DS26C32AM, DS26C32AT www.ti.com SNLS382C - JUNE 1998 - REVISED APRIL 2013 DS26C32AT/DS26C32AM Quad Differential Line Receiver Check for Samples: DS26C32AM, DS26C32AT FEATURES DESCRIPTION * * The DS26C32A is a quad differential line receiver designed to meet the RS-422, RS-423, and Federal Standards 1020 and 1030 for balanced and unbalanced digital data transmission, while retaining the low power characteristics of CMOS. 1 2 * * * * * * * CMOS Design for Low Power 0.2V Sensitivity over Input Common Mode Voltage Range Typical Propagation Delays: 19 ns Typical Input hysteresis: 60 mV Inputs Won't Load Line When VCC = 0V Meets the Requirements of EIA Standard RS422 TRI-STATE Outputs for Connection to System Buses Available in Surface Mount Mil-Std-883C Compliant The DS26C32A has an input sensitivity of 200 mV over the common mode input voltage range of 7V. The DS26C32A features internal pull-up and pulldown resistors which prevent output oscillation on unused channels. The DS26C32A provides an enable and disable function common to all four receivers. It also features TRI-STATE outputs with 6 mA source and sink capability. This product is pin compatible with the DS26LS32A and the AM26LS32. Logic Diagram 1 2 Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1998-2013, Texas Instruments Incorporated DS26C32AM, DS26C32AT SNLS382C - JUNE 1998 - REVISED APRIL 2013 www.ti.com Connection Diagrams Top View For Complete Military Product Specifications, refer to the appropriate SMD or MDS. Figure 1. PDIP Package See Package Number D0016A or NFG0016E See Package Number NAJ0020A, NFE0016A or NAD0016A Top View Figure 2. 20-Lead Ceramic Leadless Chip Carrier LCCC Package These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates. 2 Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT DS26C32AM, DS26C32AT www.ti.com SNLS382C - JUNE 1998 - REVISED APRIL 2013 Absolute Maximum Ratings (1) (2) (3) Supply Voltage (VCC) 7V Common Mode Range (VCM) 14V Differential Input Voltage (V DIFF) 14V Enable Input Voltage (V IN) 7V -65C to +150C Storage Temperature Range (T STG) Lead Temperature (Soldering 4 sec.) Maximum Power Dissipation at 25C 260C (4) Ceramic NFE0016A Package 2308 mW Plastic NFG0016E Package 1645 mW SOIC D0016A Package 1190 mW Ceramic NAJ0020A Package 2108 mW Ceramic NAD0016A Package 1215 mW Maximum Current Per Output 25 mA This device does not meet 2000V ESD rating. (5) (1) Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that the device should be operated at these limits. The table of "Electrical Characteristics" provides conditions for actual device operation. Unless otherwise specified, all voltages are referenced to ground. If Military/Aerospace specified devices are required, please contact the TI Sales Office/Distributors for availability and specifications Ratings apply to ambient temperature at 25C. Above this temperature derate N Package 13.16 mW/C, J Package 15.38 mW/C, M Package 9.52 mW/C, E Package 12.04 mW/C, and W package 6.94 mW/C. ESD Rating: HBM (1.5 k, 100 pF) Inputs 2000V All other pins 1000V EIAJ (0, 200 pF) 350V (2) (3) (4) (5) Operating Conditions Supply Voltage (VCC) Min Max Units 4.50 5.50 V Operating Temperature Range (TA) DS26C32AT -40 +85 C DS26C32AM -55 +125 C 500 ns Enable Input Rise or Fall Times DC Electrical Characteristics VCC = 5V 10% (unless otherwise specified) (1) Parameter Test Conditions Min Typ Max Units -200 35 +200 mV VTH Minimum Differential Input Voltage V OUT = VOH or VOL -7V < VCM < +7V RIN Input Resistance VIN = -7V, +7V (Other Input = GND) DS26C32AT 5.0 6.8 10 k DS26C32AM 4.5 6.8 11 k VIN = +10V, Other Input = GND DS26C32AT +1.1 +1.5 mA DS26C32AM +1.1 +1.8 mA VIN = -10V, Other Input = GND DS26C32AT -2.0 -2.5 mA -2.0 -2.7 mA IIN VOH VOL Input Current Minimum High Level Output Voltage V CC = Min, VDIFF = +1V Maximum Low Level Output Voltage V CC = Max, VDIFF = -1V VIH Minimum Enable High Input Level Voltage VIL Maximum Enable Low Input Level Voltage (1) DS26C32AM 3.8 4.2 V I OUT = -6.0 mA 0.2 0.3 V I OUT = 6.0 mA 2.0 V 0.8 V Absolute Maximum Ratings are those values beyond which the safety of the device cannot be ensured. They are not meant to imply that the device should be operated at these limits. The table of "Electrical Characteristics" provides conditions for actual device operation. Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT Submit Documentation Feedback 3 DS26C32AM, DS26C32AT SNLS382C - JUNE 1998 - REVISED APRIL 2013 www.ti.com DC Electrical Characteristics (continued) VCC = 5V 10% (unless otherwise specified)(1) Parameter Test Conditions Min Typ Max Units 0.5 5.0 A 1.0 A IOZ Maximum TRI-STATE Output Leakage Current V OUT = VCC or GND, ENABLE = VIL, ENABLE = VIH II Maximum Enable Input Current V IN = VCC or GND ICC Quiescent Power Supply Current VCC = Max, DS26C32AT 16 23 mA VDIF = +1V DS26C32AM 16 25 mA Input Hysteresis V CM = 0V VHYST 60 mV AC Electrical Characteristics VCC = 5V 10% (1) Parameter tPLH, tPHL Test Conditions Propagation Delay Input to Output CL = 50 pF Min Typ 10 Max Units DS26C32AT DS26C32AM 19 30 35 ns 4 9 9 ns 13 22 29 ns 13 23 29 ns VDIFF = 2.5V VCM = 0V tRISE, tFALL Output Rise and Fall Times tPLZ, tPHZ Propagation Delay ENABLE to Output tPZL, tPZH Propagation Delay ENABLE to Output CL = 50 pF VDIFF = 2.5V VCM = 0V CL = 50 pF RL = 1000 VDIFF = 2.5V CL = 50 pF RL = 1000 VDIFF = 2.5V (1) Unless otherwise specified, Min/Max limits apply over recommended operating conditions. All typicals are given for VCC = 5V and TA = 25C. Comparison Table of Switching Characteristics into "LS-Type" Load (Figure 6, Figure 7, and Figure 8) (1) Parameter tPLH Input to Output Test Conditions CL = 15 pF tPHL tLZ ENABLE to Output CL = 5 pF ENABLE to Output CL = 15 pF tHZ tZL tZH (1) 4 DS26C32A DS26LS32A Typ Typ 17 23 ns 19 23 ns 13 15 ns 12 20 ns 13 14 ns 13 15 ns Units This table is provided for comparison purposes only. The values in this table for the DS26C32A reflect the performance of the device, but are not tested. Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT DS26C32AM, DS26C32AT www.ti.com SNLS382C - JUNE 1998 - REVISED APRIL 2013 TEST AND SWITCHING WAVEFORMS Figure 3. Propagation Delay CL includes load and test jig capacitance. S1 = VCC for t PZL, and tPLZ measurements. S1 = Gnd for tPZH and tPHZ measurements. Figure 4. Test Circuit for TRI-STATE Output Tests Figure 5. TRI-STATE Output Enable and Disable Waveforms AC Test Circuit and Switching Time Waveforms Figure 6. Load Test Circuit for TRI-STATE Outputs for "LS-Type" Load Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT Submit Documentation Feedback 5 DS26C32AM, DS26C32AT SNLS382C - JUNE 1998 - REVISED APRIL 2013 www.ti.com Figure 7. Propagation Delay for "LS-Type" Load (1) Diagram shown for ENABLE low. (2) S1 and S2 of load circuit are closed except where shown. (3) Pulse generator for all pulses: Rate 1.0 MHz; ZO = 50; tr 15 ns; t f 6.0 ns. Figure 8. Enable and Disable Times for "LS-Type" Load Truth Table (1) ENABLE ENABLE Input Output L H X Z VID V TH (Max) H All Other Combinations of Enable Inputs (1) VID V TH (Min) L Open H Z = TRI-STATE TYPICAL APPLICATIONS Figure 9. Two-Wire Balanced Systems, RS-422 6 Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT DS26C32AM, DS26C32AT www.ti.com SNLS382C - JUNE 1998 - REVISED APRIL 2013 Typical Performance Characteristics Differential Propagation Delay vs Temperature Differential Propagation Delay vs Power Supply Voltage Figure 10. Figure 11. Differential Skew vs Temperature Differential Skew vs Power Supply Voltage Figure 12. Figure 13. Output High Voltage vs Output High Current Output High Voltage vs Output High Current Figure 14. Figure 15. Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT Submit Documentation Feedback 7 DS26C32AM, DS26C32AT SNLS382C - JUNE 1998 - REVISED APRIL 2013 www.ti.com Typical Performance Characteristics (continued) 8 Output Low Voltage vs Output Low Current Output Low Voltage vs Output Low Current Figure 16. Figure 17. Input Resistance vs Input Voltage Input Current vs Power Supply Voltage Figure 18. Figure 19. Hysteresis & Differential Transition Voltage vs Temperature Hysteresis & Differential Transition Voltage vs Power Supply Voltage Figure 20. Figure 21. Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT DS26C32AM, DS26C32AT www.ti.com SNLS382C - JUNE 1998 - REVISED APRIL 2013 Typical Performance Characteristics (continued) Supply Current vs Temperature Disabled Supply Current vs Power Supply Voltage Figure 22. Figure 23. Supply Current vs Data Rate Figure 24. Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT Submit Documentation Feedback 9 DS26C32AM, DS26C32AT SNLS382C - JUNE 1998 - REVISED APRIL 2013 www.ti.com REVISION HISTORY Changes from Revision B (April 2013) to Revision C * 10 Page Changed layout of National Data Sheet to TI format ............................................................................................................ 9 Submit Documentation Feedback Copyright (c) 1998-2013, Texas Instruments Incorporated Product Folder Links: DS26C32AM DS26C32AT PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Pins Package Drawing Qty Eco Plan Lead/Ball Finish MSL Peak Temp (2) (6) (3) Op Temp (C) Device Marking (4/5) DS26C32ATM/NOPB ACTIVE SOIC D 16 48 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS26C32ATM DS26C32ATMX/NOPB ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU SN Level-1-260C-UNLIM -40 to 85 DS26C32ATM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) RoHS: TI defines "RoHS" to mean semiconductor products that are compliant with the current EU RoHS requirements for all 10 RoHS substances, including the requirement that RoHS substance do not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, "RoHS" products are suitable for use in specified lead-free processes. TI may reference these types of products as "Pb-Free". RoHS Exempt: TI defines "RoHS Exempt" to mean products that contain lead but are compliant with EU RoHS pursuant to a specific EU RoHS exemption. Green: TI defines "Green" to mean the content of Chlorine (Cl) and Bromine (Br) based flame retardants meet JS709B low halogen requirements of <=1000ppm threshold. Antimony trioxide based flame retardants must also meet the <=1000ppm threshold requirement. (3) MSL, Peak Temp. - The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. (4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device. (5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation of the previous line and the two combined represent the entire Device Marking for that device. (6) Lead/Ball Finish - Orderable Devices may have multiple material finish options. Finish options are separated by a vertical ruled line. Lead/Ball Finish values may wrap to two lines if the finish value exceeds the maximum column width. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 Samples PACKAGE OPTION ADDENDUM www.ti.com 24-Aug-2018 Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2018 TAPE AND REEL INFORMATION *All dimensions are nominal Device DS26C32ATMX/NOPB Package Package Pins Type Drawing SOIC D 16 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2500 330.0 16.4 Pack Materials-Page 1 6.5 B0 (mm) K0 (mm) P1 (mm) 10.3 2.3 8.0 W Pin1 (mm) Quadrant 16.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 10-Aug-2018 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) DS26C32ATMX/NOPB SOIC D 16 2500 367.0 367.0 35.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated (TI) reserves the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. TI's published terms of sale for semiconductor products (http://www.ti.com/sc/docs/stdterms.htm) apply to the sale of packaged integrated circuit products that TI has qualified and released to market. Additional terms may apply to the use or sale of other types of TI products and services. Reproduction of significant portions of TI information in TI data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such reproduced documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyers and others who are developing systems that incorporate TI products (collectively, "Designers") understand and agree that Designers remain responsible for using their independent analysis, evaluation and judgment in designing their applications and that Designers have full and exclusive responsibility to assure the safety of Designers' applications and compliance of their applications (and of all TI products used in or for Designers' applications) with all applicable regulations, laws and other applicable requirements. Designer represents that, with respect to their applications, Designer has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm and take appropriate actions. Designer agrees that prior to using or distributing any applications that include TI products, Designer will thoroughly test such applications and the functionality of such TI products as used in such applications. TI's provision of technical, application or other design advice, quality characterization, reliability data or other services or information, including, but not limited to, reference designs and materials relating to evaluation modules, (collectively, "TI Resources") are intended to assist designers who are developing applications that incorporate TI products; by downloading, accessing or using TI Resources in any way, Designer (individually or, if Designer is acting on behalf of a company, Designer's company) agrees to use any particular TI Resource solely for this purpose and subject to the terms of this Notice. TI's provision of TI Resources does not expand or otherwise alter TI's applicable published warranties or warranty disclaimers for TI products, and no additional obligations or liabilities arise from TI providing such TI Resources. TI reserves the right to make corrections, enhancements, improvements and other changes to its TI Resources. TI has not conducted any testing other than that specifically described in the published documentation for a particular TI Resource. Designer is authorized to use, copy and modify any individual TI Resource only in connection with the development of applications that include the TI product(s) identified in such TI Resource. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER TI INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT OF TI OR ANY THIRD PARTY IS GRANTED HEREIN, including but not limited to any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information regarding or referencing third-party products or services does not constitute a license to use such products or services, or a warranty or endorsement thereof. Use of TI Resources may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. TI RESOURCES ARE PROVIDED "AS IS" AND WITH ALL FAULTS. TI DISCLAIMS ALL OTHER WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED, REGARDING RESOURCES OR USE THEREOF, INCLUDING BUT NOT LIMITED TO ACCURACY OR COMPLETENESS, TITLE, ANY EPIDEMIC FAILURE WARRANTY AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS. TI SHALL NOT BE LIABLE FOR AND SHALL NOT DEFEND OR INDEMNIFY DESIGNER AGAINST ANY CLAIM, INCLUDING BUT NOT LIMITED TO ANY INFRINGEMENT CLAIM THAT RELATES TO OR IS BASED ON ANY COMBINATION OF PRODUCTS EVEN IF DESCRIBED IN TI RESOURCES OR OTHERWISE. IN NO EVENT SHALL TI BE LIABLE FOR ANY ACTUAL, DIRECT, SPECIAL, COLLATERAL, INDIRECT, PUNITIVE, INCIDENTAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES IN CONNECTION WITH OR ARISING OUT OF TI RESOURCES OR USE THEREOF, AND REGARDLESS OF WHETHER TI HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Unless TI has explicitly designated an individual product as meeting the requirements of a particular industry standard (e.g., ISO/TS 16949 and ISO 26262), TI is not responsible for any failure to meet such industry standard requirements. Where TI specifically promotes products as facilitating functional safety or as compliant with industry functional safety standards, such products are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using products in an application does not by itself establish any safety features in the application. Designers must ensure compliance with safety-related requirements and standards applicable to their applications. Designer may not use any TI products in life-critical medical equipment unless authorized officers of the parties have executed a special contract specifically governing such use. Life-critical medical equipment is medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S. TI may expressly designate certain products as completing a particular qualification (e.g., Q100, Military Grade, or Enhanced Product). Designers agree that it has the necessary expertise to select the product with the appropriate qualification designation for their applications and that proper product selection is at Designers' own risk. Designers are solely responsible for compliance with all legal and regulatory requirements in connection with such selection. Designer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Designer's noncompliance with the terms and provisions of this Notice. Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2018, Texas Instruments Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Texas Instruments: DS26C32ATM DS26C32ATM/NOPB DS26C32ATMX DS26C32ATMX/NOPB