JFLEX-SERIALGPIO
up to 4x SERIALS, cablefree for external use
3x internal TTL for touch panels, GPS, etc.
4x 8 bit GPIO
Real low cost add-on
CAN Bus - optional
2x USB - cablefree - optional
Maximum exibility with JFLEX™!
If it‘s Embedded, it‘s Kontron.
JFLEX-SERIALGPIO1
JFLEX-SERIALGPIO-USB
JFLEX-SERIALGPIO-CAN
www.kontron.com/JRex
JFLEX-SERIALGPIO
The JFLEX-SERIALGPIO1 enhances JRex/ JFLEX bundles
to up to 5x COM besides PCMCIA and USB and scaleable
processor classes.
And that is done cable free, simply by stacking the JFLEX
on top of a JRex from the embedded line.
4x 8bit GPIO contribute heavily to the systems exibilty
and usabitlity, as they can be freely congured.
The optional CAN-Bus opens the door for automations
control as well as test&measurement applications.
Every JRex 3.5“ SBC features the interface to mount
#JFLEX-SERIALGPIO#040210ska
All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed
for inaccurancies. All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC® and JUMPtec® are registered trademarks of Kontron Embedded Modules GmbH, Germany. Rev #WEBtoNET-030301-e
Product Overview
Technical Information
US/ Canada
6260 Sequence Drive
San Diego, CA 92121-4371
Tel.: (858) 677-0877
Fax: (858) 677-0898
sales@us.kontron.com
Europe, Middle East & Africa
Brunnwiesenstr. 16
94469 Deggendorf - Germany
Tel.: +49 (0)991/ 370 24-100
Fax: +49 (0)991/ 370 24-102
sales-kem@kontron.com
Asia Pacic
5F-1, 341, Sec 4, Chung Hsiao E.
Rd, Taipei, Taiwan
Tel: +886 2 2781 5791
Fax: +886 2 2741 7379
sales@kontron.com.tw
Corporate Ofces
Ordering Information
a JFLEX™. JFLEX™ is an add-on I/O extension module
that can be rmly screwed on top of every JRex without
harming the JRex foot-print of the 3.5“ size. The I/O
functionality comes cable free with up to PCI performance
at a fraction of the average price of comparable add-
on solutions. By keeping it most cable free, low cost is
maintained and manual errors are minimized. Stacked on
top, the JFLEX concept opens the way for immediately
available, low cost and even customizable I/O extensions.
With JRex you stay...
...always a Jump ahead!
JFLEX connector
stackthrough for further JFLEX expansions
CAN-Bus (option)
with Philips SJA 1000 controller and with 2,54 mm internal DIN pinout
socket (no LPT2)
Dimensions
140,2 x 79,4 mm
Temperature
operation: 0° to 60°C, storage: -10° to 85°C
Humidity
operation: 10% to 90%, storage: 5% to 95% (non condensing)
JFLEX-SERIALGPIO1 features
4x COM, 32x GPIO, 1x LPT2, CAN option, USB option
DSUB sockets/ surface use
3x RS232, 1x RS485/422
2x USB (option)
2,54 mm internal DIN Pinout
3x RS232
1x RS485/422 (Jumper)
3x TTL - alternative to 3x RS232 use
32x 1bit GPIO (4x 8bit)
1x LPT2
Article Part.-No. Description
JFLEX-SERIALGPIO1 02055-1111-32-0 I/O extension for JRex boards with: 4x COM (3x RS232, 1x RS485/422, 3x TTL), 4x 8bit GPIO and
1x LPT
JFLEX-SERIALGPIO-CAN 02055-1111-32-1 I/O extension for JRex boards with: 4x COM (3x RS232, 1x RS485/422, 3x TTL), 4x 8bit GPIO and
CAN controller
JFLEX-SERIALGPIO-USB 02055-1112-32-0 I/O extension for JRex boards with: 3x COM (3x RS232, 3x TTL), 4x 8bit GPIO, 2x USB ports and 1x LPT
Picture of JRex and JFLEX
4x 8bit GPIO
LPT 2 (option)
JFLEX
3x TTL
RS232
(DSUB and internal)
RS422/485 DSUB
and internal (opion)
2x USB (option)
Jumper
CAN BUS
interface
(option)
