5228686-1 - TE CONNECTIVITY

Twin BNC Connectors

Product Facts

■ Crimp connectors require

only one-stroke crimping of

both conductors, plus braid

and cable support

■ Lower installed cost with

one-stroke crimp

■ Reduced noise levels

because of Tyco Electronics

solderless crimping tech-

niques

■ Captive inner contact

stability

■ No danger of heat damage

to coaxial cable

■ Ease of inspection

■Listed under the Component

Program of Underwriters

Laboratories Inc.,

File No. E81956

■PC Board soldered connec-

tors are recognized under

the Component Program of

Underwriters

Laboratories Inc.,

File No. E81956

■Certified by Canadian

Standards

Association

File No. LR 7189

Electrical Characteristics

Nominal Impedance —Non-constant

Working Voltage —500 volts rms

sea level

Insulation Resistance —

5000 megohms min.

Dielectric Withstanding Voltage—

1500 volts rms sea level

Mechanical Characteristics

Mating/Unmating —

Bayonet lock-quick connect/ disconnect

Cable Attachment —Crimp type -

Simultaneous center and braid

Coupling Nut Retention —100 lbs.

[444 N] min.

Cable Retention —25 lbs.

[111 N] min., RG 108A/U cable

Durability —200 cycles per

MIL-C-39012

Environmental Characteristics

Temperature Range—

-55°C to +85°C

Vibration—MIL-STD-202,

Method 204, Condition B

Shock —MIL-STD-202, Method 213,

Condition I, 100 G’s

Salt Spray —MIL-STD-202,

Method 101, Condition B

Temperature Cycling—MIL-STD-

202, Method 102, Condition C

The Twin BNC Connector

is a quick connect/discon-

nect, weatherproof connec-

tor designed in accordance

with MIL-C-39012 to meet

the stringent requirements

of MIL-STD-1553 Multiplex

Data Bus.

These twin coaxial

cable connectors are a

unique development by

Tyco Electronics which has

resulted in the production of

high level RF components.

Termination of these con-

nectors to twin conductor

cable is made with

Tyco Electronics exclusive

one crimp method which

simultaneously terminates

inner conductors, outer

braid and cable support

with one stroke of the

matching Tyco Electronics

tool.

These rugged connectors

accommodate today’s most

commonly used twin con-

ductor cable sizes.

Materials

Brass —QQ-B-626

Beryllium Copper —QQ-C-530

PTFE —MIL-P-19468

Polypropylene —General purpose

Copper, Annealed —QQ-C-576

Phosphor Bronze —QQ-B-750

Silicone Rubber —ZZ-R-765

Plating

Silver—QQ-S-365

Nickel —QQ-N-290

Tin —ASTM-B-545

Packaging—All connectors are pack-

aged individually unless otherwise

noted.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Twin BNC Connectors (Continued)

Plugs

Bulkhead Jack

H= 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points

33.74 Max.

[1.328]

14.61 Dia.

[.575] Max.

38.1 Max.

[1.500]

11.05

[.435 ]

+0.13

-0.00

+.005

-.000

Maximum Panel Thickness 3.18 [.125]

Recommended Panel Cutout

RG/U Center Body Integral Die

Contact Dielectric

Cable Plating Plating Hand Tool Part No.

108, 108A Silver Silver

PTFE

69667 5332225

BELDEN 9272, 89272 Silver Nickel Polypropylene 69667 5332225-5

TROMPETER Silver Silver

PTFE

69667 5332225-3

TWC-124-2

ROLM 49D2401 Silver Nickel Polypropylene 69667 5332225-6

RAYCHEM 7824D013

CERTI-CRIMP Die Insert for

RG/U Center Body Hand Tool Integral Die Tools: Hand

Cable Contact Plating Dielectric with Hand Tool Tool-69710-1, Part No.

Plating Integral Die 626 Pneu. Head

318161-1

108, 108A Silver Silver

PTFE

-5—69667 69708 5332342

BELDEN 9272, 89272

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

BELDEN is a trademark of Belden Wire

and Cable Company.

ROLM is a trademark of the Rolm Corp.

TROMPETER is a trademark of

Trompeter Electronics, Inc.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Twin BNC Connectors (Continued)

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

Right-Angle

PC Board/

Panel Mount Jacks

Material

Body—VALOX, White

Center Contacts —Gold

Dielectric —Polymethylpentene

Vertical

PC Board/

Panel Mount Jacks

Material

Body—VALOX, White

Center Contacts —Gold

Dielectric —Polymethylpentene With Mounting Posts

Part No. 5221198-1

15.88 Mtg.

[.625] Hgt.

36.83 Max.

[1.450]

With Mounting Posts

Part No. 5228686-1

Maximum Panel Thickness 6.1 [.240]

Recommended Panel Cutout

2.01 ±0.05

[.079 ±.002]

(2 Holes)

Dia.

0.89 ±0.08

[.035 ±.003]

(3 Holes)

Dia.

Recommended PC Board Layout

Lockwasher and Jam Nut

Part No.

1-329632-2 Part No.

1-329631-2

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

6.35 ±0.08

[.250 ±.003]2.54 ±0.08

[.100 ±.003]

5.08 ±0.08

[.200 ±.003]

10.16 ±0.08

[.400 ±.003]

3.2 ±0.08

[.126 ±.003]

1.6 ±0.05

[.063 ±.002]

35.56

[1.400]

Mtg.

Hgt.

2.01 ±0.05

[.079 ±.002]

(2 Holes)

Dia.

0.89 ±0.05

[.035 ±.002]

(3 Holes)

Dia.

2.54 ±0.08

[.100 ±.003]

5.08 ±0.08

[.200 ±.003]

5.08 ±0.08

[.200 ±.003]

10.16 ±0.08

[.400 ±.003]

10.16 ±0.08

[.400 ±.003]

3.2 ±0.13

[.126 ±.005]

1.6 ±0.05

[.063 ±.002]

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.

VALOX is a trademark of General Electric

Company.

Catalog 1307191 Dimensions are in millimeters Dimensions are shown for USA: 1-800-522-6752 South America: 55-11-2103-6000

Revised 3-07 and inches unless otherwise reference purposes only. Canada: 1-905-470-4425 Hong Kong: 852-2735-1628

specified. Values in brackets Specifications subject Mexico: 01-800-733-8926 Japan: 81-44-844-8013

www.tycoelectronics.com are standard equivalents. to change. C. America: 52-55-1106-0803 UK: 44-8706-080-208

RF Coax Connectors

Twin BNC Connectors (Continued)

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

5.54

[.218 ]

+0.08

-0.00

+.003

-.000

H= 17.45 [.687] Max. across flats, 20.32 [.800] Max. across points

Part No. 5332215

Recommended Panel Cutout

35.72 Max.

[1.406]

Maximum Panel Thickness 3.18 [.125]

Bulkhead Jack

Adapter

Plating

Body—Silver

Center Contacts —Silver

Dia.

5.08 ±0.08

[.200 ±.003]

3.48 ±0.08

[.137 ±.003]

1.17 ±0.08

[.046 ±.003]

Dia.

0.89 ±0.05

[.035 ±.002]

2 Plcs.

Dia.

2.01 ±0.05

[.079 ±.002]

2 Plcs.

10.16 ±0.08

[.400 ±.003]

10.16 ±0.08

[.400 ±.003]

3.20 ±0.13

[.126 ±.005]

Part No. 5415832-1

Recommended Panel Cutout

Vertical

PC Board Mount

Jack

Plating

Body—Nickel

Center Contacts —Gold

Dielectric —Polymethylpentene

PCB Configuration

12.83

[.505 ]

+0.13

-0.00

+.005

-.000

Dia.

11.05 ±0.08

[.435 ±.003]

Note: Part Numbers are RoHS compliant except:Indicates non-RoHS compliant.