Bolivar Drive, P.O. Box 547, Bradford, PA 16701 USA
■
814-362-5536
■
Fax: 814-362-8883
■
www.koaspeer.com
D-10
Differential Terminator Network
RDB SERIES
Differential Terminator Network
Differential terminators are used to terminate differ-
ential-type SCSI bus lines. Data signals transmitted
at high speed and high frequencies generate reflec-
tions and a ringing effect, requiring impedance
matching along the signal path. A differential
terminator can be used to eliminate transmission
line effects with a combination of standard resistors
matching the characteristic impedance of the trans-
mission line. KOA’s silicon based thin film networks
provide exceptional stability and offer reliable
performance at high frequencies.
Features
■
Multiple terminating lines per package
■
Thin film on silicon
■
Excellent stability over time, temperature
and high frequencies
■
Cost-effective alternative to discrete components
■
Space saving surface mount network
Available Pin Configurations
n
= Number of Pins
See physical configurations on page D-11
for available pin/package configurations.
Applications
■
Differential SCSI termination
■
SCSI host adapter cards and other SCSI devices
Electrical Characteristics
Resistance Range. . . . . .
10Ωto 1MΩ
Resistance Tolerance . . .
Standard: ±5%, ±2%, ±1%
T.C.R. . . . . . . . . . . . . . .
Standard: ±100 ppm/°C
Tracking TCR . . . . . . . .
Typical: ±10 ppm/°C
Operating
Temperature Range . . . .
-55°C to +125°C
Storage
Temperature Range . . . .
-65°C to +150°C
Power Rating
@ 70°C . . . . . . . . . . . . .
100mW per resistor
Circuit Schematic