.7 1.0 26.0 19.2 1

SA17(C)A 17 18.9 20.9 1.0 27.6 18.1 1

SA18(C)A 18 20.0 22.1 1.0 29.2 17.2 1

SA20(C)A 20 22.2 24.5 1.0 32.4 15.4 1

SA22(C)A 22 24.4 26.9 1.0 35.5 14.1 1

SA24(C)A 24 26.7 29.5 1.0 38.9 12.8 1

SA26(C)A 26 28.9 31.9 1.0 42.1 11.9 1

SA28(C)A 28 31.1 34.4 1.0 45.4 11.0 1

SA30(C)A 30 33.3 36.8 1.0 48.4 10.3 1

SA33(C)A 33 36.7 40.6 1.0 53.3 9.4 1

SA36(C)A 36 40.0 44.2 1.0 58.1 8.6 1

SA40(C)A 40 44.4 49.1 1.0 64.5 7.8 1

SA43(C)A 43 47.8 52.8 1.0 69.4 7.2 1

SA45(C)A 45 50.0 55.3 1.0 72.7 6.9 1

SA48(C)A 48 53.3 58.9 1.0 77.4 6.5 1

SA51(C)A 51 56.7 62.7 1.0 82.4 6.1 1

SA54(C)A 54 60.0 66.3 1.0 87.1 5.7 1

SA58(C)A 58 64.4 71.2 1.0 93.6 5.3 1

SA60(C)A 60 66.7 73.7 1.0 96.8 5.2 1

SA64(C)A 64 71.1 78.6 1.0 103.0 4.9 1

SA70(C)A 70 77.8 86.0 1.0 113.0 4.4 1

SA75(C)A 75 83.3 92.1 1.0 121.0 4.1 1

SA78(C)A 78 86.7 95.8 1.0 126.0 4.0 1

SA85(C)A 85 94.4 104.0 1.0 137.0 3.6 1

SA90(C)A 90 100.0 111.0 1.0 146.0 3. 4 1

SA100(C)A 100 111.0 123.0 1.0 162.0 3.1 1

SA110(C)A 110 122.0 135.0 1.0 177.0 2.8 1

SA120(C)A 120 133.0 147.0 1.0 193.0 2.7 1

SA130(C)A 130 144.0 159.0 1.0 209.0 2.4 1

SA150(C)A 150 167.0 185.0 1.0 243.0 2.1 1

SA160(C)A 160 178.0 197.0 1.0 259.0 1.9 1

SA170(C)A 170 189.0 209.0 1.0 275.0 1.8 1

SA5.0(C)A - SA170(C)A

SA5.0(C)A - SA170(C)A, Rev. A

Transient Voltage Supressors

(continued)

Typical Characteristics

Steady State Power Derating Curve

0 25 50 75 100 125 150 175 200

0

0.2

0.4

0.6

0.8

1

1.2

1.4

1.6

L EAD TEMP ER ATURE ( C )

PO W ER DIS SIPATION ( W )

º

Pul se De ratin g Curve

0 25 50 75 100 125 150 175 200

0

25

50

75

100

AM BI ENT TEMP E RATURE ( C )

PULSE PO WER ( %)

º

Non -Repetit ive Surge Curre nt

12 51020 50100

10

20

50

100

N UMB E R OF CYCL E S AT 6 0Hz

FORWARD SURGE CURRENT (A)

T = T max

8.3m s Single Half Sine-Wave

JEDEC Met hod

A A

Pulse Wav ef orm

01234

0

50

100

150

TIME (ms)

PE AK PULSE C URRENT (% )

T = 25 C

º

A

Pulse Widt h (td) is D ef ined

as the Po int W here t h e Peak

Current Decays to 50% of Ipp

10/1000µs ec Wavefor m

a s Defined by R.E.A.

tf = 10µsec

e-kt

Pea k V alue

Ippm

Half Value-Ipp

2

td

Peak Pu lse Po wer Rating Curve

0.0001 0.001 0.01 0.1 1 10

0.1

1

10

100

PULSE WIDTH (ms)

P ULS E POWER (kW )

T = 25 C

º

A

Juncti on Capac i tan ce - Unidirec tion al

1 5 10 50 100 200

10

20

50

100

200

500

1000

2000

4000

6000

REVERSE VOLTAGE (V)

CAPACI TANCE (pF)

T = 25 C

º

A

f = 1.0 MHz

Visg = 50m Vp-p

Measured at

Zero Bias

Measured at

Stand-Off

Voltag e (V mw)

DO-15 (FS PKG Code P2)

DO-15 Package Dimensions

August 1999, Rev. A

1:1

Scale 1:1 on letter size paper

Dimensions shown below are in:

inches [millimeters]

Part Weight per unit (gram): 0.4

1.0 min (25.4)

0.140 (3.56)

0.104 (2.64)

0.034 (0.86)

0.028 (0.71)

0.300 (7.62)

0.230 (5.84)

∅

TRADEMARKS

ACEx™

CoolFET™

CROSSVOLT™

E2CMOSTM

FACT™

FACT Quiet Series™

FAST®

FASTr™

GTO™

HiSeC™

The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is

not intended to be an exhaustive list of all such trademarks.

LIFE SUPPORT POLICY

FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT

DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROV AL OF FAIRCHILD SEMICONDUCTOR CORPORA TION.

As used herein:

ISOPLANAR™

MICROWIRE™

POP™

PowerTrench™

QS™

Quiet Series™

SuperSOT™-3

SuperSOT™-6

SuperSOT™-8

TinyLogic™

1. Life support devices or systems are devices or

systems which, (a) are intended for surgical implant into

the body, or (b) support or sustain life, or (c) whose

failure to perform when properly used in accordance

with instructions for use provided in the labeling, can be

reasonably expected to result in significant injury to the

user.

2. A critical component is any component of a life

support device or system whose failure to perform can

be reasonably expected to cause the failure of the life

support device or system, or to affect its safety or

effectiveness.

PRODUCT ST A TUS DEFINITIONS

Definition of Terms

Datasheet Identification Product Status Definition

Advance Information

Preliminary

No Identification Needed

Obsolete

This datasheet contains the design specifications for

product development. Specifications may change in

any manner without notice.

This datasheet contains preliminary data, and

supplementary data will be published at a later date.

Fairchild Semiconductor reserves the right to make

changes at any time without notice in order to improve

design.

This datasheet contains final specifications. Fairchild

Semiconductor reserves the right to make changes at

any time without notice in order to improve design.

This datasheet contains specifications on a product

that has been discontinued by Fairchild semiconductor.

The datasheet is printed for reference information only.

Formative or

In Design

First Production

Full Production

Not In Production

DISCLAIMER

FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER

NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD

DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT

OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS P ATENT

RIGHTS, NOR THE RIGHTS OF OTHERS.

UHC™

VCX™