TECHNICAL DATA SHEET
SMP
STRAIGHT JACK
19K101-272E4
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Tel.: +49 8684 18-0
Page
P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499
www.rosenberger.de email: info@rosenberger.de
1 / 2
RF_35/12.04/3.0
All dimensions are in mm; tolerances acc. ISO 2768 m-H
Interface
According to MIL-STD-348A, Fig. 326
Documents
Assembly instruction 19 E4
Material and plating
Connector parts Material Plating
Center contact Beryllium copper Gold, min. 0.8 µm, over chemical nickel
Outer contact Beryllium copper Gold, min. 0.8 µm, over chemical nickel
Dielectric PTFE
TECHNICAL DATA SHEET
SMP
STRAIGHT JACK
19K101-272E4
Rosenberger Hochfrequenztechnik GmbH & Co. KG
Tel.: +49 8684 18-0
Page
P.O.Box 1260 D-84526 Tittmoning Germany Fax: +49 8684 18-499
www.rosenberger.de email: info@rosenberger.de
2 / 2
RF_35/12.04/3.0
f(GHz)
Electrical data
Impedance 50 Ω
Frequency DC to 26.5 GHz
Return loss ≥ 32 dB, DC to 4 GHz
≥ 30 dB, 4 to 8 GHz
≥ 20 dB, 8 to 18 GHz
Insertion loss ≤ 0.05 x dB, DC to 18 GHz
Insulation resistance ≥ 5 GΩ
Center contact resistance ≤ 6.0 mΩ
Outer contact resistance ≤ 2.0 mΩ
Test voltage 500 V rms
Working voltage 335 V rms
Contact Current 1.2A DC max.
- Limitations are possible due to the used cable type –
Mechanical data
Mating cycles
if mating part is smooth bore ≥ 1000
if mating part is limited detent ≥ 500
if mating part is full detent ≥ 100
Center contact captivation ≥ 7 N
Engagement force
- smooth bore 9 N max.
- limited detent 45 N max.
- full detent 68 N max.
Disengagement force
- smooth bore 2.2 N min.
- limited detent 9 N min.
- full detent 22 N min.
Environmental data
Temperature range -65°C to +155°C
Thermal shock MIL-STD-202, Method 107, Condition B
Vibration MIL-STD-202, Method 204, Condition B
Shock MIL-STD-202, Method 213, Condition A
Moisture resistance MIL-STD-202, Method 106
Tooling
N/A
Suitable cables
UT 141-SA-M17, RG 402 /U
Packing
Standard 100 pcs in bag
Weight 0.25 g/pce
Draft Date Approved Date Rev. Engineering change number Name Date
Inge Mühlauer 17/08/04 Chr. Entsfellner 23/02/05 a00 04-0130 Rong Fang 14/02/05
While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on
our part and
no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our
products, we reserve the right to make changes judged to be necessary.
