T-1 (3mm) BI-LEVEL LED INDICATOR Part Number: L-93A8AFQ/2ID-RV High Efficiency Red Features Description z Pre-trimmed leads for pc mounting. The High Efficiency Red source color devices are made with z Black case enhances contrast ratio. Gallium Arsenide Phosphide on Gallium Phosphide Orange z High reliability life measured in years. Light Emitting Diode. z Housing UL rating:94V-0. z Housing material: type 66 nylon. z RoHS compliant. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SPEC NO: DSAC6304 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/18/2011 DRAWN: D.M.Su PAGE: 1 OF 5 Selection Guide Part No. Dice L-93A8AFQ/2ID-RV Lens Type High Efficiency Red (GaAsP/GaP) Red Diffused Iv (mcd) [2] @ 10mA Viewing Angle [1] Min. Typ. 12 25 *6 *12 21/2 60 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. *Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device Typ. peak Peak Wavelength High Efficiency Red 627 D [1] Dominant Wavelength High Efficiency Red 625 1/2 Spectral Line Half-width High Efficiency Red C Capacitance VF [2] IR Max. Units Test Conditions *627 nm IF=20mA *617 nm IF=20mA 45 nm IF=20mA High Efficiency Red 15 pF VF=0V;f=1MHz Forward Voltage High Efficiency Red 2 2.5 V IF=20mA Reverse Current High Efficiency Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. *Wavelength value is traceable to the CIE127-2007 compliant national standards. Absolute Maximum Ratings at TA=25C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Lead Solder Temperature [2] 260C For 3 Seconds Lead Solder Temperature [3] 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAC6304 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/18/2011 DRAWN: D.M.Su PAGE: 2 OF 5 High Efficiency Red L-93A8AFQ/2ID-RV SPEC NO: DSAC6304 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/18/2011 DRAWN: D.M.Su PAGE: 3 OF 5 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAC6304 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu L-93A8AFQ/2ID-RV DATE: DEC/18/2011 DRAWN: D.M.Su PAGE: 4 OF 5 SPEC NO: DSAC6304 REV NO: V.4A APPROVED: WYNEC CHECKED: Allen Liu DATE: DEC/18/2011 DRAWN: D.M.Su PAGE: 5 OF 5