BCcomponents DATA SHEET MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors Product specification Supersedes data of April 1999 File under BCcomponents, BC05 2001 Jun 22 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors MKT RADIAL EPOXY LACQUERED TYPE PITCH 10/15/22.5/27.5 mm PITCH 7.5 (bent back leads) 296x12(full_width) 467 (10 mm) 469 (10 mm) 468 (7.5/15 - 22.5 -27.5 mm) CBA819 Fig.1 Simplified outlines. FEATURES * Low-inductive wound cell of metallized (PETP) film * Cell protected by epoxy lacquer * Radial leads of solder-coated wire * Withstands solvents and rinsing liquids APPLICATIONS * Blocking and coupling * Bypass and energy reservoir. QUICK REFERENCE DATA DESCRIPTION 0.01 to 10 F Capacitance tolerance 10%; 5% Rated (DC) voltage 100 V; 250 V; 400 V; 630 V; 1000 V Rated (AC) voltage 63 V; 160 V; 200 V; 250 V; 400 V Climatic category 55/105/56 Rated temperature 85 C Maximum application temperature 105 C Reference specifications IEC 60384-2 Performance grade grade 1 (long life) Materials qualified in accordance with UL94 V-0 DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-02/102". 2001 Jun 22 VALUE Capacitance range (E12 series) 2 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 467 468 469 MULTIPLIER (nF) 10.0 mm 15/7.5 mm 15.0 mm 22.5 mm 27.5 mm 10.0 mm CAPACITANCE (numerically) 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 2222 TYPE MKT 467 46. XX PACKAGING LEAD CONFIGURATION loose in box lead length 3.5 mm loose in box lead length 3.5 mm taped on reel bent back leads MKT 468 MKT/MKT 468 loose in box lead length 3.5 mm XX X PREFERRED TYPES C-TOL 100 V 250 V 400 V 630 V 1000 V 10% 5% 10% 5% 10% 5% 10% 04 05 04 05 61 62 - 16 17 16 17 63 64 - 28 29 28 29 65 66 - 40 41 40 41 67 68 - 60 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 10% 5% 51 52 06 07 51 52 06 07 25 26 21 22 28 29 57 58 42 43 57 58 42 43 65 66 61 62 68 69 - ON REQUEST loose in box lead length 19.0 mm MKT 467 taped on reel loose in box long leads MKT 468 taped on reel lead length 4.0 mm loose in box MKT 469 lead length 22.0 mm taped on reel 2001 Jun 22 3 53 54 18 19 53 54 18 19 45 46 41 42 48 49 55 56 30 31 55 56 30 31 55 56 51 52 58 59 BCcomponents Product specification Metallized polyester film capacitors MKT 467 MKT 467 GENERAL DATA PITCH 10 mm (kinked leads) b l 296x12(full_width) seating plane (1) h (2) lt Odt A P CBA100 Dimensions in mm. (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. (3) A = 2.0 0.5 mm. Fig.3 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 120 x 10-4 200 x 10-4 0.1 F < C 0.47 F 75 x 10-4 120 x 10-4 225 x 10-4 0.47 F < C 1.0 F 10-4 10-4 75 x 120 x - 30 V/s Rated voltage pulse slope (dU/dt)R at 100 V (DC) RC between leads, for C > 0.33 F at 100 V; 1 minute >5000 s >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute Withstanding (DC) voltage between leads and case 200 V; 1 minute Available 100 V DC versions PACKAGING DIMENSIONS lt = 3.5 0.5 mm Loose in box lt = 19.0 4.0 mm Taped on reel 2001 Jun 22 H = 16.0 mm; P0 = 12.7 mm 4 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 467 04... preferred 5% 2222 467 05... preferred 10% 2222 467 51... on request 5% 2222 467 52... on request 10% 2222 467 06... on request 5% 2222 467 07... on request BCcomponents Product specification Metallized polyester film capacitors MKT 467 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x h max x lmax (mm) LOOSE IN BOX MASS (g) lt = 3.5 0.5 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits 0.056 2222 467 04563 .. 05563 0.068 2222 467 04683 .. 05683 2222 467 04823 .. 05823 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 4.0 x 13.0 x 12.5 0.4 0.12 4.3 x 13.3 x 12.5 0.5 0.15 4.0 x 13.0 x 12.5 0.4 2222 467 04154 .. 05154 0.18 4.2 x 13.2 x 12.5 0.4 2222 467 04184 .. 05184 0.22 4.5 x 13.6 x 12.5 0.5 2222 467 04224 .. 05224 0.27 4.2 x 13.2 x 12.5 0.4 2222 467 04274 .. 05274 0.33 4.6 x 13.6 x 12.5 0.5 2222 467 04334 .. 05334 0.39 4.0 x 13.0 x 12.5 0.4 2222 467 04394 .. 05394 0.47 4.2 x 13.2 x 12.5 0.4 2222 467 04474 .. 05474 0.56 4.6 x 13.6 x 12.5 0.5 2222 467 04564 .. 05564 0.68 5.0 x 14.0 x 12.5 0.5 2222 467 04684 .. 05684 0.82 5.5 x 14.5 x 12.5 0.6 2222 467 04824 .. 05824 1.0 6.0 x 15.0 x 12.5 0.6 2222 467 04105 .. 05105 0.082 0.1 2001 Jun 22 5 2222 467 04104 .. 05104 2222 467 04124 .. 05124 BCcomponents Product specification Metallized polyester film capacitors MKT 467 MKT 467 GENERAL DATA PITCH 10 mm (kinked leads) b l 296x12(full_width) seating plane (1) h (2) lt Odt A P CBA100 Dimensions in mm. (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. (3) A = 2.0 0.5 mm. Fig.4 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 120 x 10-4 220 x 10-4 0.1 F < C 0.22 F 75 x 10-4 120 x 10-4 225 x 10-4 120 V/s Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute >30000 M >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute Withstanding (DC) voltage between leads and case 500 V; 1 minute Available 250 V DC versions PACKAGING DIMENSIONS lt = 3.5 0.5 mm Loose in box lt = 19.0 4.0 mm Taped on reel 2001 Jun 22 H = 16.0 mm; P0 = 12.7 mm 6 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 467 16... preferred 5% 2222 467 17... preferred 10% 2222 467 53... on request 5% 2222 467 54... on request 10% 2222 467 18... on request 5% 2222 467 19... on request BCcomponents Product specification Metallized polyester film capacitors MKT 467 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 3.5 0.5 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits .. 17273 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.027 4.2 x 13.2 x 12.5 0.4 2222 467 16273 0.033 4.6 x 13.6 x 12.5 0.5 2222 467 16333 .. 17333 0.039 4.0 x 13.0 x 12.5 0.4 2222 467 16393 .. 17393 0.047 4.1 x 13.1 x 12.5 0.4 2222 467 16473 .. 17473 0.056 4.0 x 13.0 x 12.5 0.4 2222 467 16563 .. 17563 0.068 4.1 x 13.1 x 12.5 0.4 2222 467 16683 .. 17683 0.082 4.4 x 13.4 x 12.5 0.5 2222 467 16823 .. 17823 0.1 4.0 x 13.0 x 12.5 0.4 2222 467 16104 .. 17104 0.12 4.3 x 13.3 x 12.5 0.5 2222 467 16124 .. 17124 0.15 4.8 x 13.8 x 12.5 0.5 2222 467 16154 .. 17154 0.18 5.2 x 14.2 x 12.5 0.5 2222 467 16184 .. 17184 0.22 5.8 x 14.8 x 12.5 0.6 2222 467 16224 .. 17224 2001 Jun 22 7 BCcomponents Product specification Metallized polyester film capacitors MKT 467 MKT 467 GENERAL DATA PITCH 10 mm (kinked leads) b l 296x12(full_width) seating plane (1) h (2) lt Odt A P CBA100 Dimensions in mm. (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. (3) A = 2.0 0.5 mm. Fig.5 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.1 F at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 120 x 10-4 200 x 10-4 170 V/s Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute >30000 M >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute Withstanding (DC) voltage between leads and case 800 V; 1 minute Available 400 V DC versions PACKAGING DIMENSIONS lt = 3.5 0.5 mm Loose in box lt = 19.0 4.0 mm Taped on reel 2001 Jun 22 H = 16.0 mm; P0 = 12.7 mm 8 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 467 28... preferred 5% 2222 467 29... preferred 10% 2222 467 55... on request 5% 2222 467 56... on request 10% 2222 467 30... on request 5% 2222 467 31... on request BCcomponents Product specification Metallized polyester film capacitors MKT 467 URdc = 400 V; URac = 200 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 3.5 0.5 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits 0.001 2222 467 28102 .. 29102 0.0012 2222 467 28122 .. 29122 2222 467 28152 .. 29152 2222 467 28182 .. 29182 Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.0015 4.5 x 13.5 x 12.5 0.5 0.0018 0.0022 4.0 x 13.0 x 12.5 0.4 2222 467 28222 .. 29222 .. 29272 0.0027 4.3 x 13.3 x 12.5 0.5 2222 467 28272 0.0033 4.6 x 13.6 x 12.5 0.5 2222 467 28332 .. 29332 0.0039 4.0 x 13.0 x 12.5 0.4 2222 467 28392 .. 29392 0.0047 4.1 x 13.2 x 12.5 0.4 2222 467 28472 .. 29472 0.0056 4.6 x 13.6 x 12.5 0.5 2222 467 28562 .. 29562 0.0068 4.2 x 13.2 x 12.5 0.4 2222 467 28682 .. 29682 0.0082 4.6 x 13.6 x 12.5 0.5 2222 467 28822 .. 29822 0.01 4.1 x 13.1 x 12.5 0.4 2222 467 28103 .. 29103 .. 29123 0.012 4.5 x 13.5 x 12.5 0.5 2222 467 28123 0.015 4.1 x 13.1 x 12.5 0.4 2222 467 28153 .. 29153 0.018 4.5 x 13.5 x 12.5 0.5 2222 467 28183 .. 29183 0.022 4.0 x 13.0 x 12.5 0.4 2222 467 28223 .. 29223 0.027 4.2 x 13.2 x 12.5 0.4 2222 467 28273 .. 29273 0.033 4.6 x 13.7 x 12.5 0.5 2222 467 28333 .. 29333 0.039 5.0 x 13.9 x 12.5 0.5 2222 467 28393 .. 29393 0.047 4.1 x 13.1 x 12.5 0.4 2222 467 28473 .. 29473 .. 29563 0.056 4.4 x 13.4 x 12.5 0.5 2222 467 28563 0.068 4.8 x 13.8 x 12.5 0.5 2222 467 28683 .. 29683 0.082 5.4 x 14.3 x 12.5 0.6 2222 467 28823 .. 29823 0.1 5.7 x 14.7 x 12.5 0.6 2222 467 28104 .. 29104 2001 Jun 22 9 BCcomponents Product specification Metallized polyester film capacitors MKT 467 MKT 467 GENERAL DATA PITCH 10 mm (kinked leads) b l 296x12(full_width) seating plane (1) h (2) lt Odt A P CBA100 Dimensions in mm. (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. (3) A = 2.0 0.5 mm. Fig.6 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.033 F at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 120 x 10-4 200 x 10-4 120 V/s Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads, for C 0.33 F at 500 V; 1 minute >30000 M >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute Withstanding (DC) voltage between leads and case 1260 V; 1 minute Available 630 V DC versions PACKAGING DIMENSIONS lt = 3.5 0.5 mm Loose in box lt = 19.0 4.0 mm Taped on reel 2001 Jun 22 H = 16.0 mm; P0 = 12.7 mm 10 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 467 40... preferred 5% 2222 467 41... preferred 10% 2222 467 57... on request 5% 2222 467 58... on request 10% 2222 467 42... on request 5% 2222 467 43... on request BCcomponents Product specification Metallized polyester film capacitors MKT 467 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 3.5 0.5 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.01 4.1 x 13.1 x 12.5 0.4 2222 467 40103 .. 41103 0.012 4.5 x 13.5 x 12.5 0.5 2222 467 40123 .. 41123 0.015 4.9 x 13.9 x 12.5 0.5 2222 467 40153 .. 41153 0.018 5.4 x 14.4 x 12.5 0.6 2222 467 40183 .. 41183 0.022 4.8 x 13.8 x 12.5 0.5 2222 467 40223 .. 41223 0.027 5.3 x 14.3 x 12.5 0.6 2222 467 40273 .. 41273 0.033 5.9 x 14.9 x 12.5 0.6 2222 467 40333 .. 41333 2001 Jun 22 11 BCcomponents Product specification Metallized polyester film capacitors MKT 468 MKT 468 GENERAL DATA PITCH 15/22.5 mm PITCH 7.5 mm (bent back leads) l 296x12(full_width) l b seating plane (1) b h h' F' (2) (3) F lt H Odt 10 A P CBA818 Odt 15 Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. (4) A = 2.5 +1.4/-0.5 mm. Fig.7 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C 10.0 F Rated voltage pulse slope (dU/dt)R at 100 V (DC): lmax = 17.5 mm lmax = 26.0 mm RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case VALUE at 1 kHz 75 x 10-4 at 10 kHz 120 x 10-4 20 V/s 10 V/s >5000 s >30000 M 160 V; 1 minute 200 V; 1 minute Available 100 V DC versions PACKAGING DIMENSIONS C-tol 10% 5% 10% 5% 10% 5% 10% 5% lt = 3.5 0.5 mm Loose in box long leads; note 1 Taped on reel H = 16.0 mm; P0 = 12.7 mm Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm Note 1. Length of long leads: a) lt = 19.0 4.0 mm for lead pitch = 15.0 mm. b) lt = 25.0 4.0 mm for lead pitch = 22.5 mm. 2001 Jun 22 12 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 04... 2222 468 05... 2222 468 51... 2222 468 52... 2222 468 06... 2222 468 07... 2222 468 61... 2222 468 62... ORDERING preferred preferred on request on request on request on request preferred preferred BCcomponents Product specification Metallized polyester film capacitors MKT 468 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm short leads H = 16.0 mm; P0 = 15.0 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm C-tol = 10% C-tol = 5% last 5 digits pitch = 7.5 mm (bent back) 1.2 5.5 x 14.5 (16.0) x 17.5 0.7 2222 468 04125 .. 05125 .. 61125 .. 62125 1.5 6.0 x 15.0 (16.5) x 17.5 0.9 2222 468 04155 .. 05155 .. 61155 .. 62155 1.8 6.5 x 15.5 (17.0) x 17.5 1.0 2222 468 04185 .. 05185 .. 61185 .. 62185 2.2 7.0 x 16.0 (17.5) x 17.5 1.2 2222 468 04225 .. 05225 .. 61225 .. 62225 2.7 8.0 x 17.0 (18.5) x 17.5 1.4 2222 468 04275 .. 05275 .. 61275 .. 62275 3.3 8.5 x 17.5 (19.0) x 17.5 1.5 2222 468 04335 .. 05335 .. 61335 .. 62335 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm pitch = 7.5 mm (bent back) 3.9 6.5 x 18.5 x 26.0 2.8 2222 468 04395 .. 05395 4.7 7.0 x 19.5 x 26.0 3.2 2222 468 04475 .. 05475 5.6 7.5 x 20.0 x 26.0 3.5 2222 468 04565 .. 05565 6.8 8.5 x 21.5 x 26.0 4.1 2222 468 04685 .. 05685 8.2 9.5 x 22.5 x 26.0 4.8 2222 468 04825 .. 05825 10.0 10.5 x 23.5 x 26.0 5.5 2222 468 04106 .. 05106 Note 1. Dimensions in brackets for bent back leads. 2001 Jun 22 13 not available BCcomponents Product specification Metallized polyester film capacitors MKT 468 MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads) l 296x12(full_width) l b seating plane (1) h b h' F' (2) (3) F lt H Odt 10 A P CBA818 Odt 15 Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. (4) A = 2.5 +1.4/-0.5 mm. Fig.8 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.47 F C > 0.47 F Rated voltage pulse slope (dU/dt)R at 250 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 VALUE at 10 kHz 120 x 10-4 120 x 10-4 at 100 kHz 225 x 10-4 - 45 V/s 20 V/s 15 V/s >30000 M >10000 s >30000 M 400 V; 1 minute 500 V; 1 minute Available 250 V DC versions PACKAGING(1) DIMENSIONS C-tol 10% 5% 10% 5% 10% 5% 10% 5% lt = 3.5 0.5 mm Loose in box long leads; note 2 Taped on reel H = 16.0 mm; P0 = 12.7 mm Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm Notes 1. Taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 19.0 4.0 mm for lead pitch = 15.0 mm. b) lt = 25.0 4.0 mm for lead pitch = 22.5 mm. c) lt = 24.0 4.0 mm for lead pitch = 27.5 mm. 2001 Jun 22 14 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 16... 2222 468 17... 2222 468 53... 2222 468 54... 2222 468 18... 2222 468 19... 2222 468 63... 2222 468 64... ORDERING preferred preferred on request on request on request on request preferred preferred BCcomponents Product specification Metallized polyester film capacitors MKT 468 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm short leads H = 16.0 mm; P0 = 15.0 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm C-tol = 10% C-tol = 5% last 5 digits pitch = 7.5 mm (bent back) 0.27 5.0 x 14.0 (15.5) x 17.5 0.6 2222 468 16274 .. 17274 .. 63274 .. 64274 0.33 5.5 x 14.5 (16.0) x 17.5 0.7 2222 468 16334 .. 17334 .. 63334 .. 64334 0.39 6.0 x 15.0 (16.5) x 17.5 0.9 2222 468 16394 .. 17394 .. 63394 .. 64394 0.47 6.5 x 15.5 (17.0) x 17.5 1.0 2222 468 16474 .. 17474 .. 63474 .. 64474 0.56 7.5 x 16.5 (18.0) x 17.5 1.3 2222 468 16564 .. 17564 .. 63564 .. 64564 0.68 8.0 x 17.0 (18.5) x 17.5 1.4 2222 468 16684 .. 17684 .. 63684 .. 64684 0.82 8.5 x 17.5 (19.0) x 17.5 1.5 2222 468 16824 .. 17824 .. 63824 .. 64824 1.0 8.0 x 20.0 (21.5) x 17.5 1.7 2222 468 16105 .. 17105 .. 63105 .. 64105 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm pitch = 7.5 mm (bent back) 1.2 7.0 x 19.0 x 26.0 3.2 2222 468 16125 .. 17125 1.5 8.0 x 21.0 x 26.0 3.8 2222 468 16155 .. 17155 1.8 9.0 x 22.0 x 26.0 4.1 2222 468 16185 .. 17185 2.2 9.8 x 23.0 x 26.0 4.8 2222 468 16225 .. 17225 2.7 11.0 x 24.0 x 26.0 5.9 2222 468 16275 .. 17275 3.3 12.5 x 25.5 x 26.0 6.9 2222 468 16335 .. 17335 3.9 13.5 x 26.5 x 26.0 7.5 2222 468 16395 .. 17395 4.7 14.9 x 28.0 x 26.0 8.6 2222 468 16475 .. 17475 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 5.6 15.0 x 28.0 x 30.0 9.1 pitch = 7.5 mm (bent back) 2222 468 16565 Note 1. Dimensions in brackets for bent back leads. 2001 Jun 22 not available 15 .. 17565 not available BCcomponents Product specification Metallized polyester film capacitors MKT 468 MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads) l 296x12(full_width) l b seating plane (1) h h' F' (2) (3) F lt A H Odt 10 P b CBA818 Odt 15 Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. (4) A = 2.5 +1.4/-0.5 mm. Fig.9 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.47 F C > 0.47 F Rated voltage pulse slope (dU/dt)R at 400 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 VALUE at 10 kHz 120 x 10-4 120 x 10-4 at 100 kHz 225 x 10-4 - 65 V/s 30 V/s 25 V/s >30000 M >10000 s >30000 M 640 V; 1 minute 800 V; 1 minute Available 400 V DC versions PACKAGING(1) Loose in box DIMENSIONS C-tol 10% 5% 10% 5% 10% 5% 10% 5% lt = 3.5 0.5 mm long leads; note 2 Taped on reel H = 16.0 mm; P0 = 12.7 mm Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm Notes 1. Taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 19.0 4.0 mm for lead pitch = 15.0 mm. b) lt = 25.0 4.0 mm for lead pitch = 22.5 mm. c) lt = 24.0 4.0 mm for lead pitch = 27.5 mm. 2001 Jun 22 16 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 28... 2222 468 29... 2222 468 55... 2222 468 56... 2222 468 30... 2222 468 31... 2222 468 65... 2222 468 66... ORDERING preferred preferred on request on request on request on request preferred preferred BCcomponents Product specification Metallized polyester film capacitors MKT 468 URdc = 400 V; URac = 200 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm short leads H = 16.0 mm; P0 = 15.0 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm C-tol = 10% C-tol = 5% last 5 digits pitch = 7.5 mm (bent back) 0.12 5.0 x 14.0 (15.5) x 17.5 0.6 2222 468 28124 .. 29124 .. 65124 .. 66124 0.15 5.8 x 15.0 (16.5) x 17.5 0.9 2222 468 28154 .. 29154 .. 65154 .. 66154 0.18 6.5 x 15.5 (17.0) x 17.5 1.0 2222 468 28184 .. 29184 .. 65184 .. 66184 0.22 7.0 x 15.5 (17.5) x 17.5 1.2 2222 468 28224 .. 29224 .. 65224 .. 66224 0.27 7.4 x 16.5 (18.0) x 17.5 1.3 2222 468 28274 .. 29274 .. 65274 .. 66274 0.33 8.5 x 17.5 (19.0) x 17.5 1.5 2222 468 28334 .. 29334 .. 65334 .. 66334 0.39 7.4 x 19.5 (21.0) x 17.5 1.3 2222 468 28394 .. 29394 .. 65394 .. 66394 0.47 8.4 x 20.5 (22.0) x 17.5 1.5 2222 468 28474 .. 29474 .. 65474 .. 66474 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm pitch = 7.5 mm (bent back) 0.56 7.5 x 19.5 x 26.0 3.2 2222 468 28564 .. 29564 0.68 8.0 x 21.0 x 26.0 3.8 2222 468 28684 .. 29684 0.82 9.0 x 22.0 x 26.0 4.5 2222 468 28824 .. 29824 1.0 9.9 x 23.0 x 26.0 5.2 2222 468 28105 .. 29105 1.2 11.0 x 24.0 x 26.0 5.9 2222 468 28125 .. 29125 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm pitch = 7.5 mm (bent back) 1.5 11.5 x 24.5 x 30.0 6.5 2222 468 28155 .. 29155 1.8 12.5 x 25.5 x 30.0 7.1 2222 468 28185 .. 29185 2.2 14.0 x 27.0 x 30.0 8.2 2222 468 28225 .. 29225 Note 1. Dimensions in brackets for bent back leads. 2001 Jun 22 not available 17 not available BCcomponents Product specification Metallized polyester film capacitors MKT 468 MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads) l 296x12(full_width) l b seating plane (1) h h' F' (2) (3) F lt A H Odt 10 P b CBA818 Odt 15 Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) F - F' < 0.3 mm. F = 7.5 +0.6/-0.1 mm. (4) A = 2.5 +1.4/-0.5 mm. Fig.10 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C 0.1 Fp 0.1 F < C 0.47 F C > 0.47 F Rated voltage pulse slope (dU/dt)R at 630 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C 0.33 F at 500 V; 1 minute RC between leads, for C > 0.33 F at 500 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case at 1 kHz 75 x 10-4 75 x 10-4 75 x 10-4 VALUE at 10 kHz 120 x 10-4 120 x 10-4 120 x 10-4 at 100 kHz 200 x 10-4 225 x 10-4 - 90 V/s 35 V/s 30 V/s >30000 M >10000 s >30000 M 1008 V; 1 minute 1260 V; 1 minute Available 630 V DC versions PACKAGING(1) Loose in box DIMENSIONS C-tol 10% 5% 10% 5% 10% 5% 10% 5% lt = 3.5 0.5 mm long leads; note 2 Taped on reel H = 16.0 mm; P0 = 12.7 mm Taped on reel (bent back) H = 16.0 mm; P0 = 15.0 mm Notes 1. Taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: a) lt = 19.0 4.0 mm for lead pitch = 15.0 mm. b) lt = 25.0 4.0 mm for lead pitch = 22.5 mm. c) lt = 24.0 4.0 mm for lead pitch = 27.5 mm. 2001 Jun 22 18 FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 40... 2222 468 41... 2222 468 57... 2222 468 58... 2222 468 42... 2222 468 43... 2222 468 67... 2222 468 68... ORDERING preferred preferred on request on request on request on request preferred preferred BCcomponents Product specification Metallized polyester film capacitors MKT 468 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x h (h')max x lmax (mm) MASS (g) LOOSE IN BOX REEL DIAMETER = 500 mm short leads H = 16.0 mm; P0 = 15.0 mm C-tol = 10% C-tol = 5% catalogue number last 5 digits Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm C-tol = 10% C-tol = 5% last 5 digits pitch = 7.5 mm (bent back) 0.039 5.0 x 14.0 (15.5) x 17.5 0.6 2222 468 40393 .. 41393 .. 67393 .. 68393 0.047 5.5 x 14.5 (16.0) x 17.5 0.7 2222 468 40473 .. 41473 .. 67473 .. 68473 0.056 5.9 x 15.0 (16.5) x 17.5 0.9 2222 468 40563 .. 41563 .. 67563 .. 68563 0.068 6.5 x 16.0 (17.5) x 17.5 1.2 2222 468 40683 .. 41683 .. 67683 .. 68683 0.082 7.3 x 16.5 (18.0) x 17.5 1.3 2222 468 40823 .. 41823 .. 67823 .. 68823 0.1 7.9 x 17.0 (18.5) x 17.5 1.4 2222 468 40104 .. 41104 .. 67104 .. 68104 0.12 7.5 x 19.5 (21.0) x 17.5 1.3 2222 468 40124 .. 41124 .. 67124 .. 68124 0.15 8.5 x 20.5 (22.0) x 17.5 1.5 2222 468 40154 .. 41154 .. 67154 .. 68154 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm pitch = 7.5 mm (bent back) 0.18 7.5 x 19.5 x 26.0 3.5 2222 468 40184 .. 41184 0.22 8.0 x 21.0 x 26.0 3.8 2222 468 40224 .. 41224 0.27 9.0 x 22.0 x 26.0 4.5 2222 468 40274 .. 41274 0.33 10.0 x 23.0 x 26.0 5.2 2222 468 40334 .. 41334 0.39 11.5 x 24.0 x 26.0 5.9 2222 468 40394 .. 41394 0.47 12.5 x 25.5 x 26.0 6.9 2222 468 40474 .. 41474 0.56 13.5 x 26.6 x 26.0 7.5 2222 468 40564 .. 41564 0.68 15.0 x 28.0 x 26.0 8.6 2222 468 40684 .. 41684 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.82 15.0 x 28.0 x 30.0 8.8 pitch = 7.5 mm (bent back) 2222 468 40824 Note 1. Dimensions in brackets for bent back leads. 2001 Jun 22 not available 19 .. 41824 not available BCcomponents Product specification Metallized polyester film capacitors MKT/MKT 468 MKT/MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm b l 296x12(full_width) h seating plane (1) (2) lt P CBA266 Odt A Dimensions in mm. (1) Hole 1.3 for dt = 0.8 mm. (2) 0 < 50. (3) A = 2.5 +1.4/-0.5 mm. Fig.11 Outline. Specific reference data for the 1000 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 120 x 10-4 200 x 10-4 0.1 F < C 0.22 F 75 x 10-4 120 x 10-4 225 x 10-4 Rated voltage pulse slope (dU/dt)R at 1000 V (DC) P = 15 mm 200 V/ms P = 22.5 mm 120 V/ms P = 27.5 mm 100 V/ms R between leads, for C 0.33 F at 500 V; 1 minute >30000 M >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case 1600; 1 minute 2000 V; 1 minute Available 1000 V DC versions PACKAGING Loose in box 2001 Jun 22 DIMENSIONS lt = 3.5 0.5 mm 20 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 468 60... preferred BCcomponents Product specification Metallized polyester film capacitors MKT/MKT 468 URdc = 1000 V; URac = 400 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 3.5 0.5 mm C-tol = 10% Pitch = 15.0 0.4 mm; dt = 0.80 0.08 mm 0.015 6.0 x 15.0 x 17.5 0.6 2222 468 60153 0.018 6.5 x 15.5 x 17.5 0.7 2222 468 60183 0.022 7.2 x 16.2 x 17.5 0.9 2222 468 60223 0.027 8.0 x 17.0 x 17.5 1.0 2222 468 60273 0.033 8.8 x 17.8 x 17.5 1.4 2222 468 60333 0.039 9.6 x 18.6 x 17.5 1.5 2222 468 60393 0.047 10.6 x 19.6 x 17.5 1.8 2222 468 60473 2222 468 60563 Pitch = 22.5 0.4 mm; dt = 0.80 0.08 mm 0.056 7.0 x 20.0 x 26.0 3.2 0.068 8.0 x 21.0 x 26.0 3.8 2222 468 60683 0.082 8.5 x 21.5 x 26.0 4.1 2222 468 60823 0.1 9.5 x 22.5 x 26.0 4.8 2222 468 60104 0.12 10.5 x 23.5 x 26.0 5.5 2222 468 60124 Pitch = 27.5 0.4 mm; dt = 0.80 0.08 mm 0.15 10.5 x 23.5 x 30.0 5.8 2222 468 60154 0.18 11.5 x 24.5 x 30.0 6.5 2222 468 60184 0.22 13.0 x 26.0 x 30.0 7.5 2222 468 60224 2001 Jun 22 21 BCcomponents Product specification Metallized polyester film capacitors MKT 469 MKT 469 GENERAL DATA PITCH 10 mm (straight leads) l 296x12(full_width) b seating plane (1) h 1.5 lt O1.3 P Odt CBA072 Dimensions in mm. (1) Hole 1.0 for dt = 0.6 mm. Fig.12 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 120 x 10-4 200 x 10-4 0.1 F < C 0.47 F 75 x 10-4 120 x 10-4 225 x 10-4 0.47 F < C 1.0 F 10-4 10-4 75 x 120 x - 30 V/s Rated voltage pulse slope (dU/dt)R at 100 V (DC) RC between leads, for C > 0.33 F at 100 V; 1 minute >5000 s >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute Withstanding (DC) voltage between leads and case 200 V; 1 minute Available 100 V DC versions PACKAGING DIMENSIONS lt = 4.0+1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel 2001 Jun 22 H = 18.5 mm; P0 = 12.7 mm 22 C-tol FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 469 25... on request 5% 2222 469 26... on request 10% 2222 469 21... on request 5% 2222 469 22... on request 10% 2222 469 28... on request 5% 2222 469 29... on request BCcomponents Product specification Metallized polyester film capacitors MKT 469 URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x h max x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.056 2222 469 25563 0.068 2222 469 25683 0.082 4.0 x 9.3 x 12.5 0.4 2222 469 25823 0.1 2222 469 25104 0.12 4.3 x 9.7 x 12.5 0.5 2222 469 25124 0.15 3.9 x 9.2 x 12.5 0.4 2222 469 25154 0.18 4.2 x 9.5 x 12.5 0.4 2222 469 25184 0.22 4.5 x 9.9 x 12.5 0.5 2222 469 25224 0.27 4.2 x 9.5 x 12.5 0.4 2222 469 25274 0.33 4.6 x 9.9 x 12.5 0.5 2222 469 25334 0.39 4.0 x 9.3 x 12.5 0.4 2222 469 25394 0.47 4.2 x 9.5 x 12.5 0.4 2222 469 25474 0.56 4.6 x 9.9 x 12.5 0.5 2222 469 25564 0.68 5.0 x 10.3 x 12.5 0.5 2222 469 25684 0.82 5.5 x 10.8 x 12.5 0.6 2222 469 25824 1.0 6.0 x 11.3 x 12.5 0.6 2222 469 25105 2001 Jun 22 23 BCcomponents Product specification Metallized polyester film capacitors MKT 469 MKT 469 GENERAL DATA PITCH 10 mm (straight leads) l 296x12(full_width) b seating plane (1) h 1.5 lt O1.3 P Odt CBA072 Dimensions in mm. (1) Hole 1.0 for dt = 0.6 mm. Fig.13 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz C 0.1 F 75 x 10-4 120 x 10-4 220 x 10-4 0.1 F < C 0.22 F 75 x 10-4 120 x 10-4 225 x 10-4 120 V/s Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute >30000 M >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute Withstanding (DC) voltage between leads and case 500 V; 1 minute Available 250 V DC versions PACKAGING DIMENSIONS C-tol lt = 4.0+1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel 2001 Jun 22 H = 18.5 mm; P0 = 12.7 mm 24 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 469 45... on request 5% 2222 469 46... on request 10% 2222 469 41... on request 5% 2222 469 42... on request 10% 2222 469 48... on request 5% 2222 469 49... on request BCcomponents Product specification Metallized polyester film capacitors MKT 469 URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.027 4.2 x 9.5 x 12.5 0.4 2222 469 45273 0.033 4.6 x 9.9 x 12.5 0.5 2222 469 45333 0.039 4.0 x 9.3 x 12.5 0.4 2222 469 45393 0.047 4.1 x 9.4 x 12.5 0.4 2222 469 45473 0.056 4.0 x 9.3 x 12.5 0.4 2222 469 45563 0.068 4.1 x 9.4 x 12.5 0.4 2222 469 45683 0.082 4.4 x 9.7 x 12.5 0.5 2222 469 45823 0.1 4.0 x 9.3 x 12.5 0.4 2222 469 45104 0.12 4.3 x 9.7 x 12.5 0.5 2222 469 45124 0.15 4.8 x 10.1 x 12.5 0.5 2222 469 45154 0.18 5.2 x 10.5 x 12.5 0.5 2222 469 45184 0.22 5.8 x 11.1 x 12.5 0.6 2222 469 45224 2001 Jun 22 25 BCcomponents Product specification Metallized polyester film capacitors MKT 469 MKT 469 GENERAL DATA PITCH 10 mm (straight leads) l 296x12(full_width) b seating plane (1) h 1.5 lt O1.3 P Odt CBA072 Dimensions in mm. (1) Hole 1.0 for dt = 0.6 mm. Fig.14 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.1 F at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 120 x 10-4 200 x 10-4 170 V/s Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute >30000 M >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute Withstanding (DC) voltage between leads and case 800 V; 1 minute Available 400 V DC versions PACKAGING DIMENSIONS C-tol lt = 4.0+1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel 2001 Jun 22 H = 18.5 mm; P0 = 12.7 mm 26 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 469 55... on request 5% 2222 469 56... on request 10% 2222 469 51... on request 5% 2222 469 52... on request 10% 2222 469 58... on request 5% 2222 469 59... on request BCcomponents Product specification Metallized polyester film capacitors MKT 469 URdc = 400 V; URac = 200 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.001 2222 469 55102 0.0012 2222 469 55122 0.0015 4.5 x 9.9 x 12.5 0.5 2222 469 55152 0.0018 2222 469 55182 0.0022 4.0 x 9.3 x 12.5 0.4 2222 469 55222 0.0027 4.3 x 9.7 x 12.5 0.5 2222 469 55272 0.0033 4.6 x 9.9 x 12.5 0.5 2222 469 55332 0.0039 4.0 x 9.3 x 12.5 0.4 2222 469 55392 0.0047 4.1 x 9.5 x 12.5 0.4 2222 469 55472 0.0056 4.6 x 9.9 x 12.5 0.5 2222 469 55562 0.0068 4.2 x 9.5 x 12.5 0.4 2222 469 55682 0.0082 4.6 x 9.9 x 12.5 0.5 2222 469 55822 0.01 4.1 x 9.4 x 12.5 0.4 2222 469 55103 0.012 4.5 x 9.9 x 12.5 0.5 2222 469 55123 0.015 4.1 x 9.4 x 12.5 0.4 2222 469 55153 0.018 4.5 x 9.9 x 12.5 0.5 2222 469 55183 0.022 4.0 x 9.3 x 12.5 0.4 2222 469 55223 0.027 4.2 x 9.5 x 12.5 0.4 2222 469 55273 0.033 4.6 x 9.9 x 12.5 0.5 2222 469 55333 0.039 5.0 x 10.3 x 12.5 0.5 2222 469 55393 0.047 4.1 x 9.4 x 12.5 0.4 2222 469 55473 0.056 4.4 x 9.7 x 12.5 0.5 2222 469 55563 0.068 4.8 x 10.1 x 12.5 0.5 2222 469 55683 0.082 5.4 x 10.8 x 12.5 0.6 2222 469 55823 0.1 5.7 x 11.0 x 12.5 0.6 2222 469 55104 2001 Jun 22 27 BCcomponents Product specification Metallized polyester film capacitors MKT 469 MKT 469 GENERAL DATA PITCH 10 mm (straight leads) l 296x12(full_width) b seating plane (1) h 1.5 lt O1.3 P Odt CBA072 Dimensions in mm. (1) Hole 1.0 for dt = 0.6 mm. Fig.15 Outline. Specific reference data for the 630 V DC capacitors DESCRIPTION VALUE Tangent of loss angle: C 0.033 F at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 120 x 10-4 200 x 10-4 120 V/s Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads, for C 0.33 F at 500 V; 1 minute >30000 M >30000 M R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 minute Withstanding (DC) voltage between leads and case 1260 V; 1 minute Available 630 V DC versions PACKAGING DIMENSIONS C-tol lt = 4.0+1.0/-0.5 mm Loose in box lt = 22.0 4.0 mm Taped on reel 2001 Jun 22 H = 18.5 mm; P0 = 12.7 mm 28 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING 10% 2222 469 65... on request 5% 2222 469 66... on request 10% 2222 469 61... on request 5% 2222 469 62... on request 10% 2222 469 68... on request 5% 2222 469 69... on request BCcomponents Product specification Metallized polyester film capacitors MKT 469 URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) LOOSE IN BOX MASS (g) lt = 4.0 +1.0/-0.5 mm C-tol = 10% Pitch = 10.0 0.4 mm; dt = 0.60 0.06 mm 0.01 4.1 x 9.4 x 12.5 0.4 2222 469 65103 0.012 4.5 x 9.9 x 12.5 0.5 2222 469 65123 0.015 4.9 x 10.2 x 12.5 0.5 2222 469 65153 0.018 5.4 x 10.8 x 12.5 0.6 2222 469 65183 0.022 4.8 x 10.1 x 12.5 0.5 2222 469 65223 0.027 5.3 x 10.7 x 12.5 0.6 2222 469 65273 0.033 5.9 x 11.2 x 12.5 0.6 2222 469 65333 2001 Jun 22 29 BCcomponents Product specification Metallized polyester film capacitors MKT 467/468/469 MKT/MKT 468 CONSTRUCTION Mounting Description NORMAL USE * Low-inductive wound cell of metallized polyethylene terephthalate film The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". * Protected by a hard, water repellent, solvent resistant epoxy lacquer * Radial leads, solder coated. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK metallized polyester film In order to withstand vibration and shock tests, it must be ensured that the underside of the crimps are in good contact with the printed-circuit board: 144x12(halfpage) * For pitches 15 mm capacitors shall be mechanically fixed by the leads. * For larger pitches the capacitors shall be mounted in the same way and the body clamped. metal spray layer Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. connecting wire CBA073 RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Fig.16 Construction: MKT 100, 250, 400 and 630 V. 144x12(halfpage) Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. metallized polyester film For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. metal spray layer connecting wire CBA229 Fig.17 Construction: MKT/MKT 1000 V. 2001 Jun 22 30 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors CHARACTERISTICS Capacitance CBA074 296x12(full_width) 2 C/C (%) 1 0 -1 -2 -3 10 2 10 3 10 4 10 5 f (Hz) Fig.18 Capacitance change as a function of frequency: typical curve. CBA922 296x12(full_width) 6 C/C (%) 4 2 0 -2 max. 400V - 630V - 1000V 250V typical 100V -4 min. -6 -60 -20 20 60 Tamb (C) Fig.19 Capacitance as a function of ambient free air temperature, measured at 1 kHz, 1 V. 2001 Jun 22 31 100 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors Impedance CBA820 296x12(full_width) 10 3 MKT 467/468/469 Impedance () 10 2 400 V; 3 9 0nF 10 1 10 0 10 -1 10 -2 10 3 10 4 10 5 10 6 10 7 f (Hz) Fig.20 Impedance as a function of frequency: typical curve. Maximum DC and AC voltage as a function of temperature 1.2 296x12(full_width) factor CBB332 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 Tamb (C) Fig.21 Multiplying factor for DC and AC voltage as a function of temperature. 2001 Jun 22 32 100 BCcomponents Product specification Metallized polyester film capacitors MKT 467/468/469 MKT/MKT 468 Maximum RMS voltage and AC current (sinewave) as a function of frequency CBA809 296x12(full_width) 10 2 MKT 467/468/469 AC voltage (V) 10 1 1.0 F 2.2 F 10 F 10 0 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.22 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 100 V. CBA810 296x12(full_width) 10 2 MKT 467/468/469 AC voltage (V) 10 1 10 0 10 1 1.0 2.2 F 10 F F 10 2 10 3 10 4 f (Hz) 10 5 Fig.23 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 100 V. 2001 Jun 22 33 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors CBA811 296x12(full_width) 10 3 MKT 467/468/469 AC voltage (V) 10 2 10 1 220 nF 2.2 F 5.6 F 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.24 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 250 V. CBA812 296x12(full_width) 10 3 MKT 467/468/469 AC voltage (V) 10 2 10 1 22 0n F 2.2 5.6 F F 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 Fig.25 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 250 V. 2001 Jun 22 34 6 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors CBA813 296x12(full_width) 10 3 MKT 467/468/469 AC voltage (V) 10 2 10 1 100 nF 470 nF 2.2 F 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.26 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 400 V. CBA814 296x12(full_width) 10 3 MKT 467/468/469 AC voltage (V) 10 2 10 1 100 nF 10 0 10 1 470 nF 2.2 F 10 2 10 3 10 4 10 5 f (Hz) 10 Fig.27 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 400 V. 2001 Jun 22 35 6 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors CBA815 296x12(full_width) 10 3 MKT 467/468/469 AC voltage (V) 10 2 10 nF 100 nF 10 1 820 nF 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 6 Fig.28 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 630 V. CBA816 296x12(full_width) 10 3 MKT 467/468/469 AC voltage (V) 10 2 10 1 10 nF 100 nF 820 nF 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 Fig.29 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 630 V. 2001 Jun 22 36 6 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors CBA817 296x12(full_width) 10 3 MKT/MKT 468 AC voltage (V) 10 2 33 nF 100 nF 220 nF 10 1 10 0 10 1 10 2 10 3 10 4 10 5 10 6 f (Hz) Fig.30 AC voltage (RMS value) as a function of frequency at Tamb 85 C for URdc = 1000 V. CBA950 296x12(full_width) 10 3 MKT/MKT 468 AC voltage (V) 10 2 10 1 33 nF 100 nF 220 nF 10 0 10 1 10 2 10 3 10 4 10 5 f (Hz) 10 Fig.31 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 105 C for URdc = 1000 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 22 to 31. 2001 Jun 22 37 6 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors Tangent of loss angle CBA134 296x12(full_width) 10 3 dissipation factor (x 10-4) 5 4 3 2 1 10 2 C 0.33 F (curve 1) 0.33 F < C 1.2 F (curve 2) 1.2 F < C 3.9 F (curve 3) 3.9 F < C < 6.8 F (curve 4) C 6.8 F (curve 5) 10 1 10 2 10 3 10 4 10 5 f (Hz) Fig.32 Tangent of loss angle as a function of frequency: typical curve. Insulation resistance CBA088 296x12(full_width) 10 5 RC (s) 10 4 10 3 10 2 -60 -40 -20 0 20 40 60 80 Fig.33 RC product as a function of ambient free air temperature: typical curve. 2001 Jun 22 38 Tamb (C) 100 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) CBB191 16 296x12(full_width) T 14 (C) 12 10 8 6 4 2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (C) Fig.34 Maximum allowed component temperature rise as a function of the ambient temperature. 2001 Jun 22 39 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity bmax (mm) ORIGINAL PITCH (mm) 10 15 22.5 27.5 - 4.0 4.0 5.0 - 4.5 4.5 6.0 - - 5.0 5.0 6.0 12.0 13.0 5.5 6.0 6.5 13.0 15.0 6.0 6.0 6.5 13.0 15.0 6.5 6.5 8.0 15.0 17.0 7.0 - 8.0 15.0 17.0 7.5 - 9.0 17.0 18.0 8.0 - 9.0 17.0 20.0 8.5 - 11.0 18.0 20.0 9.0 - 11.0 18.0 22.0 9.5 - 12.0 20.0 22.0 10.0 - 12.0 20.0 23.0 10.5 - - 22.0 25.0 11.0 - - - 25.0 11.5 - - - 27.0 12.0 - - - 27.0 12.5 - - - 30.0 13.0 - - - 30.0 13.5 - - - 30.0 14.0 - - - 30.0 14.5 - - - 33.0 15.0 - - - 33.0 15.5 - - - 37.0 16.0 - - - 37.0 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter "Introduction", section "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 2001 Jun 22 40 BCcomponents Product specification Metallized polyester film capacitors Measuring the component temperature A thermocouple must be attached to the capacitor body as in Fig.35. 144x12(halfpage) thermocouple CBA771 Fig.35 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 2001 Jun 22 41 MKT 467/468/469 MKT/MKT 468 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors Application note and limiting conditions These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T 2 dU dU 2 x -------- x dt < U Rdc x -------- dt dt rated 0 T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 C. For higher temperatures a derating factor of 3% per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits in Fig.34. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1 "Heat conductivity". 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included): VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Maximum continuous RMS voltage Tamb 85 C 85 C < Tamb 105 C URac 0.8 x URac Maximum temporary RMS -overvoltage (<24 hours) 1.25 x URac 1.0 x URac Maximum peak voltage (Vo-p) (<2 s) 1.6 x URdc 1.3 x URdc 2001 Jun 22 42 BCcomponents Product specification Metallized polyester film capacitors MKT 467/468/469 MKT/MKT 468 Example C = 3300 nF - 100 V used for the voltage signal shown in Fig.36. Up-p = 80 V; Up = 70 V; T1 = 0.5 ms; T2 = 1 ms. The ambient temperature is 35 C. Checking the conditions: 1. The peak voltage Up = 70 V is lower than 100 V (DC). 2. The peak-to-peak voltage 80 V is lower than 2 x 2 x 63 V ( AC ) = 178 U p - p . 3. The voltage pulse slope dU/dt = 80 V/500 s = 0.16 V/ s. This is lower than 20 V/s (see specific reference data for each version). 4. The dissipated power is 60 mW as calculated with Fourier terms. 60 mW The temperature rise for bmax = 8.5 mm and pitch = 15 mm will be ------------------------------- = 5.5 C . 11 mW C This is lower than 15 C temperature rise at 35 C; see Fig.34. 5. Not applicable. 6. Not applicable. 296x12(full_width) voltage Up Up-p time T1 T2 CBA865 Fig.36 Voltage signal. 2001 Jun 22 43 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors MARKING Product marking STYLE MKT 467/468/469 Capacitors with original pitch = 10 mm 144x12(halfpage) 470n K 100 The capacitors are marked on the top or on the side (for typical example see Fig.37), with the following information: 1. Rated capacitance code in nF, F or in accordance with "IEC 60062" CBA109 2. Tolerance on rated capacitance: K = 10%; J = 5% Fig.37 Typical example of marking for a capacitor with original pitch = 10 mm. 3. Rated voltage (DC). Capacitors with original pitch = 15, 22.5 and 27.5 mm The capacitors are marked on the top or on the side (for typical examples see Fig.38), with the following information: 1. Manufacturer's symbol 144x12(halfpage) 2. Rated capacitance code in nF, F or in accordance with "IEC 60062" BC 820n J 100 3. Tolerance on rated capacitance: K = 10%; J = 5% 4. Rated voltage (DC). CBB299 Fig.38 Typical example of marking for a capacitor with original pitch = 15, 22.5 and 27.5 mm. STYLE MKT/MKT 468 The capacitors are marked on the top or on the side (for typical example see Fig.39) with the following information: 1. Manufacturer's symbol. 2. Rated capacitance code in nF, F or in accordance with "IEC 60062" 144x12(halfpage) J 1000 BC 180n MKT/MKT468 6 3. Tolerance on rated capacitance: K = 10%; J = 5% 4. Rated voltage (DC) CBB075 5. Code for dielectric material and construction (MKT/MKT). Fig.39 Typical example of marking. 2001 Jun 22 44 BCcomponents Product specification MKT 467/468/469 MKT/MKT 468 Metallized polyester film capacitors Package marking The package containing the capacitors is marked as shown in Fig.40. Barcode label marking LINE MARKING EXPLANATION 1 Manufacturer's name 2 Country of origin 3 Sub-family 4 Type description 5 Capacitance value, tolerance, voltage and climatic category ("IEC 60068-1") 6 Batchnumber (only for capacitors from PRC) 7 * Country of origin: Belgium Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO * Country of origin: China Preference origin code: N Country of origin in code: 260 (PRC) Responsible production centre: 07 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) Fig.40 Barcode label. 2001 Jun 22 45 BCcomponents Product specification Metallized polyester film capacitors MKT 467/468/469 MKT/MKT 468 QUICK REFERENCE TEST REQUIREMENTS TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile: "IEC 60068-2-21" load 10 N; 10 s Bending: "IEC 60068-2-21" load 5 N; 4 x 90 Resistance to soldering heat "IEC 60068-2-20" solder bath: 260 C; 10 s Resistance to solvents isopropyl alcohol; 23 C; 5 minutes no visible damage legible marking C/C 2% tan 30 x 10-4; note 1 Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours m/s2; half sinewave; 490 11 ms C/C 3% tan 30 x 10-4; note 1 Climatic sequence Dry heat: "IEC 60068-2-2" 16 hours; 105 C Damp heat cyclic, test Db, first cycle: "IEC 60068-2-30" Cold: "IEC 60068-2-1" C/C 5% tan 50 x 10-4; note 1 2 hours; -55 C Rins 50% of specified value Damp heat cyclic, test Db, remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat, steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH C/C 5% Endurance (DC): "IEC 60384-2" 2000 hours: 1.25 x URdc; 85 C 1 x URdc; 105 C C/C 5% Heat storage: "IEC 60384-2" 2000 hours; 105 C C/C 3% Resistance to soldering heat with preheating: "IEC 60384-2" body temperature: 100 C; bath temperature: 260 C; dwell time: 10 s tan 50 x 10-4; note 1 Rins 50% of specified value Rins 50% of specified value tan 30 x 10-4; note 1 Note 1. Measuring frequency 10 kHz. 2001 Jun 22 tan 30 x 10-4; note 1 46 C/C 2% tan 30 x 10-4; note 1