DATA SH EET
Product specification
Supersedes data of April 1999
File under BCcomponents, BC05
2001 Jun 22
BCcomponents
MKT 467/468/469
MKT/MKT 468
Metallized polyester film capacitors
2001 Jun 22 2
BCcomponents Product specification
Metallized polyester film capacitors MKT 467/46 8/469
MKT/MKT 468
MKT RADIAL EPOXY LACQUERED TYPE PITCH 10/15/22.5/27.5 mm
PITCH 7.5 (bent back leads)
296x12(full_width)
467
(10 mm) 468
(7.5/15 - 22.5 -27.5 mm) CBA819
469
(10 mm)
Fig.1 Simplified outlines.
FEATURES
•Low-inductive wound cel l of
metallized (PETP) film
•Cell protected by epoxy lacque r
•Radial leads of sold er-coate d wire
•Withstands solvents and rinsing
liquids
APPLICATIONS
•Blocking and coupling
•Bypass and energy reservoir.
DETAIL SPECIFICATION
For more detailed data and test
requirements see “Type detail
specification HQN-384-02/102”.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E 12 ser ies) 0.01 to 10 µF
Capacitance tol erance ±10%; ±5%
Rated (DC) voltage 100 V; 250 V; 400 V; 630 V; 1000 V
Rated (AC) voltage 63 V; 160 V; 200 V; 250 V; 400 V
Climatic category 55/105/56
Rated temperature 85 °C
Maximum applic ation temperatu re 105 °C
Reference specifications IEC 60384-2
Perf orm ance grade grade 1 (long life)
Materials qualified in accordanc e with UL94 V-0
2001 Jun 22 3
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
COMPOSITI ON OF CATALOGUE NUMBER
TYPE PACKAGING LEAD CONFIGURATION PREFERRED TYPES
C-TOL 100 V 250 V 400 V 630 V 1000 V
MKT 467 loose in box lead length 3.5 mm ±10% 04 16 28 40 -
±5% 05 17 29 41 -
MKT 468 loose in box lead length 3.5 mm ±10% 04 16 28 40 -
±5% 05 17 29 41 -
taped on reel bent back leads ±10% 61 63 65 67 -
±5% 62 64 66 68 -
MKT/MKT 468 loose in box lead length 3.5 mm ±10% - - - - 60
ON REQUEST
MKT 467 loose in box lead length 19.0 mm ±10% 51 53 55 57 -
±5%52545658 -
taped on reel ±10% 06 18 30 42 -
±5%07193143 -
MKT 468 loose in box long leads ±10% 51 53 55 57 -
±5%52545658 -
taped on reel ±10% 06 18 30 42 -
±5%07193143 -
MKT 469 loose in box lead length 4.0 mm ±10% 25 45 55 65 -
±5%26465666 -
lead length 22.0 mm ±10% 21 41 51 61 -
±5%22425262 -
taped on reel ±10% 28 48 58 68 -
±5%29495969 -
2222 46. XX XX X
TYPE AND PITCHES
467 10.0 mm
468
15/7.5 mm
15.0 mm
22.5 mm
27.5 mm
469 10.0 mm
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
Example:
104 = 10 x 10 = 100 nF
2001 Jun 22 4
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467
MKT 467 GENERAL DATA PITCH 10 mm (kinked leads)
Specific reference data for the 100 V DC capac itors
Available 100 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤120 ×10−4−
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 30 V/µs
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 467 04... preferred
±5% 2222 467 05... preferred
lt=19.0 ±4.0 mm ±10% 2222 467 51... on request
±5% 2222 467 52... on request
Taped on reel H =16.0 mm; P0=12.7mm ±10% 2222 467 06... on request
±5% 2222 467 07... on request
296x12(full_width)
seating plane (1)
l
Ødt
P
h
lt
α
ACBA100
b
(2)
Fig.3 Outline.
Dimensions in mm .
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
(3) A =2.0 ±0.5 mm.
2001 Jun 22 5
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467
URdc =100 V; URac =63 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=3.5 ±0.5 mm
C-tol =±10% C-tol =±5%
catalogue number last 5 digits
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.056
4.0 ×13.0 ×12.5 0.4
2222 467 04563 .. 05563
0.068 2222 467 04683 .. 05683
0.082 2222 467 04823 .. 05823
0.1 2222 467 04104 .. 05104
0.12 4.3 ×13.3 ×12.5 0.5 2222 467 04124 .. 05124
0.15 4.0 ×13.0 ×12.5 0.4 2222 467 04154 .. 05154
0.18 4.2 ×13.2 ×12.5 0.4 2222 467 04184 .. 05184
0.22 4.5 ×13.6 ×12.5 0.5 2222 467 04224 .. 05224
0.27 4.2 ×13.2 ×12.5 0.4 2222 467 04274 .. 05274
0.33 4.6 ×13.6 ×12.5 0.5 2222 467 04334 .. 05334
0.39 4.0 ×13.0 ×12.5 0.4 2222 467 04394 .. 05394
0.47 4.2 ×13.2 ×12.5 0.4 2222 467 04474 .. 05474
0.56 4.6 ×13.6 ×12.5 0.5 2222 467 04564 .. 05564
0.68 5.0 ×14.0 ×12.5 0.5 2222 467 04684 .. 05684
0.82 5.5 ×14.5 ×12.5 0.6 2222 467 04824 .. 05824
1.0 6.0 ×15.0 ×12.5 0.6 2222 467 04105 .. 05105
2001 Jun 22 6
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467
MKT 467 GENERAL DATA PITCH 10 mm (kinked leads)
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤120 ×10−4≤220 ×10−4
0.1 µF<C≤0.22 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 120 V /µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 467 16... preferred
±5% 2222 467 17... preferred
lt=19.0 ±4.0 mm ±10% 2222 467 53... on request
±5% 2222 467 54... on request
Taped on reel H =16.0 mm; P0=12.7mm ±10% 2222 467 18... on request
±5% 2222 467 19... on request
296x12(full_width)
seating plane (1)
l
Ødt
P
h
lt
α
ACBA100
b
(2)
Fig.4 Outline.
Dimensions in mm .
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
(3) A =2.0 ±0.5 mm.
2001 Jun 22 7
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467
URdc =250 V; URac =160 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=3.5 ±0.5 mm
C-tol =±10% C-tol =±5%
catalogue number last 5 digits
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.027 4.2 ×13.2 ×12.5 0.4 2222 467 16273 .. 17273
0.033 4.6 ×13.6 ×12.5 0.5 2222 467 16333 .. 17333
0.039 4.0 ×13.0 ×12.5 0.4 2222 467 16393 .. 17393
0.047 4.1 ×13.1 ×12.5 0.4 2222 467 16473 .. 17473
0.056 4.0 ×13.0 ×12.5 0.4 2222 467 16563 .. 17563
0.068 4.1 ×13.1 ×12.5 0.4 2222 467 16683 .. 17683
0.082 4.4 ×13.4 ×12.5 0.5 2222 467 16823 .. 17823
0.1 4.0 ×13.0 ×12.5 0.4 2222 467 16104 .. 17104
0.12 4.3 ×13.3 ×12.5 0.5 2222 467 16124 .. 17124
0.15 4.8 ×13.8 ×12.5 0.5 2222 467 16154 .. 17154
0.18 5.2 ×14.2 ×12.5 0.5 2222 467 16184 .. 17184
0.22 5.8 ×14.8 ×12.5 0.6 2222 467 16224 .. 17224
2001 Jun 22 8
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467
MKT 467 GENERAL DATA PITCH 10 mm (kinked leads)
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 170 V /µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 467 28... preferred
±5% 2222 467 29... preferred
lt=19.0 ±4.0 mm ±10% 2222 467 55... on request
±5% 2222 467 56... on request
Taped on reel H =16.0 mm; P0=12.7mm ±10% 2222 467 30... on request
±5% 2222 467 31... on request
296x12(full_width)
seating plane (1)
l
Ødt
P
h
lt
α
ACBA100
b
(2)
Fig.5 Outline.
Dimensions in mm .
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
(3) A =2.0 ±0.5 mm.
2001 Jun 22 9
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467
URdc =400 V; URac =200 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=3.5 ±0.5 mm
C-tol =±10% C-tol =±5%
catalogue number last 5 digits
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.001
4.5 ×13.5 ×12.5 0.5
2222 467 28102 .. 29102
0.0012 2222 467 28122 .. 29122
0.0015 2222 467 28152 .. 29152
0.0018 2222 467 28182 .. 29182
0.0022 4.0 ×13.0 ×12.5 0.4 2222 467 28222 .. 29222
0.0027 4.3 ×13.3 ×12.5 0.5 2222 467 28272 .. 29272
0.0033 4.6 ×13.6 ×12.5 0.5 2222 467 28332 .. 29332
0.0039 4.0 ×13.0 ×12.5 0.4 2222 467 28392 .. 29392
0.0047 4.1 ×13.2 ×12.5 0.4 2222 467 28472 .. 29472
0.0056 4.6 ×13.6 ×12.5 0.5 2222 467 28562 .. 29562
0.0068 4.2 ×13.2 ×12.5 0.4 2222 467 28682 .. 29682
0.0082 4.6 ×13.6 ×12.5 0.5 2222 467 28822 .. 29822
0.01 4.1 ×13.1 ×12.5 0.4 2222 467 28103 .. 29103
0.012 4.5 ×13.5 ×12.5 0.5 2222 467 28123 .. 29123
0.015 4.1 ×13.1 ×12.5 0.4 2222 467 28153 .. 29153
0.018 4.5 ×13.5 ×12.5 0.5 2222 467 28183 .. 29183
0.022 4.0 ×13.0 ×12.5 0.4 2222 467 28223 .. 29223
0.027 4.2 ×13.2 ×12.5 0.4 2222 467 28273 .. 29273
0.033 4.6 ×13.7 ×12.5 0.5 2222 467 28333 .. 29333
0.039 5.0 ×13.9 ×12.5 0.5 2222 467 28393 .. 29393
0.047 4.1 ×13.1 ×12.5 0.4 2222 467 28473 .. 29473
0.056 4.4 ×13.4 ×12.5 0.5 2222 467 28563 .. 29563
0.068 4.8 ×13.8 ×12.5 0.5 2222 467 28683 .. 29683
0.082 5.4 ×14.3 ×12.5 0.6 2222 467 28823 .. 29823
0.1 5.7 ×14.7 ×12.5 0.6 2222 467 28104 .. 29104
2001 Jun 22 10
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467
MKT 467 GENERAL DATA PITCH 10 mm (kinked leads)
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.033 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 120 V /µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 m inute
Withstanding (DC) voltage between leads and case 1260 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 467 40... preferred
±5% 2222 467 41... preferred
lt=19.0 ±4.0 mm ±10% 2222 467 57... on request
±5% 2222 467 58... on request
Taped on reel H =16.0 mm; P0=12.7mm ±10% 2222 467 42... on request
±5% 2222 467 43... on request
296x12(full_width)
seating plane (1)
l
Ødt
P
h
lt
α
ACBA100
b
(2)
Fig.6 Outline.
Dimensions in mm .
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
(3) A =2.0 ±0.5 mm.
2001 Jun 22 11
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467
URdc =630 V; URac =250 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=3.5 ±0.5 mm
C-tol =±10% C-tol =±5%
catalogue number last 5 digits
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.01 4.1 ×13.1 ×12.5 0.4 2222 467 40103 .. 41103
0.012 4.5 ×13.5 ×12.5 0.5 2222 467 40123 .. 41123
0.015 4.9 ×13.9 ×12.5 0.5 2222 467 40153 .. 41153
0.018 5.4 ×14.4 ×12.5 0.6 2222 467 40183 .. 41183
0.022 4.8 ×13.8 ×12.5 0.5 2222 467 40223 .. 41223
0.027 5.3 ×14.3 ×12.5 0.6 2222 467 40273 .. 41273
0.033 5.9 ×14.9 ×12.5 0.6 2222 467 40333 .. 41333
2001 Jun 22 12
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 468
MKT 468 GENERAL DATA PITCH 15/22.5 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 100 V DC capac itors
Available 100 V DC versions
Note
1. Length of long leads:
a) lt= 19.0 ±4.0 mm for lead pitch = 15.0 mm .
b) lt= 25.0 ±4.0 m m for lead pitch = 22.5 mm .
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz
C≤10.0 µF≤75 ×10−4≤120 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC):
lmax =17.5 mm 20 V/µs
lmax =26.0 mm 10 V/µs
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 04... preferred
±5% 2222 468 05... preferred
long leads; note 1 ±10 % 2222 468 51. .. on request
±5% 2222 468 52... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±10% 2222 468 06... on request
±5% 2222 468 07... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±10% 2222 468 61... preferred
±5% 2222 468 62... preferred
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
Fig.7 Outline.
Dimensions in mm .
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.4/−0.5 mm.
2001 Jun 22 13
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 468
URdc =100 V; URac =63 V
Note
1. Dimensions in brackets for bent back leads.
C
(µF)
DIMENSIONS(1)
bmax ×h(h’)
max ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX REEL DIAMETER =500 mm
short leads H =16.0 mm ; P0=15.0 mm
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue numbe r last 5 digits last 5 digits
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
1.2 5.5 ×14.5 (16.0) ×17.5 0.7 2222 468 04125 .. 05125 .. 61125 .. 62125
1.5 6.0 ×15.0 (16.5) ×17.5 0.9 2222 468 04155 .. 05155 .. 61155 .. 62155
1.8 6.5 ×15.5 (17.0) ×17.5 1.0 2222 468 04185 .. 05185 .. 61185 .. 62185
2.2 7.0 ×16.0 (17.5) ×17.5 1.2 2222 468 04225 .. 05225 .. 61225 .. 62225
2.7 8.0 ×17.0 (18.5) ×17.5 1.4 2222 468 04275 .. 05275 .. 61275 .. 62275
3.3 8.5 ×17.5 (19.0) ×17.5 1.5 2222 468 04335 .. 05335 .. 61335 .. 62335
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
3.9 6.5 ×18.5 ×26.0 2.8 2222 468 04395 .. 05395
not available
4.7 7.0 ×19.5 ×26.0 3.2 2222 468 04475 .. 05475
5.6 7.5 ×20.0 ×26.0 3.5 2222 468 04565 .. 05565
6.8 8.5 ×21.5 ×26.0 4.1 2222 468 04685 .. 05685
8.2 9.5 ×22.5 ×26.0 4.8 2222 468 04825 .. 05825
10.0 10.5 ×23.5 ×26.0 5.5 2222 468 04106 .. 05106
2001 Jun 22 14
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 468
MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
Notes
1. Taped on reel pitch = 27.5 m m is not available.
2. Length of long leads:
a) lt= 19.0 ±4.0 mm for lead pitch = 15.0 mm .
b) lt= 25.0 ±4.0 m m for lead pitch = 22.5 mm .
c) lt= 24.0 ±4.0 mm for lead pitch = 27.5 mm .
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.47 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
C>0.47 µF≤75 ×10−4≤120 ×10−4−
Rated voltage pulse slope (dU/dt)R at 250 V (DC):
lmax =17.5 mm 45 V/µs
lmax =26.0 mm 20 V/µs
lmax =30.0 mm 15 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 16... preferred
±5% 2222 468 17... preferred
long leads; note 2 ±10 % 2222 468 53. .. on request
±5% 2222 468 54... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±10% 2222 468 18... on request
±5% 2222 468 19... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±10% 2222 468 63... preferred
±5% 2222 468 64... preferred
Fig.8 Outline.
Dimensions in mm .
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
2001 Jun 22 15
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 468
URdc =250 V; URac =160 V
Note
1. Dimensions in brackets for bent back leads.
C
(µF)
DIMENSIONS(1)
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX REEL DIAMETER =500 mm
short leads H =16.0 mm ; P0=15.0 mm
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue numbe r last 5 digits last 5 digi ts
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.27 5.0 ×14.0 (15.5) ×17.5 0.6 2222 468 16274 .. 17274 .. 63274 .. 6 4274
0.33 5.5 ×14.5 (16.0) ×17.5 0.7 2222 468 16334 .. 17334 .. 63334 .. 6 4334
0.39 6.0 ×15.0 (16.5) ×17.5 0.9 2222 468 16394 .. 17394 .. 63394 .. 6 4394
0.47 6.5 ×15.5 (17.0) ×17.5 1.0 2222 468 16474 .. 17474 .. 63474 .. 6 4474
0.56 7.5 ×16.5 (18.0) ×17.5 1.3 2222 468 16564 .. 17564 .. 63564 .. 6 4564
0.68 8.0 ×17.0 (18.5) ×17.5 1.4 2222 468 16684 .. 17684 .. 63684 .. 6 4684
0.82 8.5 ×17.5 (19.0) ×17.5 1.5 2222 468 16824 .. 17824 .. 63824 .. 6 4824
1.0 8.0 ×20.0 (21.5) ×17.5 1.7 2222 468 16105 .. 17105 .. 63105 .. 6 4105
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
1.2 7.0 ×19.0 ×26.0 3.2 2222 468 16125 .. 17125
not available
1.5 8.0 ×21.0 ×26.0 3.8 2222 468 16155 .. 17155
1.8 9.0 ×22.0 ×26.0 4.1 2222 468 16185 .. 17185
2.2 9.8 ×23.0 ×26.0 4.8 2222 468 16225 .. 17225
2.7 11.0 ×24.0 ×26.0 5.9 2222 468 16275 .. 17275
3.3 12.5 ×25.5 ×26.0 6.9 2222 468 16335 .. 17335
3.9 13.5 ×26.5 ×26.0 7.5 2222 468 16395 .. 17395
4.7 14.9 ×28.0 ×26.0 8.6 2222 468 16475 .. 17475
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
5.6 15.0 ×28.0 ×30.0 9.1 2222 468 16565 .. 17565 not available
2001 Jun 22 16
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 468
MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
Notes
1. Taped on reel pitch = 27.5 m m is not available.
2. Length of long leads:
a) lt= 19.0 ±4.0 mm for lead pitch = 15.0 mm .
b) lt= 25.0 ±4.0 m m for lead pitch = 22.5 mm .
c) lt= 24.0 ±4.0 mm for lead pitch = 27.5 mm .
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.47 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
C>0.47 µF≤75 ×10−4≤120 ×10−4−
Rated voltage pulse slope (dU/dt)R at 400 V (DC):
lmax =17.5 mm 65 V/µs
lmax =26.0 mm 30 V/µs
lmax =30.0 mm 25 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 28... preferred
±5% 2222 468 29... preferred
long leads; note 2 ±10 % 2222 468 55. .. on request
±5% 2222 468 56... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±10% 2222 468 30... on request
±5% 2222 468 31... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±10% 2222 468 65... preferred
±5% 2222 468 66... preferred
Fig.9 Outline.
Dimensions in mm .
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
2001 Jun 22 17
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 468
URdc =400 V; URac =200 V
Note
1. Dimensions in brackets for bent back leads.
C
(µF)
DIMENSIONS(1)
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX REEL DIAMETER =500 mm
short leads H =16.0 mm ; P0=15.0 mm
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue numbe r last 5 digits last 5 digi ts
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.12 5.0 ×14.0 (15.5) ×17.5 0.6 2222 468 28124 .. 29124 .. 65124 .. 6 6124
0.15 5.8 ×15.0 (16.5) ×17.5 0.9 2222 468 28154 .. 29154 .. 65154 .. 6 6154
0.18 6.5 ×15.5 (17.0) ×17.5 1.0 2222 468 28184 .. 29184 .. 65184 .. 6 6184
0.22 7.0 ×15.5 (17.5) ×17.5 1.2 2222 468 28224 .. 29224 .. 65224 .. 6 6224
0.27 7.4 ×16.5 (18.0) ×17.5 1.3 2222 468 28274 .. 29274 .. 65274 .. 6 6274
0.33 8.5 ×17.5 (19.0) ×17.5 1.5 2222 468 28334 .. 29334 .. 65334 .. 6 6334
0.39 7.4 ×19.5 (21.0) ×17.5 1.3 2222 468 28394 .. 29394 .. 65394 .. 6 6394
0.47 8.4 ×20.5 (22.0) ×17.5 1.5 2222 468 28474 .. 29474 .. 65474 .. 6 6474
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.56 7.5 ×19.5 ×26.0 3.2 2222 468 28564 .. 29564
not available
0.68 8.0 ×21.0 ×26.0 3.8 2222 468 28684 .. 29684
0.82 9.0 ×22.0 ×26.0 4.5 2222 468 28824 .. 29824
1.0 9.9 ×23.0 ×26.0 5.2 2222 468 28105 .. 29105
1.2 11.0 ×24.0 ×26.0 5.9 2222 468 28125 .. 29125
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
1.5 11.5 ×24.5 ×30.0 6.5 2222 468 28155 .. 29155 not available1.8 12.5 ×25.5 ×30.0 7.1 2222 468 28185 .. 29185
2.2 14.0 ×27.0 ×30.0 8.2 2222 468 28225 .. 29225
2001 Jun 22 18
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 468
MKT 468 GENERAL DATA PITCH 15/22.5/27.5 mm
PITCH 7.5 m m (bent back leads)
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
Notes
1. Taped on reel pitch = 27.5 m m is not available.
2. Length of long leads:
a) lt= 19.0 ±4.0 mm for lead pitch = 15.0 mm .
b) lt= 25.0 ±4.0 m m for lead pitch = 22.5 mm .
c) lt= 24.0 ±4.0 mm for lead pitch = 27.5 mm .
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µFp ≤75 ×10−4≤120 ×10−4≤200 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
C>0.47 µF≤75 ×10−4≤120 ×10−4−
Rated voltage pulse slope (dU/dt)R at 630 V (DC):
lmax =17.5 mm 90 V/µs
lmax =26.0 mm 35 V/µs
lmax =30.0 mm 30 V/µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
RC between leads, for C >0.33 µF at 500 V; 1 minute >10000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 m inute
Withstanding (DC) voltage between leads and case 1260 V; 1 minute
PACKAGING(1) DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 40... preferred
±5% 2222 468 41... preferred
long leads; note 2 ±10 % 2222 468 57. .. on request
±5% 2222 468 58... on request
Taped on reel H =16.0 mm; P0=12.7 mm ±10% 2222 468 42... on request
±5% 2222 468 43... on request
Taped on reel
(ben t b a ck ) H=16.0 mm; P0=15.0 mm ±10% 2222 468 67... preferred
±5% 2222 468 68... preferred
Fig.10 Outline.
Dimensions in mm .
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) F−F’<0.3 mm.
F=7.5 +0.6/−0.1 mm.
(4) A =2.5 +1.4/−0.5 mm.
296x12(full_width)
296x12(full_width)
seating plane (1)
PØdt
bl
h
lt
α
A
(2)
b
h'
l
CBA818
F'
F
(3)
10 Ødt
H
15
2001 Jun 22 19
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 468
URdc =630 V; URac =250 V
Note
1. Dimensions in brackets for bent back leads.
C
(µF)
DIMENSIONS(1)
bmax ×h(h’)max ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOOSE IN BOX REEL DIAMETER =500 mm
short leads H =16.0 mm ; P0=15.0 mm
C-tol =±10% C-tol =±5% C-tol =±10% C-tol =±5%
catalogue numbe r last 5 digits last 5 digi ts
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.039 5.0 ×14.0 (15.5) ×17.5 0.6 2222 468 40393 .. 41393 .. 67393 .. 68393
0.047 5.5 ×14.5 (16.0) ×17.5 0.7 2222 468 40473 .. 41473 .. 67473 .. 68473
0.056 5.9 ×15.0 (16.5) ×17.5 0.9 2222 468 40563 .. 41563 .. 67563 .. 68563
0.068 6.5 ×16.0 (17.5) ×17.5 1.2 2222 468 40683 .. 41683 .. 67683 .. 68683
0.082 7.3 ×16.5 (18.0) ×17.5 1.3 2222 468 40823 .. 41823 .. 67823 .. 68823
0.1 7.9 ×17.0 (18.5) ×17.5 1.4 2222 468 40104 .. 41104 .. 67104 .. 68104
0.12 7.5 ×19.5 (21.0) ×17.5 1.3 2222 468 40124 .. 41124 .. 67124 .. 68124
0.15 8.5 ×20.5 (22.0) ×17.5 1.5 2222 468 40154 .. 41154 .. 67154 .. 68154
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.18 7.5 ×19.5 ×26.0 3.5 2222 468 40184 .. 41184
not available
0.22 8.0 ×21.0 ×26.0 3.8 2222 468 40224 .. 41224
0.27 9.0 ×22.0 ×26.0 4.5 2222 468 40274 .. 41274
0.33 10.0 ×23.0 ×26.0 5.2 2222 468 40334 .. 41334
0.39 11.5 ×24.0 ×26.0 5.9 2222 468 40394 .. 41394
0.47 12.5 ×25.5 ×26.0 6.9 2222 468 40474 .. 41474
0.56 13.5 ×26.6 ×26.0 7.5 2222 468 40564 .. 41564
0.68 15.0 ×28.0 ×26.0 8.6 2222 468 40684 .. 41684
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm pitch =7.5 mm (bent back)
0.82 15.0 ×28.0 ×30.0 8.8 2222 468 40824 .. 41824 not available
2001 Jun 22 20
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT/MKT 468
MKT/MKT 468 GENERA L DATA PITCH 15/22.5/27.5 mm
Specific reference data for the 1000 V DC capaci tors
Available 1000 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10-4 ≤120 ×10-4 ≤200 ×10-4
0.1 µF<C≤0.22 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 1000 V (DC)
P=15mm 200 V/ms
P=22.5mm 120 V/ms
P=27.5mm 100 V/ms
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1600; 1 minute
Withstanding (DC) voltage between leads and case 2000 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=3.5 ±0.5 mm ±10% 2222 468 60... preferred
296x12(full_width)
seating plane (1)
CBA266
P
l
lt
h
Ødt
b
A
(2)α
Fig.11 Outline.
Dimensions in mm .
(1) Hole ∅1.3 for dt=0.8 mm.
(2) 0 ≤α<50°.
(3) A =2.5 +1.4/−0.5 mm.
2001 Jun 22 21
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT/MKT 468
URdc =1000 V; URac =400 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
LOO SE IN BOX
lt=3.5 ±0.5 mm
C-tol =±10%
Pitch =15.0 ±0.4 mm; dt=0.80 ±0.08 mm
0.015 6.0 ×15.0 ×17.5 0.6 2222 468 60153
0.018 6.5 ×15.5 ×17.5 0.7 2222 468 60183
0.022 7.2 ×16.2 ×17.5 0.9 2222 468 60223
0.027 8.0 ×17.0 ×17.5 1.0 2222 468 60273
0.033 8.8 ×17.8 ×17.5 1.4 2222 468 60333
0.039 9.6 ×18.6 ×17.5 1.5 2222 468 60393
0.047 10.6 ×19.6 ×17.5 1.8 2222 468 60473
Pitch =22.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.056 7.0 ×20.0 ×26.0 3.2 2222 468 60563
0.068 8.0 ×21.0 ×26.0 3.8 2222 468 60683
0.082 8.5 ×21.5 ×26.0 4.1 2222 468 60823
0.1 9.5 ×22.5 ×26.0 4.8 2222 468 60104
0.12 10.5 ×23.5 ×26.0 5.5 2222 468 60124
Pitch =27.5 ±0.4 mm; dt=0.80 ±0.08 mm
0.15 10.5 ×23.5 ×30.0 5.8 2222 468 60154
0.18 11.5 ×24.5 ×30.0 6.5 2222 468 60184
0.22 13.0 ×26.0 ×30.0 7.5 2222 468 60224
2001 Jun 22 22
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 469
MKT 469 GENERAL DATA PITCH 10 mm (straight leads)
Specific reference data for the 100 V DC capac itors
Available 100 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤120 ×10−4−
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 30 V/µs
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 160 V; 1 minute
Withstanding (DC) voltage between leads and case 200 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0+1.0/−0.5 mm ±10% 2222 469 25... on request
±5% 2222 469 26... on request
lt=22.0 ±4.0 mm ±10% 2222 469 21... on request
±5% 2222 469 22... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 469 28... on request
±5% 2222 469 29... on request
296x12(full_width)
Ø1.3
≤1.5
l
lt
h
Ødt
P
seating plane (1)
b
CBA072
Fig.12 Outline.
Dimensions in mm .
(1) Hole ∅1.0 for dt=0.6 mm.
2001 Jun 22 23
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 469
URdc =100 V; URac =63 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.056
4.0 ×9.3 ×12.5 0.4
2222 469 25563
0.068 2222 469 25683
0.082 2222 469 25823
0.1 2222 469 25104
0.12 4.3 ×9.7 ×12.5 0.5 2222 469 25124
0.15 3.9 ×9.2 ×12.5 0.4 2222 469 25154
0.18 4.2 ×9.5 ×12.5 0.4 2222 469 25184
0.22 4.5 ×9.9 ×12.5 0.5 2222 469 25224
0.27 4.2 ×9.5 ×12.5 0.4 2222 469 25274
0.33 4.6 ×9.9 ×12.5 0.5 2222 469 25334
0.39 4.0 ×9.3 ×12.5 0.4 2222 469 25394
0.47 4.2 ×9.5 ×12.5 0.4 2222 469 25474
0.56 4.6 ×9.9 ×12.5 0.5 2222 469 25564
0.68 5.0 ×10.3 ×12.5 0.5 2222 469 25684
0.82 5.5 ×10.8 ×12.5 0.6 2222 469 25824
1.0 6.0 ×11.3 ×12.5 0.6 2222 469 25105
2001 Jun 22 24
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 469
MKT 469 GENERAL DATA PITCH 10 mm (straight leads)
Specific reference data for the 250 V DC capac itors
Available 250 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤120 ×10−4≤220 ×10−4
0.1 µF<C≤0.22 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 120 V /µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 400 V; 1 minute
Withstanding (DC) voltage between leads and case 500 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0+1.0/−0.5 mm ±10% 2222 469 45... on request
±5% 2222 469 46... on request
lt=22.0 ±4.0 mm ±10% 2222 469 41... on request
±5% 2222 469 42... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 469 48... on request
±5% 2222 469 49... on request
296x12(full_width)
Ø1.3
≤1.5
l
lt
h
Ødt
P
seating plane (1)
b
CBA072
Fig.13 Outline.
Dimensions in mm .
(1) Hole ∅1.0 for dt=0.6 mm.
2001 Jun 22 25
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 469
URdc =250 V; URac =160 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.027 4.2 ×9.5 ×12.5 0.4 2222 469 45273
0.033 4.6 ×9.9 ×12.5 0.5 2222 469 45333
0.039 4.0 ×9.3 ×12.5 0.4 2222 469 45393
0.047 4.1 ×9.4 ×12.5 0.4 2222 469 45473
0.056 4.0 ×9.3 ×12.5 0.4 2222 469 45563
0.068 4.1 ×9.4 ×12.5 0.4 2222 469 45683
0.082 4.4 ×9.7 ×12.5 0.5 2222 469 45823
0.1 4.0 ×9.3 ×12.5 0.4 2222 469 45104
0.12 4.3 ×9.7 ×12.5 0.5 2222 469 45124
0.15 4.8 ×10.1 ×12.5 0.5 2222 469 45154
0.18 5.2 ×10.5 ×12.5 0.5 2222 469 45184
0.22 5.8 ×11.1 ×12.5 0.6 2222 469 45224
2001 Jun 22 26
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 469
MKT 469 GENERAL DATA PITCH 10 mm (straight leads)
Specific reference data for the 400 V DC capac itors
Available 400 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.1 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 170 V /µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 640 V; 1 minute
Withstanding (DC) voltage between leads and case 800 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0+1.0/−0.5 mm ±10% 2222 469 55... on request
±5% 2222 469 56... on request
lt=22.0 ±4.0 mm ±10% 2222 469 51... on request
±5% 2222 469 52... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 469 58... on request
±5% 2222 469 59... on request
296x12(full_width)
Ø1.3
≤1.5
l
lt
h
Ødt
P
seating plane (1)
b
CBA072
Fig.14 Outline.
Dimensions in mm .
(1) Hole ∅1.0 for dt=0.6 mm.
2001 Jun 22 27
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 469
URdc =400 V; URac =200 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.001
4.5 ×9.9 ×12.5 0.5
2222 469 55102
0.0012 2222 469 55122
0.0015 2222 469 55152
0.0018 2222 469 55182
0.0022 4.0 ×9.3 ×12.5 0.4 2222 469 55222
0.0027 4.3 ×9.7 ×12.5 0.5 2222 469 55272
0.0033 4.6 ×9.9 ×12.5 0.5 2222 469 55332
0.0039 4.0 ×9.3 ×12.5 0.4 2222 469 55392
0.0047 4.1 ×9.5 ×12.5 0.4 2222 469 55472
0.0056 4.6 ×9.9 ×12.5 0.5 2222 469 55562
0.0068 4.2 ×9.5 ×12.5 0.4 2222 469 55682
0.0082 4.6 ×9.9 ×12.5 0.5 2222 469 55822
0.01 4.1 ×9.4 ×12.5 0.4 2222 469 55103
0.012 4.5 ×9.9 ×12.5 0.5 2222 469 55123
0.015 4.1 ×9.4 ×12.5 0.4 2222 469 55153
0.018 4.5 ×9.9 ×12.5 0.5 2222 469 55183
0.022 4.0 ×9.3 ×12.5 0.4 2222 469 55223
0.027 4.2 ×9.5 ×12.5 0.4 2222 469 55273
0.033 4.6 ×9.9 ×12.5 0.5 2222 469 55333
0.039 5.0 ×10.3 ×12.5 0.5 2222 469 55393
0.047 4.1 ×9.4 ×12.5 0.4 2222 469 55473
0.056 4.4 ×9.7 ×12.5 0.5 2222 469 55563
0.068 4.8 ×10.1 ×12.5 0.5 2222 469 55683
0.082 5.4 ×10.8 ×12.5 0.6 2222 469 55823
0.1 5.7 ×11.0 ×12.5 0.6 2222 469 55104
2001 Jun 22 28
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 469
MKT 469 GENERAL DATA PITCH 10 mm (straight leads)
Specific reference data for the 630 V DC capac itors
Available 630 V DC versions
DESCRIPTION VALUE
Tangent of loss angle: at 1 kHz at 10 kHz at 100 kHz
C≤0.033 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
Rated voltage pulse slope (dU/dt)R at 630 V (DC) 120 V /µs
R between leads, for C ≤0.33 µF at 500 V; 1 minute >30000 MΩ
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s 1008 V; 1 m inute
Withstanding (DC) voltage between leads and case 1260 V; 1 minute
PACKAGING DIMENSIONS C-tol FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
Loose in box lt=4.0+1.0/−0.5 mm ±10% 2222 469 65... on request
±5% 2222 469 66... on request
lt=22.0 ±4.0 mm ±10% 2222 469 61... on request
±5% 2222 469 62... on request
Taped on reel H =18.5 mm; P0=12.7 mm ±10% 2222 469 68... on request
±5% 2222 469 69... on request
296x12(full_width)
Ø1.3
≤1.5
l
lt
h
Ødt
P
seating plane (1)
b
CBA072
Fig.15 Outline.
Dimensions in mm .
(1) Hole ∅1.0 for dt=0.6 mm.
2001 Jun 22 29
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 469
URdc =630 V; URac =250 V
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOG UE NUMBE R
LOOSE IN BOX
lt=4.0 +1.0/−0.5 mm
C-tol =±10%
Pitch =10.0 ±0.4 mm; dt=0.60 ±0.06 mm
0.01 4.1 ×9.4 ×12.5 0.4 2222 469 65103
0.012 4.5 ×9.9 ×12.5 0.5 2222 469 65123
0.015 4.9 ×10.2 ×12.5 0.5 2222 469 65153
0.018 5.4 ×10.8 ×12.5 0.6 2222 469 65183
0.022 4.8 ×10.1 ×12.5 0.5 2222 469 65223
0.027 5.3 ×10.7 ×12.5 0.6 2222 469 65273
0.033 5.9 ×11.2 ×12.5 0.6 2222 469 65333
2001 Jun 22 30
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
CONSTRUCTION
Description
•Low-inductive w ound cell of metallize d polyethyl ene
terephthalate film
•Protected by a hard, water repellent, solvent resistant
epoxy lacque r
•Radial leads, solder coated.
144x12(halfpage)
connecting wire
metallized polyester film
metal spray layer
CBA073
Fig.16 Construction:
MKT 100, 250, 400 and 630 V.
144x12(halfpage)
metal spray layer
metallized polyester film
connecting wire CBA229
Fig.17 Construction: MKT/MKT 1000 V.
Mounting
NORMAL USE
The capacitors are designed for mounting on printed-circuit
boards. The capacitors packed in bandoliers are designed
for mounting on printed-circuit boards by means of
automatic insertion machines.
For detailed tape specifications refer to this handbook,
chapter “Packagi ng info rm ati on ”.
SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
In order to withstand vibration and shock tests, it must be
ensured that the underside of the crimps are in good contact
with the printed-circuit board:
•For pitches ≤15 mm capa citors shall be mech anic ally
fixed by the leads.
•For larger pitches the capacitors shall be mounted in the
same way and the body clamped.
Storage temperature
•Storage temperature: Tstg =−25 to +40 °C with RH
maximum 80% without conden sation.
RATINGS AND C HARACTERISTICS RE FE RENCE
CONDITIONS
Unless otherwise specified, all electrical values apply to an
ambient free air temperat ure of 23 ±1°C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 ±2%.
For reference testing, a conditioning period shall be applied
over 96 ±4 hours by heating the products in a circulating air
oven at the rated temperat ure and a rela tive hum idity not
exceeding 20%.
2001 Jun 22 31
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
CHARACTERISTICS
Capacitance
296x12(full_width) CBA074
-3
2
105
104
103
102
-2
-1
0
1
f (Hz)
∆C/C
(%)
Fig.18 Capacitance change as a function of frequency: typical curve.
296x12(full_width) CBA922
100-60 -20 6020
4
2
0
-2
-4
-6
6
max.
min.
Tamb (°C)
∆C/C
(%)
typical
400V - 630V - 1000V
250V
100V
Fig.19 Capacita nce as a function of ambien t free ai r temperat ure, measured at 1 kH z, 1 V.
2001 Jun 22 32
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Impedance
Maximum DC and AC voltage as a function of temperature
296x12(full_width)
107
CBA820
106
105
104
103
103
10-2
10-1
10 0
101
102
f (Hz)
Impedance
(Ω)
400V; 390nF
MKT 467/468/469
Fig.20 Impedance as a function of frequency: typical curve.
296x12(full_width)
0 20406080100
Tamb (°C)
CBB332
-60 -40 -20
1.2
1.0
0.8
0.6
0.4
0.2
0
factor
Fig.21 Multiplying factor for DC and AC voltage as a function of temperature.
2001 Jun 22 33
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Maximum RMS voltage and AC current (sinewave) as a function of frequency
296x12(full_width)
AC voltage
(V)
f (Hz) 106
CBA809
105
104
103
102
102
100
101
MKT 467/468/469
2.2 µF
1.0 µF
10 µF
Fig.22 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =100 V.
296x12(full_width)
AC voltage
(V)
f (Hz) 105
CBA810
104
103
102
101
102
100
101
MKT 467/468/469
1.0 µF
2.2 µF
10 µF
Fig.23 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =100 V.
2001 Jun 22 34
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
296x12(full_width) CBA811
105106
104
103
102
101
103
100
102
101
f (Hz)
AC voltage
(V)
MKT 467/468/469
220 nF
2.2 µF
5.6 µF
Fig.24 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =250 V.
296x12(full_width) CBA812
105106
104
103
102
101
103
100
102
101
f (Hz)
AC voltage
(V)
MKT 467/468/469
220 nF
2.2 µF
5.6 µF
Fig.25 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =250 V.
2001 Jun 22 35
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
296x12(full_width) CBA813
105106
104
103
102
101
103
100
102
101
f (Hz)
AC voltage
(V)
MKT 467/468/469
100 nF
470 nF
2.2 µF
Fig.26 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =400 V.
296x12(full_width) CBA814
105106
104
103
102
101
103
100
102
101
f (Hz)
AC voltage
(V)
MKT 467/468/469
100 nF
470 nF
2.2 µF
Fig.27 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =400 V.
2001 Jun 22 36
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
296x12(full_width) CBA815
105106
104
103
102
101
103
100
102
101
f (Hz)
AC voltage
(V)
MKT 467/468/469
820 nF
100 nF
10 nF
Fig.28 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =630 V.
296x12(full_width) CBA816
105106
104
103
102
101
103
100
102
101
f (Hz)
AC voltage
(V)
MKT 467/468/469
10 nF
100 nF
820 nF
Fig.29 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =630 V.
2001 Jun 22 37
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Maximum RMS current (sinewave) as a function of frequency
The maximum RMS current is defined by .
Uac is the maximum AC voltage depending on the ambient temperature in Figs 22 to 31.
296x12(full_width) CBA817
105106
104
103
102
101
103
100
102
101
f (Hz)
AC voltage
(V)
220 nF
MKT/MKT 468
100 nF
33 nF
Fig.30 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C for URdc =1000 V.
296x12(full_width) CBA950
105106
104
103
102
101
103
100
102
101
f (Hz)
AC voltage
(V)
220 nF
MKT/MKT 468
100 nF
33 nF
Fig.31 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤105 °C for URdc =1000 V.
Iac ωCU
ac
××=
2001 Jun 22 38
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Tangent of loss angle
Insulation resistance
296x12(full_width) CBA134
105
104
103
102
103
101
102
dissipation
factor
(x 10-4)
f (Hz)
1
2
3
4
5
C ≤ 0.33 µF (curve 1)
0.33 µF < C ≤ 1.2 µF (curve 2)
1.2 µF < C ≤ 3.9 µF (curve 3)
3.9 µF < C < 6.8 µF (curve 4)
C ≥ 6.8 µF (curve 5)
Fig.32 Tangent of loss angle as a function of frequency: typical curve.
296x12(full_width) CBA088
100
-60
105
102
104
103
RC
(s)
Tamb (°C)
-40 -20 0 20 40 60 80 100
Fig.33 RC product as a function of ambient free air temperature: typica l curve .
2001 Jun 22 39
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)
296x12(full_width)
0 20 40 60 80 100
Tamb (°C)
CBB191
-60 -40 -20
12
10
8
6
4
2
0
∆T
(°C) 14
16
Fig.34 Maximum allo wed compone nt temper atur e rise as a function of the ambient tempera ture .
2001 Jun 22 40
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C
Table 1 Heat conductivity
Power dissipation and maximum component tem p erature rise
The power dissipation must be limited in order not to exceed the maximum al lowe d component temperature rise as a
function of the free air ambient temperature.
The power dissipation can be calculated accor ding chapter “Introduction”, section “Maximum power dissipation”.
The component temperat ure ri se (∆T) can be measure d (see section “M easuring the component temper at ure” for more
details) or calculated by :
•∆T=component temperature rise (°C).
•P=power dissipation of the component (mW).
•G=heat conductivity of the component (mW/°C).
bmax
(mm)
ORIGINAL PITCH
(mm)
10 15 22.5 27.5
4.0 4.0 5.0 −−
4.5 4.5 6.0 −−
5.0 5.0 6.0 12.0 13.0
5.5 6.0 6.5 13.0 15.0
6.0 6.0 6.5 13.0 15.0
6.5 6.5 8.0 15.0 17.0
7.0 −8.0 15.0 17.0
7.5 −9.0 17.0 18.0
8.0 −9.0 17.0 20.0
8.5 −11.0 18.0 20.0
9.0 −11.0 18.0 22.0
9.5 −12.0 20.0 22.0
10.0 −12.0 20.0 23.0
10.5 −−22.0 25.0
11.0 −−−25.0
11.5 −−−27.0
12.0 −−−27.0
12.5 −−−30.0
13.0 −−−30.0
13.5 −−−30.0
14.0 −−−30.0
14.5 −−−33.0
15.0 −−−33.0
15.5 −−−37.0
16.0 −−−37.0
∆TPG⁄=
2001 Jun 22 41
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Measuring the component temperature
A thermocouple must be attached to the capacitor body as in Fig.35.
The temperature is measured in unloaded (Tamb) and maximum loaded condition
(Tc).
The temperature rise is given by .
To avoid radiation or convection, the capacitor should be tested in a wind-free
box.
144x12(halfpage) thermocouple
CBA771
Fig.35 Mounting the thermocouple.
∆TT
cTamb
–=
2001 Jun 22 42
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Application note and limiting conditions
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as
described hereunder. These mains applicati ons are strictly regulate d in safety standards and therefore electrom agne tic
interference suppression capacitors conforming the standards must be used.
To select the capacitor for a certain application, the following conditions must be che cked :
1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).
2. The peak- to-peak vol ta ge (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level .
3. The voltage pulse slope (dU/dt) shall not exc eed the rated voltage pul se slope in an RC-ci rcuit at rate d voltage and
without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied
by URdc and divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T is the pulse duration.
The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For hi gher temperatur es a derati ng factor
of 3% per K shall be applied.
4. The maximum component surface temperature rise must be lower than the limits in Fig.34.
5. Since in circuits u sed at voltag es over 280 V peak-to-p eak t he risk for an intrinsic ally act ive fl am mabi lit y after a
capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to
100 times the val ues me ntioned in Table 1 “Heat conductivity”.
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected
with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes
and surge voltages from the mains included):
VOLTAGE CONDITIONS FOR 6 ABOVE
ALLOWED VOLTAGES Tamb ≤85 °C85°C<Tamb ≤105 °C
Maximum continuous RMS voltage URac 0.8 ×URac
Maximum te mporary R MS -overvoltage (<24 hours) 1.25 ×URac 1.0 ×URac
Maximum peak voltage (Vo-p) (<2s) 1.6×URdc 1.3 ×URdc
2dU
dt
--------
2
0
T
∫dt×× URdc dU
dt
--------
rated
×<
2001 Jun 22 43
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Example
C=3300 nF - 100 V used for the voltage signal shown in Fig.36.
Up-p =80 V; Up=70 V; T1=0.5 ms; T2=1ms.
The ambient temperature is 35 °C.
Checking the conditions:
1. The peak voltage Up=70 V is lower than 100 V (DC).
2. The peak-to-peak voltage 80 V is lower than .
3. The voltage pulse slope dU/dt =80 V/500 µs=0.16 V/ µs.
This is lower than 20 V/µs (see specific reference data for each version).
4. The dissipated power is 60 mW as calculated with Fourier terms.
The temperature rise for bmax =8.5 m m and pitch =15 mm will be .
This is lower than 15 °C tem per atur e rise at 35 °C; see Fig.34.
5. Not applicable.
6. Not applicable.
2263VAC
()×× 178 Upp–
=
60 mW
11 mW °C⁄
------------------------------- 5.5 °C=
296x12(full_width)
Up
time
Up-p
voltage
CBA865
T1
T2
Fig.36 Voltage signal.
2001 Jun 22 44
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
MARKING
Product marking
STYLE MKT 467/468/469
Capacitors with original pitc h =10 mm
The capacitors are marked on the top or on the side (for
typical example see Fig.37), with the following information:
1. Rated capacitance code in nF, µF or in accordance with
“IEC 60062”
2. Tolerance on rated capacitanc e: K =±10%; J =±5%
3. Rated voltage (DC ).
144x12(halfpage) 470n K 100
CBA109
Fig.37 Typical example of marking for a
capacitor with origina l p itch =10 mm.
Capacitors with original pitc h =15, 22.5 and 27.5 mm
The capacitors are marked on the top or on the side (for
typical examples see Fi g.38 ) , with the fo llowing
information:
1. Manufacturer’s symbol
2. Rated capacitance code in nF, µF or in accordance with
“IEC 60062”
3. Tolerance on rated capacitanc e: K =±10%; J =±5%
4. Rated voltage (DC ).
144x12(halfpage) 820n J 100
CBB299
BC
Fig.38 Typical example of marking for a capacitor
with or iginal pitch =15, 22.5 and 27.5 mm.
STYLE MKT/MKT 468
The capacitors are marked on the top or on the side (for
typical example see Fig.39) with the following information:
1. Manufacturer’s symbol.
2. Rated capacitance code in nF, µF or in accordance with
“IEC 60062”
3. Tolerance on rated capacitanc e: K =±10%; J =±5%
4. Rated voltage (DC )
5. Code for dielectric materi al and construction
(MKT/MKT).
144x12(halfpage) 180n J 1000
MKT/MKT468 6
CBB075
BC
Fig.39 Typical example of marking.
2001 Jun 22 45
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
Package marking
The package containi ng the capa citors is marked as shown in Fig.40.
Fig.40 Barcode label.
Barcode label marking
LINE MARKING EXPLANATION
1 Manufacturer’s name
2 Country of origin
3Sub-family
4 Type description
5 Capacitance value, tolerance, voltage and
climatic category (“IEC 60068-1”)
6 Batchnumber (only for capacitors from PRC)
7•Country of origin: Belgium
Preference ori gi n code: A
Country of origin in code: 170 (Belgium)
Responsible production centre: HQ
Work order: WO
•Country of origin: China
Preference ori gi n code: N
Country of origin in code: 260 (PRC)
Responsible production centre: 07
8 Product type descript ion
9 Quantity and production period, year and week
code
10 Product code (12NC)
2001 Jun 22 46
BCcomponents Prod uct spec ification
Metallized polyester film capacitors MKT 467/468/469
MKT/MKT 468
QUICK REFERENCE TEST REQUIREMENTS
Note
1. Measuring fr equenc y 10 kH z.
TEST PROCEDURE
(quick reference) REQUIREMENTS
Robustness of leads
Tensile:
“IEC 60068-2-21”load 10 N; 10 s
no visible damage
legible marki ng
∆C/C≤2%
∆tan δ≤30 ×10−4; note 1
Bending:
“IEC 60068-2-21”load 5 N; 4 ×90 °
Resistance to soldering heat
“IEC 60068-2-20”solder bath: 260 °C; 10 s
Resistance to solvents isopropyl alcohol; 23 °C; 5 minutes
Robustness of component
Vibration:
“IEC 60068-2-6”10 to 55 Hz; amplitude 0.75 mm or
acceleration 98 m/s2; 6 hours ∆C/C≤3%
∆tan δ≤30 ×10−4; note 1
Shock:
“IEC 60068-2-27”half sinewave; 490 m/s2; 11 ms
Climatic sequenc e
Dry heat:
“IEC 60068-2-2”16 hours; 105 °C
∆C/C≤5%
∆tan δ≤50 ×10−4; note 1
Rins ≥50% of specified value
Damp heat cyclic, test Db, first cycle:
“IEC 60068-2-30”
Cold:
“IEC 60068-2-1”2 hours; −55 °C
Damp heat cyclic, test Db,
remaining cycles:
“IEC 60068-2-30”
Other applicable tests
Damp heat, steady state:
“IEC 60068-2-3”56 days; 40 °C; 90 to 95% R H ∆C/C≤5%
∆tan δ≤50 ×10−4; note 1
Rins ≥50% of specified value
Endurance (DC):
“IEC 60384-2”2000 hours:
1.25 ×URdc; 85 °C
1×URdc; 105 °C
∆C/C≤5%
∆tan δ≤30 ×10−4; note 1
Rins ≥50% of specified value
Heat storage:
“IEC 60384-2”2000 hours; 105 °C∆C/C≤3%
∆tan δ≤30 ×10−4; note 1
Resistance to soldering heat
with pr eheating:
“IEC 60384-2”
body temperature: 100 °C;
bath temperature: 260 °C;
dwell time : 1 0 s
∆C/C≤2%
∆tan δ≤30 ×10−4; note 1
