Mill-Max-Mfg.Corp.,P.O .Bo x 300, 190 Pine Hollow Road,Oyster Bay, NY 11771-0300.T el:516-922-6000 F ax: 516-922-9253
105
SPECIFY PLATING CODE XX= 93
Sleeve (Pin)
Contact (Clip)
200µ” Sn/Pb
30µ”Au
SURFACE MOUNT PIN GRID ARRAYS
For Interstitial Patterns
Female Socket
Series 513
SMT RECEPTACLE
TYPE 1385
FOR PGA MALE HEADER
1. Locate footpr int patter n from pages 107 to 111, the middle 8 digits of
the par t number will be located under the patter n.
Determined from footprint patter n pages 107 to 111
No. of pins Grid size Patter n #
Window
507 10 437
----
Series Plating
Code
Ordering Information
• Series 507 SMT Headers “float” in
a machined epoxy insulator.
• Series 513 Interstitial PGA
surf ace mount sockets are available
with and without tabs for clip-on
heatsinks.
•Mill-Max #43, “Ultra-Lite” contact
standard, see page 209 for
details.
•Hi-Temp PCT polyester insulator
material suitable for all forms of
soldering.
FOR PGA FEMALE SOCKET
1. Specify 2-digit plating code from char t at bottom of page.
2. Locate footpr int patter n from pages 107 to 111, the middle 8 digits of
the par t number will be located under the patter n.
Determined from footprint patter n pages 107 to 111
No. of pins Grid size Patter n #
Window
513 0 8 5
----
Series Plating
Code
HEADER PIN
TYPE 0737
SPECIFY PLATING CODE XX= 10
Pin Plating 10µ” Au
