AmbiMate SENSOR MODULE MS4 Series TE Connectivity (TE)'s AmbiMate sensor module MS4 series provides an application specific set of sensors on a ready to attach PCB assembly for easy integration into a host product. Design resources are freed and time to market accelerated by integrating the MS4 series pre-engineered, four core sensor solution for Motion / Light / Temperature / Humidity into your next product. Other MS4 series sensor modules include VOC (Volatile Organic Compound), eCO2 (equivalent carbon dioxide ) and sound detection. Add the capability to monitor air quality through the capture of VOC concentrations. Select an MS4 series with a microphone to augment motion detection or to listen for sound events. All MS4 series sensor modules offer the flexibility of sharing a common seven position connection. This allows the designer to layout a single PCB footprint accommodating all the available sensor configurations at production. Applications Benefits *Indoor Lighting * Design resources are freed and *Building Automation time to market is accelerated *Connected Home * Simplicity of popular I2C *Air Quality communication protocol *Energy Management *Work Space Comfort * Event out pin for real time motion *Zonal Environmental Controls detection Four Core Sense Capability *Motion (PIR) * Space saving compact design * Multiple attach methods to *Light accommodate your application need *Temperature * One footprint allows multiple sensor *Humidity Optional Sense Capability *VOC *eCO2 *Sound (microphone) Specifications *Application Specification: 114-133092/114-133115 *Design Objectives / Specification: 108-133092 INDUSTRIAL /// AmbiMate SENSOR MODULE MS4 SERIES configurations & flexibility in design AmbiMate SENSOR MODULE MS4 SERIES Product Specifications 6 7 3 4 1 2 Item Sensor 1 2 Temperature Relative Humidity 5 Sensor Performance 5C to +50C + 1C Accuracy, 1 second acquisition rate 5% to 95% RH, 3% accuracy, 1 second acquisition rate Absolute Maximum Ratings Symbol Min Storage Temperature Tstg -40 85 C Power Supply Input Voltage Vdd 3.1 3.5 VDC x 10* mA* Total System Current Draw Id Max Unit *w/ VOC/eCO2 with value 33mA 3 Motion Interrupt driven 4 Ambient Light Level 1 second acquisition rate 0-1024 Lux 5 Microphone Analog audio and interrupt driven option, response <0.5 seconds Electrical Characteristics Min Max Unit Analog Audio Output Sensitivity -25 -19 dBV Analog Audio Output Freq Range 100 10k Hz Environmental Characteristics Min Max Unit 6 VOC 0-1187ppb, 60 second acquisition rate Operating Temperature -5 50 C 7 eCO2 400-8192ppm, 60 second acquisition rate, (an equivalent eCO2 measurement based on total VOC concentrations) Relative Humidity Operating, Non-Condensing Environment 5 95 % Electrical *3.3VDC input *I2C Output (max. 100 kBaud) *Interrupt driven event pin for motion detection *Design optimized for maximum battery life Pin Assignment I2C Signals Pin Signal 1 GND I/O Description I/O Common Connection 2 Event Out O Motion detection 3 SCL O Clock Signal for I2C bus *Mounting location: ceiling, wall, corner 4 SDA O Data signal for I2C bus *PIR requires use of Fresnel lens 5 Vdd I 3.3VDC Input Design Considerations *Enclosure must allow free air movement over sensors *Use of light pipe recommended to avoid shadowing Audio Signals Pin Signal I/O For enhanced motion detection, pleace contact TE. 1 Audio Output O Analog audio output signal Note: Refer to Application Spec 114-133092 or contact TE for additional design considerations when integrating with a host product. 2 GND O Common connection INDUSTRIAL /// AmbiMate SENSOR MODULE MS4 SERIES Description AmbiMate SENSOR MODULE MS4 SERIES Product Selection Information HOST PRODUCT ATTACH METHOD** Part Number AmbiMate Series Four Core 2316851-1 MS4 * 2316851-2 MS4 * 2316852-1 MS4 * * * 2316852-2 MS4 * * * 2314277-1 MS4 * 2314277-2 MS4 * 2314291-1 MS4 * * * 2314291-2 MS4 * * * 1-2314277-1 MS4 * 1-2314277-2 MS4 * 1-2314291-1 MS4 * * * 1-2314291-2 MS4 * * * VOC Sound eCO2 Castellation Vertical w/Header* Plated Thru Hole * * *Temperature * *Humidity * Optional Sense Capability * * * *Motion (PIR) *Light * * Four Core Sense Capability * *VOC * *eCO2 *Sound (microphone) * * * * * * * *.100" unshrouded high temp header for direct solder attach to .062" host PCB. **Other host product attach methods available (i.e. two piece separable or wire attach). Contact TE Sales or Product Management for options. Dimensions MS4 Series Castellation MS4 Series Header and Plated Thru Hole 29.46mm 32mm 2.54mm 5X 16mm 16mm 2.54mm 5X 1.27mm 2X te.com (c) 2018 TE Connectivity. All Rights Reserved. TE, TE Connectivity, and the TE connectivity (logo) are trademarks of the TE Connectivity. Other logos, product and Company names mentioned herein may be trademarks of their respective owners. While TE has made every reasonable effort to ensure the accuracy of the information in this brochure, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this catalog are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. 1-1773935-7 ML 08/2019 INDUSTRIAL /// AmbiMate SENSOR MODULE MS4 SERIES USA: +1 (800) 522-6752 Canada: +1 (905) 475-6222 Mexico: +52 (0) 55-1106-0800 Latin/S. America: +54 (0) 11-4733-2200 Germany: +49 (0) 6251-133-1999 UK: +44 (0) 800-267666 France: +33 (0) 1-3420-8686 The Netherlands: +31 (0) 73-6246-999 China: +86 (0) 400-820-6015