Bulletin I20108 rev. B 06/02 95PF(R)...(W) SERIES STANDARD RECOVERY DIODES GEN II DO5 Stud Version Features High surge current capability Designed for a wide range of applications 95 A Stud cathode and stud anode version Leaded version available/ wire version available Low thermal resistance UL approval pending Typical Applications 95PF(R)... Battery charges Converters Power supplies Machine tool controls Welding Major Ratings and Characteristics 95PF (R)...(W) Parameters IF(AV) A 140 C 149 A @ 50Hz 2000 A @ 60Hz 2090 @ 50Hz 20000 @ 60Hz 18180 IF(RMS) I2t Units 95 @ TC IFSM 40 to 120 95PF(R)...W A2s VRRM range 400 to 1200 V TJ range - 55 to 180 C www.irf.com case style DO-203AB (DO-5) case style DO-203AB (DO-5) 1 95PF(R)...(W) Series Bulletin I20208 rev. B 06/02 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage VRRM, maximum VRSM, maximum non- IRRM max. Code repetitive peak reverse voltage V repetitive peak reverse voltage V @ TJ = 150C 40 400 500 Type number 95PF (R)...(W) 80 800 960 120 1200 1440 mA 9 Forward Conduction Parameter I F(AV) Max. average forward current @ Case temperature 95PF(R)...(W) 40 to 120 Units Conditions 95 140 A C I F(RMS) Max. RMS forward current 149 A I FSM Max. peak, one-cycle forward, 2000 t = 10ms non-repetitive surge current 2090 t = 8.3 ms 1680 I 2t Maximum I2t for fusing A V F(TO) Low level value of threshold voltage 2 rf Low level value of forward V FM Max. forward voltage drop slope resistance reapplied 100% VRRM 1760 t = 8.3 ms reapplied t = 10ms No voltage 18180 t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied A2s 12800 Maximum I2t for fusing t = 10ms No voltage 20000 14100 I 2 t 180 conduction, half sine wave Sinusoidal half wave, Initial TJ = 150C 200000 A2s 0.73 V (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. 2.4 m (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. 1.40 V t = 0.1 to 10ms, no voltage reapplied Ipk= 267A, TJ = 25C, tp = 400s rectangular wave www.irf.com 95PF(R)...(W) Series Bulletin I20208 rev. B 06/02 Thermal and Mechanical Specifications 95PF (R)...(W) 40 to 120 Parameter TJ Max. junction operating temperature range -55 to 180 Tstg Max. storage temperature range -55 to 180 RthJC Max. thermal resistance, junction to case RthCS Max. thermal resistance, case to heatsink T Max. allowed mounting torque 10% wt Units Conditions C 0.27 DC operation K/W 0.25 Approximate weight Case style 2.3 / 3.4 Nm 20 / 30 lbf * in 3.2 / 4.3 Nm 28 / 38 lbf * in 15.8 (0.56) g (oz) Mounting surface, smooth, flat and greased Tighting on nut (1) Tighting on Hexagon (2) DO-203AB (DO5) See Outline Table (1) As general recommendation we suggest to tight on Hexagon and not on nut (2) Torque must be appliable only to Hexagon and not to plastic structure RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Sinusoidal conduction Rectangular conduction 180 0.14 0.10 120 0.16 0.17 90 0.21 0.22 60 0.30 0.31 30 0.50 0.50 180 95PF(R) Serie RthJC = 0.27 K/W 170 160 Conduction Angle 150 180 140 120 90 60 130 30 120 0 20 40 60 80 100 Units Conditions TJ = TJ max. K/W Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) Conduction angle 180 95PF(R) Series RthJC (DC) = 0.27 K/W 170 160 Conduction Period 150 30 140 60 90 130 120 180 DC 120 0 40 80 120 160 Average Forward Current (A) Average Forward Current (A) Fig. 1 - Current Ratings Characteristics Fig. 2 - Current Ratings Characteristics www.irf.com 3 95PF(R)...(W) Series 160 0.3 5 W K/W K/ K/ W 80 7 100 60 30 0. 120 180 120 90 140 0. Maximum Allowable Forward Power Loss (W) Bulletin I20208 rev. B 06/02 1K /W 1.5 K/W 2K RMS Limit 60 /W 3 K/ W 40 Conduction Angle 5 K/W 95PF(R) Series Tj = 180C 20 0 0 20 40 60 0 100 80 Average Forward Current (A) 30 60 90 120 150 180 Maximum Allowable Ambient Temperature (C) 160 K/ K/ W 7 W 100 0.3 5 0. 90 60 30 120 DC 1K /W 1.5 80 RMS Limit K/W 180 120 140 0. Maximum Allowable Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics K/W 2K 60 Conduction Period 40 /W 3 K/ W 5 K/W 95PF(R) Series Tj = 180C 20 0 0 30 60 90 120 Average Forward Current (A) 0 150 30 60 90 120 150 180 Maximum Allowable Ambient Temperature (C) Fig. 4 - Forward Power Loss Characteristics 4 www.irf.com 95PF(R)...(W) Series 1800 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 150C @ 60 Hz 0.0083 s 1600 1400 @ 50 Hz 0.0100 s 1200 1000 800 600 95PF(R) Series 400 1 10 Peak Haf Sine Wave Forward Current (A) Peak Haf Sine Wave Forward Current (A) Bulletin I20208 rev. B 06/02 100 2200 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial Tj = 150C 1800 No Voltage Reapplied 1600 Rated Vrrm Reapplied 2000 1400 1200 1000 800 600 200 0.01 Fig. 5 - Maximum Non -Repetitive Surge Current 100 10 Tj = 25C 95PF(R) Series 1 0 0.5 1 1.5 2 2.5 3 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics www.irf.com 1 Fig. 6 - Maximum Non -Repetitive Surge Current Transient Thermal Impedance Z thJC (K/W) Instantaneous Forward Current (A) Tj = 180C 0.1 Pulse Train Duration (s) Number Of Equal Amplitude Half Cycle Current Pulses (N) 1000 95PF(R) Series 400 1 Steady State Value RthJC = 0.27 K/W (DC Operation) 0.1 95PF(R) Series 0.01 0.0001 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics 5 95PF(R)...(W) Series Bulletin I20208 rev. B 06/02 Outline Table Fig. A - 95PF (R)... Case Style DO-203AB (DO-5) Note: For Metric device please contact Factory Fig. C - 97PF (R)... Case Style DO-203AB (DO-5) Note: For Metric device please contact Factory Fig. B - 95PF (R)...(W) Case Style DO-203AB (DO-5) Note: For Metric device please contact Factory 6 www.irf.com 95PF(R)...(W) Series Bulletin I20208 rev. B 06/02 Ordering Information Table Device Code 1 - 95 97 95 PF R 120 W 1 2 3 4 5 = Standard device = Isolated lead on standard terminal with silicone sleeve available for 1200V only (Red = Reverse Polarity) (Blue = Normal Polarity) 2 3 - PF = Plastic Package - None = Stud Normal Polarity (Cathode to Stud) 4 - Voltage code: Code x 10 = VRRM (See Voltage Ratings table) 5 - None = Standard terminal (see Fig. A) - W = Wire terminal (see Fig. B) R = Stud Reverse Polarity (Anode to Stud) Data and specifications subject to change without notice. This product has been designed and qualified for Multiple Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 06/02 www.irf.com 7