MICRO SWITCHTM Premium Miniature Basic Switches V7 Series Datasheet MICRO SWITCHTM V7 Series Premium Miniature Basic Switches Honeywell's MICRO SWITCHTM V7 miniature switches are designed for long term-reliability in a rugged switch packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies. The V7 switch is available as a pin plunger style or with optional integral or auxiliary levers to actuate the switch and offer versatility in the application. The switch requires as little as 0,15 Newtons [approximately 1/2 ounce] to operate for extremely sensitive applications or an operating force of almost 4 Newtons [14 ounces] where higher forces are required. The V7 switch can reliably control logic level electrical loads from less than 0.1 A to power duty switching up to 25 A. Agency certifications for the MICRO SWITCHTM V7 switches are provided through CSA, ENEC, and UL for global use around the world. What makes our switches better? Certified with CSA, ENEC, and UL for global acceptability Reliable snap-spring mechanism with more than 60 years of proven service Available with pin plungers, integral levers (fitted two positions), or auxiliary levers to meet equipment requirements Electrical ratings from 0.1 A up to 25 A for design flexibility in one package size Big performance in a small package. COST OPTIMIZATION * RELIABILITY PERFORMANCE * GLOBAL ACCEPTANCE 2 sensing.honeywell.com Features and Benefits ACTUATION ON TIME MICRO SWITCHTM V7 Series basic switches operate with forces as low as 15 g and carry options to increase to 397 g, and can thereby easily accommodate different actuator mechanisms. Global acceptance: UL, CSA, ENEC RELIABLE PERFORMANCE IN HARSH CONDITIONS Switches feature industry-leading temperature ranges of -40 C to 175 C [-40 F to 347 F] to allow for years of reliable performance in harsh conditions. LONG LIFE CYCLE RATING The long life cycle rating (up to 10,000,000 cycles) reduces the need to replace switches over the life of OEM platform applications, therefore reducing total system cost. DESIGN FLEXIBILITY Available with pin plungers, integral levers (fitted 2 positions), and auxiliary levers to meet a variety of equipment requirements, MICRO SWITCHTM V7 Series switches also boast electrical ratings from 0.1 A up to 25 A for design flexibility in one package size. Potential Applications VENDING MACHINE MOTORS Switch controls motors or solenoids in vending machines for dispensing of product. MICROWAVE DOOR INTERLOCK Switch in door interlock of microwave that disconnects power if door opened. OVEN CLEANING LATCH Switch in door latch for oven clean operation. PRESSURE SWITCH ASSEMBLY Pressure switch senses incoming water pressure for power washer. sensing.honeywell.com 3 V7 Series PRODUCT NOMENCLATURE V7 -- Operating Force Switch TypeA V7 Series Miniature 1 1N 4 1 1 7 D8 Circuitry Code Mounting/ ConstructionD,F Termination Style C Electrical RatingC,F North Europe America (ENEC) (Inches) -- -- Lever StyleB Special Designator 150 g max. A 5A@ 125 Vac 3A 1 SPDT 3 150 C 2,9 mm [0.11 in] mtg. holes D8 0.187 x 0.02 quick connect 002 175 g max. B 11 A @ 125 Vac 10 A 2 SPNO 4 150 C 3,1 mm [0.12 in] mtg. holes E8 0.187 x 0.02 quick connect spread 022 Use only if this switch Straight 22,1 mm [0.87 in] has a special feature. Could be any number. Straight 35,6 mm [1.4 in] __ D9 0.250 x 0.032 quick connect 201 Roller 20,6 mm [0.81 in] E9 0.250 x 0.032 quick connect spread 207 Roller 34,0 mm [1.34 in] P02 Left angle PCB 263 Sim. roller 32,8 mm [1.29 in] P07 SPNO on edge PCB 266 Tall sim. roller 34,0 mm [1.34 in] 048 Straight 59,4 mm [2.34 in] 636 Paddle 139,5 mm [5.5 in] 1P 225 g max. CK 15 A @ 125 Vac 2G 75 g max. D 1A@ 125 Vac 1A 8 85 C 2,9 mm [0.11 in] mtg. holes 85 C 3,1 mm [0.12 in] mtg. holes 3H 50 g max. E 10 A @ 125 Vac 5A 9F 85 C 2,9 mm [0.11 in] mtg. holes 4I 25 g max. F 3A@ 125 Vac __ 0F 5J 15 g max. H No rating __ AE 6 6 oz to 14 oz max. K 22 A @ 125 Vac 20 A 7 8 oz max. SL 0.1 A @ 125 Vac 1A 9 300 g max. V 21 A @ 125 Vac 16 A WE,M 125 Vac 15.1 A @ __ XE,K 6A@ 125 Vac __ Z 25 A @ 125 Vac 20 A sensing.honeywell.com 3 O N L Y SPNC 7 85 C 3,1 mm [0.12 in] mtg. holes 177 C with 2,9 mm [0.11 in] mtg. holes Formed quick-connect terminals available Formed levers available NOTES: A Not all possible combinations are available, these are only guidelines B Lever length measured from center of back mounting hole to end of straight lever or center of roller C All ratings are UL/CSA, and where noted are also European-rated ENEC D Consider the temperature required and the mounting hole size when making this selection E Electric ratings "W" and "X" only used with "A" Mounting Construction and vice versa F European ENEC rating requires Mounting Construction code "9" or "0", and Electrical Ratings A,B,D,E,K,S,V,Z G Not applicable for Electrical Ratings C,K,V,W,X,Z H Not applicable for Electrical Ratings B,C,K,V,W,X,Z I Applies to Electrical Ratings A,D,F,S only J Applies to Electrical Ratings D,F,S only K Applies to 150 g Operate Force and higher L Applies to 15 g to 150 g Operate Force M Applies to only 300 g Operate Force N Applies to only Electrical Rating V P Applies to only Electrical Ratings K,Z MICRO SWITCHTM Premium Miniature Basic Switches Table 1. Specifications Characteristic Parameter Circuitry SPDT, SPNC, SPNO Operating force 0,25 N to 3,9 N [15 g to 397 g] Termination quick connect; 4,75 mm x 0,51 mm [0.187 in x 0.02 in] quick connect: 6,35 mm x 0,81 mm [0.25 in x 0.032 in] PCB (printed circuit board) Actuators pin plunger, integral lever options, auxiliary lever options Agency certification Operating temperature CSA, ENEC, UL; RoHS compliant -40 C to 85 C [-40 F to 185 F], options for 175 C [347 F] Mechanical life up to 10 million cycles Contact material silver, gold plated, gold alloy Housing material high strength thermoplastic Table 2. Electrical Ratings Rating code UL, CSA ENEC3 A 5 A 125 Vac, 250 Vac, 277 Vac 1/10 HP 250 Vac 3 (1) A, 250 Vac 2 B 11 A 1/3 HP 125 Vac, 250 Vac or 277 Vac 1/2 A 125 Vdc; 1/4 A 250 Vdc 4 A 125 Vac "L" 1 10 (3) A, 250 Vac 2 C 15.1 A 1/2 HP 125 Vac, 250 Vac or 277 Vac 1 /2A 125 Vdc 1/4 A 250 Vdc; 5 A 125 Vac "L" 1 - E 10 A 1/3 HP 125 Vac, 250 Vac or 277 Vac 1/2 A 125 Vdc 1/4 A 250 Vdc, 4 A 125 Vac "L" 1 5 (2) A, 250 Vac 2 F 3 A 125 Vac, 250 Vac, 277 Vac 1/10 HP 250 Vac - S 0.1 A, 125 Vac 1 (0.05) A, 250 Vac 2 V 21 A 1 HP 125 Vac, 250 Vac, 277 Vac 2 HP 250 Vac, 277 Vac 16 (4) A, 250 Vac 2 W 15.1 A 125 Vac, 250 Vac, 277 Vac - Z 25 A, 277 Vac 1 HP, 125 Vac; 2 HP, 250 Vac 20 (5) A, 250 Vac 2 Incandescent lamp rating XX(Y) - XX = max. rated resistive value in amps, and (Y) = max. rated inductive value in amps 3 European ENEC rating requires Mounting Construction code "9" or "0". See page four, Mounting Construction column 1 2 sensing.honeywell.com 5 V7 Series O.F. * R.F. * P.T. * O.T. * D.T. * O.P. * PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Catalog Listing Pin plunger Elect. Rating UL/CSA (CE) Elect. Rating Spec. Contacts O.F. max. newtons [grams] O.P. nominal mm [inches] P.T. max. mm [inches] O.T. min. mm [inches] D.T. mm [inches] (page 4) V7-2S17DB 0.1 A (---) S SPDT 0,79 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1S17D8 0.1 A (---) S SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-5F17D8 3 A (---) F SPDT 0,15 [15] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-4A17D8 5 A (---) A SPDT 0,25 [25] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-3E17D8 10 A (---) E SPDT 0,49 [50] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1B37D8 11 A (---) B SPNC 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-2B17D8 11 A (---) B SPDT 0,74 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-2B17E9 11 A (---) B SPDT 0,74 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-7B17D8 11 A (---) B SPDT 2,22 [227] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1C17D8 15 A (---) C SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1C17E9 15 A (---) C SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1C37B8 15 A (---) C SPNC 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1V19E9 21 A (16 A) V SPDT 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1V29E9 21 A (16 A) V SPNO 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1V39E9 21 A (16 A) V SPNC 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1Z19E9 25 A (20 A) Z SPDT 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1Z29E9 25 A (20 A) Z SPNO 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1Z20E9* 25 A (20 A) Z SPNO 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25 [0.002-0.010] V7-1C17D8-002 15 A (---) C SPDT 1,57 [160] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max. V7-1C17E9-002 15 A (---) C SPDT 1,57 [160] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max. V7-6C18D8-002* 15 A (---) C SPDT 4,05 [413] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max. BZ/BA Type Lever 22,1 mm [0.87 in] *3,1 mm mtg holes 6 Operating force Release force Pretravel Overtravel Differential travel Operating position sensing.honeywell.com MICRO SWITCHTM Premium Miniature Basic Switches PRODUCT SPECIFICATIONS AND LISTINGS Contact your Honeywell rep or distributor for additional listings Catalog Listing Lever 35,6 mm [1.40 in] Lever 59,4 mm [2.34 in] Lever Sim. Roll 32,8 mm [1.29 in] Lever, Roller 20,57 mm [0.81 in] Lever, Roller 34,04 mm [1.34 in] Elect. Rating UL/CSA (CE) Elect. Rating Spec. O.F. * R.F. * P.T. * O.T. * D.T. * O.P. * Operating force Release force Pretravel Overtravel Differential travel Operating position Contacts O.F. max. newtons [grams] O.P. nominal mm [inches] P.T. max. mm [inches] O.T. min. mm [inches] D.T. mm [inches] (page 4) V7-1S17D8-022 0.1 A (---) S SPDT 0,83 [85] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max. V7-3S17D8-022 0.1 A (---) S SPDT 0,29 [30] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max. V7-3S17E9-022 0.1 A (---) S SPDT 0,29 [30] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max. V7-1B17D8-022 11 A (---) B SPDT 0,80 [82] 15,3 [0.603] 3,04 [0.120] 1,70 [0.067] 0,69 [0.027] max. V7-1B19D8-022 11 A (10 A) B SPDT 0,80 [82] 15,3 [0.603] 3,25 [0.128] 1,78 [0.070] 0,71 [0.028] max. V7-2B17D8-022 11 A (---) B SPDT 0,40 [41] 15,3 [0.603] 3,04 [0.120] 1,70 [0.067] 0,71 [0.027] max. V7-6B19E9-022 11 A (10 A) B SPDT 2,11 [215] 15,2 [0.60] 3,25 [0.128] 1,35 [0.053] 0,76 [0.030] max. V7-3S17D8-048 0.1 A (---) S SPDT 0,16 [16] 15,3 [0.603] 5,97 [0.235] 3,00 [0.118] 1,27 [0.050] max. V7-2B17D8-048 11 A (---) B SPDT 0,20 [20] 15,3 [0.603] 5,97 [0.235] 2,92 [0.115] 1,27 [0.050] max. V7-1C17D8-048 15 A (---) C SPDT 0,44 [45] 15,2 [0.603] 5,94 [0.234] 4,19 [0.165] 1,52 [0.060] max. V7-1V19E9-048 21 A (16 A) V SPDT 0,54 [55] 15,4 [0.605] 6,35 [0.250] 3,05 [0.120] 1,40 [0.055] max. V7-9W1AE9-048** 15 A (---) W SPDT 0,88 [90] 15,2 [0.603] 6,35 [0.250] 3,15 [0.124] 1,37 [0.054] max. V7-1S17D8-263 0.1 A (---) S SPDT 0,88 [90] 18,54 [0.730] 2,79 [0.110] 1,90 [0.075] 0,76 [0.030] max. V7-3E19E9-263 10 A (5 A) E SPDT 0,32 [33] 18,54 [0.730] 2,54 [0.100] 1,90 [0.075] 0,76 [0.030] max. V7-1B17D8-263 11 A (---) B SPDT 0,88 [90] 18,54 [0.730] 2,79 [0.110] 1,52 [0.060] 0,76 [0.030] max. V7-1C17D8-263 15 A (---) C SPDT 0,89 [91] 18,54 [0.730] 2,79 [0.110] 1,55 [0.061] 0,61 [0.024] max. V7-1V29E9-263 21 A (16 A) V SPNO 1,08 [110] 18,49 [0.728] 2,90 [0.114] 1,62 [0.064] 0,64 [0.025] max. V7-1Z10E9-263* 25 A (20 A) Z SPDT 1,33 [136] 18,49 [0.728] 2,90 [0.114] 1,62 [0.064] 0,64 [0.025] max. V7-2S17D8-201 0.1 A (---) S SPDT 0,88 [90] 20,57 [0.810] 1,19 [0.047] 1,02 [0.040] 0,38 [0.015] max. V7-6B19E9-201 11 A (10 A) B SPDT 4,50 [459] 20,52 [0.808] 1,42 [0.056] 0,86 [0.034] 0,33 [0.013] max. V7-7B17D8-201 11 A (---) B SPDT 2,78 [283] 20,52 [0.808] 1,42 [0.056] 0,86 [0.034] 0,33 [0.013] max. V7-1C17D8-201 15 A (---) C SPDT 1,72 [175] 20,57 [0.810] 1,19 [0.047] 0,81 [0.032] 0.30 [0.012] max. V7-1S17D8-207 0.1 A (---) S SPDT 0,83 [85] 20,57 [0.810] 2,84 [0.112] 2,03 [0.080] 0,76 [0.030] max. V7-2A17D8-207 5 A (---) A SPDT 0,42 [43] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,64[0.025] max. V7-1B17D8-207 11 A (---) B SPDT 0,83 [85] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,76 [0.030] max. V7-1C17D8-207 15 A (---) C SPDT 0,88 [90] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,64[0.025] max. V7-1V19E9-207 21 A (16 A) V SPDT 0,98 [100] 20,52 [0.808] 3,07 [0.121] 1,65 [0.065] 0,76 [0.030] max. *3,1 mm mtg holes ** 177 C [350 F] sensing.honeywell.com 7 V7 Series AVAILABLE TERMINALS Quick Connect (QC) Printed Circuit Board (PO2) D8 Terminals: 0.187 in wide x 0.020 in thick. E8 Terminals: 0.187 in wide x 0.020 in thick. These terminals interface with snap-on receptacles and other components from AMPMODU interconnection system. E9 Terminals: 0.250 in wide x 0.032 in thick. STANDARD ACTUATOR OPTIONS 10,2 0.40 Roller Lever (-201) Straight Lever (-022) Roller Lever (-207) Straight Lever (-048) Simulated Roller Lever (-263) 6,4 0.25 20,2 0.80 2,8 0.11 2,8 00.11 1,0 .04 2,90 O hole (3,10/.122 option) 0.114 10,3 0.41 2,8 0.11 3,20 dia 0.126 3,46 0.134 opt 1,5 0.06 8,9 0.35 18,2 max. 0.72 NC COM 2,90 dia 0.114 3,10 0.122 opt Straight Lever (-002) NO 2,4 0.10 14,4 0.57 22,2 0.88 28,8 1.14 0,8 (3) 0.03 Straight lever (-022) ACCESSORIES 8 sensing.honeywell.com Part Number Description 15PA177-V7 Insulator packet: 500 pieces of 0,46 mm [0.018 in] thick varnished fiberglass 15PA260 Plunger boot seal: Elastomer, dust and splash resistant (Switch not included) ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: * Product installation instructions * Product range guide * Product nomenclature tree WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. * Product application-specific information - Application note: Electronic sensors and electromechanical switches in valves and flow meters - Application note: Electronic sensors and MICRO SWITCHTM switches in industrial air compressors - Application note: Sensors and switches for HVAC/R applications - Application note: Sensors and switches in oil rig applications - Application note: Sensors and switches in sanitary valves - Application note: Sensors and switches for valve monitors and valve indicators - Application note: Treadmill equipment WARNING MISUSE OF DOCUMENTATION * * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. - Application note: V7 available terminals WARRANTY/REMEDY - Technical bulletin: Applying precision switches Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. - Technical bulletin: Low energy switch guide Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. sensing and switching products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Productivity Solutions Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 004987-3-EN IL50 GLO October 2015 Copyright (c) 2015 Honeywell International Inc. All rights reserved.