1 05/12/12
DESCRIPTION
The ICPL2630 and ICPL2631 dual channel devices
each consists of an infrared emitting diode, optically
coupled to a high speed integrated photo detector logic
gate with a strobable output.
FEATURES
• High speed 10Mbit/s
• 10kV/μs min. Common Mode Transient Immunity
(ICPL2631)
• High AC Isolation voltage 5000Vrms
• Guaranteed performance from -40°C to 85°C
• Wide Operating temperature range -
55°C to 125°C
• Logic Gate Output
• RoHS Compliant
• Safety Approvals Pending
APPLICATIONS
• Line Receivers, Data Transmission
• Ground Loop Elimination
• LSTTL to TTL, LSTTL or 5V CMOS
• Data Multiplexing
• Switch Mode Power Supplies
• Pulse Transformer Replacement
• Computer Peripheral Interface
ORDER INFORMATION
• Add G after PN for 10mm lead spacing
• Add SM after PN for Surface Mount,
• Add SMT&R after PN for Surface Mount
Tape & Reel
.
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
ISOCOM COMPONENTS 2004 LTD
Unit 25B, Park View Road West, Park View Industrial Estate
Hartlepool, Cleveland, TS25 1UD, United Kingdom
Tel: +44 (0)1429 863 609 Fax : +44 (0)1429 863 581
e-mail: sales@isocom.co.uk
http://www.isocom.com
ISOCOM COMPONENTS ASIA LTD
Hong Kong Office,
Block A, 8/F, Wah Hing Industrial mansion,
36 Tai Yau Street, San Po Kong, Kowloon, Hong Kong.
Tel: +852 2995 9217 Fax : +852 8161 6292
e-mail: sales@isocom.com.hk
ABSOLUTE MAXIMUM RATINGS
Input Diode
Forward Current (each Channel) 20mA
Reverse Voltage 5V
Power dissipation (each Channel) 40mW
Output
Output Current (each Channel) 50mA
Output Voltage 7V
Supply Voltage 7V
Power Dissipation 85mW
Total Package
Isolation Voltage 5000Vrms
Operating Temperature -40 to 100 °C
Storage Temperature -55 to 125 °C
Power Dissipation 85mW
Lead Soldering Temperature (10s) 260°C
DC93164
1. Anode
2. Cathode
3. Cathode
4. Anode
5. Gnd
6. Vout2
7. Vout1
8. VCC
2 05/12/12
Truth Table (Positive Logic)
ELECTRICAL CHARACTERISTICS
INPUT (TA = -40°C to 85°C unless otherwise specified)
OUTPUT (TA = -40°C to 85°C unless otherwise specified)
COUPLED (TA = -40°C to 85°C unless otherwise specified)
Input Output
H L
L H
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
DC93164
Parameter Symbol Test Condition Min Typ. Max Unit
Forward Voltage VF IF = 10mA, TA = 25°C 1.4 1.8 V
Reverse Voltage VR I
R = 10µA 5.0 V
Temperature
Coefficient
ΔVF/ΔTA I
F = 10mA -1.8 mV/°C
Input Capacitance CIN V
F = 0V, f = 1MHz 60 pF
Parameter Symbol Test Condition Min Typ. Max Unit
High Level Supply
Current
ICCH I
F = 0mA, VCC = 5.5V 12.5 18 mA
Low Level Supply
Current
ICCL I
F = 10mA, VCC = 5.5V 14.5 21 mA
Parameter Symbol Test Condition Min Typ. Max Unit
High Level Output
Current
IOH V
CC = 5.5V, VO = 5.5V,
IF = 250μA
2.1 100 μA
Low Level Output
Voltage
VOL V
CC = 5.5V, IF = 5mA,
ICL = 13mA
0.35 0.6 V
Input Threshold
Current
IFT V
CC = 5.5V, VO = 0.6V,
IOL = 13mA
2.5 5 mA
3 05/12/12
ELECTRICAL CHARACTERISTICS
Switching Characteristics (TA = -40°C to 85°C, VCC = 5V, IF = 7.5mA unless otherwise specified)
Notes :
1. The VCC supply must be bypassed by a 0.1μF capacitor or larger with good high frequency characteristic and
should be connected as close as possible to the package VCC and Gnd pins.
2. tPLH– Propagation delay is measured from the 3.75mA level on the HIGH to LOW transition of the input current
pulse to the 1.5 V level on the LOW to HIGH transition of the output voltage pulse.
3. tPHL– Propagation delay is measured from the 3.75mA level on the LOW to HIGH transition of the input current
pulse to the 1.5 V level on the HIGH to LOW transition of the output voltage pulse.
4. tr– Rise time is measured from the 10% to the 90% levels on the LOW to HIGH transition of the output pulse.
5. tf– Fall time is measured from the 90% to the 10% levels on the HIGH to LOW transition of the output pulse.
6. CMH– The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the
HIGH state (i.e., VOUT > 2.0V).
7. CML– The maximum tolerable rate of rise of the common mode voltage to ensure the output will remain in the
LOW output state (i.e., VOUT < 0.8V).
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
DC93164
Parameter Symbol Test Conditi on Min Typ. Max Unit
Propagation Delay
Time to Output High
Level
tPLH CL = 15pF, RL = 350Ω,
TA = 25°C
35 100
ns
Propagation Delay
Time to Output Low
Level
tPHL CL = 15pF, RL = 350Ω,
TA = 25°C
40
100
ns
Pulse Width
Distortion
|tPHL - tPLH | CL = 15pF, RL = 350Ω 5
35
ns
Output Rise Time tr CL = 15pF, RL = 350Ω 40 ns
Output Fall time tf CL = 15pF, RL = 350Ω 10 ns
Common Mode
Transient Immunity at
Logic High
CMH ICPL2630
ICPL2631
IF = 0mA, VCM = 1kVp-p,
VOH = 2.0V, RL = 350Ω,
TA = 25°C
5000
10000
20000
V/μs
Common Mode
Transient Immunity at
Logic Low
CML ICPL2630
ICPL2631
IF = 7.5mA, VCM = 1kVp-p,
VOL = 0.8V, RL = 350Ω,
TA = 25°C
5000
10000
20000
V/μs
4 05/12/12
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
DC93164
Fig 1 Forward Current vs Forward Voltage Fig 2 Output Voltage vs Input Current
Fig 3 Low Level Output Voltage vs TA Fig 4 Low Level Output Current vs TA
Fig 5 Input Threshold Current vs TA Fig 6 High Level Output Current vs TA
5 05/12/12
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
DC93164
Fig 7 Propagation Del a y vs Forward Current Fig 8 Propagation Delay vs TA
Fig 9 Pulse Width Distor t i on vs TA Fig 10 Rise Time and Fall Time vs TA
6 05/12/12
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
DC93164
Fig 11 Switching Time Test Circuit
Fig 12 Common Mode Transient Immunity Test Circuit
10%
90%
Output
(Vo)
Output
(Vo)
Input
IF=7.5mA
IF=3.75mA
1.5V
tr tf
tPLH
tPHL
IF=7.5mA
IF=0mA
CML
CMH
VO(Min)
VO(Max)
Peak
VCM
0V
5V
Vo
Vo
0.5V
7 05/12/12
ORDER INFORMATION
ICPL2630, ICPL2631
After PN Description Packing quantity
None Standard DIP8 50 pcs per tube
G 10mm Lead Spacing 50 pcs per tube
SM Surface Mount 50 pcs per tube
SMT&R Surface Mount Tape & Reel 1000 pcs per reel
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
DC93164
8 05/12/12
PACKAGE DIMENSIONS (mm)
DIP
G FORM
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
DC93164
9 05/12/12
SMD
REFLOW SOLDERING TEMPERATURE PROFILE
ICPL2630 / ICPL2631
ISOCOM
COMPONENTS
DC93164
TIME (s)
150°C
1-3 °C/s Max
60s – 100s
200°C
217°C >255 °C (30s Max)
60s – 120 s
260 °C (peak,10s Max)
TEMP (°C)
1-3 °C/s Max
