WJ119 FEATURES: * Switching capacity up to 25A * PC pins and quick connect terminals * Uses include household appliances * High inrush capability * Strong resistance to shock and vibration E197852 30.5 x 15.8 x 26.8 (36.5) mm CONTACT DATA Contact Arrangement Contact Rating Contact Resistance Contact Material Maximum Switching Power Maximum Switching Voltage Maximum Switching Current 1A = SPST N.O. 25A @ 277VAC Resistive 20A @ 250VAC General Purpose 1-1/2 hp @ 250VAC 1hp @ 125VAC < 50 milliohms initial AgSnO2 6380 VA 300VAC 25A COIL DATA Coil Voltage VDC Rated Max. 5 6 9 12 24 48 110 6.5 7.8 11.7 15.6 31.2 62.4 142.8 Coil Resistance 10% .9W 28 40 90 160 640 2560 13444 Pick Up Voltage VDC (max) Release Voltage VDC (min) 75% of rated voltage 5% of rated voltage 3.75 4.50 6.75 9.00 18.00 36.00 82.50 .25 .30 .45 .60 1.2 2.4 5.5 Coil Power W Operate Time ms Release Time ms .9 20 10 CAUTION: 1. The use of any coil voltage less than the rated coil voltage may compromise the operation of the relay. 2. Pickup and release voltages are for test purposes only and are not to be used as design criteria. GENERAL DATA Electrical Life @ rated load Mechanical Life Insulation Resistance Dielectric Strength, Coil to Contact Contact to Contact Shock Resistance Vibration Resistance Terminal (Copper Alloy) Strength Operating Temperature Storage Temperature Solderability Weight 100K cycles, typical 10M cycles, typical 100M min @ 500VDC 2000V rms min. @ sea level 1000V rms min. @ sea level 100m/s2 for 11ms 1.5mm double amplitude 10-40Hz 10N -30 C to + 55 C -40 C to + 85 C 230 C 2 C for 10 0.5s 28g Distributor: Electro-Stock www.electrostock.com Tel: 630-682-1542 Fax: 630-682-1562 WJ119 Distributor: Electro-Stock www.electrostock.com Tel: 630-682-1542 Fax: 630-682-1562 ORDERING INFORMATION 1. Series: WJ119 2.Contact Arrangement: 1A = SPST N.O. 3. Terminal Options: Blank = Quick Connects and PC Pins P = PC Pins Only 4. Coil Voltage: 5VDC 6VDC 9VDC 12VDC 24VDC 48VDC 110VDC WJ119 1A 12VDC DIMENSIONS (Units = mm) QUICK CONNECT TERMINALS AND PC PINS P = PC PINS ONLY SCHEMATICS & PC LAYOUTS (BOTTOM VIEWS) 1A ** The contacts are connected to the quick connect terminals on top of the relay as well as the PC terminals.