CCT272440-80-10-02 - TDK Corporation

SENSORS

September 2016

Clamp Type AC Current Sensors

For energy management systems

CCT series

CCT406393

CCT354571

CCT323047

CCT272440

CCT261631

(2/13)

20160916 / sensor_current_cct_en.fm

SENSORS

An attention matter on use

Please read this specifications before using this product by all means.

An attention matter on security

I undertake use with this product, and it is paid at tention enough, and please design an attention matter safely.

When choosing load resistances us ed for current detection, be sure to select products with high precision and good temperature characteristics.

Magnetic flux to leak out occurs. Please confirm i t about influence of magnetic flux beforehand.

There is fear to cause false movement of machinery.

The product is not quakeproof structure.

Accordingl y please do not add vibration and a shock to it.

There is fear to lose a function.

Please do not use it when you let a product drop.

The product produces possibilit y to lose a function

Please avoid the next place. The place that receives a drop of water , trash, the dust, foggy influence. The place where direct ra ys of the sun hits. There is

fear to cause false movement of machinery.

Please prohibit safekeeping and use at the next place. Environment to be accompanied with gas corrosion, salt, acid, alkali. There is fear to lose a

function.

When you carry the product on a base of an electric circuit.

Please do not use a metal tool. Because impossible power is added to a prod uct.

There is fear to lose a function.

I considered the next matter, and we designed a product.

Safe standard and power supply voltage and circuit drive conditio n, drive frequency and Duty ON-TIME.

By those conditions, we decided structure and the turns number.

Please avoid use in designed co ndition outside.

There are destruction of a cir cuit part and fear of ignition.

This product considered a characteristic of a component and a self temperature rise, and it was made.

We select range of humidity as use temperature already.

Please avoid use by range more than this.

There are the damage and fear of ignition.

Please avoid use in the environment next.

The environment that trash and the dust stick to a produc t. There is fear to cause a fire.

The products l isted on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equipment, home

appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equipmen t, industrial robots) un de r a

normal operation and use condition.

The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or quality require a mor e

stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society, person or property.

If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions set forth in the

each catalog, please contact us.

(1) Aerospace/Aviation equipment

(2) Transportation equip m ent (cars, electric trains, ships, etc.)

(3) Medical equipment

(4) Power-generation control equipment

(5) Atomic en ergy-related equipment

(6) Seabed equi pment

(7) Transportation control equipment

(8) Public information-processing equipment

(9) Military equipment

(10) Elect ric heating appa ratus, burning equipment

(11) Disast er prevention/crime prevent ion equipment

(12) Safety equipment

(13) Other applications that are not considered general-purpose

applications

When designing y our equipment even f or general-purpose applications, you are kindly requested to take into consideration securing protection c ircuit/ de vice

or providing backup cir cuits in your equipment.

Attention on a design

Attention on the handling

Attention

SENSORS

(3/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

Clamp Type AC Current Sensors

For energy management systems

FEATURES

Clamp type for easy installation on existing power equipment.

Accommodates automatic processes from wire wrapping and winding to soldering, eusuring high-quality and stable supply.

Equipped with a built-in open-circuit protective device.

Product compatible with RoHS directive.

APPLICATION

For energy management systems such as HEMS, BEMS, FEMS, CEMS

PAR T NU MB ER CONSTRUCTION

OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT

Operating temperature range includes self-temperature rise.

The Storage temperature range is for after the assembly.

Overview of the CCT Series

CCT 406393 - 600 - 36 - 00

Series name External Current Internal clamp section

diameter Internal code

40 L (Length) 600 600A 36 36mm

63 W (Width) 300 300A 24 24mm

93 H (Height) 100 100A 16 16mm

80 80A 10 10mm

30 30A 06 06mm

Type

Temperature range Package quantity Individual weight

Operating

temperatureStorage

temperature

(°C）(°C）(pieces/box) (g）

CCT406393 –20 to 60 –30 to 60 8 535

CCT354571 –20 to 60 –30 to 60 24 221

CCT323047 –20 to 60 –30 to 60 36 70

CCT272440 –20 to 60 –30 to 60 36 41

CCT261631 –20 to 60 –30 to 60 60 24

Product compatible with RoHS directive

Compatible with lead-free solders

RoHS Directive Compliant Product: See the following for more details.https://product.t dk.com/info/en/environment/rohs/index.html

SENSORS

(4/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series

CCT406393 Type

SHAPE & DIMENSIONS

CIRCUIT DIAGR AM

Dimensions in mm

40.0±1.0

56.0max.

63.0±1.0

96.0max.155±15

40.0±1.0

67.0max.

K→L

ø36

–0.5

White:k

Black:ℓ

-00 Output connector

Pin contact: SYM-001T-P0.6 (JST)

Receptacle housing: SMR-02V-B (JST)

-02 Output onnector

Pin contact: SPAL-001T-P0.5 (JST)

Receptacle housing: PALR-02VF (JST)

* The connector specification differs depending on the last digit number.

Lℓ

(Primary side) (Second side)

SENSORS

(5/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series CCT406393 Type

SPECIFICATION

ELECTRICAL CHARACTERISTICS

MEASURING DIAGRAM

OUTPUT VOLTAGE CHARACTERISTIC

Part No. CCT406393-600-36-00 CCT406393-600-36-02

Applied cu rrent AC 1.0 to 600Arms (50/60Hz) AC 1.0 to 600Arms (50/60Hz)

Maximum allowed current AC 700Arms continuous AC 700Arms continuous

Internal clamp section diameter 36mm 36mm

Nominal current transformation ratio 3000:1 3000:1

Output current accuracy 200. 0mA±1% (600A, 50/60Hz) 200.0mA±1% (600A, 50/60Hz)

Phase difference 0.35°±0.2°(10, 600A, 50/60Hz) 0.35°±0.2°(10, 600A, 50/60Hz)

Secondary winding resistance 6464

Open-circuit protection 7.5V Clamp element 7.5V Clamp ele ment

Output

connector Pin contact SYM-001T-P0.6 (JST) SPAL-001T-P0.5 (JST)

Receptacle housing SMR-02V-B (JST) PALR-02VF (JST)

Adaptation

connector Socket contact SHF-001T-0.8BS (JST) SPHD-001T-P0.5 (JST)

Plug housing SMP-02V (JST) PAP-02V-S (JST)

Output lead wire AWG22 155mm AWG22 155mm

Allowable desorption number of times About100 times About100 times

Withstanding Voltage AC2200V, 1min. (Between outer case and outpu t) AC2200V, 1min. (Bet ween outer case and output)

Insulation Resistance 100MOver (DC500V) 100MOver (DC500V)

Flame retardant grade UL 94 V-0 UL 94 V-0

Output voltage Vo

Current transformer Load resistance RL

Constant current

source

Ambient temperature: 25℃

Through current Ii

0.1 1 10 1000100

0.1

10000

1000

100

Through current Ii(Arms)

Output voltage Vo(mVrms)

RL=1kΩ

RL=100Ω

RL=10Ω

SENSORS

(6/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series

CCT354571 Type

SHAPE & DIMENSIONS

CIRCUIT DIAGR AM

Dimensions in mm

Black:ℓWhite:k

35.2±0.5

39.5max.

45.0±0.5

72.0max.140±15

24.0±0.5

48.5max.

K→L

ø24

–0.5

-00 Output connector

Pin contact: SYM-001T-P0.6 (JST)

Receptacle housing: SMR-02V-B (JST)

-02 Output connector

Pin contact: SPAL-001T-P0.5 (JST)

Receptacle housing: PALR-02VF (JST)

* The connector specification differs depending on the last digit number.

Lℓ

(Primary side) (Second side)

SENSORS

(7/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series CCT354571 Type

SPECIFICATION

ELECTRICAL CHARACTERISTICS

MEASURING DIAGRAM

OUTPUT VOLTAGE CHARACTERISTIC

Part No. CCT354571-300-24-00 CCT354571-300-24-02

Applied cu rrent AC 0.1 to 300Arms (50/60Hz) AC 0.1 to 300Arms (50/60Hz)

Maximum allowed current AC 400Arms continuous AC 400Arms continuous

Internal clamp section diameter 24mm 24mm

Nominal current transformation ratio 3000:1 3000:1

Output current accuracy 100. 0mA±1% (300A, 50/60Hz) 100.0mA±1% (300A, 50/60Hz)

Phase difference 0.7°±0.5° (10, 300A, 50/60Hz) 0.7°±0.5° (10, 300A, 50/60Hz)

Secondary winding resistance 103103

Open-circuit protection 7.5V Clamp element 7.5V Clamp ele ment

Output

connector Pin contact SYM-001T-P0.6 (JST) SPAL-001T-P0.5 (JST)

Receptacle housing SMR-02V-B (JST) PALR-02VF (JST)

Adaptation

connector Socket contact SHF-001T-0.8BS (JST) SPHD-001T-P0.5 (JST)

Plug housing SMP-02V (JST) PAP-02V-S (JST)

Output lead wire AWG22 140mm AWG22 140mm

Allowable desorption number of times AC2200V, 1min. (Between outer case and output) AC2200V, 1min. (Between outer case and output)

Withstanding Voltage About100 times About100 times

Insulation Resistance 100MOver (DC500V) 100MOver (DC500V)

Flame retardant grade UL 94 V-0 UL 94 V-0

Output voltage Vo

Current transformer Load resistance RL

Constant current

source

Ambient temperature: 25℃

Through current Ii

0.1 1 10 1000100

0.1

10000

1000

100

Through current Ii(Arms)

Output voltage Vo(mVrms)

RL=1kΩ

RL=100Ω

RL=10Ω

SENSORS

(8/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series

CCT323047 Type

SHAPE & DIMENSIONS

CIRCUIT DIAGR AM

-00 Output connector

Pin contact: SYM-001T-P0.6 (JST)

Receptacle housing: SMR-02V-B (JST)

-02 Output connector

Pin contact: SPAL-001T-P0.5 (JST)

Receptacle housing: PALR-02VF (JST)

* The connector specification differs depending on the last digit number.

31.5±0.5

35.0max.

29.5±0.5

47.5max.150±15

18.8±0.5

32.5max.

K→L

ø16+1

–0.5

Dimensions in mm

Black:ℓWhite:k

Lℓ

(Primary side) (Second side)

SENSORS

(9/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series CCT323047 Type

SPECIFICATION

ELECTRICAL CHARACTERISTICS

MEASURING DIAGRAM

OUTPUT VOLTAGE CHARACTERISTIC

Part No. CCT323047-100-16-00 CCT323047-100-16-02

Applied cu rrent AC 0.1 to 100Arms (50/60Hz) AC 0.1 to 100Arms (50/60Hz)

Maximum allowed current AC 200Arms continuous AC 200Arms continuous

Internal clamp section diameter 16mm 16mm

Nominal current transformation ratio 3000:1 3000:1

Output current accuracy 33.3mA±1% (100A, 50/60Hz) 33.3mA±1% (100A, 50/60Hz)

Phase difference 1.2°±0.8° (10,100A, 50/60Hz) 1.2°±0.8° (10,100A, 50/60Hz)

Secondary winding resistance 285285

Open-circuit protection 7.5V Clamp element 7.5V Clamp ele ment

Output

connector Pin contact SYM-001T-P0.6 (JST) SPAL-001T-P0.5 (JST)

Receptacle housing SMR-02V-B (JST) PALR-02VF (JST)

Adaptation

connector Socket contact SHF-001T-0.8BS (JST) SPHD-001T-P0.5 (JST)

Plug housing SMP-02V (JST) PAP-02V-S (JST)

Output lead wire AWG22 150mm AWG22 150mm

Allowable desorption number of times About100 times About100 times

Withstanding Voltage AC2200V , 1min. (Between outer case and output）AC2200V , 1min. (Between outer case and output）

Insulation Resistance 100MOver (DC500V) 100MOver (DC500V)

Flame retardant grade UL 94 V-0 UL 94 V-0

Output voltage Vo

Current transformer Load resistance RL

Constant current

source

Ambient temperature: 25℃

Through current Ii

0.1 1 10 100

0.1

10000

1000

100

Through current Ii(Arms)

Output voltage Vo(mVrms)

RL=1kΩ

RL=100Ω

RL=10Ω

SENSORS

(10/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series

CCT272440 Type

SHAPE & DIMENSIONS

CIRCUIT DIAGR AM

Dimensions in mm

-00 Output connector

Pin contact: SYM-001T-P0.6 (JST)

Receptacle housing: SMR-02V-B (JST)

-02 Output connector

Pin contact: SPAL-001T-P0.5 (JST)

Receptacle housing: PALR-02VF (JST)

* The connector specification differs depending on the last digit number.

26.5±0.5

30.5max.

23.5±0.5

41.5max.155±15

13.6±0.5

27.5max.

K→L

ø10

–0.5

Black:ℓWhite:k

Lℓ

(Primary side) (Second side)

SENSORS

(11/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series CCT272440 Type

SPECIFICATION

ELECTRICAL CHARACTERISTICS

MEASURING DIAGRAM

OUTPUT VOLTAGE CHARACTERISTIC

Part No. CCT272440-80-10-00 CCT272440-80-10-02

Applied cu rrent AC 0.1 to 80Arms (50/60Hz) AC 0.1 to 80Arms (50/60Hz)

Maximum allowed current AC 120Arms continuous AC 120Arms cont inuous

Internal clamp section diameter 10mm 10mm

Nominal current transformation ratio 3000:1 3000:1

Output current accuracy 26.6mA±1% (80A, 50/60Hz) 26.6mA±1% (80A, 50/60H z )

Phase difference 1.7°±1.0° (10, 80A, 50 /60Hz) 1.7°±1.0° (10, 80A, 50/60Hz)

Secondary winding resistance 352352

Open-circuit protection 7.5V Clamp element 7.5V Clamp ele ment

Output

connector Pin contact SYM-001T-P0.6 (JST) SPAL-001T-P0.5 (JST)

Receptacle housing SMR-02V-B (JST) PALR-02VF (JST)

Adaptation

connector Socket contact SHF-001T-0.8BS (JST) SPHD-001T-P0.5 (JST)

Plug housing SMP-02V (JST) PAP-02V-S (JST)

Output lead wire AWG22 155mm AWG22 155mm

Allowable desorption number of times About100 times About100 times

Withstanding Voltage AC2200V, 1min. (Between outer case and outpu t) AC2200V, 1min. (Bet ween outer case and output)

Insulation Resistance 100MOver (DC500V) 100MOver (DC500V)

Flame retardant grade UL 94 V-0 UL 94 V-0

Output voltage Vo

Current transformer Load resistance RL

Constant current

source

Ambient temperature: 25℃

Through current Ii

0.1 1 10 100

0.1

10000

1000

100

Through current Ii(Arms)

Output voltage Vo(mVrms)

RL=1kΩ

RL=100Ω

RL=10Ω

SENSORS

(12/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series

CCT261631 Type

SHAPE & DIMENSIONS

CIRCUIT DIAGR AM

Black:ℓWhite:k

-00 Output connector

Pin contact: SYM-001T-P0.6 (JST)

Receptacle housing: SMR-02V-B (JST)

-02 Output connector

Pin contact: SPAL-001T-P0.5 (JST)

Receptacle housing: PALR-02VF (JST)

* The connector specification differs depending on the last digit number.

26.0±0.5

28.6max.

15.8±0.5

32.0max.160±15

13.0±0.5

18.5max.

K→L

ø6+0.5

–0.3

Dimensions in mm

Lℓ

(Primary side) (Second side)

SENSORS

(13/13)

20160916 / sensor_current_cct_en.fm

Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.

Please note that the contents may change without any prior notice due to reasons such as upgrading.

CCT series CCT261631 Type

SPECIFICATION

ELECTRICAL CHARACTERISTICS

MEASURING DIAGRAM

OUTPUT VOLTAGE CHARACTERISTIC

Part No. CCT261631-30-06-00 CCT261631-30-06-02

Applied cu rrent AC 0.1 to 30Arms (50/60Hz) AC 0.1 to 30Arms (50/60Hz)

Maximum allowed current AC 50Arms continuous AC 50 Arms continuous

Internal clamp section diameter 6mm 6mm

Nominal current transformation ratio 3000:1 3000:1

Output current accuracy 10mA±1% (30A, 50/60Hz) 10mA±1% (30A, 50/60Hz)

Phase difference 3.0°±1.5° (10,30A, 50/60Hz) 3.0°±1.5° (10,30A, 50/60Hz)

Secondary winding resistance 492492

Open-circuit protection 7.5V Clamp element 7.5V Clamp ele ment

Output

connector Pin contact SYM-001T-P0.6 (JST) SPAL-001T-P0.5 (JST)

Receptacle housing SMR-02V-B (JST) PALR-02VF (JST)

Adaptation

connector Socket contact SHF-001T-0.8BS (JST) SPHD-001T-P0.5 (JST)

Plug housing SMP-02V (JST) PAP-02V-S (JST)

Output lead wire AWG22 160mm AWG22 160mm

Allowable desorption number of times About100 times About100 times

Withstanding Voltage AC2200V , 1min. (Between outer case and output）AC2200V , 1min. (Between outer case and output）

Insulation Resistance 100MOver (DC500V) 100MOver (DC500V)

Flame retardant grade UL 94 V-0 UL 94 V-0

Output voltage Vo

Current transformer Load resistance RL

Constant current

source

Ambient temperature: 25℃

Through current Ii

0.1 1 10 100

0.1

10000

1000

100

Through current Ii(Arms)

Output voltage Vo(mVrms)

RL=1kΩ

RL=100Ω

RL=10Ω