FEATURES
● Fast switching for high efficiency
● Low cost
● Diffused junction
● Low reverse leakage current
● Low forward voltage drop
● High current capability
● The plastic material carries UL recognition 94V-0
MECHANICAL DATA
●Case： Molded Plastic
●Polarity:Color band denotes cathode
●Weight: 0.003 ounces,0.093 grams
●Mounting position: Any
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25℃ ambient temperature unless otherwise specified.
Single phase, half wave ,60Hz, resistive or inductive load.
For capacitive load, derate current by 20%
CHARACTERISTICS SYMBOL RS2A RS2B RS2D RS2G RS2J RS2K RS2M UNIT
Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V
Maximum Average Forward
Rectified Current @TA=75 ℃
Peak Forward Surage Current
8.3ms Single Half Sine-Wave
Super Imposed on Rated Load(JEDEC Method)
Peak Forward Voltage at 2.0A DC VFV
Maximum DC Reverse Current @TJ=25℃
at Rated DC Blocking Voltage @TJ=100℃
Maximum Reverse Recovery Time(Note 1) TRR 250 ns
Typical Junction Capacitance (Note2) CJpF
Typical Thermal Resistance (Note3) RθJA ℃/W
Operating Temperature Range TJ℃
Storage Temperature Range TSTG ℃
2.Measured at 1.0 MHz and applied reverse voltage of 4.0V DC
20
~ 67 ~
A
100
IRuA
IFSM
-50 to +150
-50 to +150
REVERSE VOLTAGE - 50 to 1000 Volts
FORWARD CURRENT - 2.0 Amperes
I(AV) 2.0 A
SURFACE MOUNT
GLASS FAST RECOVERY RECTIFIERS
3.Thermal resistance junction of ambient.
NOTES: 1.Measured with IF=0.5A,IR=1A,IRR=0.25A
RS2A thru RS2M
5.0
25
150 500
1.3
60
30
SMB
.030(0.76)
.060(1.52)
.096(2.44)
.084(2.13)
.200(5.08)
.220(5.59) .008(.203)
.002(.051)
.006(.152)
.012(.305)
.160(4.06)
.185(4.70)
.130(3.30)
.155(3.94)
.083(2.11)
.075(1.91)
RATING AND CHARACTERTIC CURVES
RS2A thru RS2M
~ 68 ~
FIG. 1 – FORWARD CURRENT DERATING CURVE
AMBIENT TEMPERATURE (℃)
AVERAGE FORWARD CURRENT
AMPERES
0.5
025
1.0
1.5
50 75 100 125 150 175
2.0
SINGLE PHASE HALF WAVE 60Hz
RESISTIVE OR INDUCTIVE LOAD
FIG.4-TYPICAL FORWARD CHARACTERISTICS
INSTANTANEOUS FORWARD CURRENT,(A)
INSTANTANEOUS FORWARD VOLTAGE ,VOLTS
0.1
1.0
0.01
10
00.4 0.6
0.8
1.0 1.2 1.4 1.6 1.80.2
TJ = 25°C
PULSE WIDTH 300us
FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT
NUMBER OF CYCLES AT 60Hz
PEAK FORWARD SURGE CURRENT,
AMPERES
PULSE WIDTH 8.3ms
SINGLE HALF-SINE-WAVE
(JEDEC METHOD)
1
50
40
30
20
10
0
60
10
2 5 20 50 100
FIG.3 – TYPICAL JUNCTION CAPACITANCE
CAPACITANCE ,(pF)
REVERSE VOLTAGE ,VOLTS
1
100
10
1410 100
TJ = 25°C f = 1 MHZ
RS2A - RS2G
RS2J - RS2M
