PL IA NT CO M *R oH S Features Applications Carbon element Insulated shaft Snap-in clip Center detent option Assorted pin layouts RoHS compliant* Audio/TV sets Car radio Amplifiers/mixers/drum machines/ synthesizers PCs/monitors Appliances PTV142B - 14 mm Dual Potentiometer Electrical Characteristics Taper ....................................Linear, audio Standard Resistance Range ........................1 K ohms to 1 M ohms Standard Resistance Tolerance ....20 % Residual Resistance ........................500 ohms or 1 % max. Environmental Characteristics Operating Temp. ..........-10 C to +50 C Power Rating ............................0.05 watt Maximum Operating Voltage ......50 V AC Sliding Noise ..............100 mV maximum Mechanical Characteristics Mechanical Angle ....................300 5 Rotational Torque ............20 to 200 g-cm Detent Torque ..................30 to 300 g-cm Stop Strength......................5 kg-cm min. Rotational Life ....................15,000 cycles Soldering Condition ............300 C max. within 3 seconds Hardware ................One flat washer and mounting nut supplied per potentiometer with bushing Product Dimensions PTV142B-4 No Bushing PTV142B-2 No Bushing L 8.2 (.322) F 1.5 (.059) 0.5 (.019) 2.0 0.15 (.078 .005) L 8.2 (.322) F 1.5 (.059) 0.5 (.019) 10.0 (.393) 3.5 (.137) +0 4.5 -0.5 +0 (.177-0.019 ) +0 6.0 -0.5 +0 (.236 -0.019 ) 2.0 (.078) 0.5 (.019) 10.0 (.393) +0 4.5 -0.5 +0 (.177-0.019 ) +0 6.0 -0.5 +0 (.236 -0.019 ) 3.2 (.125) 3.5 (.137) 6.1 (.240) 2.6 (.102) 0.5 (.019) 30 30 14.0 (.551) 14.0 (.551) 6.7 (.263) 6.7 (.263) 9.7 (.381) How To Order RECOMMENDED PCB LAYOUT PTV142B 2 0 E 1 20 A A 203 0.7 (.027) Model Pin Style * 2 = PC Pins vert./ Down Facing * 4 = PC Pins horz./ Rear Facing Center Detent Option * 0 = No Detent * 2 = Center Detent 16.1 (.633) DUMMY +0.1 2.0 -0.0 (.078 +0.0003 -0.0 ) 3.3 (.129) 4.0 (.157) 15.3 (.602) DUMMY 4.0 (.157) 8.0 (.314) +0.2 +0.1 14.3 (.562) 2.1 -0.0 (.082 +0.0003 -0.0 ) 8.0 12.0 (.314) (.472) Bushing Option * 0 = No Bushing * 1 = With Bushing (M9x0.75)x5 mm SHAFT SHOWN IN CCW POSITION +0.2 DIMENSIONS ARE: +0.1 2.1 -0.0 (.082 +0.0003 -0.0 ) SHAFT SHOWN IN CCW POSITION Shaft Styles * A = Flat Type Insulated Shaft Dimensions Without Bushing L Other styles available. F *RoHS Directive 2002/95/EC Jan 27 2003 including Annex. Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. 15 (.590) 4.5 (.177) 20 (.787) 7 (.275) 25 (.984) 12 (.472) 12.0 (.472) 1.0 -0.0 DIA. HOLES (.039 +0.0007 -0.0 ) 7 PLCS. 1.0 -0.0 DIA. HOLES 7 PLCS. (.039 +0.0007 -0.0 ) Standard Shaft Length * 15 = 15 mm * 20 = 20 mm * 25 = 25 mm Resistance Code (See Table) 11.0 (.433) RECOMMENDED PCB LAYOUT Electrical Diagram (See Diagram) * E = for Tone application * Y = for Volume application Resistance Taper * A = Audio Taper (5K to 1M available) * B = Linear Taper (1K to 1M available) +0.1 2.0 -0.0 (.078 +0.0003 -0.0 ) 13.5 (.531) MM (INCHES) PTV142B - 14 mm Dual Potentiometer Product Dimensions Electrical Diagrams PTV142B-4 With Bushing PTV142B-2 With Bushing 7.5 (.295) "E" FOR TONE APPLICATION L 5.0 (.196) F 1.5 (.059) 0.5 (.019) 2.0 (.078) 7.5 (.295) 3 3 L 5.0 (.196) F 1.5 (.059) 0.5 (.019) 2 2 10.0 (.393) 10.0 (.393) 1 1 2 2 3 3 M9x0.75 3.5 (.137) 3.3 (.129) 2.6 (.102) +0 +0 6.0 -0.5 +0 (.236 -0.019 ) 3.2 2.0 (.125) (.078) 3.5 (.137) 0.5 (.019) M9x0.75 +0 4.5 -0.5 +0 (.177-0.019 ) DUMMY 1 1 0.5 (.019) 4.5 -0.5 +0 (.177-0.019 ) +0 6.0 -0.5 +0 (.236 -0.019 ) 3.2 (.125) 'Y' FOR VOLUME APPLICATION 3 3 2 2 1 2 2 3 3 30 +0.0 8.0 -0.2 +0.0 (.314 -0.0007 ) 5.4 (.212) 14.0 (.551) DUMMY 30 1 14.0 (.551) 6.7 (.263) 8.0 (.314) 6.7 (.263) 10.9 (.429) 16.1 (.633) Resistance (Ohms) 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 8.0 (.314) 13.5 (.531) RECOMMENDED PCB LAYOUT +0.1 2.0 -0.0 (.078 +0.0003 -0.0 ) 11.0 (.433) RECOMMENDED PCB LAYOUT +0.1 3.3 (.129) Resistance Code 102 202 502 103 203 503 104 204 504 105 Derating Curve DUMMY 4.0 (.157) 14.3 (.562) DUMMY 4.0 (.157) 15.3 (.602) 8.0 12.0 (.314) (.472) 8.0 (.314) 12.0 (.472) +0.2 +0.1 2.1 -0.0 (.082 +0.0003 -0.0 ) 1.0 -0.0 DIA. HOLES (.039 +0.0007 -0.0 ) 7 PLCS. +0.2 1.0 -0.0 DIA. HOLES 7 PLCS. (.039 +0.0007 -0.0 ) SHAFT SHOWN IN CCW POSITION +0.1 2.1 -0.0 (.082 +0.0003 -0.0 ) DIMENSIONS ARE: SHAFT SHOWN IN CCW POSITION Rating Power Ratio (%) 2.0 -0.0 (.078 +0.0003 -0.0 ) DUMMY 1 Standard Resistance Table 9.7 (.381) 0.7 (.027) 1 100 80 60 40 33 20 0 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (C) MM (INCHES) Dimensions With Bushing L F 15 (.590) 7 (.275) 20 (.787) 12 (.472) 25 (.984) 12 (.472) REV. 05/09 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications.