APHB1608ZGKSURKC 1.6 x 0.8 x 0.5 mm Bi-Color Surface Mount LED DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with InGaN on Sapphire Light Emitting Diode The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 1.6 x 0.8 mm SMD LED, 0.5 mm thickness Compatible with reflow soldering Available in various color combination Package: 2000 pcs / reel Moisture sensitivity level: 3 Tinned pads for improved solderability RoHS compliant APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : 0.1) ATTENTION Observe precautions for handling electrostatic discharge sensitive devices Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.15(0.006") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number Emitting Color (Material) Iv (mcd) @ 20mA [2] Green (InGaN) APHB1608ZGKSURKC Viewing Angle [1] Lens Type Min. Typ. 200 350 *200 *350 120 250 *40 *90 130 Water Clear Hyper Red (AlGaInP) 21/2 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. * Luminous intensity value is traceable to CIE127-2007 standards. (c) 2019 Kingbright. All Rights Reserved. Spec No: DSAM9277 / 1203013494 Rev No: V.4A Date: 04/10/2019 Page 1 / 4 APHB1608ZGKSURKC ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25C Parameter Symbol Emitting Color peak Value Unit Typ. Max. Green Hyper Red 515 645 - nm dom [1] Green Hyper Red 525 630 - nm Spectral Bandwidth at 50% REL MAX IF = 20mA Green Hyper Red 35 28 - nm Capacitance C Green Hyper Red 45 35 - pF Forward Voltage IF = 20mA VF [2] Green Hyper Red 3.3 1.95 4.1 2.5 V Reverse Current (VR = 5V) IR Green Hyper Red - 50 10 A Temperature Coefficient of peak IF = 20mA, -10C T 85C TCpeak Green Hyper Red 0.05 0.14 - nm/C Temperature Coefficient of dom IF = 20mA, -10C T 85C TCdom Green Hyper Red 0.03 0.05 - nm/C Temperature Coefficient of VF IF = 20mA, -10C T 85C TCV Green Hyper Red -3 -1.9 - mV/C Wavelength at Peak Emission IF = 20mA Dominant Wavelength IF = 20mA Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25C Parameter Symbol Value Green Hyper Red Unit Power Dissipation PD 102.5 75 mW Reverse Voltage VR 5 5 V Junction Temperature Tj 115 115 C Operating Temperature Top -40 to +85 C Storage Temperature Tstg -40 to +85 C DC Forward Current IF 25 30 mA IFM [1] 150 185 mA Electrostatic Discharge Threshold (HBM) - 450 3000 V Thermal Resistance (Junction / Ambient) Rth JA [2] 475 530 C/W Thermal Resistance (Junction / Solder point) Rth JS [2] 340 440 C/W Peak Forward Current Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. Rt h JA ,Rt h JS Results from mounting on PC board FR4 (pad size 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity - Ref JEDEC/JESD625-A and JEDEC/J-STD-033. (c) 2019 Kingbright. All Rights Reserved. Spec No: DSAM9277 / 1203013494 Rev No: V.4A Date: 04/10/2019 Page 2 / 4 APHB1608ZGKSURKC TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Green Red Relative Intensity (a. u.) 100% Ta = 25 C 80% Ta = 25 C 0 -15 15 30 -30 45 -45 60% 40% 60 -60 20% 75 -75 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90 1.0 0.5 0.0 90 1.0 0.5 GREEN Luminous Intensity vs. Forward Current Forward current (mA) Ta = 25 C 40 30 20 10 0 2.0 2.5 3.0 3.5 4.0 Forward voltage (V) 2.5 Permissible forward current (mA) Luminous intensity normalised at 20 mA 50 Ta = 25 C 2.0 1.5 1.0 0.5 0.0 4.5 0 10 20 30 40 Forward current (mA) Luminous Intensity vs. Ambient Temperature Forward Current Derating Curve 50 Luminous intensity normalised at Ta = 25 C Forward Current vs. Forward Voltage 40 30 20 10 0 50 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) -40 -20 0 20 40 60 80 100 Ambient temperature (C) HYPER RED Luminous Intensity vs. Forward Current Forward current (mA) Ta = 25 C 40 30 20 10 0 1.5 1.7 1.9 2.1 2.3 Forward voltage (V) 2.5 2.5 Permissible forward current (mA) Luminous intensity normalised at 20 mA 50 Ta = 25 C 2.0 1.5 1.0 0.5 0.0 0 10 20 30 40 Forward current (mA) Luminous Intensity vs. Ambient Temperature Forward Current Derating Curve 50 (c) 2019 Kingbright. All Rights Reserved. Spec No: DSAM9277 / 1203013494 Rev No: V.4A Date: 04/10/2019 50 Luminous intensity normalised at Ta = 25 C Forward Current vs. Forward Voltage 40 30 20 10 0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) 2.5 2.0 1.5 1.0 0.5 0.0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) Page 3 / 4 APHB1608ZGKSURKC REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. PACKING & LABEL SPECIFICATIONS PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes (c) 2019 Kingbright. All Rights Reserved. Spec No: DSAM9277 / 1203013494 Rev No: V.4A Date: 04/10/2019 Page 4 / 4