Features * * * * * * Glass passivated junction. 500W Peak Pulse Power capability on 10/1000 s waveform. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 A above 10V. 1.0 min (25.4) Dimensions in inches (mm) 0.300 (7.62) 0.230 (5.84) DO-15 0.140 (3.56) 0.104 (2.64) COLOR BAND DENOTES CATHODE EXCEPT BIPOLAR 0.034 (0.86) 0.028 (0.71) DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 500 Watt Transient Voltage Suppressors Absolute Maximum Ratings* Symbol TA = 25C unless otherwise noted Parameter PPPM Peak Pulse Power Dissipation on 10/1000 s waveform IPPM Peak Pulse Current on 10/1000 s waveform PM(AV) Tstg Steady State Power Dissipation .375 " lead length @ TA = 75C Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range TJ Operating Junction Temperature if(surge) (Note 1) Value Units minimum 500 W see table A 1.0 W 70 -65 to +175 A C -65 to +175 C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum. 1998 Fairchild Semiconductor Corporation SA5.0(C)A - SA170(C)A, Rev. A SA5.0(C)A - SA170(C)A SA5.0(C)A - SA170(C)A (continued) Electrical Characteristics Uni-directional Bi-directional (C) Device Reverse Stand-off Voltage VRWM (V) SA5.0(C)A SA6.0(C)A SA6.5(C)A SA7.0(C)A SA7.5(C)A SA8.0(C)A SA8.5(C)A SA9.0(C)A SA10(C)A SA11(C)A SA12(C)A SA13(C)A SA14(C)A SA15(C)A SA16(C)A SA17(C)A SA18(C)A SA20(C)A SA22(C)A SA24(C)A SA26(C)A SA28(C)A SA30(C)A SA33(C)A SA36(C)A SA40(C)A SA43(C)A SA45(C)A SA48(C)A SA51(C)A SA54(C)A SA58(C)A SA60(C)A SA64(C)A SA70(C)A SA75(C)A SA78(C)A SA85(C)A SA90(C)A SA100(C)A SA110(C)A SA120(C)A SA130(C)A SA150(C)A SA160(C)A SA170(C)A 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 TA = 25C unless otherwise noted Breakdown Voltage VBR (V) min max 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100.0 111.0 122.0 133.0 144.0 167.0 178.0 189.0 7.00 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.3 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104.0 111.0 123.0 135.0 147.0 159.0 185.0 197.0 209.0 Test Current IT (mA) 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max Clamping Voltage @IPPM VC (V) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 Max Peak Pulse Surge Current IPPM (A) 54.3 48.5 44.7 41.7 38.8 36.7 34.7 32.5 29.4 27.4 25.1 23.2 21.5 20.6 19.2 18.1 17.2 15.4 14.1 12.8 11.9 11.0 10.3 9.4 8.6 7.8 7.2 6.9 6.5 6.1 5.7 5.3 5.2 4.9 4.4 4.1 4.0 3.6 3.4 3.1 2.8 2.7 2.4 2.1 1.9 1.8 Max Reverse Leakage VRWM IR (uA)* 600 600 400 150 50 25 10 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 * For bidirectional parts with VRWM<10V, the IR max limit is doubled. SA5.0(C)A - SA170(C)A, Rev. A SA5.0(C)A - SA170(C)A Transient Voltage Supressors (continued) Typical Characteristics Pulse Derating Curve Peak Pulse Power Rating Curve 100 PULSE POWER (%) PULSE POWER (kW) 100 TA = 25 C 10 1 0.001 0.01 0.1 PULSE WIDTH (ms) 1 tf = 10sec Peak Value Ippm td 2 TIME (ms) 3 Measured at Zero Bias 500 Measured at Stand-Off Voltage (V mw) 200 100 50 Steady State Power Derating Curve 1 5 10 50 REVERSE VOLTAGE (V) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 25 50 75 100 125 150 LEAD TEMPERATURE ( C) 175 100 200 Non-Repetitive Surge Current 100 FORWARD SURGE CURRENT (A) POWER DISSIPATION (W) TA = 25 C f = 1.0 MHz Visg = 50m Vp-p 1000 10 4 1.6 0 200 20 e-kt 1 50 75 100 125 150 175 AMBIENT TEMPERATURE ( C) 2000 10/1000sec Waveform as Defined by R.E.A. 0 25 6000 4000 TA = 25 C Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of Ipp Half Value-Ipp 2 50 0 Junction Capacitance - Unidirectional CAPACITANCE (pF) PEAK PULSE CURRENT (%) 25 10 Pulse Waveform 150 0 50 0 0.1 0.0001 100 75 200 T A = T Amax 8.3ms Single Half Sine-Wave JEDEC Method 50 20 10 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 SA5.0(C)A - SA170(C)A, Rev. A SA5.0(C)A - SA170(C)A Transient Voltage Supressors DO-15 Package Dimensions DO-15 (FS PKG Code P2) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.4 1.0 min (25.4) 0.300 (7.62) 0.230 (5.84) 0.140 (3.56) 0.104 (2.64) 0.034 (0.86) 0.028 (0.71) August 1999, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.