Contents 1. High Power DC-DC Converter Products ........................................................................................... 3 1.1 DC-DC Product Selection Guide ..................................................................................................... 4 1.2 ACT2801 5V/1.2A Smart Power Bank ............................................................................................ 5 1.3 ACT2801C 5V/1.35A Smart Power Bank ....................................................................................... 7 1.4 ACT2802 5V/2.1A Smart Power Bank ............................................................................................ 9 1.5 ACT2802C 5V/2.35A Smart Power Bank ..................................................................................... 11 1.6 ACT2802+ACT6391 5V/2.1A+1A Smart Power Bank ................................................................. 13 1.7 ACT4501 5V/1.0A Smart Phone Car Charger ............................................................................. 15 1.8 ACT4523 5V/2.1A iPad Car Charger ............................................................................................ 17 1.9 ACT4523A 5V/2.4A iPad Car Charger ......................................................................................... 19 1.10 ACT4533A 5V/2.4A iPad Car Charger ....................................................................................... 21 1.11 ACT4533B 5V/3.4A iPad Car Charger ........................................................................................ 23 1.12 ACT4503 5V/3.4A Dual-Output Car Charger ............................................................................ 25 1.13 ACT4455 5V/4.2A Dual-Output Car Charger ............................................................................ 27 1.14 ACT111A 12VDC or AC Input, 3x350mA LEDs .......................................................................... 29 2. Low Power DC-DC Converter Products ........................................................................................... 31 2.1 Low Power Step-Down DC-DC Converters ................................................................................. 32 2.2 Multi-Function Step-Down DC-DC Converters .......................................................................... 32 2.3 Step-Up DC-DC Converters .......................................................................................................... 32 2.4 ActivePathTM Battery Chargers .................................................................................................... 32 3. Green Power AC-DC Converter Products ....................................................................................... 33 3.1 AC-DC Product Selection Guide .................................................................................................. 34 Primary Side Regulation (PSR) PWM Controllers--ActivePSRTM 3.2 ACT334 5V/1A Universal Charger For DOE Standard .............................................................. 35 3.3 ACT411 12V/1A Universal Adaptor Low Cost ........................................................................... 37 3.4 ACT412 12V/0.4A Shaver Charger Low Cost ............................................................................. 39 3.5 ACT413 5V/2.4A Universal Adaptor Low Cost .......................................................................... 41 Secondary Side Regulation PWM Controllers--ActiveQRTM 3.6 ACT510 5V/2A Universal Adaptor .............................................................................................. 43 3.7 ACT512 5V/3A Universal Adaptor Low Profile .......................................................................... 45 3.8 ACT512 12V/1A Universal Adaptor For DOE Standard ............................................................ 47 3.9 ACT512E 12V/1.5A Universal Adaptor For DOE Standard ....................................................... 49 3.10 ACT512E 12V/2A Universal Adaptor For DOE Standard ........................................................ 51 3.11 ACT512 15V/3A Universal Adaptor For DOE Standard .......................................................... 53 3.13 ACT518SH 5V/1.5A Universal Adaptor For DOE Standard .................................................... 55 4. Power Management Units (PMU/PMICs) ...................................................................................... 57 4.1 PMU Product Selection Guide .................................................................................................... 58 4.2 ACT8931A ...................................................................................................................................... 60 4.3 ACT8846/ACT8847/ACT8849 ...................................................................................................... 60 4.4 ACT8865 ......................................................................................................................................... 61 4.5 ACT8945A ....................................................................................................................................... 61 4.6 Rockchip RK2918/RK2926/RK2928/RK3026/RK3028 Solutions ............................................. 62 4.7 Atmel SAMA5 Cortex-A5 and SAM9 Solutions ......................................................................... 62 For more parts, visit: www.active-semi.com High Power DC-DC Converter Products 3 DC-DC Product Selection Guide Applications Car Chargers for Smart Phones, iPad / iPhone / iPod, PND , and tablet PCs Power bank Mobile Power LED Lighting Input Voltage Output Current Feedback Switching (V) (A) Voltage (V) Frequency Part Number Topology Package Applications ACT2801 Buck/Boost 4.5-5.5 1.5 N/A QFN24-44 Power bank, Mobile Power ACT2801C Buck/Boost 4.5-5.5 1.5 N/A QFN24-44 Power bank, Mobile Power and Flashlight Function ACT2802 Buck/Boost 4.5-5.5 2.5 N/A QFN24-44 Power bank, Mobile Power ACT2802C Buck/Boost 4.5-5.5 2.5 N/A QFN24-44 Power bank, Mobile Power and Flashlight Function ACT4501 Async Buck 1.25 0.808 125KHz SOP-8 5V/1A Car Charger ACT4514 Async Buck 10 to 40 1.5 Async Buck 10 to 40 0.808 210kHz SOP-8 5V/1-1.4A Car Charger 3 0.808 225kHz SOP-8EP 5V/1.5-2.1A Car Charger 3.5 0.808 250KHz SOP-8EP 3.5 0.808 125KHz SOP-8EP 3.5 0.808 125KHz SOP-8EP 1.1MHZ /0.55MHz 1.1MHZ /0.55MHz 1.1MHZ /0.55MHz 1.1MHZ /0.55MHz 10 to 30 ACT4523 (40V surge) 10 to 36 ACT4523A Async Buck ACT4533A Async Buck ACT4533B Async Buck (40V surge) 5V/2.4A,5V/3.1A Car Charger 10 to 36 (40V surge) 10 to 36 (40V surge) 5V/2.4A,5V/3.4A 7.5 to 36 ACT4503 Async Buck (40V surge) 5V/2.4A Car Charger Car Charger 5V/2.1A+1.0A 3.5 0.8 200kHz SOP-8EP Car Charger 5V/2.1A+2.1A and 7.5 to 36 ACT4455 Async Buck (40V surge) 5 0.8 200kHz SOP-8EP 5V/2.1A+1.0A Dual-Output Car Charger ACT4065A Async Buck 6.0 to 30 2 0.808 210kHz SOP-8 Networking ACT4070B Async Buck 6.5 to 30 3 0.808 300kHz SOP-8EP Networking ACT4070C Async Buck 6 to 40 3 0.808 300kHz SOP-8EP Networking ACT4088 Async Buck 4.5 to 28 1.5 0.81 1.4MHz SOT23-6 Networking ACT111A Async Buck 4.5 to 30 1.5 0.1 1.4MHZ SOT23-6 LED Lighting, LED Display ACT2102 Sync Buck 4.5 to 18 2 0.923 310kHz SOP-8 ADSL, LCD-TV, Networking ACT2103 Sync Buck 4.5 to 18 3 0.923 310kHz SOP-8EP ADSL, LCD-TV, Networking ACT2113 Sync Buck 4.5 to 18 3 0.923 510kHz SOP-8EP ADSL, LCD-TV, Networking 4 ACT2801 5V/1A Smart Power Bank Input Voltage Output Voltage Charge Current Boost Output Efficiency Topology 4.5-5.5V 5.0V 1A 1.4A 95%@1.0A@VBAT=4.2V Buck/Boost Operation and Application ACT2801 is a space-saving and high-performance lowprofile single-chip solution for backup battery pack and standalone battery charger. ACT2801 integrates all the functions that backup battery packs need, including switching charger, Boost converter and LED indication. L=37.2mm W=15.5mm Design Features Dedicated Single Chip Solution for Mobile Power Programmable up to 5V/2.1A Input Current Programmable up to 5V/1.5A Output Current Programmable up to 1.5A Switching Charge Current Pogrammable 4.1V to 4.35V Battery Voltage Prioritized Power Path from Input to Output 2.2MHz/1.1MHz Switching Frequencies 4LEDs Battery Level and Status Indication <10A Battery Low Battery Leakage Current No Load Shutdown and Push Button Turn-on Battery Impedance Compensation Battery Over Current, Over Voltage, Over Temperature and Short Circuit Protections Charge Current Foldback at 110C Die Temperature IC Over Temperature Protection Schematic ACT2801 operates at 2.2MHz/1.1MHz for switching charger and 1.1MHz/0.55MHz for Boost converter allowing tiny external inductor and capacitors. ACT2801 provides a direct power path from input to output with programmable current limit while providing power to switching charger. Output has higher priority than battery charger if the programmed input current limit is reached. ACT2801 charges battery with full cycle of preconditioning, fast charge with constant current and constant voltage until end of charge. The battery charger is thermally regulated at 110C with charge current foldback. ACT2801 Boost converter steps battery voltage up to 5V. Boost converter features high efficiency, constant current regulation, short circuit protection and over voltage protection. ACT2801 provides 3.5mA constant currents to drive 4 LEDs to indicate battery level and charging status. Battery impedance is compensated at battery level indication. Boost Output V/I Profile Boost CC/CV Curve AGND ICST ILIM CSN + D- VIN CSP D+ - Output USB R3 C3 C8 R15 C2 C6 BAT PGND SW SW VOUT VOUT D2 R14 + D- R4 R1 C12 R10 R5 ACT2801 Input USB Output Voltage (V) BTV IOST D+ - VBAT =3.7V LED2 LED3 LED4 RIMC TH BLVS LED1 PB nPG R13 5.5 LED1 LED2 LED3 C11 LED4 R11 HZ R8 PB R7 R6 R12 VBAT =3.2V 4.5 4.0 C14 VBAT =4.1V D1 Q1 5.0 3.5 R2 L1 C4 R9 3.0 C7 C5 BAT 0 200 400 600 800 1000 1200 1400 Output Current (mA) 5 ACT2801 5V/1A Smart Power Bank Bill of Materials 2) Use copper plane for PGND for best heat dissipation and noise immunity. AGND and PGND are connected under the IC REF Description MFTR L1 SWPA4020S1R0NT 2.2uH 3.4A (4*4*2mm) Sunlord Q1 SSC8013, Rdson=38m at VGS = - 4.5 V SPIRIT D1 D2 SS12,Vf=0.5V, 20V Schottky 1N4148, Vf=0.7V, 75V Schottky Mccsemi Philips C2, C5 C3 Ceramic capacitor, 22uF/10V, X7R, 1206 Ceramic capacitor, 4.7uF/10V, X7R, 0805 Murata/TDK Murata/TDK C4 Ceramic capacitor, 0.1uF/10V, X7R, 0603 Murata/TDK C6 C7 Ceramic capacitor, 10nF/10V, X7R, 0402 Ceramic capacitor, 1nF/10V, X7R, 0603 Murata/TDK Murata/TDK as shown in the layout figure. C8 C11,C12,C14 Ceramic capacitor, 1uF/10V, X7R, 0603 Ceramic capacitor, 2.2uF/10V, X7R, 0603 Murata/TDK Murata/TDK 5) A separate trace is from VBAT input to BAT pin for battery R1 Chip Resistor, 1.5k, 1/16W, 1%, 0402 Murata/TDK voltage sense accuracy. R2 Chip Resistor, 50m, 1/8W, 1%, 1206 Murata/TDK R3 Chip Resistor,100k, 1/16W, 1%, 0402 Murata/TDK R4 Chip Resistor, 39k, 1/16W, 1%, 0402 Murata/TDK R5 R6 Chip Resistor, 25k, 1/16W, 1%, 0402 Chip Resistor, 10k, 1/16W, 1%, 0402 Murata/TDK Murata/TDK R7 R8 Chip Resistor, 60k, 1/16W, 1%, 0402 Chip Resistor, 50k, 1/16W, 1%, 0402 Murata/TDK Murata/TDK R9 Chip Resistor, 1, 1/10W, 5%, 0805 Murata/TDK R10 R11 Chip Resistor, 2.7, 1/8W, 5%, 1206 Chip Resistor, 200k, 1/16W, 5%, 0603 Murata/TDK Murata/TDK R12,R13 R14 Chip Resistor, 715k, 1/16W, 5%, 0603 Chip Resistor, 100k, 1/16W, 5%, 0603 Murata/TDK Murata/TDK LED, 0603, Blue USB 10.2*14.6*7mm, 4P PB Push Button Micro-USB MICRO USB 5P/F SMT B U1 IC, ACT2801 T-QFN 44-24 tion. 4) Use Kevin sense from sense resistor R2 to CSP and CSN pins 6) RC snubber is recommended to add across SW to PGND to reduce EMI noise. 7) A 10V/1A schottky is added from inductor terminal to VOUT to reduce EMI noise. Typical performance characteristics Boost Efficiency 100.0 LED Manu 90.0 ACT PCB Top Layer Efficiency(%) Chip Resistor, 2.2, 1/16W, 5%, 0603 3) SW copper area should be limited due to EMI considera- ACT2801-04 R15 LED1,LED2,LED3,LED4 thermal pad with 4x4 vias matrix. 80.0 Vbat=3.2V Vbat=4.1V Vbat=3.7V 70.0 60.0 50.0 40.0 0 200 400 600 800 1000 1200 1400 Output Current (mA) Radiated EMI Test PCB Bottom Layer PC Board Layout Guidance 1) Arrange the power components to reduce the AC loop size that consists of C2, VOUT, SW and PGND. C2 (1206 size) must be placed close to the IC and across the VOUT and PGND traces and SW trace goes under the C2 . EVALUATION KITS Power Bank ACT2801DMB-#1 VBAT Vo Io 3.0V-4.5V 5V+/-100mV 1000mA 6 ACT2801C 5V/1.35A Smart Power Bank Input Voltage Output Voltage Charge Current Boost Output Efficiency Topology 4.5-5.5V 5.0V 1A 1.35A 95%@1.0A@VBAT=4.2V Buck/Boost Operation and Application ACT2801C is a space-saving and high-performance lowprofile single-chip solution for backup battery pack and standalone battery charger. ACT2801C integrates all the functions that a backup battery pack needs, including switching charger, boost converter and LED indication. L=37.2mm W=15.5mm Design Features Dedicated Single Chip Solution for Mobile Power Programmable up to 5V/1.5A Output Current Programmable up to 1.5A Switching Charge Current Pogrammable 4.1V to 4.35V Battery Voltage Prioritized Power Path from Input to Output 1.1MHz/550KHz Switching Frequencies 4LEDs Battery Level and Status Indication <10A Low Battery Leakage Current No Load Shutdown and Push Button Turn-on Battery Impedance Compensation Battery Over Current, Over Voltage, Over Temperature and Short Circuit Protections Charge Current Foldback at 110C Die Temperature IC Over Temperature Protection Schematic ICST ACT2801C R3 D2 IOST C6 BAT PGND CSP SW VIN SW CSN VOUT ILIM VOUT + D- Output Voltage (V) R5 R4 R1 C11 C12 VBAT =3.7V LED1 BTV nPG Input USB 5.5 LED2 LED3 RIMC LED4 BLVS FLD R11 LED1 LED2 LED3 LED4 R6 HZ AGND R14 C3 C8 C2 R15 USB Output L1 C4 VBAT =3.2V 4.5 4.0 VBAT =4.1V 3.5 Q1 + D- 5.0 C13 D1 D+ - ACT2801C provides 3.5mA constant currents to drive 4 LEDs to indicate battery level and charge status. Battery impedance is compensated for battery level indication. ACT2801C has an Open-drain Flashlight driver. A internal switch can handle up to 50mA. Boost CC/CV Curve PB D+ - ACT2801C boost converter steps battery voltage up to 5V. Boost converter features high efficiency, constant current regulation, short circuit protection and over voltage protection. R8 R7 LED PB R10 ACT2801C charges battery with full cycle of preconditioning, fast charge with constant current and constant voltage until end of charge. The battery charger is thermally regulated at 110C with charge current foldback. Boost Output V/I Profile R12 R13 ACT2801C operates at 1.1MHz for switching charger and 0.55MHz for boost converter allowing tiny external inductor and capacitors.ACT2801C provides a direct power path from input to output with programmable current limit while providing power to switching charger. Output has higher priority than battery charger if the programmed input current limit is reached. R9 C7 R2 3.0 C5 BAT 0 200 400 600 800 1000 1200 1400 Output Current (mA) 7 ACT2801C 5V/1.35A Smart Power Bank Bill of Materials 2) Use copper plane for PGND for best heat dissipation and MFTR L1 Q1 D1 D2 C2, C5 C3 C4 C6 C7 C8 C11,C12,C13 R1 R2 R3 SWPA4020S1R0NT 2.2uH 3.4A (4*4*2mm) SSC8013, Rdson=38m at VGS = - 4.5 V SS12,Vf=0.5V, 20V Schottky 1N4148, Vf=0.7V, 75V Schottky Ceramic capacitor, 22uF/10V, X7R, 1206 Ceramic capacitor, 4.7uF/10V, X7R, 0805 Ceramic capacitor, 0.1uF/10V, X7R, 0603 Ceramic capacitor, 10nF/10V, X7R, 0402 Ceramic capacitor, 1nF/10V, X7R, 0603 Ceramic capacitor, 1uF/10V, X7R, 0603 Ceramic capacitor, 2.2uF/10V, X7R, 0603 Chip Resistor, 1.2k, 1/16W, 1%, 0402 Chip Resistor, 50m, 1/8W, 1%, 1206 Chip Resistor,101.3k, 1/16W, 1%, 0402 Sunlord SPIRIT Mccsemi Philips Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK R4 R5 R6 R7 Chip Resistor, 60.4k, 1/16W, 1%, 0402 Chip Resistor, 25k, 1/16W, 1%, 0402 Chip Resistor, 51, 1/16W, 1%, 0402 Chip Resistor, 60k, 1/16W, 1%, 0402 Murata/TDK Murata/TDK Murata/TDK Murata/TDK R8 R9 R10 R11 R12,R13 R14 R15 LED1,LED2,LED3,LED4 LED Chip Resistor, 100k, 1/16W, 1%, 0402 Chip Resistor, 1, 1/10W, 5%, 0805 Chip Resistor, 2.7, 1/8W, 5%, 1206 Chip Resistor, 200k, 1/16W, 5%, 0603 Chip Resistor, 715k, 1/16W, 5%, 0603 Chip Resistor, 100k, 1/16W, 5%, 0603 Chip Resistor, 2.2, 1/16W, 5%, 0603 LED, 0603, Blue FLASHLIGHT, WHITE Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK LED Manu LED Manu USB 10.2*14.6*7mm, 4P PB Micro-USB U1 Push Button MICRO USB 5P/F SMT B IC, ACT2801C QFN 44-24 ACT PCB Top Layer noise immunity. AGND and PGND are connected under the IC thermal pad with 4x4 vias matrix. 3) SW copper area should be limited due to EMI consideration. 4) Use Kevin sense from sense resistor R2 to CSP and CSN pins as shown in the layout figure. 5) A separate trace is from VBAT input to BAT pin for battery voltage sense accuracy. 6) RC snubber is recommended to add across SW to PGND to reduce EMI noise. 7) A 10V/1A schottky is added from inductor terminal to VOUT to reduce EMI noise. Typical performance characteristics Boost Efficiency 100.0 90.0 Efficiency(%) Description ACT2801-04 REF 80.0 Vbat=3.2V Vbat=4.1V Vbat=3.7V 70.0 60.0 50.0 40.0 0 200 400 600 800 1000 1200 1400 Output Current (mA) Radiated EMI Test PCB Bottom Layer PC Board Layout Guidance 1) Arrange the power components to reduce the AC loop size that consists of C2, VOUT, SW and PGND. C2 (1206 size) must be placed close to the IC and across the VOUT and PGND traces and SW trace goes under the C2 . EVALUATION KITS Power Bank ACT2801CDMB-#1 VBAT Vo Io 3.0V-4.5V 5V+/-100mV 1350mA 8 ACT2802 5V/2.1A Smart Power Bank Input Voltage Output Voltage Charge Current Boost Output Efficiency Topology 4.5-5.5V 5.0V 2A 2.5A 92%@2.1A@VBAT=4.1V Buck/Boost Operation and Application ACT2802 is a space-saving and high-performance lowprofile single-chip solution for backup battery pack and standalone battery charger. ACT2802 integrates all the functions that backup battery packs need, including switching charger, Boost converter and LED indication. L=46.4mm W=21.2mm Design Features Dedicated Single Chip Solution for Mobile Power Programmable up to 5V/3.0A Input Current Programmable up to 5V/2.1A Output Current Programmable up to 3.0A Switching Charge Current Pogrammable 4.1V to 4.35V Battery Voltage Prioritized Power Path from Input to Output 1.1MHz/0.55MHz Switching Frequencies 4LEDs Battery Level and Status Indication <10A Low Battery Leakage Current No Load Shutdown and Push Button Turn-on Battery Impedance Compensation Battery Over Current, Over Voltage, Over Temperature and Short Circuit Protections Charge Current Foldback at 110C Die Temperature IC Over Temperature Protection Schematic ACT2802 operates at 1.1MHz for switching charger and 0.55MHz for Boost converter allowing tiny external inductor and capacitors. ACT2802 provides a direct power path from input to output with programmable current limit while providing power to switching charger. Output has higher priority than battery charger if the programmed input current limit is reached. ACT2802 charges battery with full cycle of preconditioning, fast charge with constant current and constant voltage until end of charge. The battery charger is thermally regulated at 110C with charge current foldback. ACT2802 Boost converter steps battery voltage up to 5V. Boost converter features high efficiency, constant current regulation, short circuit protection and over voltage protection. ACT2802 provides 3.5mA constant currents to drive 4 LEDs to indicate battery level and charging status. Battery impedance is compensated at battery level indication. Boost Output V/I Profile Boost CC/CV Profile ILIM CSN VIN CSP Boost Output Voltage (V) IOST R3 BAT PGND SW SW VOUT VOUT U2 R20 C6 C16 C2 R2A VBAT =3.7V 4.5 4.0 VBAT =4.1V 3.5 L1 R9 R21 C7 VBAT =3.2V 5.0 R2 3.0 R17 C5 C4 R16 R4 ACT2802 nPG Output USB R15 R5 C8 R18 Q3 LED2 BTV ICST D1 D- LED3 PB D2 + D+ - LED4 RIMC TH BLVS LED1 AGND D- C3 LED1 + R10 LED2 Input USB D+ - 5.5 R1 C11 C12 LED3 R11 LED4 R13 R8 HZ PB R7 R6 R12 R14 BAT 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 C9 Output Current (A) 9 ACT2802 5V/2.1A Smart Power Bank Bill of Materials 2) Use copper plane for PGND for best heat dissipation and REF Description MFTR L1 U2 Q3 D1 D2 C2,C5,C9 C3 C4 C6 C7 C8,C11,C12, C16 R1 R2,R2A R3 R4,R15 R5 R6 R7 R8 R9 R10 R11 R12,R13 R14,R16 R17 R18,R20 R21 LED1,LED2,LED3,LED4 PB 2.2uH 6*3*3 coil 0.55mm 6A AO4453,Rdson=19m at GS=-4.5V MMBT3906 SS12,Vf=0.5V, 20V Schottky IN4148, Vf=0.7V, 75V Fast Swith Diode Ceramic capacitor, 22uF/10V, X7R, 1206 Ceramic capacitor, 4.7uF/10V, X7R, 0805 Ceramic capacitor, 0.1uF/10V, X7R, 0603 Ceramic capacitor, 10nF/10V, X7R, 0603 Ceramic capacitor, 2.2nF/10V, X7R, 0603 Ceramic capacitor, 2.2uF/10V, X7R, 0603 Chip Resistor, 750, 1/16W, 1%, 0603 Chip Resistor, 50m, 1/8W, 1%, 1206 Chip Resistor, 93.1k, 1/16W, 1%, 0603 Chip Resistor, 43.2k, 1/16W, 1%, 0603 Chip Resistor, 25k, 1/16W, 1%, 0603 Chip Resistor, 10k, 1/16W, 5%, 0603 Chip Resistor, 60k, 1/16W, 1%, 0603 Chip Resistor, 100k, 1/16W, 1%, 0603 Chip Resistor, 1, 1/10W, 5%, 0805 Chip Resistor, 2.7, 1/8W, 5%, 1206 Chip Resistor, 200k, 1/16W, 5%, 0603 Chip Resistor, 715k, 1/16W, 5%, 0603 Chip Resistor, 49.9k, 1/16W, 1%, 0603 Chip Resistor, 75k, 1/16W, 1%, 0603 Chip Resistor, 100k, 1/16W, 5%, 0603 Chip Resistor, 2.2, 1/16W, 5%, 0603 LED, 0603, Blue Push Button Sunlord AOS Vishay Mccsemi Philips Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK USB Micro-USB U1 10.2*14.6*7mm, 4PDIP90 MICRO USB 5P/F SMT B IC, ACT2802 T-QFN 44-24 noise immunity. AGND and PGND are connected under the IC thermal pad with 4x4 vias matrix. 3) SW copper area should be limited due to EMI consideration. 4) Use Kevin sense from sense resistor R2A and R2B to CSP and CSN pins as shown in the layout figure. 5) A separate trace is from VBAT input to BAT pin for battery voltage sense accuracy. 6) RC snubber is recommended to add across SW to PGND to reduce EMI noise. 7) A 20V/3.0A schottky is added from inductor terminal to VOUT to reduce EMI noise. Typical performance characteristics ACT PCB Top Layer Radiated EMI Test PCB Bottom Layer PC Board Layout Guidance 1) Arrange the power components to reduce the AC loop size that consists of C2, VOUT, SW and PGND. C2 (1206 size) must be placed close to the IC and across the VOUT and PGND EVALUATION KITS Power Bank ACT2802DMB-#1 VBAT Vo Io 3.0V-4.5V 5V+/-100mV 2100mA traces and SW trace goes under the C2 . 10 ACT2802C 5V/2.35A Smart Power Bank Input Voltage Output Voltage Charge Current Boost Output Efficiency Topology 4.5-5.5V 5.0V 2A 2.35A 92%@2.1A@VBAT=4.1V Buck/Boost Operation and Application L=46.4mm Design Features Dedicated Single Chip Solution for Mobile Power Programmable up to 5V/3.0A Input Current Programmable up to 5V/2.5A Output Current Programmable up to 2.5A Switching Charge Current Pogrammable 4.1V to 4.35V Battery Voltage Prioritized Power Path from Input to Output 1.1MHz/0.55MHz Switching Frequencies 4LEDs Battery Level and Status Indication Up to 50mA open-drain Flashlight driver <10A Low Battery Leakage Current No Load Shutdown and Push Button Turn-on Battery Impedance Compensation Battery Over Current, Over Voltage, Over Temperature and Short Circuit Protections Charge Current Foldback at 110C Die Temperature IC Over Temperature Protection Schematic ACT2802C is a space-saving and high-performance lowprofile single-chip solution for backup battery pack and standalone battery charger. ACT2802C integrates all the functions that a backup battery pack needs, including switching charger, boost converter and LED indication. ACT2802C operates at 1.1MHz for switching charger and 0.55MHz for boost converter allowing tiny external inductor and capacitors.ACT2802C provides a direct power path from input to output with programmable current limit while providing power to switching charger. Output has higher priority than battery charger if the programmed input current limit is reached. ACT2802C charges battery with full cycle of preconditioning, fast charge with constant current and constant voltage until end of charge. The battery charger is thermally regulated at 110C with charge current foldback. ACT2802C boost converter steps battery voltage up to 5V. Boost converter features high efficiency, constant current regulation, short circuit protection and over voltage protection. ACT2802C provides 3.5mA constant currents to drive 4 LEDs to indicate battery level and charge status. Battery impedance is compensated for battery level indication. ACT2802C has an Open-drain Flashlight driver. A internal switch can handle up to 50mA. Boost Output V/I Profile LED Boost CC/CV Profile Boost Output Voltage (V) LED2 LED3 LED4 RIMC FLD BLVS LED1 LED1 R5 PB BTV AGND ICST R4 ACT2802C R3 nPG IOST ILIM CSN VIN CSP D2 C3 C8 R18 R21 C2 C6 BAT PGND SW R10 SW VOUT + VOUT Input USB D+ - 5.5 R1 C12 D- LED2 C11 LED3 R11 LED4 R13 HZ R8 PB R7 R6 R12 C16 D1 Q1 R2 + Q3 D+ - R9 R20 C7 Output USB R15 R14 R17 C4 C13 C14 5.0 VBAT =3.7V 4.5 4.0 VBAT =4.1V 3.5 L1 D- VBAT =3.2V R2A C5 BAT 3.0 0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 R16 Output Current (A) 11 ACT2802C 5V/2.1A Smart Power Bank Bill of Materials REF 2) Use copper plane for PGND for best heat dissipation and Description MFTR L1 Core 6.5*3*3 Dip 2.2uH 6A Sunlord U2 AO4453,Rdson=19m at GS=-4.5V AOS Q3 MMBT3906 Vishay D1 SS12,Vf=0.5V, 20V Schottky Panjit D2 IN4148, Vf=0.7V, 75V Schottky Vishay C2,C5,C13,C14 Ceramic capacitor, 22uF/10V, X7R, 1206 Murata/TDK C3 Ceramic capacitor, 4.7uF/10V, X7R, 0805 Murata/TDK C4 Ceramic capacitor, 0.1uF/10V, X7R, 0603 Murata/TDK C6 Ceramic capacitor, 10nF/10V, X7R, 0603 Murata/TDK noise immunity. AGND and PGND are connected under the IC thermal pad with 4x4 vias matrix. 3) SW copper area should be limited due to EMI consideration. 4) Use Kevin sense from sense resistor R2A and R2B to CSP and CSN pins as shown in the layout figure. C7 Ceramic capacitor, 2.2nF/10V, X7R, 0603 Murata/TDK 5) A separate trace is from VBAT input to BAT pin for battery C8,C11,C12, C16 Ceramic capacitor, 2.2uF/10V, X7R, 0603 Murata/TDK R1 Chip Resistor, 750, 1/16W, 1%, 0603 Murata/TDK voltage sense accuracy. R2,R2A Chip Resistor, 50m, 1/8W, 1%, 1206 Murata/TDK R3 Chip Resistor, 89k, 1/16W, 1%, 0603 Murata/TDK R4,R15 Chip Resistor, 43.2k, 1/16W, 1%, 0603 Murata/TDK R5 Chip Resistor, 25k, 1/16W, 1%, 0603 Murata/TDK R6 Chip Resistor, 51, 1/16W, 5%, 0603 Murata/TDK R7 Chip Resistor, 60k, 1/16W, 1%, 0603 Murata/TDK R8 Chip Resistor, 80k, 1/16W, 1%, 0603 Murata/TDK R9 Chip Resistor, 1, 1/10W, 5%, 0805 Murata/TDK R10 Chip Resistor, 2.7, 1/8W, 5%, 1206 Murata/TDK R11 Chip Resistor, 200k, 1/16W, 5%, 0603 Murata/TDK R12,R13 Chip Resistor, 715k, 1/16W, 5%, 0603 Murata/TDK R14,R16 Chip Resistor, 49.9k, 1/16W, 1%, 0603 Murata/TDK R17 Chip Resistor, 75k, 1/16W, 1%, 0603 Murata/TDK R18,R20 Chip Resistor, 100k, 1/16W, 5%, 0603 Murata/TDK R21 Chip Resistor, 2.2, 1/16W, 5%, 0603 Murata/TDK LED Flashlight LED Manu LED1,LED2,LED3,LED4 LED, 0603, Blue LED Manu PB Push Button USB 10.2*14.6*7mm, 4P Micro-USB MICRO USB 5P/F SMT B U1 IC, ACT2802C QFN 44-24 6) RC snubber is recommended to add across SW to PGND to reduce EMI noise. 7) A 20V/3.0A schottky is added from inductor terminal to VOUT to reduce EMI noise. Typical performance characteristics ACT PCB Top Layer Radiated EMI Test PCB Bottom Layer PC Board Layout Guidance 1) Arrange the power components to reduce the AC loop size that consists of C2, VOUT, SW and PGND. C2 (1206 size) must be placed close to the IC and across the VOUT and PGND EVALUATION KITS Power Bank ACT2802C -DMB-#1 VBAT Vo Io 3.0V-4.5V 5V+/-100mV 2350mA traces and SW trace goes under the C2 . 12 ACT2802+ACT6391 5V/2.1A+1A Smart Power Bank Input Voltage Output Voltage Charge Current Boost Output Efficiency Topology 4.5-5.5V 5.0V 2A 2.35A 92%@2.1A@VBAT=4.1V Buck/Boost BTV AGND ICST + Operation and Application IOST ILIM CSN VIN CSP D2 C3 D1 ACT2802 is a space-saving and high-performance lowprofile single-chip solution for backup battery pack and standalone battery charger. ACT2802 integrates all the functions that backup battery packs need, including switching charger, Boost converter and LED indication. Q2 R3 U2 R20 C6 C16 C2 + D- R4 C8 R18 Output USB 1 D+ - R5 ACT2802 nPG D- R10 LED1 Input USB D+ - LED1 PB R1 C11 C12 LED2 R11 LED3 R13 LED4 HZ PB R8 R12 R7 R6 Schematic LED2 LED3 BAT LED4 This application also can support the Boost Auto Turnoff at No Load and Push Button Turn-on. PB is pressed for 1.5s or Iout < 100mA for 45s, the USB1 will Auto Turn-off ; For the USB2, no load will cause the port shutoff. PGND RIMC SW SW This application can support the Boost Auto Startup with Load Detection. When devices plug in USB port, USB port will start up automatically. On the other hand, if a device plugs in USB2 with data line cable , the USB ports will auto start up. TH Dedicated Single Chip Solution for Mobile Power Programmable up to 5V/3.0A Input Current Programmable up to 5V/2.5A Output Current Programmable up to 2.5A Switching Charge Current Pogrammable 4.1V to 4.35V Battery Voltage Prioritized Power Path from Input to Output 1.1MHz/0.55MHz Switching Frequencies 4LEDs Battery Level and Status Indication Up to 50mA open-drain Flashlight driver <10A Low Battery Leakage Current No Load Shutdown and Push Button Turn-on Battery Impedance Compensation Battery Over Current, Over Voltage, Over Temperature and Short Circuit Protections Charge Current Foldback at 110C Die Temperature IC Over Temperature Protection QFN4x4-24 Package BLVS ACT2802 provides 3.5mA constant currents to drive 4 LEDs to indicate battery level and charge status. Battery impedance is compensated for battery level indication. VOUT Design Features ACT2802 boost converter steps battery voltage up to 5V. Boost converter features high efficiency, constant current regulation, short circuit protection and over voltage protection. VOUT L=55mm W=27mm ACT2802 charges battery with full cycle of preconditioning, fast charge with constant current and constant voltage until end of charge. The battery charger is thermally regulated at 110C with charge current foldback. R2A L1 R9 R21 R2 C7 VBAT R15 R17 C5 C4 R16 BAT F1 3A C9 R14 R22 ACT2802 operates at 1.1MHz for switching charger and 0.55MHz for Boost converter allowing tiny external inductor and capacitors. ACT2802 provides a direct power path from input to output with programmable current limit while providing power to switching charger. Output has higher priority than battery charger if the programmed input current limit is reached. COMP 1 8 FB EN R25 2 7 ACT6391 3 6 G 4 R24 SS C13 FREG 5 IN Output USB 2 D5 SW + D- C16 C15 R26 C14 C17 D+ - D3 R21 R23 Q3 PB C18 D4 13 ACT2802+ACT6391 5V/2.1A+1A Smart Power Bank Bill of Materials PC Board Layout Guidance REF Description MFTR L1 Q1 Q2 Q3 D1 D2 D3 D4 D5 C2,C5,C9 C3 C4 C6 C7 C8,C11,C12, C10,C13 C14 C15 C16 C17 R1 R2,R2A R3 R4,R15 R5 R6 R7 R8 R9 R10 R11 R12,R13 R17,R15 R14,R16 R18,R19 R20 R21 R22 R23 R24 R25 R26 LED1,LED2,LED3,LED4 PB USB Micro-USB U1 U2 2.2uH 6*3*3 coil 0.55mm 6A AO4453,Rdson=19m at GS=-4.5V MMBT3906 MMBT3904 SS12,Vf=0.5V, 20V Schottky IN4148, Vf=0.7V, 75V Fast Swith Diode SS32,Vf=0.55V, 20V Schottky SS32,Vf=0.55V, 20V Schottky SK23 Vf=0.5V, 30V Schottky Ceramic capacitor, 22uF/10V, X7R, 1206 Ceramic capacitor, 4.7uF/10V, X7R, 0805 Ceramic capacitor, 0.1uF/10V, X7R, 0603 Ceramic capacitor, 10nF/10V, X7R, 0603 Ceramic capacitor, 2.2nF/10V, X7R, 0603 Ceramic capacitor, 2.2uF/10V, X7R, 0603 Ceramic capacitor, 22uF/10V, X7R, 0603 Ceramic capacitor, 22nF/10V, X7R, 0603 Ceramic capacitor, 220pF/10V, X7R, 0603 Ceramic capacitor, 22uF/10V, X7R, 0603 Chip Resistor, 750, 1/16W, 1%, 0603 Chip Resistor, 50m, 1/8W, 1%, 1206 Chip Resistor, 93.1k, 1/16W, 1%, 0603 Chip Resistor, 43.2k, 1/16W, 1%, 0603 Chip Resistor, 25k, 1/16W, 1%, 0603 Chip Resistor, 10k, 1/16W, 5%, 0603 Chip Resistor, 60k, 1/16W, 1%, 0603 Chip Resistor, 80k, 1/16W, 1%, 0603 Chip Resistor, 1, 1/10W, 5%, 0805 Chip Resistor, 2.7, 1/8W, 5%, 1206 Chip Resistor, 200k, 1/16W, 5%, 0603 Chip Resistor, 715k, 1/16W, 5%, 0603 Chip Resistor, 49.9k, 1/16W, 1%, 0603 Chip Resistor, 43.2k, 1/16W, 1%, 0603 Chip Resistor, 100k, 1/16W, 5%, 0603 Chip Resistor, 2.2, 1/16W, 5%, 0603 Chip Resistor, 100k, 1/16W, 5%, 0603 Chip Resistor, 50k, 1/16W, 5%, 0603 Chip Resistor, 1, 1/16W, 5%, 0603 Chip Resistor, 20k, 1/16W, 5%, 0603 Chip Resistor,120k, 1/16W, 5%, 0603 Chip Resistor, 39, 1/16W, 5%, 0603 LED, 0603, Blue Push Button 10.2*14.6*7mm, 4P MICRO USB 5P/F SMT B IC, ACT2802 QFN 44-24 IC, ACT6391 MSOP-8 Sunlord AOS Vishay Vishay Mccsemi Philips Mccsemi Mccsemi WTE Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK Murata/TDK 1) Arrange the power components to reduce the AC loop size that consists of C2, VOUT, SW and PGND. C2 (1206 size) must be placed close to the IC and across the VOUT and PGND traces and SW trace goes under the C2. 2) Use copper plane for PGND for best heat dissipation and noise immunity. AGND and PGND are connected under the IC thermal pad with 4x4 vias matrix. 3) SW copper area should be limited due to EMI consideration. 4) Use Kevin sense from sense resistor R2 and R2A to CSP and CSN pins as shown in the layout figure. 5) A separate trace is from VBAT input to BAT pin for battery voltage sense accuracy. 6) RC snubber is recommended to add across SW to PGND to reduce EMI noise. A 20V/3.0A schottky is added from inductor terminal to VOUT to reduce EMI. noise. Typical performance characteristics Radiated EMI Test ACT ACT PCB Top Layer PCB Bottom Layer EVALUATION KITS Power Bank ACT2802C+ACT6391 VBAT Vo Io 3.0V-4.5V 5V+/-100mV 2350mA DMB-#1 14 ACT4501 5V/1.0A Smart Phone Car Charger Input Voltage Device Standby Power Output Efficiency Topology 10-28V ACT4501 60mW@12Vin 5V@1.0A 88%@1A , Vin=12V Buck ACT4501 provides constant current (CC) output with patented L=30.5mm W=14.5mm H=12.8mm Active-CC control technology that eliminate external sense resistors and the related efficiency loss. The ACT4501 operates at constant output voltage mode until it reaches the CC limit set by the ISET resistor. The devices are Design Features available in a SOP-8 package. Key Component Selection Wide input voltage range from 10V to 30V Transparent input voltage surge 12V-40V-12V 0.5A-1.25A output current limit 4.75V-5.25V during input and load transients 5% output voltage accuracy 125kHz switching frequency 88% efficiency at 12V input Least external components Low-cost single layer PCB with very good EMC performance Operation and Application Higher output inductance reduces the inductor peak-to-peak current at the expense of higher larger core size and inductance DCR value. Usually, an optimum inductance value is selected to make its peak-to-peak current 20%-40% of the maximum load current. The Schottky diode must have current rating higher than the maximum output current and the reverse voltage rating higher than the maximum input voltage. Output capacitor is selected to keep the peak-to-peak voltage ripple under required value and also meet the load transient requirements. Usually, the combination of low ESR capacitors ACT4501 is a step-down DC-DC converter with wide input and tantalum or electrolytic types are used. In this application, voltage range and high efficiency dedicated to 5V/1A smart 220uF electrolytic capacitor is connected in parallel with a phone micro car chargers. The ACT4501 is internally optimized small 2.2F ceramic capacitor to achieve small output voltage for good EMC performance and it passed radiated EMI test ripple and meet the requirements of input and load dynamic even on low-cost single layer PCBs without adding any EMC response. components. Figure 1: Schematic of Charger 15 ACT4501 5V/1.0A Smart Phone Car Charger Bill of Materials Choke Coil, ring core:8*4*5mm, Pi=0.35mm, L=82uH, dip MFTR 4) Use short trace connecting HSB-C4-SW loop. Haining 5) SW pad is a noisy node switching from Vin to GND. It should ElectronicMagnetics D1 Schottky Diode, B240A, 2A/40V, SMA Diodes C1 Capacitor,Electrolytic, 100uF/35V, 7x8mm, Dip KSC C2 Ceramic capacitor, 10uF/35V, X7R, 0805 Murata/TDK C3 Ceramic capacitor, 1nF/25V, X7R, 0603 Murata/TDK C4 Ceramic capacitor, 10nF/16V, X7R, 0603 Murata/TDK C5 Ceramic capacitor, 2.2nF/16V, X7R, 0603 Murata/TDK C6 Ceramic capacitor, 100pF/16V, X7R, 0603 Murata/TDK C7 Ceramic capacitor, 10uF/10V, X7R, 0805 Murata/TDK C8 Ceramic Electrolytic, 220uF/10V, 6.3x7mm, Dip Murata/TDK R1 Chip Resistor, 1K, 1/10W, 5%, 0603 Murata/TDK R2 Chip Resistor, 19.6K, 1/10W, 1%, 0603 Murata/TDK R3 Chip Resistor, 25K, 1/10W, 1%, 0603 Murata/TDK R5 Chip Resistor, 51K, 1/10W, 1%, 0603 Murata/TDK R6 Chip Resistor, 9.76K, 1/10W ,5%, 0603 Murata/TDK RA Chip Resistor, 75K, 1/10W, 1%, 0603 Murata/TDK RB/RD Chip Resistor, 49.9K, 1/10W, 1%, 0603 Murata/TDK RC Chip Resistor, 43.2K, 1/10W, 1%, 0603 Murata/TDK U1 IC, ACT4501, SOP-8 Active semi USB 15mm*10mm*8mm USB Manu PCB Top Layer be isolated away from the rest of circuit for good EMI and low noise operation. Typical performance characteristics Efficiency Efficiency(%) L1 DESCRIPTION 100 90 80 70 60 50 40 30 20 10 0 Vin=12V Vin=24V 10 100 Iout(mA) 1000 CC CV Curve 6 5 Output Voltage(V) REF 3) Place feedback resistor close to FB pin. 4 3 2 Vin=12V Vin=16V 1 Vin=24V 0 0 200 400 600 800 1000 1200 1400 1600 Load current(mA) Radiated EMI Test PCB Bottom Layer PC Board Layout Guidance 1) Arrange the power components to reduce the AC loop size that consists of CIN, IN pin, SW pin the Schottky diode. 2) Place input decoupling ceramic capacitor CIN as close to IN pin as possible. CIN is connected power GND with vias or short and wide path. EVALUATION KITS Car Charger ACT4501-DMB-#1 Vin Vo Io 10-28V 4.75-5.25V 1000mA 16 ACT4523 5V/2.1A iPad Car Charger Input Voltage Device Standby Power Output Efficiency Topology 10-32V ACT4523 39mW@12Vin 5V@2.1A 87%@2.1A Vin=12V Buck L=39.8mm W=14.9mm H=12.6mm provide CC function accuracy by senseless constant current control, which eliminates the expensive, high accuracy current sense resistor, making it ideal for battery charging applications. charging applications. The ACT4523 oper- Design Features Wide input voltage range from 10V to 38V Transparent input voltage surge 12V-40V-12V 4.75V-5.25V during input and load transients 5% output voltage accuracy 225kHz switching frequency Standby input current 3.0mA 2.35 accurate current limit Shut down at output short circuit Thermal shutdown protection Output cord compensation Over current protection Meet the EN55022 EMC standard ates at constant output voltage mode until it reaches the CC limit set by the ISET resistor. The devices are available in a SOP8-EP package. Key Component Selection Higher output inductance reduces the inductor peak-to-peak current at the expense of higher larger core size and inductance DCR value. Usually, an optimum inductance value is selected to make its peak-to-peak current 20%-40% of the maximum load current. The Schottky diode must have current rating higher than the maximum output current and the reverse voltage rating higher than the maximum input voltage. Output capacitor is selected to keep the peak-to-peak voltage Operation and Application ripple under required value and also meet the load transient ACT4523 is a wide input voltage, high efficiency Active CC step requirements. For this application, 22uFx2 ceramic capacitors -down DC-DC converter that operates in either CV (Constant are needed. In the case of tantalum or electrolytic types, Output Voltage) mode or CC (Constant Output Current) mode. 220uF capacitor is connected in parallel with a small 1F-10uF ACT4523 provides up to 3.0A output current at 225kHz ceramic capacitor to achieve small output voltage ripple and switching frequency. Active CC is a patent-pending con- meet the requirements of input and load dynamic response. trol scheme to Figure 1: Schematic of Charger 17 ACT4523 5V/2.1A iPad Car Charger Bill of Materials REF PC Board Layout Guidance DESCRIPTION MFTR 1) Arrange the power components to reduce the AC loop size L1 Choke Coil,Dip, 6*8mm, phi=0.35mm, L=70-75uH ACT L2 Choke Coil,Dip,T8*5*4mm, phi=0.45mm, L=33uH ACT L3 Common Mode Choke ,Dip,T6*3*3mm, phi=0.45mm, L=100uH ACT D1 Schottky Diode, B340A,40V/3A, SMA Diodes D2 Switch Diode,1N4148WS, 0.2W, SOD323 Diodes short and wide path. ZD1 Zener Diode,GMZJ6.2A,6.2V,0.5W,Mini-Melf (open) Panjit 3) Use copper plane for power GND for best heat dissipation ZD2 Zener Diode,BZT52C5V1S, 5.1V, 0.2W, SOD323 Diodes and noise immunity. C1A Electroytic capacitor,100uF/35V,6.3x11.5mm Koshin 4) Place feedback resistor close to FB pin. C1B Ceramic capacitor,2.2uF/50V,0805 Murata/TDK C1 Electroytic capacitor,33uF/50V,5x7mm Koshin C2 Electroytic capacitor,220uF/10V,6.3x7mm Koshin C2A Ceramic capacitor, 10uF/10V, X7R,0805 Murata/TDK 6) SW pad is a noisy node switching from Vin to GND. It should C01 Ceramic capacitor, 10uF/35V, X7R,1206 Murata/TDK be isolated away from the rest of circuit for good EMI and low C3 Ceramic capacitor, 0.01uF/25V, X7R,0603 Murata/TDK noise operation. C4 Ceramic capacitor,4700pF/10V, X7R, 0603 Murata/TDK C5 Ceramic capacitor, 47pF/25V, X7R, 0603 Murata/TDK C6 Ceramic capacitor, 1000pF/25V, X7R, 0603 Murata/TDK C7 Ceramic capacitor, 2.2uF/25V, X5R, 0603 Murata/TDK F1 Fuse,3A,1206 ( Replaced by 0 1206 chip resistor ) Murata/TDK R1 Chip Resistor, 51K, 1/16W, 1%, 0603 Murata/TDK R2 Chip Resistor, 9.76K, 1/16W, 1%, 0603 Murata/TDK R3,R4 Chip Resistor, 4.7K, 1/16W, 5%, 0603 Murata/TDK R5 Chip Resistor, 11.5K, 1/16W, 1%, 0603 Murata/TDK R7 Chip Resistor, 22, 1/16W, 1%, 0603 Murata/TDK R8 Chip Resistor, 3K, 1/16W ,5%,0603 Murata/TDK R10 Chip Resistor, 100K, 1/16W ,5%,0603 Murata/TDK R11 Chip Resistor, 75K, 1/16W ,5%,0603 Murata/TDK R13 Chip Resistor, 43.2K, 1/16W ,5%,0603 Murata/TDK R12,R14 Chip Resistor, 49.9K, 1/16W ,5%,0603 Murata/TDK ACT U1 IC, ACT4523,SOP-8-EP USB USB Rev:A LED LED ,White,Dip PCB Top Layer that consists of CIN, IN pin, SW pin the Schottky diode. 2) Place input decoupling ceramic capacitor CIN as close to IN pin as possible. CIN is connected power GND with vias or 5) Use short trace connecting HSB-C3-R7-SW loop. Thermal pad is connected to a large ground copper area. Typical performance characteristics Radiated EMI Test PCB Bottom Layer EVALUATION KITS Car Charger ACT4523-DMB-#2 Vin Vo Io 10-32V 4.75-5.25V 2100mA 18 ACT4523A 5V/2.4A iPad Car Charger Input Voltage Device Standby Power Output Efficiency Topology 10-36V ACT4523A 110mW@12Vin 5V@2.4A 89.7%@2.4A Vin=12V Buck patent-pending control scheme to provide CC function L=32mm W=16.2mm H=14.6mm accuracy by senseless constant current control, which eliminates the expensive, high accuracy current sense resistor, making it ideal for battery charging applications. charging applications. The ACT4523A operates at constant Design Features output voltage mode until it reaches the CC limit set by the Wide input voltage range from 10V to 36V Transparent input voltage surge 12V-40V-12V 4.75V-5.25V during input and load transients 5% output voltage accuracy 250kHz switching frequency Standby input current 5mA 2.4-2.9A accurate current limit Thermal shutdown protection Output cord compensation Over current protection Output over voltage protection ISET resistor. The devices are available in a SOP8-EP package. Key Component Selection Higher output inductance reduces the inductor peak-to-peak current at the expense of higher larger core size and inductance DCR value. Usually, an optimum inductance value is selected to make its peak-to-peak current 20%-40% of the maximum load current. The Schottky diode must have current rating higher than the maximum output current and the reverse voltage rating higher than the maximum input voltage. Output capacitor is selected to keep the peak-to-peak voltage Operation and Application ripple under required value and also meet the load transient ACT4523A is a wide input voltage, high efficiency requirements. For this application, 22uFx2 ceramic capacitors Active CC step-down DC/DC converter that are needed. In the case of tantalum or electrolytic types, operates in either CV (Constant Output Voltage) 220uF capacitor is connected in parallel with a small 1F-10uF mode or CC (Constant Output Current) mode. ceramic capacitor to achieve small output voltage ripple and ACT4523A provides up to 3.5A output current at meet the requirements of input and load dynamic response. 250kHz switching frequency. Active CC is a Figure 1: Schematic of Charger R6 0 1 +Vin F1 3A HSB 2 VIN 8 U1 ACT4523A SOP-8EP ISET GND ZD1 32V open EC1 47F 35V C1 10F 35V 4 R1 7.87k SW FB OVP C9 22nF/16V L1 30H/3.5A 3 C6 1nF/25V 5 7 R3 51k USB R14 100K R13 1k R9 R10 43.2k 43.2k COMP 6 R7 15k C3 4700pF 25V C4 R4 47pF 9.76k 25V open C7 C2 2.2nF 10pF D1 25v EC2 C5 25V SK54BL 220F 10F Open R8 10V 10V 5.1 R15 15K 2 3 DD+ 4 LED1 R11 R12 49.9k 49.9k GND 19 ACT4523A 5V/2.4A iPad Car Charger 2) Place input decoupling ceramic capacitor C1 as close to IN Bill of Materials REF DESCRIPTION MFTR pin as possible. C1 is connected power GND with vias or short and wide path. L1 Choke Coil, Dip, ring core 10*5*4mm, phi=0.45mm, L=30uH ACT D1 Schottky Diode, SK54BL, 40V/5A, SMA Diodes F1 3A Fuse(Replace by Resistor, 0, 1/8W, 5%, 0805) ZD1 32V Zener Diode, Optional Diodes EC1 Electrolytic capacitor, 47uF/35V, 5x7mm Koshin 4) Place feedback resistor close to FB pin. EC2 Electrolytic capacitor, 220uF/10V, 5x7mm Koshin 5) Use short trace connecting HSB-R6-C9-SW loop. Thermal C1 Ceramic capacitor, 10uF/35V, X7R, 1206 Murata/TDK pad is connected to a large ground copper area. C2 Ceramic capacitor, 10pF/25V, 6.3x7mm, Optional Murata/TDK 6) SW pad is a noisy node switching from Vin to GND. It should C3 Ceramic capacitor, 4.7nF/25V, X7R, 0603 Murata/TDK be isolated away from the rest of circuit for good EMI and low C4 Ceramic capacitor, 47pF/25V, X7R, 0603, Optional Murata/TDK C5 Ceramic capacitor, 10uF/10V, X7R, 0805 Murata/TDK C6 Ceramic capacitor, 1nF/25V, X7R, 0603, Optional Murata/TDK C7 Ceramic capacitor, 2.2nF/25V, X7R, 0603 Murata/TDK C9 Ceramic capacitor, 22nF/16V, X7R, 0603 Murata/TDK R1 Chip Resistor, 7.87K, 1/10W, 1%, 0603 Murata/TDK R3 Chip Resistor, 51K, 1/10W, 1%, 0603 Murata/TDK R4 Chip Resistor, 9.76K, 1/10W, 1%, 0603 Murata/TDK R6 Chip Resistor, 0, 1/10W, 5%, 0603 Murata/TDK R7 Chip Resistor, 15K, 1/10W, 5%, 0603 Murata/TDK R8 Chip Resistor, 5.1, 1/10W, 5%, 0603, Optional Murata/TDK R9, R10 Chip Resistor, 43.2K, 1/10W, 1%, 0603 Murata/TDK R11,R12 Chip Resistor, 49.9K, 1/10W, 1%, 0603 Murata/TDK R13 Chip Resistor, 1K, 1/10W, 5%, 0603 Murata/TDK R14 Chip Resistor, 100K, 1/10W, 1%, 0603 Murata/TDK R15 Chip Resistor, 15K, 1/10W, 1%, 0603 Murata/TDK U1 IC, ACT4523A, SOP-8-EP ACT USB USB Rev:A LED LED, White, 0805 3) Use copper plane for power GND for best heat dissipation and noise immunity. noise operation. Typical performance characteristics PCB Top Layer Radiated EMI Test PCB Bottom Layer PC Board Layout Guidance 1) Arrange the power components to reduce the AC loop size that consists of CIN, IN pin, SW pin the Schottky diode. EVALUATION KITS Car Charger ACT4523A-DMB#1 Vin Vo Io 10-36V 4.75-5.25V 2400mA 20 ACT4533A 5V/2.4A iPad Car Charger Input Voltage Device Standby Power Output Efficiency Topology 10-36V ACT4533A 60mW@12Vin 5V@2.4A 89.3%@2.4A Vin=12V Buck patent-pending control scheme to provide CC function L=32mm W=16.2mm H=14.6mm accuracy by senseless constant current control, which eliminates the expensive, high accuracy current sense resistor, making it ideal for battery charging applications. charging applications. The ACT4533A operates at constant Design Features output voltage mode until it reaches the CC limit set by the Wide input voltage range from 10V to 36V Transparent input voltage surge 12V-40V-12V 4.75V-5.25V during input and load transients 5% output voltage accuracy 125kHz switching frequency Standby input current 5.5mA 2.4-2.9A accurate current limit Thermal shutdown protection Output cord compensation Over current protection Output over voltage protection Pass EN55022 Radiation EMI Standard without adding EMI Components ISET resistor. The devices are available in a SOP8-EP package. Key Component Selection Higher output inductance reduces the inductor peak-to-peak current at the expense of higher larger core size and inductance DCR value. Usually, an optimum inductance value is selected to make its peak-to-peak current 20%-40% of the maximum load current. The Schottky diode must have current rating higher than the maximum output current and the reverse voltage rating higher than the maximum input voltage. Output capacitor is selected to keep the peak-to-peak voltage ripple under required value and also meet the load transient requirements. For this application, 22uFx2 ceramic capacitors Operation and Application are needed. In the case of tantalum or electrolytic types, ACT4533A is a wide input voltage, high efficiency 220uF capacitor is connected in parallel with a small 1F-10uF Active CC step-down DC/DC converter that ceramic capacitor to achieve small output voltage ripple and operates in either CV (Constant Output Voltage) meet the requirements of input and load dynamic response. mode or CC (Constant Output Current) mode. ACT4533A provides up to 3.5A output current at 125kHz switching frequency. Active CC is a Figure 1: Schematic of Charger R6 0 1 +Vin F1 3A HSB 2 VIN 8 U1 ACT4533A SOP-8EP ISET GND ZD1 32V open EC1 47F 35V C1 10F 35V 4 R1 7.87k SW FB OVP C9 22nF/25V L1 40H/3.5A 3 5 OVP circuit (Optional) C6 1nF/16V 7 USB R14 100K R3 51k R13 1k R9 R10 43.2k 43.2k COMP 6 R7 15k C3 2.2nF 16V C4 47pF 16V open R4 9.76k C7 1nF 25v SK54BL EC2 C5 220F 10F R8 10V 10V 5.1 R15 15K 2 3 DD+ 4 LED1 R11 R12 49.9k 49.9k GND 21 ACT4533A 5V/2.4A iPad Car Charger 2) Place input decoupling ceramic capacitor CIN as close to IN Bill of Materials REF DESCRIPTION MFTR L1 Choke Coil, Dip, ring core 9*5*4mm, phi=0.55mm, L=40uH ACT D1 Schottky Diode, SK54BL, 40V/5A, SMA Diodes F1 3A Fuse(Replace by Resistor, 0, 1/8W, 5%, 0805) ZD1 32V Zener Diode, Optional Diodes EC1 Electroytic capacitor, 47uF/35V, 5x7mm Koshin EC2 Electroytic capacitor, 220uF/10V, 5x7mm Koshin C1 Ceramic capacitor, 10uF/35V, X7R, 1206 Murata/TDK C3 Ceramic capacitor, 2.2nF/16V, X7R, 0603 Murata/TDK C4 Ceramic capacitor, 47pF/16V, X7R, 0603, Optional Murata/TDK C5 Ceramic capacitor, 10uF/10V, X7R, 0805 Murata/TDK C6 Ceramic capacitor, 1nF/16V, X7R, 0603, Optional Murata/TDK C7 Ceramic capacitor, 1nF/25V, X7R, 0603, Optional Murata/TDK C9 Ceramic capacitor, 22nF/25V, X7R, 0603 Murata/TDK R1 Chip Resistor, 7.87K, 1/10W, 1%, 0603 Murata/TDK R3 Chip Resistor, 51K, 1/10W, 1%, 0603 Murata/TDK R4 Chip Resistor, 9.76K, 1/10W, 1%, 0603 Murata/TDK R6 Chip Resistor, 0, 1/10W, 5%, 0603 Murata/TDK R7 Chip Resistor, 15K, 1/10W, 5%, 0603 Murata/TDK R8 Chip Resistor, 5.1, 1/10W, 5%, 0603, OPEN Murata/TDK R9,R10 Chip Resistor, 43.2K, 1/10W, 1%, 0603 Murata/TDK R11,R12 Chip Resistor, 49.9K, 1/10W, 1%, 0603 Murata/TDK R13 Chip Resistor, 1K, 1/10W, 5%, 0603 Murata/TDK R14 Chip Resistor, 100K, 1/10W ,1%, 0603, Optional Murata/TDK R15 Chip Resistor, 15K, 1/10W, 1%, 0603, Optional Murata/TDK U1 IC, ACT4533A, SOP-8-EP ACT USB USB Rev:A LED LED, White, Dip pin as possible. CIN is connected power GND with vias or short and wide path. 3) Use copper plane for power GND for best heat dissipation and noise immunity. 4) Place feedback resistor close to FB pin. 5) Use short trace connecting HSB-R6-C9-SW loop. Thermal pad is connected to a large ground copper area. 6) SW pad is a noisy node switching from Vin to GND. It should be isolated away from the rest of circuit for good EMI and low noise operation. Typical performance characteristics PCB Top Layer Radiated EMI Test PCB Bottom Layer PC Board Layout Guidance 1) Arrange the power components to reduce the AC loop size that consists of CIN, IN pin, SW pin the Schottky diode. EVALUATION KITS Car Charger ACT4533A-DMB#1 Vin Vo Io 10-36V 4.75-5.25V 2400mA 22 ACT4533B 5V/3.4A iPad Car Charger Input Voltage Device Standby Power Output Efficiency Topology 10-36V ACT4533B 60mW@12Vin 5V@3.4A 89.2%@3.4A Vin=12V Buck ACT4533B provides up to 3.9A output current at L=42mm W=20mm H=10mm 125kHz switching frequency. Active CC is a patent-pending control scheme to provide CC function accuracy by senseless constant current control, which eliminates the expensive, high accuracy current sense resistor, making it ideal for battery charging applications. charging applica- Design Features tions. The ACT4533B operates at constant output voltage Wide input voltage range from 10V to 32V Transparent input voltage surge up to 40V 4.75V-5.25V during input and load transients 5% output voltage accuracy 125kHz switching frequency Standby input current less than 6mA 3.4-3.9A accurate current limit Shutdown at output short to ground Thermal shutdown protection Output cord compensation Over current protection Output over voltage protection Pass EN55022 Radiation EMI Standard without adding EMI Components mode until it reaches the CC limit set by the ISET resistor. The devices are available in a SOP8-EP package. Key Component Selection Higher output inductance reduces the inductor peak-to-peak current at the expense of higher larger core size and inductance DCR value. Usually, an optimum inductance value is selected to make its peak-to-peak current 20%-40% of the maximum load current. The Schottky diode must have current rating higher than the maximum output current and the reverse voltage rating higher than the maximum input voltage. Output capacitor is selected to keep the peak-to-peak voltage ripple under required value and also meet the load transient Operation and Application requirements. For this application, 22uFx2 ceramic capacitors ACT4533B is a wide input voltage, high efficiency Active CC are needed. In the case of tantalum or electrolytic types, step-down DC/DC converter that operates in either CV 220uF capacitor is connected in parallel with a small 1F-10uF (Constant Output Voltage) mode or CC (Constant Output Cur- ceramic capacitor to achieve small output voltage ripple and rent) mode. meet the requirements of input and load dynamic response. Figure 1: Schematic of Charger R14 22K C10 2.2uF/25V F1 3A 2 R16 820 R15 2.2K R3 0 1 HSB VIN SW U1 ACT4533B FB SOP-8EP EN/ 8 ISET OVP GND COMP ZD1 32V open GND C1 C2 100F 10F 35V 35V 4 R1 5.6k C3 22nF/25V L1 28H/4.5A 3 C9 1nF/25V 5 7 R7 75K R5 51k 6 R6 R2 C4 25k 100pF 9.76k C5 16V 3.3nF 16V C6 1nF 25v C7 C8 D1 B540C R4 330F 1F 5.1 10V 10V R8 33K USB1 R13 4.7k R9 R10 43.2k 43.2k 1 2 3 DD+ 4 LED1 R11 R12 49.9k 49.9k USB2 1 2 3 DD+ 4 23 ACT4533B 5V/3.4A iPad Car Charger Bill of Materials 2) Place input decoupling ceramic capacitor CIN as close to IN MFTR pin as possible. CIN is connected power GND with vias or REF Description L1 Choke Coil,Dip,T11.5*5*4mm, phi=0.8mm, L=28uH D1 Schottky Diode, B540C,40V/5A, SMC Diodes C1 Electrolytic capacitor,100uF/35V, 6.3x11.5mm Koshin C2 Ceramic capacitor,10uF/35V, X7R,1206 Koshin C3 Ceramic capacitor, 22nF/25V, X7R, 0603 Murata/TDK 4) Place feedback resistor close to FB pin. C4 Ceramic capacitor, 100pF/16V, X7R, 0603(Optional) Murata/TDK 5) Use short trace connecting HSB-R3-C3-SW loop. Thermal C5 Ceramic capacitor, 3.3nF/16V, X7R, 0603 Murata/TDK C6 Ceramic capacitor, 1nF/25V, X7R, 0603 Murata/TDK pad is connected to a large ground copper area. C7 Solid capacitor, 330uF/10V, 7x8mm Murata/TDK 6) SW pad is a noisy node switching from Vin to GND. It should C8 Ceramic capacitor, 1uF/10V, X7R, 0603 Murata/TDK C9 Ceramic capacitor, 1nF/16V, X7R, 0603 Murata/TDK C10 Ceramic capacitor, 2.2uF/25V, X7R, 0603 Murata/TDK short and wide path. F1 Fuse, 3A, 1206 ( Replaced by 0 0805 chip resistor ) Murata/TDK R1 Chip Resistor, 5.6K, 1/10W, 1%, 0603 Murata/TDK R2 Chip Resistor, 25K, 1/10W, 5%, 0603 Murata/TDK R3 Chip Resistor, 0, 1/10W, 1%, 0603 Murata/TDK R4 Chip Resistor, 5.1, 1/10W, 5%, 0805 Murata/TDK R5 Chip Resistor, 51K, 1/10W, 1%, 0603 Murata/TDK R6 Chip Resistor, 9.76K, 1/10W, 1%, 0603 Murata/TDK R7 Chip Resistor, 75K, 1/10W, 1%, 0603 Murata/TDK R8 Chip Resistor, 33K, 1/10W, 1%, 0603 Murata/TDK R9,R10 Chip Resistor, 43.2K, 1/10W, 1%, 0603 Murata/TDK R11,R12 Chip Resistor, 49.9K, 1/10W, 1%, 0603 Murata/TDK R13 Chip Resistor, 4.7K, 1/10W, 1%, 0603 Murata/TDK R14 Chip Resistor, 22K, 1/10W, 1%, 0603 Murata/TDK R15 Chip Resistor, 2.2K, 1/10W, 1%, 0603 Murata/TDK R16 Chip Resistor, 820, 1/10W, 1%, 0603 Murata/TDK U1 IC, ACT4533B, SOP-8-EP ACT USB USB Rev:A LED LED, White, Dip 3) Use copper plane for power GND for best heat dissipation and noise immunity. be isolated away from the rest of circuit for good EMI and low noise operation. Typical performance characteristics PCB Top Layer Radiated EMI Test PCB Bottom Layer PC Board Layout Guidance 1) Arrange the power components to reduce the AC loop size that consists of CIN, IN pin, SW pin the Schottky diode. EVALUATION KITS Car Charger ACT4533B-DMB-#1 Vin Vo Io 10-32V 4.75-5.25V 3400mA 24 ACT4503--5V/3.4A Dual-Output Car Charger Input Voltage Device Standby Power Output Efficiency 7.5-33V ACT4503 150mW@12Vin 5V@2.4+1A 90%@3.4A,Vin=12V Key Component Selection Higher output inductance reduces the inductor peak-to-peak current at the expense of higher larger core size and inductance DCR value. Usually, an optimum inductance value is selected to make its peak-to-peak current 20%-40% of the L=59mm W=20.2mm H=18mm maximum load current. The Schottky diode must have current rating higher than the maximum output current and the reverse voltage rating higher than the maximum input voltage. Design Features Double schottky diodes could be added to achieve higher efficiency and pass single fault test. Output capacitor is se- Wide input voltage range from 7.5V to 36V Transparent input voltage surge 12V-40V-12V 4.75V-5.25V during input and load transients 5% output voltage accuracy 200kHz switching frequency Standby input current 10mA Programmable precise output current limit via sensing resistance 3ms internal soft startup time Cycle-by-cycle over current protection Thermal shutdown protection Output cord compensation Nearly zero power loss at over loading or output short Hiccup mode at output over voltage Hiccup mode at output over current Auto recovery into full load after faults Meet EN5502 EMC standard lected to keep the peak-to-peak voltage ripple under required value and also meet the load transient requirements. In the case of tantalum or electrolytic types, 680uF capacitor is connected in parallel with a small 1F-10uF ceramic capacitor to achieve small output voltage ripple and meet the requirements of input and load dynamic response. Figure 1: Schematic of 5V/3.4A Dual-Output Car Charger 25 ACT4503--5V/3.4A Dual-Output Car Charger PC Board Layout Guidance Bill of Materials REF DESCRIPTION MFTR L1 L2 Choke Coil, 6*3*3mm, L=150uH, dip Choke Coil, ring core, 25uH,11*6.5*4mm, 5A, dip ACT ACT D1 Schottky Diode, SSC54, 40V/5A, SMC Vishay 2) Place input decoupling ceramic capacitor CIN as close to IN ZD1 Open pin as possible. CIN is connected power GND with vias or 1) Arrange the power components to reduce the AC loop size that consists of CIN, IN pin, SW pin the Schottky diode. ZD2 Zener Diode, 6.2V/0.2W Diodes C1 Capacitor, Electrolytic, 47uF/35V, 6.3x8mm, 105 KSC C2 Capacitor, Electrolytic, 100uF/35V, 6.3x11.5mm, 105 Koshin C3 capacitor, Electrolytic, 680uF/10V, 8x11.5mm, 105 Koshin C4 Ceramic capacitor, 2.2uF/35V, X7R, 0805 Murata/TDK C5 Ceramic capacitor, 10uF/35V, X7R, 1206 Murata/TDK C6 Ceramic capacitor, 4.7nF/25V, X7R, 0402 Murata/TDK 4) Place feedback resistor close to FB pin. C7 C8 Ceramic capacitor, 100pF/25V, X7R, 0402 Ceramic capacitor, 22nF/25V, X7R, 0603 Murata/TDK Murata/TDK 5) Use short trace connecting HSB-R5-C8-SW loop. C9 Ceramic capacitor, 2.2nF/25V, X7R, 0603 Murata/TDK 6) SW pad is a noisy node switching from Vin to GND. It should C10 Optional Murata/TDK C11 Ceramic capacitor, 2.2nF/25V, X7R, 0805 Murata/TDK be isolated away from the rest of circuit for good EMI and low C12 C13 Ceramic capacitor, 2.2uF/10V, X7R, 0805 Ceramic capacitor, 1uF/25V, X7R, 0603 Murata/TDK Murata/TDK Rcs1 Chip Resistor, 30m, 1/4W, 1%, 1206 ROHM R1 R2 R3 R4 Chip Resistor, 100K, 1/10W, 1%, 0603 Chip Resistor, 2K, 1/10W, 1%, 0603 Chip Resistor, 51K, 1/10W, 1%, 0603 Chip Resistor, 9.76K, 1/10W, 1%, 0603 Vishay Murata/TDK Murata/TDK Murata/TDK R5 Chip Resistor, 0, 1/10W, 5%, 0603 Murata/TDK R6 Chip Resistor, 15K, 1/10W, 5%, 0603 Murata/TDK R7 Chip Resistor, 5.1, 1/4W, 5%, 1206 Murata/TDK R8 Chip Resistor, 2K, 1/10W, 1%, 0603 Murata/TDK R10 Optional R11,R12 Chip Resistor, 1K, 1/10W, 1%, 0603 Murata/TDK R13 Chip Resistor, 1K, 1/10W, 5%, 0603 Murata/TDK R14,R16,R18 Chip Resistor, 43.2K, 1/10W, 1%, 0603 Murata/TDK R15,R17,R19,R 21 Chip Resistor, 49.9K, 1/10W, 1%, 0603 Murata/TDK R20 Chip Resistor, 75K, 1/10W, 1%,0603 Murata/TDK U1 IC, ACT4503, SOP-8 EP ACT LED LED, Red, 0805 USB 17.5mm*14.5mm*15.7mm short and wide path. 3) Use copper plane for power GND for best heat dissipation and noise immunity. noise operation. 7) Thermal pad is connected to GND layer through at least 6 vias. Typical performance characteristics PCB Top Layer Radiated EMI Test PCB Bottom Layer EVALUATION KITS Car Charger ACT4503DMB-#2 Vin Vo Io 10-33V 4.75-5.25V 2.4A+1A 26 ACT4455--5V/4.2A Dual-Output Car Charger Input Voltage Device Standby Power Output Efficiency 7.5-33V ACT4455 150mW@12Vin 5V@2.1+2.1A 88%@4.2A Vin=12V Key Component Selection Higher output inductance reduces the inductor peak-to-peak current at the expense of higher larger core size and inductance DCR value. Usually, an optimum inductance value is selected to make its peak-to-peak current 20%-40% of the L=63mm W=23.5mm H=18mm maximum load current. The Schottky diode must have current rating higher than the maximum output current and the reverse voltage rating. Design Features Wide input voltage range from 7.5V to 36V Transparent input voltage surge 12V-40V-12V 4.75V-5.25V during input and load transients 5% output voltage accuracy 200kHz switching frequency Standby input current 10mA Programmable precise output current limit via sensing resistors 3ms internal soft startup time Cycle-by-cycle over current protection Thermal shutdown protection Output cord compensation Nearly zero power loss at over loading or output short Hiccup mode at output over voltage Auto recovery into full load after faults Meet EN5502 EMC Standard Higher than the maximum input voltage. Double schottky diodes could be added to achieve higher efficiency and pass single fault test. Output capacitor is selected to keep the peakto-peak voltage ripple under required value and also meet the load transient requirements. In the case of tantalum or electrolytic types, 680uF capacitor is connected in parallel with a small 1F-10uF ceramic capacitor to achieve small output voltage ripple and meet the requirements of input and load dynamic response. Figure 1: Schematic of 5V/4.2A Dual-Output Car Charger 27 ACT4455--5V/4.2A Dual-Output Car Charger Bill of Materials PC Board Layout Guidance REF DESCRIPTION MFTR L1 Choke Coil, 6*3*3mm, L=130uH, dip ACT that consists of CIN, IN pin, SW pin the Schottky diode. L2 Choke Coil, ring core, 18uH, 11*6.5*4mm, 5A, dip ACT D1 Schottky Diode, V10PL45-EH 45V/10A, SMPC Vishay 2) Place input decoupling ceramic capacitor CIN as close to IN 1) Arrange the power components to reduce the AC loop size pin as possible. CIN is connected power GND with vias or ZD1 Open ZD2 C1 C2 Zener Diode, 6.2V/0.2W Capacitor, Electrolytic, 47uF/35V, 6.3x8mm, 105 Capacitor, Electrolytic, 100uF/35V, 6.3x11.5mm, 105 Diodes KSC Koshin C3 capacitor, Electrolytic, 680uF/10V, 8x11.5mm, 105 Koshin C4 C5 Ceramic capacitor, 2.2uF/35V, X7R, 0805 Ceramic capacitor, 10uF/35V, X7R, 1206 Murata/TDK Murata/TDK C6 Ceramic capacitor, 4.7nF/25V, X7R, 0402 Murata/TDK C7 Ceramic capacitor, 100pF/25V, X7R, 0402 Murata/TDK C8 Ceramic capacitor, 22nF/25V, X7R, 0603 Murata/TDK C9 Ceramic capacitor, 2.2nF/25V, X7R, 0603 Murata/TDK C10 Optional Murata/TDK be isolated away from the rest of circuit for good EMI and low C11 Ceramic capacitor, 2.2nF/25V, X7R, 0805 Murata/TDK noise operation. C12 Ceramic capacitor, 2.2uF/10V, X7R, 0805 Murata/TDK C13,C14 Ceramic capacitor, 1uF/25V, X7R, 0603 Murata/TDK Rcs1,Rcs2 Chip Resistor, 50m,1/2W, 1%, 1210 ROHM R1A,R2A Optional R3 R4 Chip Resistor, 51K, 1/10W, 1%, 0603 Chip Resistor, 9.76K, 1/10W, 1%, 0603 Murata/TDK Murata/TDK R5 Chip Resistor, 0, 1/10W, 5%, 0603 Murata/TDK R6 Chip Resistor, 15K, 1/10W, 5%, 0603 Murata/TDK R7 Chip Resistor, 5.1, 1/4W, 5%, 1206 Murata/TDK R8 Chip Resistor, 2K, 1/10W, 1%, 0603 Murata/TDK R9,R10 Optional R11,R12 Chip Resistor, 1K, 1/10W, 1%, 0603 Murata/TDK R13 Chip Resistor, 1K, 1/10W, 5%, 0603 Murata/TDK Chip Resistor, 75K, 1/10W, 1%, 0603 Murata/TDK Chip Resistor, 49.9K, 1/10W, 1%, 0603 Murata/TDK R16,R20 Chip Resistor, 43.2K, 1/10W, 1%, 0603 Murata/TDK U1 IC, ACT4455, SOP-8 EP ACT LED, Red, 0805 17.5mm*14.5mm*15.7mm and noise immunity. 4) Place feedback resistor close to FB pin. 5) Use short trace connecting HSB-R5-C7-SW loop. 6) SW pad is a noisy node switching from Vin to GND. It should 7) Thermal pad is connected to GND layer through at least 6 vias. Typical performance characteristics Efficiency 95 Efficiency (%) R14,R18 LED 3) Use copper plane for power GND for best heat dissipation 90 R15,R17,R19,R 21 USB short and wide path. 85 80 Vin=12V Vin=24V 75 70 200 600 1000 PCB Top Layer 1400 1800 2200 2600 3000 3400 3800 4200 Load Current(mA) Radiated EMI Test PCB Bottom Layer EVALUATION KITS Car Charger ACT4455DMB-#1 Vin Vo Io 10-33V 4.75-5.25V 2.1A+2.1A 28 ACT111A High Efficiency, Low Cost HB LED Lighting Input Voltage LED # Output Current VFB Topology 4.8 - 30VDC 1-6 1.5A 100mV Buck Circuit Bottom View Circuit Top View Key Component Selection An inductor with RMS rating greater than load current and its saturation current at least 30% higher should be used. Inductance value is selected to make its ripple current 20-30% of the load current. A Schottky diode (D5) is usually used for better efficiency as long as the breakdown voltage can withstand the maximum output voltage. The forward current rating of the diode must be at least equal to the maximum LED current. Design Features 95% Efficiency 4.8V to 30V Input and up to 1.5A Output 1.4 MHz Switching & Small SOT23-6 Package PWM (0-100%, 0.1-10kHz) Dimming Thermal Shutdown & Short Circuit Protection For AC input, if a conventional step-down line transformer is used, a low cost IN4001can be used for D1-D4. However, if a high frequency electronic transformer is used, a Schottky diode such as SS14 should be used for high efficiency operation. For input and output capacitors, small size and low ESR ceramic capacitor is preferred. Operation and Application The bridge rectifier is for AC input only. The DC input is directly PC Board Layout Guidance connected to IN and ground. The ACT111A has an under- Place input capacitor (C1) to IN pin, inductor (L1) and diode voltage lockout (UVLO) at 4.0V with 250mV hysteresis. When (D5) to SW pin as close as possible to reduce the voltage ring- input voltage falls below 4.0V, SW stops switching. The device is ing at these pins. Place the current sense resistor (R2 ) close to activated as input voltage goes higher than 4.2V. FB pin. Minimize ground noise by connecting high current The LED output current is sensed by a resistor in series with the ground returns, the input capacitor ground lead, and the out- LED. The ACT111A precisely regulates the LED current by the put filter ground lead to a single point (star ground configura- internal EA and 0.1V reference. The average LED current is de- tion). There are two power loops in normal operation, one is termined by the equation: ILED =0.1V/RSENSE. formed when the SW is high and the high current flows The ACT111A allows dimming with a PWM signal at the DIM through input capacitor (C1), internal MOSFET, inductor(L1), pin. A signal level above 1.5V enables switching and turns LED LEDs, RSENSE(R2) to ground. The other loop is through inductor on. To turn off the LED current, the signal level has to be below (L1), LEDs, RSENSE(R2), ground to diode(D5). Make these loop 1.52V. The dimming signal frequency range is from 100Hz to areas as small as possible to minimize noise interaction. 10kHz.A 200k resistor is needed to connect between FB pin RSENSE. A 100pF capacitor is recommended to connect from the FB pin to ground. 29 ACT111A High Efficiency, Low Cost HB LED Lighting Schematic ( VIN=12VDC or AC, 3x350mA LEDs ) PCB Top Layer Bill of Materials Ref. Description Mftr C1 Capacitor Tantalum,100uF/16V, D Case AVX C2 Capacitor, Ceramic, 0.01uF/50V, 0603 POE C3 Capacitor, Ceramic,100pF/25V, 0603 POE C4 Capacitor Ceramic, 10uF/16V, 1206 AVX D1-D4 Diode shottoky, 40V/1A, SS14, SMA PANJIT D5 Schottky Barrier Rectifier, SR24, 40V/2.0A, SMB PANJIT ZD1 Diode Zener, GLZ13A, 13V, 0.5W, MINI-MELF PANJIT R1 Meter Film Resistor, 30K, 0603, 5% TY-OHM R2 Meter Film Resistor, 0.28, 1206, 1% TY-OHM R4 Meter Film Resistor, 510, 1206, 5% TY-OHM L1 SMD Power Inductor, SR0604220ML, 10uH, 20% QianRu U1 IC, ACT111, SOT23-6 Active Typical performance characteristics PCB Bottom Layer 30 Low Power DC-DC Converter Products 31 Low Power Step-Down DC-DC Converters PART NUMBER MAX VIN (V) IOUT (mA) PACKAGE NOTES ACT6906 5.5 600 SOT-23-5 Industry-Standard Pinout ACT6907 5.5 600 SOT-23-5 Industry-Standard Pinout ACT8309 5.5 900 TDFN33-8 Power-OK Output ACT8310 5.5 1200 TDFN33-8 Power-OK Output ACT8311 5.5 1500 TDFN33-8 Power-OK Output Multi-Function Step-Down DC-DC Converters Cost-effective, easy-to-use combinations of basic power functions. Pin-control for simple, flexible enable control. PART NUMBER MAX VIN (V) CONFIGURATION DC/DC IOUT (mA) LDO IOUT (mA) WLED PACKAGE ACT8325 5.5 2xDC/DC 350/550 x x TDFN33-10 ACT8332 5.5 1xDC/DC + 2xLDO 350 360/360 x TDFN33-10 ACT8335 5.5 1xDC/DC + 2xLDO 550 360/360 x TDFN33-10 ACT8342 5.5 1xDC/DC + 2xLDO 350 80/150 x TDFN33-16 Reset Output, Push-Button Control ACT8345 5.5 1xDC/DC + 2xLDO 550 360/360 x TDFN33-16 Reset Output, Push-Button Control NOTES Step-Up DC-DC Converters Single-function step-up DC/DC converters for portable applications. PART NUMBER MAX VIN (V) CONFIGURATION VOUT (V) ILIM (A) PACKAGE ACT6357 5.5 WLED Up to 40V 0.5 TDFN33-8 ACT6358 5.5 WLED Up to 40V 1.0 TDFN33-8 ACT6359 5.5 WLED Up to 40V 0.5 SOT23-6 ACT6360 5.5 WLED Up to 40V 1.0 SOT23-6 ACT6390 5.5 Voltage Boost Up to 12V 1.7 MSOP-8 ACT6391 5.5 Voltage Boost Up to 12V 2.5 MSOP-8 ActivePathTM Battery Chargers PART NUMBER ACT3780 MAX VIN (V) 6.5 /12 IOUT (A) PACKAGE Up to 1.5A TDFN44-20 : Maximum Operating Input Voltage, Over-Voltage Protection disables charger above this voltage : Maximum Sustainable Input Voltage 32 Green Power AC-DC Converter Products 33 AC-DC Product Selection Guide ACT361 (40kHz) PSR ACT364 (80kHz) PSR ACT365/6 (80kHz) PSR ACT334 (80kHz) <30mW PSR ACT337 (80kHz) <30mW PSR ACT410/1 (120kHz) PSR, QR, <100mW, DCM,CC ACT412 (120kHz) PSR, QR, <100mW, DCM, Constant Power ACT413 (80kHz) PSR, QR, <100mW, DCM, CC ACT518SH (75kHz) <100mW SSR, QR & CCM ACT510 (120kHz) <100mW SSR, QR & DCM ACT512 (75kHz) <100mW SSR, QR &CCM ACT512E (65kHz) <75mW SSR, QR &CCM ACT513 (40kHz) <100mW SSR, QR &CCM 1W 5W 8W 10W 24W 60W Primary Side Regulation (PSR) PWM Controllers - ActivePSRTM Secondary Side Regulation PWM Controllers - ActiveQRTM 34 ACT334 5V/1A Universal Charger For DOE Standard Input Voltage Device Average Efficiency Standby Power Output Voltage Output Power Topology 90-264VAC ACT334 75.60% 39mW 5V 5W PSR flyback Description Key Features ACT334 is a 5 star high performance PSR CV/CC control- ler to achieve <30mW standby power. The unique fast startup architecture, 80kHz maximum switching frequency and driving external NPN make ACT334 the most cost effective 5 star solutions for small size cell phone charger. Patented Primary Side Regulation Technology Lowest total cost solution for cell phone charger using PWM IC Universal input voltage range from 85 to 264 VAC Accurate CV (5%) and CC (10%) performance Adjustable up to 80kHz Switching Frequency Integrated Output Cord Compensation CV & CC correction for Input line, output DC cord and transformer inductance variation No-load standby power < 0.05W Exceed the latest DOE average efficiency requirement No Y capacitor for EMI filter Short circuit and over-voltage protection Tiny SOT23-6 package. Mini size W*L*H=25.5mm*46.5mm*16mm Schematic 35 ACT334 5V/1A Universal Charger For DOE Standard Build Up Capacitor, Electrolytic, 4.7uF/400V, 8x12mm KSC C2 Capacitor, Electrolytic, 6.8uF/400V, 10x12mm KSC C3 Capacitor, Ceramic, 1000pF/500V,1206,SMD POE C4 Capacitor, Electrolytic,4.7uF/35V,5x11mm KSC C5 Capacitor, Solid, 470uF/10V, 8x12mm C6 Capacitor, Electrolytic, 330uF/10V, 8x12mm KSC C9 Capacitor, Ceramic,1000pF/50V, 0805, SMD POE WIRE INSULATION LAYERS C1 TERMINAL LAYERS Active-Semi. TURNS IC, ACT334,SOT23-6 FINISH U1 SIZE*QTY MFTR START DESCRIPTION WINDING REF 2 --> 38 2UEW 0.15*1 1 0.025*8.5W 1 <-- <-- 38 2UEW 0.15*1 1 0.025*8.5W 1 --> 1 38 2UEW 0.15*1 1 0.025*8.5W 2 SH1 4 NC 7 2UEW 0.15*4 1 0.025*8.5W 2 S1 6 8 8 TEX-E 0.55*1 1 0.025*8.5W 2 11 2UEW 0.25*2 1 0.025*8.5W 2 1 2UEW 0.15*1 1 0.025*8.5W 2 P1 TYPE Bill of Materials WIDTH Rubcon P2 D1-D4 Diode,Rectifier,1000V/1A,1N4007, DO-41 Good-Ark D5,D6 Diode,Ultra Fast, FR107,1000V/1.0A, DO-41 Good-Ark SH2 D8 Diode, schottky, 40V/5A, SL540, DO-214AB,SMD Vishay L1 Axial Inductor, 1.5mH, 0410,Dip Q1 Transistor, HFE 20-25, NPN,13003,TO-126 Huawei PCB1 PCB, L*W*T=48.5x29x1.6mm,Cem-1,Rev:A Jintong FR1 Wire Round Resistor,1W,10 ohm,KNP, 5% TY-OHM R1 Chip Resistor, 22 ohm, 0603, 5% TY-OHM R2 Chip Resistor, 750K ohm, 1206, 5% TY-OHM R3 Chip Resistor, 470 ohm, 1206, 5% TY-OHM R4 Chip Resistor, 22 ohm, 0805, 5% TY-OHM R5 Chip Resistor, 68K ohm, 0805,1% TY-OHM R6 Chip Resistor, 11.8K ohm, 0805, 1% TY-OHM R7,R8 Chip Resistor, 10M ohm, 1206, 5% TY-OHM R9 Chip Resistor, 1 ohm, 1206,1% TY-OHM R10 Chip Resistor, 75K ohm, 0805, 5% TY-OHM R11 Chip Resistor, 3.3K ohm, 0805, 5% TY-OHM R13 Chip Resistor, 10 ohm, 0805, 5% TY-OHM T1 Transformer, Lp=1.5mH, EE13 (5) 4 3 (5) Core 1 Note: 1. Core and Bobbin: EE13 2. SH1 and SH2 are shielding; P1 & P2 are primary and S1 is secondary 3. Reverse the direction of bobbin when doing the S1 Amode Tech Typical performance characteristics Standby Power Standy Power (mW) Standby Power Vs Input Voltage 60 50 40 30 20 10 0 90 115 230 264 Input Voltage (VAC) Efficiency (24AWG,1.8m,R=0.308) Efficiency Vs Po Efficiency 80.00% Transformer Core(SH2) Pin1 Pin5 Pin3 Pin4 1 P1 10 2 NC 4 P2 8 SH1 3 NC Pin5 Pin1 S1 Core Pin1(SH2) P2 S1 SH1 2mm margin tape Pin10 Pin8 2mm margin tape 115V 78.00% 230V 76.00% 74.00% 72.00% 70.00% 25% Po 50% Po 75% Po 100% Po Output Power P1 Pin2 P2 5 Pin1 EVALUATION KITS ACT334_5V1A_DOE_Rev1.0 36 Low Cost ACT411 12V/1A Universal Adapter Input Voltage Device Vo Po Transformer Core Standby Power Efficiency Topology 90-264VAC ACT411 12V 12W EE16 90mW 82% QR flyback Description Key Features ACT411 is a high performance peak current mode PWM Advanced Quasi-Resonant mode operation. controller which applies ActivePSRTM and ActiveQRTM Advanced burst mode operation enables low standby power of 90mW . Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency and exceeds the latest ES2.0 efficiency standard with good margin. Integrated patented line and inductance compensation, provide accurate CC Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. technology. By applying frequency fold back and ActiveQRTM technology, ACT411 exceeds the latest ES2.0 efficiency standard. With Quasi-Resonant operation mode ACT411 can effectively improve efficiency, reduce the EMI noise and further reduce the components in input filter. Mini size W*L*H=30mm*52mm*16mm Schematic R12 3K F1 1A/250V C9 L L1 1.5mH D1-D4 1N4007*4 1000pF 22 R7 1.5M R3 100 C2 10F 400V C1 10F 400V N C3 1000pF R2 200K R13 L2 3H D8 SB5100 D5 RS1M C5 470F 16V R8 1.5M C6 470F 16V VO 12V1A R11 4.7K GND R16 2.2H D6 RS1M Q1 4N60 R9 1.0 T1 EE16 R4 22 R15 100 R17 470 3 D7 L4148 GATE 1 C8 0.1UF R14 100K CS U1 ACT411 US-T 6 COMP FB GND C10 220pF VDD 2 4 R1 51 R5 53.6K 5 C4 6.8uF 35V R6 9.31K CY1 1000pF 400Vac 37 Low Cost ACT411 12V/1A Universal Adapter Build Up REF DESCRIPTION MFTR U1 IC, ACT411,SOT23-6 Active-Semi. C1 Capacitor, Electrolytic, 10uF/400V, 10x16mm KSC C2 Capacitor, Electrolytic, 10uF/400V, 10x16mm KSC WINDING START FINISH TYPE SIZE*QTY Bill of Materials C3 Capacitor, Ceramic, 1000pF/500V, 0805,SMD POE P1 2 3 32 2UEW 0.21*1 1 0.025*11W 1 C4 Capacitor, Electrolytic,6.8uF/50V,5x11mm KSC SH1 5 NC 0.9 Copper 0.025 *10W 1 0.025*11W 2 C5,C6 Capacitor, Electrolytic, 470uF/16V, 8x11.5mm KSC S1 B-7 A-10 11 TEX-E 0.5*1 1 0.025*11W 2 C8 Capacitor, Ceramic, 0.1uF/25V, 0805,SMD POE P2 3 1 32 2UEW 0.21*1 1 0.025*11W 1 C9 Capacitor, Ceramic, 1000pF/100V, 0805,SMD POE SH2 5 NC 13 2UEW 0.15*3 1 0.025*11W 2 C10 Capacitor, Ceramic, 220pF/25V, 0805,SMD POE P3 4 5 12 2UEW 0.21*2 1 0.025*11W 2 CY1 Safety Y1,Capacitor,1000pF/400V,Dip UXT 3 0.1*1 1 0.025*11W 2 D1-D4 Diode,Rectifier,1000V/1A,1N4007, DO-41 Good-Ark Coopper wire D5 Fast Recovery Rectifier, RS1M,1000V/1.0A, SMA PANJIT D6 Fast Recovery Rectifier,RS1A,200V/1.0A,SMA PANJIT D7 Diode, 1N4148 SMD PANJIT D8 Diode, schottky, 100V/5A, SB5100, DO-201AB Diodes L1 Axial Inductor, 1.5mH, 5*7,Dip SoKa ITEM DESCRIPTION CONDITION LIMITS R16 SMD Inductor, 2.2H, 0805 SoKa 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac Q1 Mosfet Transistor, 4N60,TO-220 Infineon 2 P1 Inductance Inductance between pins 2 and 1 at 1Vac & 1kHz 0.39mH%7 PCB1 PCB, L*W*T=52x30x1.6mm,Cem-1,Rev:A Jintong 3 P1 Leakage Inductance Inductance between 2 pins 1 with pins 4-5 and A-B shorted 75H FR1 Fuse,1A/250V TY-OHM SH3 5 core LAYERS INSULATION LAYERS WIRE TURNS TERMINAL WIDTH Note: 1. Core and Bobbin: EE16 2. SH1,SH2, SH3 are shielding; P1, P2, P3 are primary and S1 is secondary Carbon Resistor, 200K ohm, 1206, 5% TY-OHM Chip Resistor, 100 ohm, 0805, 5% TY-OHM R1 Chip Resistor, 51 ohm, 0805, 5% TY-OHM R5 Chip Resistor, 53.6K ohm, 0805,1% TY-OHM R6 Chip Resistor, 9.31K ohm, 0805, 1% TY-OHM R7,R8 Chip Resistor, 1.5M ohm, 0805 , 5% TY-OHM R9 Chip Resistor, 1ohm, 1206,1% TY-OHM R12 Chip Resistor, 3K ohm, 0805, 5% TY-OHM R11 Chip Resistor, 4.7K ohm, 0805, 5% TY-OHM R4,R13 Chip Resistor, 22 ohm, 0805 , 5% TY-OHM R14 Chip Resistor, 100K ohm, 0805, 5% TY-OHM T1 Transformer, Lp=0.39mH, EE16 Electrical Specifications Typical performance characteristics Standby Power Standby Power Vs Input Voltage Standy Power mW) R2 R3,15 3. Reverse the direction of bobbin when doing the S1 100 80 60 40 20 0 90 Not defined P1 B-7 NC P3 P3 SH2 P2 S1 SH1 SH2 3 4 Core 4 3 NC 4 1 E 4 4 SH 1 E 2 P1 SH3 EVALUATION KITS ACT411_12V1A_Rev1.1 2mm Margi n tape A-10 B-7 Efficiency A-10 S1 2 264 Efficiency Vs Po 1 P2 230 Efficiency (24AWG,1.8m,R=0.308) Transformer E 115 Input Voltage (VAC) 88.00% 86.00% 84.00% 82.00% 80.00% 78.00% 76.00% 74.00% 72.00% 70.00% 68.00% 25% Po 115V 230V 50% Po 75% Po 100% Po Output Power 38 Low Cost ACT412 12V/0.4A Shaver Charger Input Voltage Device Vo Po Transformer Core Standby Power Efficiency Topology 90-264VAC ACT412 12V 6W EE16 94mW 77% QR flyback Description Key Features ACT412 is a high performance peak current mode PWM Constant power mode protection for small power motor application technology. By applying frequency fold back and Advanced Quasi-Resonant mode operation. ActiveQRTM technology, ACT412 exceeds the latest ES2.0 Advanced burst mode operation enables low standby power Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency and exceeds the latest ES2.0 efficiency standard with good margin. Integrated patented line compensation Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. controller which applies ActivePSRTM and ActiveQRTM efficiency standard. With Quasi-Resonant operation mode ACT412 can effectively improve efficiency, reduce the EMI noise and further reduce the components in input filter. Mini size W*L*H=30mm*52mm*16mm Schematic L1 FR1 1A/250V L T1 EE16 1.5mH R12 3K BD1 B6S C1 6.8uF 400V D2 RS1M C2 6.8uF 400V VO 12V0.4A D4 SB2B0 3 Gate CS 4 U1 ACT412 US-T 6 COMP C10 100PF 2 R11 6.8K GND R1 51 R5 45.3K VDD FB GND C6 330F 16V R4 22 R15 0 1 C7 330F 16V D3 RS1M Q1 4N60 R17 390 C8 R14 0.1UF 100K R13 1000pF 22 R3 100 R9 0.75 N R7 1.5M R8 1.5M C3 1000pF R2 750K C9 5 C4 4.7uF 35V R6 3.9K CY1 1000pF 400Vac 39 Low Cost ACT412 12V/0.4A Shaver Charger Build Up Bill of Materials REF DESCRIPTION MFTR U1 IC, ACT412,SOT23-6 Active-Semi. C1,C2 Capacitor, Electrolytic, 6.8uF/400V, 10x12mm KSC C3 Capacitor, Ceramic, 1000pF/500V, 0805,SMD POE 3 32 2UEW 0.21*1 1 0.025*11W 1 SH1 5 NC 0.9 Copper 0.025 *10W 1 0.025*11W 2 POE S1 B-7 A-10 12 TEX-E 0.45*1 1 0.025*11W 2 Capacitor, Ceramic, 100pF/25V, 0805,SMD POE P2 3 1 32 2UEW 0.21*1 1 0.025*11W 1 Safety Y1,Capacitor,1000pF/400V,Dip INC SH2 5 NC 13 2UEW 0.15*3 1 0.025*11W 2 D1-D4 Diode,Rectifier,1000V/1A,1N4007, DO-41 Good-Ark P3 4 5 17 2UEW 0.2*2 1 0.025*11W 2 D5 Fast Recovery Rectifier, RS1M,1000V/1.0A, RMA PANJIT D6 Fast Recovery Rectifier,RS1D,200V/1.0A,SMA PANJIT 3 Coopper wire 0.1*1 1 0.025*11W 2 KSC KSC C8 Capacitor, Ceramic, 0.1uF/25V, 0805,SMD POE C9 Capacitor, Ceramic, 1000pF/100V, 0805,SMD C10 CY1 SH3 D7 NC D8 Diode, schottky, 100V/2A, SB2100, DO-41 Good-Ark L1 Axial Inductor, 1.5mH, 5*7,Dip SoKa L2 Axial Inductor, 3uH, 0.55*5T, 5*7,Dip SoKa Q1 Mosfet Transistor, 4N60,TO-220 Infineon PCB1 PCB, L*W*T=52.2x30x1.6mm,Cem-1,Rev:A Jintong 5 core LAYERS SIZE*QTY 2 Capacitor, Electrolytic,4.7uF/35V,5x11mm Capacitor, Electrolytic, 330uF/16V, 8x11.5mm LAYERS TYPE P1 C4 C5,C6 TURNS FINISH INSULATION START WIRE WINDING TERMINAL WIDTH Note: 1. Core and Bobbin: EE16 2. SH1,SH2, SH3 are shielding; P1, P2, P3 are primary and S1 is secondary 3. Reverse the direction of bobbin when doing the S1 FR1 Fuse,1A/250V R1 Chip Resistor, 51 ohm, 0805, 5% R2 Carbon Resistor, 750K ohm, 1206, 5% TY-OHM TY-OHM TY-OHM R3 Chip Resistor, 100 ohm, 0805, 5% Chip Resistor, 22 ohm, 0805, 5% R5 Chip Resistor, 45.3K ohm, 0805,1% TY-OHM R6 Chip Resistor, 6.9K ohm, 0805, 1% TY-OHM R7,R8 Chip Resistor, 1.5M ohm, 0805 , 5% TY-OHM TY-OHM TY-OHM R9 Chip Resistor, 0.75ohm, 1206,1% R10 NC R11 Chip Resistor, 6.8K ohm, 0805, 5% R12 Chip Resistor, 3K ohm, 0805 , 5% TY-OHM R14 Chip Resistor, 100K ohm, 0805 , 5% TY-OHM DESCRIPTION CONDITION LIMITS 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac 2 P1 Inductance Inductance between pins 2 and 1 at 1Vac & 1kHz 0.45mH%7 3 P1 Leakage Inductance Inductance between 2 pins 1 with pins 4-5 and A-B shorted 75H Typical performance characteristics CC/CV Curve V-I Characteristic Vs Vin(25) Output Voltage(V) 16.00 TY-OHM Chip Resistor, 0 ohm, 0805, 5% R16 ITEM TY-OHM R4,R13 R15 Electrical Specifications TY-OHM NC R17 Chip Resistor, 390 ohm, 0805, 5% T1 Transformer, Lp=0.45mH, EE16 90V 14.00 115V 12.00 10.00 230V 8.00 264V 6.00 High limit 4.00 2.00 Low limit 0.00 0 TY-OHM B-7 NC P3 P3 SH2 P2 S1 SH1 SH2 4 5 Core 5 4 NC 5 1 3 5 5 SH 1 3 2 P1 SH3 2mm Margi n tape A-10 B-7 80.00% Efficiency A-10 2 1200 Efficiency Vs Po S1 P1 900 Efficiency 1 P2 600 Output Current(mA) Transformer 3 300 70.00% 115V 60.00% 230V 50.00% 40.00% 25% Po EVALUATION KITS ACT411_12V1A_Rev1.1 50% Po 75% Po 100% Po Output Power 40 Low Cost ACT413 5V/2.4A Universal Adapter Input Voltage Device Vo Po Transformer Core Standby Power Efficiency Topology 90-264VAC ACT413 5V 12W EPC17 80mW 78.44% QR flyback Description Key Features ACT413 is a high performance QR mode PWM control- Advanced Quasi-Resonant mode operation. ler. 6-pin tiny package, low standby power and exten- Advanced burst mode operation enables low standby power of 80mW . Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency and exceeds the latest ES2.0 efficiency standard with good margin. Integrated patented line and inductance compensation, provide accurate CC Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. sive protection features, upto 75kHz full load switching frequency make ACT413 the most attractive performance/cost adaptor solutions. Normal size W*L*H=33mm*52mm*16mm Schematic R12 3K F1 1A/250V C9 L CX1 NC BD1 B6S C1 10uF 400V N L1 22mH C3 1000pF R2 200K 1000pF 22 R7 1.5M R3 100 C2 10uF 400V R13 L2 3H D4 SB1045S D2 RS1M C6 820F 6.3V R8 1.5M VO 5V2.4A C7 820F 6.3V R11 1.2K GND D3 RS1M Q1 4N60 R9 1.0 T1 EPC17 R4 22 R15 100 R10 510 3 D5 L4148 GATE 1 C8 0.1UF R14 100K CS U1 ACT413 US-T 6 COMP FB GND C10 220pF VDD 2 4 R1 51 R5 51.1K 5 C4 6.8uF 35V R6 9.31K CY1 1000pF 400Vac 41 Low Cost ACT413 5V/2.4A Universal Adapter Build Up Capacitor, Electrolytic, 10uF/400V, 10x16mm KSC C2 Capacitor, Electrolytic, 10uF/400V, 10x16mm KSC C3 Capacitor, Ceramic, 1000pF/500V, 0805,SMD POE P1 2 E 38 2UEW 0.20*1 1 0.025*11W 1 SH1 4 NC 0.9 Copper 0.025 *10W 1 0.025*11W 2 S1 B-7 A-10 6 TEX-E 0.55*2 1 0.025*11W 2 LAYERS C1 SIZE*QTY Active-Semi. INSULATION TYPE IC, ACT413,SOT23-6 WIRE TURNS U1 TERMINAL FINISH MFTR START DESCRIPTION WINDING REF LAYERS Bill of Materials WIDTH C4 Capacitor, Electrolytic,6.8uF/50V,5x11mm KSC C6,C7 Capacitor, Solid, 820uF/6.3V, 8x12mm KSC C8 Capacitor, Ceramic, 0.1uF/25V, 0805,SMD POE P2 E 1 38 2UEW 0.20*1 1 0.025*11W 1 C9 Capacitor, Ceramic, 1000pF/50V, 0805,SMD POE SH2 4 NC 16 2UEW 0.15*3 1 0.025*11W 2 C10 Capacitor, Ceramic, 220pF/50V, 0805,SMD POE P3 3 4 17 2UEW 0.25*1 1 0.025*11W 2 3 Coopper wire 0.1*1 1 0.025*11W 2 CY1 Safety Y1,Capacitor,1000pF/400V,Dip UXT BD1 Diode,Rectifier,1000V/1A,MB6S, SOT-4 Good-Ark D2,3 Fast Recovery Rectifier, RS1M,1000V/1.0A, SMA PANJIT D4 Diode, schottky, SB1045S, 10A/45V, SMA Diodes D5 Diode, 1N4148 SMD PANJIT L1 CM Inductor, 22mH, EE01,Dip SoKa Q1 Mosfet Transistor, 4N60,TO-220 Infineon PCB1 PCB, L*W*T=52x33x1.6mm,Cem-1,Rev:A FR1 SH3 4 core Note: 1. Core and Bobbin: EPC17 2. SH1,SH2, SH3 are shielding; P1, P2, P3 are primary and S1 is secondary 3. Reverse the direction of bobbin when doing the S1 Electrical Specifications ITEM DESCRIPTION CONDITION LIMITS 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac Jintong 2 P1 Inductance Inductance between pins 2 and 1 at 1Vac & 1kHz 0.56mH%7 Fuse,1A/250V TY-OHM 3 P1 Leakage Inductance Inductance between 2 pins 1 with pins 3-4 and A-B shorted 75H R1 Chip Resistor, 51 ohm, 0805, 5% TY-OHM R2 Carbon Resistor, 200K ohm, 1206, 5% TY-OHM R3,15 Chip Resistor, 100 ohm, 0805, 5% TY-OHM R4,13 Chip Resistor, 22 ohm, 0805, 5% TY-OHM R5 Chip Resistor, 51.1K ohm, 0805,1% TY-OHM R6 Chip Resistor, 9.31K ohm, 0805, 1% TY-OHM R7,R8 Chip Resistor, 1.5M ohm, 0805 , 5% TY-OHM R9 Chip Resistor, 1ohm, 1206,1% TY-OHM R10 Chip Resistor, 510ohm, 0805 , 5% TY-OHM R11 Chip Resistor, 1.2K ohm, 0805, 5% TY-OHM R12 NC R14 Chip Resistor, 100K ohm, 0805, 5% TY-OHM T1 Transformer, Lp=0.56mH, EPC17 Not defined Typical performance characteristics Standby Power Standy Power mW) Standby Power Vs Input Voltage 100 80 60 40 20 0 90 115 Efficiency Vs Po A-10 S1 P1 B-7 2 NC P3 P3 SH2 P2 S1 SH1 SH2 3 4 Core 4 3 NC 4 1 E 4 SH 1 E 2 P1 2mm Margi n tape A-10 B-7 80.00% Efficiency 1 P2 264 Efficiency (24AWG,1.8m,R=0.308) Transformer E 230 Input Voltage (VAC) 70.00% 115V 60.00% 230V 50.00% 4 SH3 40.00% 25% Po EVALUATION KITS ACT413_5V2.4A_Rev1.1 50% Po 75% Po 100% Po Output Power 42 ACT510 5V/2A Universal Adaptor Input Voltage Device Standby Power Output Voltage Output Power Topology 90-264VAC ACT510 <100mW 5V 10W QR flyback Description Key Features ACT510 is a high performance QR mode PWM control- Optimized advanced Quasi-Resonant operation. ler. Very low standby power, extensive protection fea- Advanced burst mode operation enables low standby power of 100mW and can lower than 50mW with external circuit. Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency compared to conventional solutions and exceeds the latest ES2.0 efficiency standard with good margin. Integrated patented line and inductance compensation, provide high accurate OCP/OLP protection. Built-in Soft-Start and Fast-Start circuit to reduce Mosfet stress, output voltage rise time and output voltage overshoot. Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. tures, up to 125kHz full load switching frequency and excellent load transient response make ACT510 the very attractive solutions for small size, high performance chargers. Normal size W*L*H=29mm*53.5mm*20.5mm Schematic L1 1.5mH C1 10F 400V BD1 1A600V R17 2.2K R3 750k C2 15F 400V T1 EE16 C3 1000pF VO D3 SB1045S R1 1M Q1 4N65 3 4 GATE C6 330F 6.3V D2 1N4148 R2 1M R16 10 F1 1A 250Vac LF2 500uH L2 3uH R4 100 1 C5 1000pF/50V D4 RS1M R8 1.37 L R9 22 C7 820F 6.3V R5 22 R10 1K R11 1k R15 22 U2A R6 46.4K VDD GND R13 10.7k U1 5 ACT510US-T VDET SOT23-6 CS FB GND 6 2 C4 10F 35V U2B C8 0.1F 50V R7 9.1K R12 3k U3 TL431A C9 100pF 50V R14 10.5k CY1 1000pF 400Vac 43 N ACT510 5V/2A Universal Adaptor Build Up Bill of Materials Capacitor, Electrolytic, 15F/400V,12x16mm RUBYCON C3 Capacitor, Ceramic, 1000pF/500V, 0805,SMD POE C4 Capacitor, Electrolytic,10F/35V, 5x11mm POE C5 Capacitor, Ceramic,1000PF/100V, 0805,SMD POE C6 Capacitor, Electrolytic, 330F/6.3V, 6.3x8mm KSC C7 Capacitor, Electrolytic, 820F/6.3V, 6.5x15mm C8 C9 INSULATION 51 2UEW 0.27*1 2 0.025*11W SH1 NC 5 15 2UEW 0.15*3 1 0.025*11W KSC S1 7 10 5 TEX-E 0.55*2 1 0.025*11W 2 Capacitor, Ceramic, 0.33F/25V, 0805,SMD POE P2 4 5 11 2UEW 0.20*3 1 0.025*11W 2 Capacitor, Ceramic, 100pF/25V, 0805,SMD POE P1 3 1 30 2UEW 0.27*1 1 0.025*11W 2 C10 Capacitor, Ceramic, 10F/35V, 0805,SMD Open POE CY1 Safety Y1,Capacitor,1000pF/400V,Dip UXT SH2 5 NC 15 2UEW 0.15*3 1 0.025*11W 2 2 Copper wire 0.2*1 1 0.025*11W 2 Bridge Rectifier,D1010S,1000V/1.0A,SDIP PANJIT D2 Diode, Ultra Fast, LL4148, SMD ,75V/0.2A, PANJIT D3 Diode, Schottky, 45V/10A, S10U45S, SMD Diodes D4 Fast Recovery Rectifier, RS1M,1000V/1.0A, RMA PANJIT D5 Diode, Ultra Fast, LL4148, SMD Open Good-Ark L1 Axial Inductor, 1.5mH, 5*7,Dip SoKa L2 Axial Inductor, 0.55*5T, 5*7,Dip SoKa LF2 CM Filter,0.55*2/6T,R6K,Dip SoKa Q1 Mosfet Transistor, 4N65,TO-262 Infineon PCB PCB, L*W*T=53x29x1.6mm,Cem-1,Rev:A Jintong TY-OHM F1 Fuse,1A/250V Chip Resistor, 1.0M 1206, 5% R3 Carbon Resistor, 750k, 0805, 5% TY-OHM R4 Chip Resistor, 100, 0805, 5% TY-OHM R5,R9,R15 Chip Resistor, 22, 0805, 5% TY-OHM R6 Chip Resistor, 46.4 k, 0805,1% TY-OHM R7 Chip Resistor, 9.1k, 0805, 1% TY-OHM R8 Chip Resistor, 1.37,1206 , 1% TY-OHM R10 Chip Resistor, 200, 0805,5% TY-OHM R11 Chip Resistor, 1.5k, 0805, 5% TY-OHM R12 Chip Resistor, 3.3k, 0805, 5% TY-OHM R13 Chip Resistor, 10.7k, 0805, 1% TY-OHM R14 Chip Resistor, 10k, 0805, 1% TY-OHM R16 Chip Resistor, 10, 0805, 5% TY-OHM R17 Chip Resistor, 2.2k, 0805, 5% TY-OHM T1 Transformer, Lp=0.54mH, EE16 TY-OHM Active OPOT PC817C,CTR=200~300% Infineon IC3 TL431A TO-92 Infineon Transformer Core 10 SH2 P1 P1 2 S1 SH1 SH2 7 10 4 7 P2 2. SH1,SH2, SH3 are shielding; P1 & P2 are primary and S1 is secondary Electrical Specifications ITEM DESCRIPTION CONDITION LIMITS 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac 2 P1 Inductance Inductance between pins 1 and 2 at 1Vac & 1kHz 0.54mH%7 3 P1 Leakage Inductance Inductance between 1 pins 2 with pins 4-5 and 7-10 shorted 25H Typical performance characteristics Standby Power Standby Power Vs Input Voltage 150.00 100.00 50.00 0.00 85 115 230 264 Input Voltage (VAC) Efficiency P2 85.00% 80.00% 75.00% 230V NC Pin5 Pin1 Pin3 Pin5 Pin4 25% Po P1 Pin5 NC Pin3 Pin2 50% Po 75% Po 100% Po Output Power S1 SH1 115V 70.00% SH3 Co re wi th a c o p p e r wi re c o n n e c te d to p i n 5 3 5 2 Note: 1. Core and Bobbin: EE16 Efficiency IC, ACT510,SOT23-6 U2 P1 CORE WIDTH Efficiency Vs Po U1 1 SH3 Standy Power m(W) BD1 LAYERS 3 LAYERS 2 TURNS P1 R1,R2 5 WIRE SIZE*QTY C1 TERMINAL TYPE RUBYCON FINISH MFTR Capacitor, Electrolytic, 10F/400V, 12x16mm START DESCRIPTION C1 WINDING REF EVALUATION KITS ACT510_5V2A_Rev1.1 SH3 44 ACT512 5V/3A Universal Adaptor Low Profile Input Voltage Device Standby Power Output Voltage Output Power Topology 90-264VAC ACT512 <100mW 5V 15W CCM &QR flyback Description Key Features ACT512 is a high performance QR/CCM mode PWM Optimized CCM and advanced Quasi-Resonant operation. Advanced burst mode operation enables low standby power of 100mW and can lower than 50mW with external circuit. Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency compared to conventional solutions and exceeds the latest ES2.0 efficiency standard with good margin. Integrated patented line compensation, provide accurate OCP/OLP protection. Built-in Soft-Start and Fast-Start circuit to reduce Mosfet stress, output voltage rise time and output voltage overshoot. Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. controller. Low standby power and extensive protection features, up to 75kHz full load switching frequency and excellent load transient response make ACT512 the most attractive for general purpose adaptor solutions. Mini size W*L*H=38mm*38mm*22mm Schematic L1 1.5mH C1 10F 400V C2 10F 400V T 1 RM6 R13 750k C13 1000pF VO D 3 SBR3060S R 9 1.0 R1 1M Q1 4N60 F1 1A 250Vac 1N4 148 R14 360 4 GATE 1 R3 B 22 VDD GND FB 2 6 C7 680UF/ 6.3v GND R3 4.7 U1 5 ACT512US-T VDET SOT23-6 CS C 3 680F 6.3V D1 RS1M R2 1M 3 L C6 1000pF/ 100V D2 RS1M R12 100 BD1 1A600V R6 10 C4 6.8uF 35V R7 1K R8 1k IC3 R4 60.4K R10 10K . C0 0.1F 50V R5 10.2k R0 3k IC2 TL431A C5 100pF 50V R11 10Kk . CY1 1000pF 400Vac 45 N ACT512 5V/3A Universal Adaptor Low Profile Build Up Bill of Materials MFTR POE C3 Capacitor, Electrolytic, 680F/16V, 8 x 11mm KSC C4 Capacitor, Electrolytic,6.8F/35V, SMD 0805 KSC C5 Capacitor, Ceramic, 100PF/50V,0603,SMD POE C6 Capacitor, Ceramic,1000pF/100V,0603,SMD C7 Capacitor, Ceramic,470F/10V,1812,SMD C0 Capacitor, Ceramic,100nF/100V,0603,SMD C13 Capacitor, Ceramic,1000pF/500V,0805,SMD BD MB6S 1.5A/400V Good-Ark RS1M SMD Good-Ark Diode, Schottky, 60V/30A, SBR3060, DO-220 Good-Ark Diode L4148 SMD Good-Ark D1,D2 D3 Dgate L1 Axial Inductor, 1.5mH, 5*7, DIP Q1 Mosfet Transisor, 04N65, TO-220 PCB1 P1 2 F 32 2UEW 0.18*1 1 0.025*11W SH1 3 NC 15 2UEW 0.12*3 1 0.025*11W POE S1 B A 7 2UEW 0.45*2 1 0.025*11W 2 POE P2 4 3 17 2UEW 0.15*2 1 0.025*11W 2 P3 F 1 32 2UEW 0.18*1 1 0.025*11W 2 WIDTH 2 POE Note: 1. Core and Bobbin: EE16 2. SH1,SH2, SH3 are shielding; P1 & P2 are primary and S1 is secondary 3. Reverse the direction of the bobbin when doing the S1 Electrical Specifications SoKa ST PCB, L*W*T =38x38x1mm, Cem-1, Rev:A Jintong ITEM DESCRIPTION CONDITION LIMITS Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac F1 Fusible, 2A/250V TY-OHM 1 R1 Chip Resistor,1M , SMD 1206, 5% TY-OHM 2 P1 Inductance Inductance between pins 2 and 1 at 1Vac & 1kHz 0.8mH%7 R2 Chip Resistor,1M , SMD 1206, 5% TY-OHM 3 P1 Leakage Inductance Inductance between pins 3 with pins 4 and A-B shorted 75H Chip Resistor, 4.7, 0805, 5% TY-OHM Chip Resistor, 22, 0805, 5% TY-OHM R4 Chip Resistor,60.4k, 0603, 1% TY-OHM R5 Chip Resistor,10.2k, 0603, 1% TY-OHM R6 Chip Resistor, 10 , 0603, 5% TY-OHM R7 Chip Resistor, 1k,0603, 5% TY-OHM R8 Chip Resistor, 1K, 0603, 5% TY-OHM R0 Chip Resistor, 3k, 0603, 5% TY-OHM R9 Chip Resistor, 1.0, 1206, 1% TY-OHM R10,R11 Chip Resistor, 10k, 0603, 1% TY-OHM R12 Chip Resistor, 100, 0805,5% TY-OHM R13 Chip Resistor,750k, 0805,5% TY-OHM R14 Chip Resistor,360, 0603, 5% TY-OHM L1 RM6 lm=0.8mH ST CY1 Y capacitance, 1000pF/400V,Y1 SEC IC3 Opto-coupler, PC817C CTR=200 SMD IC2 Voltage Regulator, TL431A, Vref=2.5V TO-92 Typical performance characteristics Standby Power Standby Power Vs Input Voltage Standy Power (mW) R3 R3B S1 B Pin1 F Pin3 Pin4 ST P2 SH1 Pin3 F SH1 Pin2 P1 80.00% 115V 230V 75.00% 70.00% 65.00% 60.00% 25% Po P3 S1 4 P2 264 Efficiency P1 NC 230 85.00% P3 1 115 Efficiency Vs Po A F 90 Sharp Efficiency 2 120 100 80 60 40 20 0 Input Voltage (VAC) Transformer 3 LAYERS SIZE*QTY KSC Capacitor, Electrolytic, 10F/400V, 10 x 14mm INSULATION TYPE Capacitor, Electrolytic, 10F/400V, 10 x 14mm C2 WIRE FINISH C1 TERMINAL Active-Semi START IC, ACT512, SOT23-6 WINDING IC1 LAYERS DESCRIPTION TURNS REF B A NC 50% Po 75% Po 100% Po Output Power EVALUATION KITS ACT512_5V3A_Rev1.1 46 ACT512 12V/1A Universal Adaptor For DOE Standard Input Voltage Device Average Efficiency Standby Power Output Voltage Output Power Topology 90-264VAC ACT512 84.60% <100mW 12V 15W CCM &QR flyback Description Key Features ACT512 is a high performance QR/CCM mode PWM Optimized CCM and advanced Quasi-Resonant operation. Advanced burst mode operation enables low standby power of 100mW and can lower than 50mW with external circuit. Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency compared to conventional solutions and exceeds the latest DOE efficiency standard with good margin. Integrated patented line compensation, provide accurate OCP/OLP protection. Built-in Soft-Start and Fast-Start circuit to reduce Mosfet stress, output voltage rise time and output voltage overshoot. Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. controller. Low standby power and extensive protection features, up to 75kHz full load switching frequency and excellent load transient response make ACT512 the most attractive for general purpose adaptor solutions. Normal size W*L*H=41.5mm*57.5mm*25mm Schematic L1 UU9.8 30mH C1 22F 400V C3 R2 100k 1000pF D5 RS1M R3 100 D8 SB30100 R9 1.82 BD1 R7 1M Q1 4N65 Rgate 170 R18 NC R19 NC CX1 0.1uF 400V TVS 10471 F1 2A 250Vac NTC 5RS5C L R8 1M Dgate L4148 3 4 GATE 1 C9 1000pF/200V R13 10 Bead T3.5*9 R1 22 VDD V+ C5 470F 16V D6 RS1M C6 330F 16V GND R4 4.7 R5 57.6k R10 510 T1 EE22 Np:Ns:Na 96/15/16 Lp=2.4mH R12 3.3k U2A C8 0.1F 50V U1 5 ACT512US-T VDET SOT23-6 CS GND FB 2 6 R15 24.3k C4 4.7F 35V U2B Cfb 100pF 50V R6 10.7k R14 3.3k U3 TL431A CY1 2200pF 400Vac R16 6.19k 47 N ACT512 12V/1A Universal Adaptor For DOE Standard Build Up Bill of Materials MFTR KSC Capacitor, Ceramic,1000pF/1KV,DIP POE C4 Capacitor, Electrolytic,4.7F/35V,5*11mm C5 Capacitor, Solid, 470uF/16V, 10*16mm C6 Capacitor, Electrolytic,330uF/16V, 8*16mm KSC C8 Capacitor, Ceramic, 0.1F/50V,0805,SMD 4 48 2UEW 0.15*1 2 0.025*11W SH1 NC 2 0.9 copper 10mm 1 0.025*11W POE S1 B A 15 TEX-E 0.65*1 1 0.025*11W 2 P2 5 2 16 2UEW 0.15*2 1 0.025*11W 2 P3 4 3 48 2UEW 0.15*1 1 0.025*11W 2 SH2 core 2 3 wire 0.25*1 1 KSC C9 Capacitor, Ceramic,1000pF/100V,0805,SMD POE Capacitor, Ceramic,100pF/50V,0805,SMD POE BD1 GBL10 2A/600V 4Pin DIP Good-Ark D5 Diode, Ultra Fast, FR107,1000V/1.0A, DO-41 Good-Ark D6 RS1M SMD Good-Ark D8 Diode, Schottky, 100V/30A, SBR30100, DO-220 Diode L4148 SMD CM Inductor, 30mH, UU9.8 Mosfet Transisor, 04N65, TO-220 Infineon PCB, L*W*T =58x42x1.6mm, Cem-1, Rev:A Jintong F1 Fusible, 2A/250V TY-OHM R1 Chip Resistor,22 , SMD 0805, 5% TY-OHM R2 metal Resistor,100K ,DIP,1W,5% TY-OHM R3 Chip Resistor, 100, 0805, 5% TY-OHM R4 Chip Resistor,4.7, 0805, 5% TY-OHM R5 Chip Resistor,57.6k, 0805, 1% TY-OHM R6 Chip Resistor, 10.7K, 0805, 1% TY-OHM Chip Resistor, 1M, 5% TY-OHM R9 metal Resistor, 1.82, 1W, 1% TY-OHM R10 Chip Resistor, 510, 1/4W, 5% TY-OHM R12 Chip Resistor, 3.3K, 0805, 5% TY-OHM R13 Chip Resistor, 10, 0805, 5% TY-OHM R14 Chip Resistor,3.3K, 0805,5% TY-OHM R15 Chip Resistor,24.3k, 0805,1% TY-OHM R16 Chip Resistor,6.19K, 0805, 1% TY-OHM Chip Resistor,170, 0805, 5% TY-OHM Rgate ITEM DESCRIPTION CONDITION LIMITS 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac 2 P1 Inductance Inductance between pins 1 and 3 at 1Vac & 1kHz 2.4mH%7 3 P1 Leakage Inductance Inductance between pins 1 and 3 with pins 5-2 and A-B shorted 75H Typical performance characteristics Standby Power Standby Power Vs Input Voltage 100 50 0 90 115 230 264 Input Voltage (VAC) T1 EE22 lm=2.4mH X capacitance, 0.1F/400V,X1 SEC Efficiency (24AWG, 1.8M, R=0.380) NTC Thermistor, SC053 TY-OHM Efficiency Vs Po TVS Varistor, 10471 TY-OHM CY1 Y capacitance, 1000pF/400V,Y1 IC2 Opto-coupler, PC817C CTR=200 dip-4 IC3 Voltage Regulator, TL431A, Vref=2.5V TO-92 SEC 90.00% ST 85.00% Pin1 Pin2(SH2) P1 A P1 SH1 NC P2 S1 Pin3 Pin4 Pin2 Pin5 S1 B Pin2 NC Pin4 Pin1 80.00% 115V 75.00% 230V 70.00% 25% Po P1 P2 Efficiency Sharp Core 4 2 Electrical Specifications CX1 Core(SH2) 1 5 3. Reverse the direction of bobbin when doing the S1 SoKa Transformer 3 2. SH1 and SH2 are shielding; P1, P2, & P3 are primary and S1 is secondary Good-Ark L1 R7,R8 2 Note: 1. Core and Bobbin: EE16 Diodes Q1 PCB1 LAYERS 1 LAYERS P1 WIDTH Rubcon Cfb Dgate INSULATION SIZE*QTY Capacitor, Electrolytic, 22F/400V, 18 x 20mm C3 WIRE TYPE C1 TERMINAL FINISH Active-Semi START IC, ACT512, SOT23-6 WINDING IC1 TURNS DESCRIPTION Standy Power (mW) REF 50% Po 75% Po 100% Po Output Power A B SH1 P1 EVALUATION KITS ACT512_12V1A_DOE_Rev1.0 48 ACT512E 12V/1.5A Universal Adaptor For DOE Standard Input Voltage Device Average Efficiency Standby Power Output Voltage Output Power Topology 90-264VAC ACT512E 87% <75mW 12V 18W CCM &QR flyback Description Key Features ACT512E is a high performance QR/CCM mode PWM Optimized CCM and advanced Quasi-Resonant operation. Advanced burst mode operation enables low standby power of 75mW and can lower than 30mW with external circuit. Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency compared to conventional solutions and exceeds the latest DOE efficiency standard with good margin. Integrated patented line compensation, provide accurate OCP/OLP protection. Built-in Soft-Start and Fast-Start circuit to reduce Mosfet stress, output voltage rise time and output voltage overshoot. Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. controller. Low standby power and extensive protection features, up to 75kHz full load switching frequency and excellent load transient response make ACT512E the most attractive for general purpose adaptor solutions. Normal size W*L*H=40mm*67mm*24mm Schematic T 1 EF 20 R3 300k R C1A 10uF/ 400V C1 22F/ 400V D5 RS1 M VO R4 100 R RS 1.1KR Q1 4 N65 RX2 1.5MR F1 1A 250 Vac NTC CS 6 U2 B L R14 24. 3kR 5 C8 0. 1 F 50V FB GND 2 U2 A R7 33 k R VDD U1 ACT 512E VDET SOT23- 6 GND R17 1.5 K R R 11 3.6 kR 4 GATE 1 C 10 470 F 16V D6 RS1 M R15 51R 3 C9 470 F 16V R5 4. 7 R R 16 300 R RX1 1.5 MR CX1 0. 22 uF/ 250V D 8 SBR 2 0100S R6 1 .1 R R18 100R L1 12 mH D71 N4148 BD 1N 4007* 4 C5 1000pF/ 50V R 24 22R C3 1000pF C4 6. 8 uF 50V R8 R 12 33 kR U3 TL 431A 5.76kR C7 100pF 50V R19 6. 19k R CY1 1000 pF 49 N ACT512E 12V/1.5A Universal Adaptor For DOE Standard Build Up RUBYCON Capacitor, Electrolytic, 22uF/400V,15*18mm RUBYCON CX1 Capacitor, Electrolytic, 0.22uF/250Vac,X1cap KSC C3 Capacitor, Ceramic, 1000pF/500V, 0805,SMD POE C4 Capacitor, Electrolytic,4.7uF/50V, 5x11mm POE C5 Capacitor, Ceramic,1000PF/100V, 0805,SMD POE C9 Capacitor, Electrolytic, 470uF/16V, 6.3x15mm KSC C10 Capacitor, Electrolytic, 470uF/16V, 6.5x15mm KSC C8 Capacitor, Ceramic, 0.1uF/25V, 0805,SMD POE C7 Capacitor, Ceramic, 100pF/25V, 0805,SMD POE C12 Capacitor, Ceramic, 10uF/35V, 0805,SMD Open POE CY1 Safety Y1,Capacitor,1000pF/400V,Dip UXT BD1 1N4007,,1000V/1.0A,SDIP PANJIT Fast Recovery Rectifier, RS1M,1000V/1.0A, RMA PANJIT D5,D6 D7 Diode,Ultra Fast, LL4148, SMD D8 Diode, Schottky, 100V/20A, L1 Axial Inductor, 12mH, UU9.8,D=0.27mm,90T Q1 5 70 2UEW 0.3*1 2 0.025*11W 1 SH1 1 NC 1.1 copper 7mm width 1 0.025*11W 1 S1 9 10 14 TEX-E 0.65*1 1 0.025*11W 2 P2 4 1 16 2UEW 0.22*3 1 0.025*11W 2 P3 5 2 35 2UEW 0.3*1 1 0.025*11W 2 3 Copper wire 0.18*1 1 0.025*11W 2 CORE 1 2. SH1 and SH2 are shielding; P1, P2, & P3 are primary and S1 is secondary 3. Reverse the direction of bobbin when doing the S1 Electrical Specifications Diodes SoKa ITEM DESCRIPTION CONDITION LIMITS 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac 2 P1 Inductance Inductance between pins 2 and 3at 1Vac & 1kHz 1.65mH%7 3 P1 Leakage Inductance Inductance between pins 2 and 3 with pins 4-1 and 910 shorted 75H AUK Jintong Fuse,1A/250V TY-OHM Chip Resistor, 1.5Mohm, 0805, 1% TY-OHM Carbon Resistor, 300K ohm, 0805, 5% TY-OHM R4,R18 Chip Resistor, 100 ohm, 0805, 5% TY-OHM R5 Chip Resistor, 4.7 ohm, 0805, 5% TY-OHM R24 Chip Resistor, 22 ohm, 0805, 5% TY-OHM R7 Chip Resistor, 33K ohm, 0805,1% TY-OHM R8 Chip Resistor, 5.76K ohm, 0805, 1% TY-OHM R6 Chip Resistor, 1.1 ohm,1206 , 5% TY-OHM R17 Chip Resistor, 1.5Kohm, 0805,5% TY-OHM R16 Chip Resistor, 300 ohm, 0805, 5% TY-OHM R10 Chip Resisto,51 ohm, 0805, 5% TY-OHM R11 Chip Resistor, 3.6K ohm, 0805, 5% TY-OHM R12 Chip Resistor, 33K ohm, 0805, 5% TY-OHM R14 Chip Resistor, 24.3K ohm, 0805, 1% TY-OHM R19 Chip Resistor, 6.19K ohm, 0805, 1% TY-OHM Efficiency RS Chip Resistor, 1.1K ohm, 0805, 1% TY-OHM Efficiency Vs Po T1 Transformer, Lp=1.65mH, EF20 IC2 Opto-coupler, PC817C CTR=200 dip-4 IC3 Voltage Regulator, TL431A, Vref=2.5V TO-92 Typical performance characteristics Standby Power Standby Power Vs Input Voltage Standy Power (mW) R3 10 P1 3 NC 4 S1 2 5 1 4 SH1 P2 1 264 ST Pin1 P3 P2 SH1 10 9 NC 90.00% 80.00% 70.00% 60.00% 50.00% 40.00% 25% Po 115V 230V 50% Po 75% Po 100% Po Output Power 5 3 core 230 Sharp S1 9 115 Not defined core P3 5 90 Input Voltage (VAC) Transformer 2 100 80 60 40 20 0 Efficiency RX1,RX2 WIDTH Note: 1. Core and Bobbin: EF20 PCB, L*W*T=67x36x1.6mm,Cem-1,Rev:A F1 1 3 SH2 Good-Ark Mosfet Transistor, 4N65,TO-220 PCB1 P1 LAYERS Capacitor, Electrolytic,10uF/400V, 10x15mm INSULATION SIZE*QTY C1 C1A WIRE TYPE TERMINAL Active-Semi TURNS IC, ACT512E, SOT23-6 FINISH IC1 MFTR START DESCRIPTION WINDING REF LAYERS Bill of Materials P1 EVALUATION KITS ACT512E_12V1.5A_DOE_Rev1.0 50 ACT512E 12V/2A Universal Adaptor For DOE Standard Input Voltage Device Average Efficiency Standby Power Output Voltage Output Power Topology 90-264VAC ACT512E 89% <75mW 12V 24W CCM &QR flyback Description Key Features ACT512E is a high performance QR/CCM mode PWM Optimized CCM and advanced Quasi-Resonant operation. Advanced burst mode operation enables low standby power of 75mW and can lower than 30mW with external circuit. Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency compared to conventional solutions and exceeds the latest DOE efficiency standard with good margin. Integrated patented line compensation, provide accurate OCP/OLP protection. Built-in Soft-Start and Fast-Start circuit to reduce mosfet stress, output voltage rise time and output voltage overshoot. Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. controller. Low standby power and extensive protection features, up to 75kHz full load switching frequency and excellent load transient response make ACT512E the most attractive for general purpose adaptor solutions. Normal size W*L*H=40mm*68mm*26mm Schematic T1 EF25 R13 22 R2 C3 200k 1000pF D5 500V RS1M C1 47F 400V L2 10H R3 100 BD1 1N4007*4 C8 1000pF/100V D6 RS1M L1 UU9.8 10mH R17 100 3 R25 1.5M R26 1.5M CX1 0.1uF 400V F1 2A 250Vac TVS 10471 4 GATE 1 CS R12 3.3k U2A GND FB 6 C4 6.8F 35V U2B R15 24.3k C8 0.1F 50V 5 2 GND R10 1k Np/Ns/Na =80/13/15 Lp=1.8mH VDET C10 470pF 50V NTC 5RS5C R5 45.3k VDD U1 ACT512E SOT23-6 C6 470F 16V R4 22 R1 22 D9 1N4148 R18 510 VO C5 470F 16V Q1 7N60 R9 0.785 L3 100H D8 SB40100 R6 8.25k R14 3.3k U3 TL431A CY1 1000pF 400Vac R16 6.19k L 51 N ACT512E 12V/2A Universal Adaptor For DOE Standard Build Up MFTR CX1 X-Capacitor, 0.1uF/250Vac,X1cap C1 Capacitor, Electrolytic,47uF/400V, 14x16mm RUBYCON C3,C8 Capacitor, Ceramic, 1000pF/500V, 0805,SMD POE C4 Capacitor, Electrolytic,6.8uF/50V, 5x11mm KSC C5,C6 Capacitor, Electrolytic, 470uF/16V, 8x15mm KSC C10 Capacitor, Ceramic, 470pF/25V, 0805,SMD POE C7 Capacitor, Ceramic, 0.1uF/25V, 0805,SMD POE C9 NC C11,C12 NC. 1N4007,,1000V/1.0A,SDIP PANJIT Fast Recovery Rectifier, RS1M,1000V/1.0A, RMA PANJIT D9 Diode,Ultra Fast, LL4148, SMD D8 Diode, Schottky, 100V/40A, TO220AB 1 0.025*11W 2 SH1 2 NC 25 2UEW 0.15*4 1 0.025*11W 2 S1 7 8 13 TEX-E 0.75*1 1 0.025*11W 2 4 2 15 2UEW 1 0.025*11W 2 1 0.025*11W 2 2 NC 5 1 SoKa CM Inductor, 8 1*0.7T, 100uH, T8*4*2 SoKa Mosfet Transistor, 7N60,TO-220 Jintong Fuse,2A/250V TY-OHM NTC Thermal resistor, SC053 TY-OHM TVS Varistor, 10471 TY-OHM Chip Resistor, 22ohm, 0805, 5% TY-OHM TY-OHM Chip Resistor, 100 ohm, 0805, 5% TY-OHM R5 Chip Resistor, 45.3 ohm, 0805, 1% TY-OHM R6 Chip Resistor, 8.25 ohm, 0805, 1% TY-OHM DESCRIPTION CONDITION LIMITS 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac 2 P1 Inductance Inductance between pins 1 and 3at 1Vac & 1kHz 1.8mH%7 3 P1 Leakage Inductance Inductance between pins 1 and 3 with pins 4-2 and 8-7 shorted 75H Typical performance characteristics Standby Power NC Chip Resistor, 0.785 ohm, 1Ws, 1% TY-OHM R10 Chip Resistor, 1kohm,0805 , 5% TY-OHM Chip Resistor, 3.3K ohm, 0805,5% TY-OHM R15 Chip Resistor, 24.3K ohm, 0805, 1% TY-OHM R16 Chip Resistor,6.19 ohm, 0805, 1% TY-OHM R25,R26 Chip Resistor, 1.5Mohm, 0805, 5% TY-OHM R18 Chip Resistor, 510 ohm, 0805, 5% TY-OHM T1 Transformer, Lp=1.8mH, EF25, intensification core. Not defined H1 Heat radiation for Q1. Not defined H2 Heat radiation for D8. Not defined 150 120 90 60 30 0 90 115 230 264 Input Voltage (VAC) Efficiency Efficiency Vs Po 90.00% Efficiency R9 80.00% 70.00% 115V 60.00% 230V 50.00% Transformer 40.00% 25% Po 1 50% Po 75% Po 100% Po Output Power P1 5 8 P3 3 S1 NC NC SH2 SH1 7 P2 0.38*1 ITEM Standy Power mW) Carbon Resistor, 200K ohm, 1Ws, 5% 4 2UEW Standby Power Vs Input Voltage R3,R17 R12,R14 38 Electrical Specifications NC R7,R8 0.2*3 3. Reverse the direction of bobbin when doing the S1 AUK PCB, L*W*T=67x40x1.6mm,Cem-1,Rev:A R2 0.2*1 2. SH1 is shielding; P1, P2, & P3 are primary and S1 is secondary Diodes CM Inductor, 75 1*0.3T, 10mH, UU9.8 R11,R20 0.2*1 P2 Good-Ark L3 R1,R4,R13 2UEW SEC L1 F1 61 Note: 1. Core and Bobbin: EF25 intensification. BD1 PCB1 3 P1 Safety Y1,Capacitor,1000pF/400V,Dip Q1 2 WIDTH UXT CY1 D5,D6 P1 LAYERS ST SIZE*QTY ST TL431A TO-92 ref=2.5V INSULATION TYPE OPTO PC817A U3 WIRE TURNS U2 TERMINAL Active-Semi FINISH IC, ACT512E, SOT23-6 START DESCRIPTION U1 WINDING REF LAYERS Bill of Materials 1 5 2 2 4 P3 P2 S1 2 SH1 5 3 P1 A-8 B-7 EVALUATION KITS ACT512E_12V2A_DOE_Rev1.0 2 52 ACT512 15V/3A Universal Adaptor Input Voltage Device Standby Power Output Voltage Output Power Topology 90-264VAC ACT512 <150mW 15V 45W CCM &QR flyback Description Key Features ACT512 is a high performance QR/CCM mode PWM Optimized CCM and advanced Quasi-Resonant operation. Advanced burst mode operation enables low standby power of 100mW and can lower than 50mW with external circuit. Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency compared to conventional solutions and exceeds the latest ES2.0 efficiency standard with good margin. Integrated patented line compensation, provide accurate OCP/OLP protection. Built-in Soft-Start and Fast-Start circuit to reduce main external mosfet stress, output voltage rise time and output voltage overshoot. Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. Tiny SOT23-6 package. controller. Low standby power and extensive protection features, up to 75kHz full load switching frequency and excellent load transient response make ACT512 the most attractive for general purpose adaptor solutions. Normal size W*L*H=44mm*84mm*24mm Schematic T1 RM8 L1 UU10.5 30mH C1 100F 400V C3 R2 75k 1000pF D5 RS1M L2 3H R3 100 R7 1M Q1 7N65 Rgate 240 R18 NC R19 NC CX1 0.1uF 400V TVS 10471 F1 2A 250Vac NTC 5RS5C L R8 1M Dgate L4148 3 4 GATE 1 200H V+ 15V3A D8 SB20100 R9 0.45 BD1 C9 1000pF/100V R13 10 Bead T3.5*9 R1 22 VDD C5 820F 25V D6 RS1M C6 680F 25V GND R4 4.7 R10 680 R12 5.1k U2A R5 54.9k C8 0.1F 50V U1 5 CS ACT512US-T VDET SOT23-6 GND FB 2 6 R15 32.4k C4 6.8F 35V U2B Cfb 100pF 50V R6 11.7k R14 33k U3 TL431A CY1 2200pF 400Vac R16 6.34k 53 N ACT512 15V/3A Universal Adaptor Build Up KSC Capacitor, Ceramic,1000pF/1KV,DIP POE C4 Capacitor, Electrolytic,6.8F/35V,5*11mm KSC C5 Capacitor, Electrolytic, 820F/25V, 10*16mm POE C6 Capacitor, Electrolytic,680F/25V, 8*16mm POE C8 Capacitor, Ceramic, 0.1F/50V,0805,SMD POE C9 Capacitor, Ceramic,1000pF/100V,0805,SMD POE Cfb Capacitor, Ceramic,100pF/50V,0805,SMD POE BD1 GBL10 2A/600V 4Pin DIP Good-Ark D5 Diode, Ultra Fast, FR107,1000V/1.0A, DO-41 Good-Ark D6 RS1M SMD Good-Ark D8 Diode, Schottky, 100V/20A, SBR20100, DO-220 Good-Ark Dgate Diode L4148 SMD Good-Ark LF1 CM Inductor, 50mH, UU10.5 SoKa LF2 Axial Inductor, 0.55*5T, 5*7,Dip 200uH SoKa L2 DM Inductor, 3H, R5 SoKa Q1 Mosfet Transisor, 07N65, TO-220 ST PCB1 PCB, L*W*T =49x68x1.6mm, Cem-1, Rev:A Jintong F1 Fusible, 2A/250V TY-OHM R1 Chip Resistor,22 , SMD 0805, 5% TY-OHM R2 metal Resistor,100K ,DIP,1W,5% TY-OHM R3 Chip Resistor, 100, 0805, 5% TY-OHM R4 Chip Resistor,4.7, 0805, 5% TY-OHM R5 Chip Resistor,54.9k, 0805, 1% TY-OHM R6 Chip Resistor, 11.8K, 0805, 1% TY-OHM R7,R8 Chip Resistor, 1M, 5% TY-OHM R9 metal Resistor, 0.45, 1W, 1% TY-OHM R10 Chip Resistor, 510, 1/4W, 5% TY-OHM R12 Chip Resistor, 3.3K, 0805, 5% TY-OHM R13 Chip Resistor, 10, 0805, 5% TY-OHM R14 Chip Resistor,33K, 0805,5% TY-OHM R15 Chip Resistor,32.4k, 0805,1% TY-OHM R16 Chip Resistor,6.34K, 0805, 1% TY-OHM Rgate Chip Resistor,240, 0805, 5% TY-OHM ST T1 Rm8 lm=0.4mH CX1 X capacitance, 0.1F/400V,X1 NTC Thermistor, SC053 TY-OHM TVS Varistor, 10471 TY-OHM SEC Opto-coupler, PC817C CTR=200 dip-4 Sharp IC3 Voltage Regulator, TL431A, Vref=2.5V TO-92 ST 2 8 NC SH1 P2 2UEW 0.40*1 1 0.025*11W 2 SH1 1 NC 26 2UEW 0.15*2 1 0.025*11W S1 8 5 8 2UEW 0.50*2 1 0.025*11W 2 P2 3 1 7 2UEW 0.25*2 1 0.025*11W 2 P3 10 2 21 2UEW 0.40*1 1 0.025*11W 2 Electrical Specifications ITEM DESCRIPTION CONDITION LIMITS 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac 2 P1 Inductance Inductance between pins 11 and 2 at 1Vac & 1kHz 0.4mH%7 3 P1 Leakage Inductance Inductance between pins 11 and 1 with pins 5-8 and 3-1 shorted 40H Typical performance characteristics Standby Power Standby Power Vs Input Voltage 200 150 100 50 0 90 115 230 264 Input Voltage (VAC) Efficiency Vs Po 90.00% P2 Pin1 SH1 Pin10 Pin 11 P1 85.00% 80.00% 115V 230V 75.00% 70.00% 25% Po P3 S1 3 21 3. Reverse the direction of bobbin when doing the S1 P1 Pin 2 Pin10 Pin1 Pin3 10 2. SH1 is shielding; P1, P2, & P3 are primary and S1 is secondary 5 S1 11 Note: 1. Core and Bobbin: RM8 Transformer P3 P1 Efficiency Y capacitance, 1000pF/400V,Y1 IC2 10 WIDTH Efficiency (24AWG, 1.8M, R=0.380) CY1 11 INSULATION LAYERS Capacitor, Electrolytic, 100F/400V, 18 x 20mm C3 WIRE LAYERS C1 TERMINAL TYPE Active-Semi TURNS IC, ACT512, SOT23-6 FINISH IC1 START MFTR WINDING DESCRIPTION Standy Power (mW) REF SIZE*QTY Bill of Materials 50% Po 75% Po 100% Po Output Power 8 5 NC EVALUATION KITS ACT512_15V3A_Rev1.0 1 54 ACT518SH 5V/1.5A Universal Adaptor For DOE Standard Input Voltage Device Average Efficiency Standby Power Output Voltage Output Power Topology 90-264VAC ACT518SH 80.60% <100mW 5V 7.5W CCM &QR flyback Description Key Features ACT518SH which integrated 2N65 power mosfet is a Integrated power mosfet of 2N65. high performance QR/CCM mode PWM controller. Low Optimized CCM and advanced Quasi-Resonant operation. Advanced burst mode operation enables low standby power of 100mW and can lower than 50mW with external circuit. Frequency jittering and Quasi-Resonant technology to decrease EMI. Patented frequency foldback and ActiveQRTM technology increases the average system efficiency compared to conventional solutions and exceeds the latest ES2.0 efficiency standard with good margin. Integrated patented line compensation, provide accurate OCP/OLP protection. Built-in Soft-Start and Fast-Start circuit to reduce mosfet stress, output voltage rise time and output voltage overshoot. Integrate comprehensive protection. In case of over temperature, over/under voltage, short winding, short current sense resistor, open loop and overload protection. SOP-8 package. standby power and extensive protection features, up to 75kHz full load switching frequency and excellent load transient response make ACT518SH the most attractive for general purpose adaptor solutions. Normal size W*L*H=29mm*53.5mm*20.5mm Schematic EE16 BD1 C1 10F 400V L1 1.5mH R17 12k C2 10F 400V C3 1000pF R2 750k*2 R13 22 Bead T3.5*9 C9 1000pF/100V L2 10H R3 100 D4 RS1M R9 1.82 R7 1M F1 2A 250Vac R8 1M C5 680F 16V D2 RS1M 7,8 4 Drain 1 VDD U1 ACT518SH SOP-8 CS R1 51 R10 1k C8 0.1F 50V 3 2 C4 4.7uF 35V U2B C7 100pF 50V R14 6.34k R11 3.3k R5 80.6k VDET FB GND 5,6 C6 680F 16V GND R4 22 U2A L V+ D8 SB1045S R12 3.3k R6 16.5k CY1 1000pF 400Vac U3 TL431A R15 6.19k 55 N ACT518SH 5V/1.5A Universal Adaptor For DOE Standard Build Up Capacitor, Electrolytic,4.7uF/35V, 5x11mm POE C5 Capacitor, Electrolytic, 680uF/6.3V, 6.3x16mm KSC C6 Solid-state Capacitor, Electrolytic, 680uF/6.3V, 6.3x16mm KSC C7 Capacitor, Ceramic, 100pF/25V, 0805,SMD POE C8 Capacitor, Ceramic, 0.1uF/25V, 0805,SMD POE C9 Capacitor, Ceramic, 1000pF/25V, 0805,SMD POE CY1 Safety Y1,Capacitor,1000pF/400V,Dip UXT BD1 Diode Rectifier,MB6S POE Fast Recovery Rectifier, RS1M,1000V/1.0A, RMA PANJIT D8 Diode, Schottky, 40V/5A, S5476A, SMD Diodes L1 Axial Inductor, 1.5mH, 5*7,Dip L2 Axial Inductor, 3uH,0.55*5T, 5*7,Dip PCB1 SH1 5 NC 15 P1 1 2 2UEW 0.15*3 1 0.025*11W 1 102 2UEW 0.2*1 3 0.025*11W 1 Copper sheet 7.5mm 1 0.025*11W 2 LAYERS C4 SIZE*QTY POE INSULATION TYPE RUBYCON Capacitor, Ceramic, 1000pF/500V, 0805,SMD TURNS Capacitor, Electrolytic, 10uF/400V, 8x15mm C3 WIRE FINISH Active-Semi C1,C2 D2,D4 TERMINAL MFTR IC, ACT518SH, SOP-8 START DESCRIPTION IC1 WINDING REF LAYERS Bill of Materials WIDTH SH2 NC 5 0.9 S1 7 10 10 TEX-E 0.5*1 1 0.025*11W 2 Copper sheet 7.5mm 1 0.025*11W 2 0.2*1 1 0.025*11W 1 SH3 NC 5 0.9 P2 5 4 24 2UEW 3 Copper wire SH4 CORE 5 Note: 1. Core and Bobbin: EE16 2. SH1,SH2, SH3 are shielding; P1 & P2 are primary and S1 is secondary 3. Reverse the direction of the bobbin when doing the S1 SoKa SoKa PCB, L*W*T=54x29x1.6mm,Cem-1 Jintong F1 Fuse,1A/250V TY-OHM R1 Carbon Resistor, 51 ohm, 0805, 5% TY-OHM R2 Carbon Resistor, 750K*2 ohm, 0805, 5% TY-OHM R3 Chip Resistor, 100 ohm, 0805, 5% TY-OHM R4 Chip Resistor, 75ohm, 0805, 5% TY-OHM R5 Chip Resistor, 80.6K ohm, 0805,1% TY-OHM R6 Chip Resistor, 16.5K ohm, 0805,1% TY-OHM R7,R8 Chip Resistor, 1.0Mohm, 1206, 5% TY-OHM R9 Chip Resistor, 1.82 ohm,1206 , 1% TY-OHM R10 Chip Resistor, 1Kohm, 0805,5% TY-OHM R11 Chip Resistor, 3.3K ohm, 0805, 5% TY-OHM R12 Chip Resistor, 3.3K ohm, 0805, 5% TY-OHM R13 Chip Resistor, 22 ohm, 0805, 5% TY-OHM R14 Chip Resistor, 6.34K ohm, 0805, 1% TY-OHM R15 Chip Resistor, 6.19K ohm, 0805, 1% TY-OHM R17 Chip Resistor, 12Kohm, 0805, 5% TY-OHM T1 Transformer, Lp=1.5mH, EE16 TY-OHM U2 OPOT PC817C IC3 TL431 TO-92 Electrical Specifications ITEM DESCRIPTION CONDITION LIMITS 1 Electrical Strength 50Hz, 1 minute, from primary and secondary 3000 Vac 2 P1 Inductance Inductance between pins 2and 1at 1Vac & 1kHz 1.5mH%7 3 P1 Leakage Inductance Inductance between pins 4 with pins5and 7-10shorted 75H Typical performance characteristics Standby Power Sharp Efficiency ST Transformer 1 10 P1 2 S1 NC NC 2 SH3 SH2 SH1 5 NC 5 P2 SH3 5 S1 10 7 SH2 5 7 NC NC 4 P2 5 Core 1 SH4 5 P1 SH1 NC EVALUATION KITS ACT518SH_5V1.5A_Rev1.0 56 Power Management Units (PMU/PMICs) 57 PMU Product Selection Guide Applications Smartwatches, Wearables, POS, HMI, M2M & White Goods Smartphones & Tablets Automobile Black Box ACT88xx Family POWER MANAGER PART # I2C APPLICATION PROCESSORS STEP-DOWN LDO ACT8848 4 9 * TELECHIPS (TCC88xx) ACT8847 4 9 * FREESCALE (i.MX51, i.MX53) SAMSUNG (S5PC210, S5PV310) ACT8846 4 9 * ROCKCHIP (RK3066, RK3188) ACT8865 3 4 * ATMEL (SAMA5D[31/33/34/35/36], SAM9G[15/25/35/45/46], SAM9X[25/35], SAM9M[10/11], SAM9N[11/12]) ACT8899 3 4 * FREESCALE (i.MX51, i.MX53) ACT8898 3 4 * MARVELL (88AP166E, 88AP168) ACT8897 3 4 * SAMSUNG (S5PC100/110, S5PV210) ACT8896 3 4 * SAMSUNG (S3C6410) ACT8895 3 4 * SIRF (Atlas IV) ACT8894 3 4 * SAMSUNG (S3C2416/2440/2450) ACT8893 3 4 * CORELOGIC (Lucy) ACT8892 3 4 * TI (DM368) DaVinciTM Digital Video Processor Family ACT8891 3 4 * ROCKCHIP (RK2918, RK2928, RK2926) ACT8890 3 4 * Generic 58 PMU Product Selection Guide ACT89xx Family POWER MANAGER PART # CHARGER STEP-DOWN I2C APPLICATION PROCESSORS LDO ACT8945A ActivePathTM 3 4 * ATMEL (SAMA5D[31/33/34/35/36], SAM9G[15/25/35/45/46], SAM9X[25/35], SAM9M[10/11], SAM9N[11/12]) ACT8942 ActivePathTM 3 4 * AMLOGIC (AML8726-M3) ACT8939 ActivePathTM 3 4 * FREESCALE (i.MX51, i.MX53) ACT8938 ActivePathTM 3 4 * MARVELL (88AP166E, 88AP168) ACT8937A ActivePathTM 3 4 * SAMSUNG (S5PC100/110, S5PV210) ACT8936 ActivePathTM 3 4 * SAMSUNG (S3C6410) ACT8935 ActivePathTM 3 4 * SIRF (Atlas IV) ACT8934A ActivePathTM 3 4 * SAMSUNG (S3C2416/2440/2450) ACT8933 ActivePathTM 3 4 * CORELOGIC (Lucy) ACT8931A ActivePathTM 3 4 * ROCKCHIP (RK2918, RK2928, RK2926) ACT8930 ActivePathTM 3 4 * Generic PART NUMBER PROCESSOR ACT8600/ACT8601 Ingenic JZ4770/JZ4775/JZ4780/JZ4785 ACT8626/ACT8627 Amlogic AML8726-M3/AML8726-Mx ACT8931A Rockchip RK2918/RK/2926/RK2928/RK3026/RK3028 ACT8846 Rockchip RK3168/RK3188 ACT8840 CoreLogic Falcos ACT8847 Samsung Exynos 4210 ACT8847+ACT8849 Samsung Exynos 4412 ACT8865 Atmel SAMA5 Cotex-A5 Series and SAM9 Series ACT8945A Atmel SAMA5 Cotex-A5 Series and SAM9 Series 59 ACT8931A Application Circuit IC Features Complete System Power Management for Portable Applications TM ActivePath Li+ Charger and System Power Selection Three High-Efficiency Step-Down DC/DC Converters 1.1A, 1.1A, and 1.2A Four 320mA Low Noise, High PSRR LDOs Dynamic Voltage Scaling (DVS) Support 5mm x 5mm, Thin-QFN (TQFN55-40) Package ACT8846/ACT8847/ACT8849 IC Features Application Circuit Integrated Power Supply Four Step-Down DC/DC Converters 2.8A, 2.8A, 1.5A, 1.5A. Eight Low Noise, High PSRR LDOs 3 x 150mA, 5 x 320mA. One Low IQ Always-on LDOs Backup Battery Charger. System Control and Interface Four General Purpose I/O with PWM drivers 2 I CTM Serial Interface Interrupt Controller System Management Reset Interface and Sequencing Controller Watchdog Supervision Multiple Sleep Mode Thermal Management Subsystem Dynamic Voltage Scaling (DVS) Support 6mm x 6mm, TQFN66-48 Package 60 ACT8865 IC Features Application Circuit Features Three Step-Down DC/DC Converters Four Low -Dropout Linear Regulators Minimal External Components Tiny 4x4mm TQFN44-32 Package 0.75mm Package Height Power manager 2 I CTM Serial Interface for PMIC control Integrated Enable/Disable Sequencing Push Button for Power-Up/ Power-Down and Reset. System Voltage Monitor with programmable threshold Power Fail detector on each output channel Interrupt Output for Power Fail Conditions Interrupt Output line for Power fail conditions ACT8945A IC Features Application Circuit Features Three Step-Down DC/DC Converters Four Low-Dropout Linear Regulators Integrated ActivePathTM Charger Advanced Power Source Management Input Protection up to 12V Tiny 5x5mmTQFN55-40 Package Minimal External Components Power manager 2 I CTM Serial Interface for PMIC control Integrated Enable/Disable Sequencing Push Button for Power-Up/ Power-Down and Reset. System Voltage Monitor with programmable threshold Power Fail detector on each output channel Interrupt Output for Power Fail Conditions 61 Highly Intergrated Power Management Solutions Rockchip RK2918/RK2926/RK2928/RK3026/RK3028 Solution Description Application Diagram The ACT8931A is an advanced ActivePMUTM that was developed specifically for powering applications using high-performance processors, such as the Rockchip RK2918, RK2926, RK2928, RK3026 and RK3028. This device supplies all major power rails and interface signals required by the RK2918, RK2926, RK2928, RK3026 and RK3028 as well as an ActivePathTM charger, and a variety of features that greatly simplify the power management system design. Atmel SAMA5 Cotex-A5 and SAM9 Solution Description Application Diagram The ACT8865 is a complete, cost effective, highlyefficient ActivePMUTM power management solution, optimized for the unique power, voltage-sequencing, and control requirements of the Atmel SAMA5D3 series: SAMA5D[31/33/34/35/36] and SAM9 series: SAM9G[15/25/35/45/46], SAM9X[25/35], SAM9M[10/11], SAM9N[11/12] processors. It is ideal for a wide range of high performance portable handheld applications such as human-machine interfaces, control panels, smart grid infrastructures, network gateways, M2M systems, 2D barcode scanners, barcode printers, machine vision equipment, as well as home and commercial building automations, POS terminals, medical devices and white goods. 62 For complete list of Parts, Datasheets, EVKs and Applications info, visit www.active-semi.com Or write to sales@active-semi.com For latest news & product updates, follow us at www.facebook.com/activesemi www.twitter.com/activesemi1 www.linkedin.com/company/active-semi-international Active-Semi International, Inc. USA (Headquarters) Active-Semi, Inc. One Allen Center, 700 Central Expressway South Suite 330, Allen, TX, 75013, USA Tel: 1-214-453-1422 Fax: 1-214-383-4984 Shanghai Active-Semi (Shanghai) Co., Ltd. Rm 1202, Sunplus Building, No.1077 Zuchongzhi Road, Zhangjiang High Tech Park, Shanghai 201203, China Tel: 86-21-5108-2797 Fax: 86-21-5080-5687 Shenzhen Active-Semi (Shanghai) Co., Ltd. Shenzhen Branch Rm 1701, Central Business Buildings, 88 Fuhua First Road, Futian District, Shenzhen 518026, China Tel: 86-755-8203-2375 Fax: 86-755-8203-2073 Hong Kong Active-Semi Hong Kong Limited Unit 802B, 8th Floor, IC Development Centre, Hong Kong Science Park, Pak Shek Kok, Tai Po, New Territories, Hong Kong Tel: 852-2607-4399 Fax: 852-2607-4019 Taiwan Active-Semi International, Inc. Taiwan Branch 8F, No.115, Minchiuan Road, Shindian City, Taipei 23141 Tel: 886-2-2218-9898 Fax: 886-2-2218-5656 Korea Active-Semi International, Inc. Korea Branch Room 602, Samha Building, 145 Samsung-Dong, Kangnam-Ku, Seoul 135878, Korea Tel: 82-2-555-6886 Fax: 82-2-555-8765 www.active-semi.com For sales inquiry and info: sales@active-semi.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Active-Semi: ACT8849