WJLXT972ALC.A4-857341 - CORTINA SYSTEMS

MICRO SWITCH™ Premium

Miniature Basic Switches

V7 Series

Datasheet

2sensing.honeywell.com

What makes our switches better?

Certified with CSA, ENEC, and UL for global acceptability

Reliable snap-spring mechanism with more than 60 years of

proven service

Available with pin plungers, integral levers (fitted two posi-

tions), or auxiliary levers to meet equipment requirements

Electrical ratings from 0.1 A up to 25 A for

design flexibility in one package size

MICRO SWITCH™ V7 Series

Premium Miniature Basic Switches

Honeywell’s MICRO SWITCH™ V7 miniature switches are designed for long term-reliability in a rugged switch

packaged with a thermoplastic housing. These switches may be installed in a wide range of applications from simple

or precision on/off limits, presence/absence sensing, or embedded in pressure or temperature assemblies.

The V7 switch is available as a pin plunger style or with optional integral or auxiliary levers to actuate the switch and

offer versatility in the application. The switch requires as little as 0,15 Newtons [approximately ½ ounce] to operate

for extremely sensitive applications or an operating force of almost 4 Newtons [14 ounces] where higher forces are

required. The V7 switch can reliably control logic level electrical loads from less than 0.1 A to power duty switching up

to 25 A. Agency certications for the MICRO SWITCH™ V7 switches are provided through CSA, ENEC, and UL for

global use around the world.

COST OPTIMIZATION • RELIABILITY

PERFORMANCE • GLOBAL ACCEPTANCE

Big performance in a small package.

sensing.honeywell.com

Features

and Beneﬁts

Features

and Beneﬁts

ACTUATION ON TIME

MICRO SWITCH™ V7 Series basic switches operate with forces as low

as 15 g and carry options to increase to 397 g, and can thereby easily

accommodate different actuator mechanisms.

RELIABLE PERFORMANCE IN HARSH CONDITIONS

Switches feature industry-leading temperature ranges of -40 °C to 175 °C [-40

°F to 347 °F] to allow for years of reliable performance in harsh conditions.

LONG LIFE CYCLE RATING

The long life cycle rating (up to 10,000,000 cycles) reduces the need to replace

switches over the life of OEM platform applications, therefore reducing total system

cost.

DESIGN FLEXIBILITY

Available with pin plungers, integral levers (fitted 2 positions), and auxiliary levers to

meet a variety of equipment requirements, MICRO SWITCH™ V7 Series switches

also boast electrical ratings from 0.1 A up to 25 A for design flexibility in one

package size.

Global acceptance: UL, CSA, ENEC

VENDING MACHINE MOTORS

Switch controls motors or solenoids in vending machines for dispensing of product.

MICROWAVE DOOR INTERLOCK

Switch in door interlock of microwave that disconnects power if door opened.

OVEN CLEANING LATCH

Switch in door latch for oven clean operation.

PRESSURE SWITCH ASSEMBLY

Pressure switch senses incoming water pressure for power washer.

Potential Applications

4sensing.honeywell.com

V7 Series

PRODUCT NOMENCLATURE

Switch T

ypeAOperating

Force

Termination Style

(Inches)

D8 0.187 x 0.02

quick connect

0.250 x 0.032

quick connect

0.187 x 0.02

quick connect

spread

0.250 x 0.032

quick connect

spread

Left angle

PCB

SPNO on

edge PCB

NOTES:

A Not all possible combinations are available, these are only guidelines

B Lever length measured from center of back mounting hole to end of straight lever or center of roller

C All ratings are UL/CSA, and where noted are also European-rated ENEC

D Consider the temperature required and the mounting hole size when making this selection

E Electric ratings “W” and “X” only used with “A” Mounting Construction and vice versa

F European ENEC rating requires Mounting Construction code “9” or “0”, and Electrical Ratings A,B,D,E,K,S,V

G Not applicable for Electrical Ratings C,K,V,W,X,Z

H Not applicable for Electrical Ratings B,C,K,V,W,X,Z

I Applies to Electrical Ratings A,D,F,S only

J Applies to Electrical Ratings D,F,S only

K Applies to 150 g Operate Force and higher

L Applies to 15 g to 150 g Operate Force

M Applies to only 300 g Operate Force

N Applies to only Electrical Rating V

P Applies to only Electrical Ratings K,Z

Electrical RatingC,F

V7 Series

Miniature

SPNC

SPDT

SPNO

Circuitry

Code

Mounting/

ConstructionD,F

Use only if this switch

has a special feature.

Could be any number.

Special

Designator

P02

P07

022

201

002 Straight

22,1 mm [0.87 in]

207

263

266

048

636

150 °C

2,9 mm [0.11 in]

mtg. holes

85 °C

2,9 mm [0.11 in]

mtg. holes

85 °C

2,9 mm [0.11 in]

mtg. holes

85 °C

3,1 mm [0.12 in]

mtg. holes

85 °C

3,1 mm [0.12 in]

mtg. holes

177 °C with

2,9 mm [0.11 in]

mtg. holes

150 °C

3,1 mm [0.12 in]

mtg. holes

Lever

StyleB

5 A @

125 Vac3 A

11 A @

125 Vac10 A

1 A @

125 Vac1 A

10 A @

125 Vac5 A

3 A @

125 Vac

15 A @

125 Vac

rating

22 A @

125 Vac20 A

21 A @

125 Vac16 A

25 A @

125 Vac20 A

1 A

15.1 A @

125 Vac

6 A @

125 Vac

0.1 A @

125 Vac

WE,M

XE,K

150 g max.

175 g max.

225 g max.

75 g max.

50 g max.

25 g max.

15 g max.

66 oz to 14 oz

max.

8 oz max.

300 g max.

North

America

Europe

(ENEC)

Formed quick-connect

terminals available

Formed levers available

——

Straight

35,6 mm [1.4 in]

Roller

20,6 mm [0.81 in]

Roller

34,0 mm [1.34 in]

Sim. roller

32,8 mm [1.29 in]

Tall sim. roller

34,0 mm [1.34 in]

Straight

59,4 mm [2.34 in]

Paddle

139,5 mm [5.5 in]

—

sensing.honeywell.com

MICRO SWITCH™ Premium Miniature Basic Switches

Table 1. Specifications

Characteristic Parameter

Circuitry SPDT, SPNC, SPNO

Operating force 0,25 N to 3,9 N [15 g to 397 g]

Termination

quick connect; 4,75 mm x 0,51 mm [0.187 in x 0.02 in]

quick connect: 6,35 mm x 0,81 mm [0.25 in x 0.032 in]

PCB (printed circuit board)

Actuators pin plunger, integral lever options, auxiliary lever options

Agency certification CSA, ENEC, UL; RoHS compliant

Operating temperature -40 °C to 85 °C [-40 °F to 185 °F], options for 175 °C [347 °F]

Mechanical life up to 10 million cycles

Contact material silver, gold plated, gold alloy

Housing material high strength thermoplastic

Table 2. Electrical Ratings

Rating code UL, CSA ENEC3

A5 A 125 Vac, 250 Vac, 277 Vac

1/10 HP 250 Vac 3 (1) A, 250 Vac 2

11 A 1/3 HP 125 Vac, 250 Vac or 277 Vac

1/2 A 125 Vdc; 1/4 A 250 Vdc

4 A 125 Vac “L” 1

10 (3) A, 250 Vac 2

15.1 A 1/2 HP 125 Vac, 250 Vac or 277 Vac

1 /2A 125 Vdc

1/4 A 250 Vdc; 5 A 125 Vac “L” 1

–

10 A 1/3 HP 125 Vac, 250 Vac or 277 Vac

1/2 A 125 Vdc

1/4 A 250 Vdc, 4 A 125 Vac “L” 1

5 (2) A, 250 Vac 2

F3 A 125 Vac, 250 Vac, 277 Vac

1/10 HP 250 Vac –

S 0.1 A, 125 Vac 1 (0.05) A, 250 Vac 2

V21 A 1 HP 125 Vac, 250 Vac, 277 Vac

2 HP 250 Vac, 277 Vac 16 (4) A, 250 Vac 2

W 15.1 A 125 Vac, 250 Vac, 277 Vac –

Z25 A, 277 Vac

1 HP, 125 Vac; 2 HP, 250 Vac 20 (5) A, 250 Vac 2

1 Incandescent lamp rating

2 XX(Y) - XX = max. rated resistive value in amps, and (Y) = max. rated inductive value in amps

3 European ENEC rating requires Mounting Construction code “9” or “0”. See page four, Mounting Construction column

6sensing.honeywell.com

V7 Series O.F. • Operating force

R.F. • Release force

P.T. • Pretravel

O.T. • Overtravel

D.T. • Differential travel

O.P. • Operating position

PRODUCT SPECIFICATIONS AND LISTINGS

Contact your Honeywell rep or distributor for additional listings

Catalog Listing

Elect.

Rating

UL/CSA

(CE)

Elect.

Rating

Spec.

(page 4)

Contacts

O.F. max.

newtons

[grams]

O.P. nominal

mm [inches]

P.T. max.

[inches]

O.T. min.

[inches]

D.T.

mm [inches]

Pin plunger

BZ/BA Type

V7-2S17DB 0.1 A (---) S SPDT 0,79 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1S17D8 0.1 A (---) S SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-5F17D8 3 A (---) F SPDT 0,15 [15] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-4A17D8 5 A (---) A SPDT 0,25 [25] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-3E17D8 10 A (---) E SPDT 0,49 [50] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1B37D8 11 A (---) B SPNC 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-2B17D8 11 A (---) B SPDT 0,74 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-2B17E9 11 A (---) B SPDT 0,74 [75] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-7B17D8 11 A (---) B SPDT 2,22 [227] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1C17D8 15 A (---) C SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1C17E9 15 A (---) C SPDT 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1C37B8 15 A (---) C SPNC 1,47 [150] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1V19E9 21 A (16 A) V SPDT 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1V29E9 21 A (16 A) V SPNO 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1V39E9 21 A (16 A) V SPNC 1,72 [175] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1Z19E9 25 A (20 A) Z SPDT 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1Z29E9 25 A (20 A) Z SPNO 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

V7-1Z20E9* 25 A (20 A) Z SPNO 2,21 [225] 14,7 [0.578] 1,19 [0.047] 1,27 [0.050] 0,05 - 0,25

[0.002-0.010]

Lever

22,1 mm

[0.87 in]

V7-1C17D8-002 15 A (---) C SPDT 1,57 [160] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max.

V7-1C17E9-002 15 A (---) C SPDT 1,57 [160] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max.

V7-6C18D8-002* 15 A (---) C SPDT 4,05 [413] 15,2 [0.600] 1,52 [0.060] 0,89 [0.035] 0,36 [0.015] max.

*3,1 mm mtg holes

sensing.honeywell.com

MICRO SWITCH™ Premium Miniature Basic Switches O.F. • Operating force

R.F. • Release force

P.T. • Pretravel

O.T. • Overtravel

D.T. • Differential travel

O.P. • Operating position

Catalog Listing

Elect.

Rating

UL/CSA

(CE)

Elect.

Rating

Spec.

(page 4)

Contacts

O.F. max.

newtons

[grams]

O.P. nominal

mm [inches]

P.T. max.

[inches]

O.T. min.

[inches]

D.T.

mm [inches]

Lever

35,6 mm

[1.40 in]

V7-1S17D8-022 0.1 A (---) S SPDT 0,83 [85] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max.

V7-3S17D8-022 0.1 A (---) S SPDT 0,29 [30] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max.

V7-3S17E9-022 0.1 A (---) S SPDT 0,29 [30] 15,2 [0.60] 3,04 [0.120] 2,16 [0.085] 0,76 [0.030] max.

V7-1B17D8-022 11 A (---) B SPDT 0,80 [82] 15,3 [0.603] 3,04 [0.120] 1,70 [0.067] 0,69 [0.027] max.

V7-1B19D8-022 11 A (10 A) B SPDT 0,80 [82] 15,3 [0.603] 3,25 [0.128] 1,78 [0.070] 0,71 [0.028] max.

V7-2B17D8-022 11 A (---) B SPDT 0,40 [41] 15,3 [0.603] 3,04 [0.120] 1,70 [0.067] 0,71 [0.027] max.

V7-6B19E9-022 11 A (10 A) B SPDT 2,11 [215] 15,2 [0.60] 3,25 [0.128] 1,35 [0.053] 0,76 [0.030] max.

Lever

59,4 mm

[2.34 in]

V7-3S17D8-048 0.1 A (---) S SPDT 0,16 [16] 15,3 [0.603] 5,97 [0.235] 3,00 [0.118] 1,27 [0.050] max.

V7-2B17D8-048 11 A (---) B SPDT 0,20 [20] 15,3 [0.603] 5,97 [0.235] 2,92 [0.115] 1,27 [0.050] max.

V7-1C17D8-048 15 A (---) C SPDT 0,44 [45] 15,2 [0.603] 5,94 [0.234] 4,19 [0.165] 1,52 [0.060] max.

V7-1V19E9-048 21 A (16 A) V SPDT 0,54 [55] 15,4 [0.605] 6,35 [0.250] 3,05 [0.120] 1,40 [0.055] max.

V7-9W1AE9-048** 15 A (---) W SPDT 0,88 [90] 15,2 [0.603] 6,35 [0.250] 3,15 [0.124] 1,37 [0.054] max.

Lever Sim.

Roll 32,8 mm

[1.29 in]

V7-1S17D8-263 0.1 A (---) S SPDT 0,88 [90] 18,54 [0.730] 2,79 [0.110] 1,90 [0.075] 0,76 [0.030] max.

V7-3E19E9-263 10 A (5 A) E SPDT 0,32 [33] 18,54 [0.730] 2,54 [0.100] 1,90 [0.075] 0,76 [0.030] max.

V7-1B17D8-263 11 A (---) B SPDT 0,88 [90] 18,54 [0.730] 2,79 [0.110] 1,52 [0.060] 0,76 [0.030] max.

V7-1C17D8-263 15 A (---) C SPDT 0,89 [91] 18,54 [0.730] 2,79 [0.110] 1,55 [0.061] 0,61 [0.024] max.

V7-1V29E9-263 21 A (16 A) V SPNO 1,08 [110] 18,49 [0.728] 2,90 [0.114] 1,62 [0.064] 0,64 [0.025] max.

V7-1Z10E9-263* 25 A (20 A) Z SPDT 1,33 [136] 18,49 [0.728] 2,90 [0.114] 1,62 [0.064] 0,64 [0.025] max.

Lever, Roller

20,57 mm

[0.81 in]

V7-2S17D8-201 0.1 A (---) S SPDT 0,88 [90] 20,57 [0.810] 1,19 [0.047] 1,02 [0.040] 0,38 [0.015] max.

V7-6B19E9-201 11 A (10 A) B SPDT 4,50 [459] 20,52 [0.808] 1,42 [0.056] 0,86 [0.034] 0,33 [0.013] max.

V7-7B17D8-201 11 A (---) B SPDT 2,78 [283] 20,52 [0.808] 1,42 [0.056] 0,86 [0.034] 0,33 [0.013] max.

V7-1C17D8-201 15 A (---) C SPDT 1,72 [175] 20,57 [0.810] 1,19 [0.047] 0,81 [0.032] 0.30 [0.012] max.

Lever, Roller

34,04 mm

[1.34 in]

V7-1S17D8-207 0.1 A (---) S SPDT 0,83 [85] 20,57 [0.810] 2,84 [0.112] 2,03 [0.080] 0,76 [0.030] max.

V7-2A17D8-207 5 A (---) A SPDT 0,42 [43] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,64[0.025] max.

V7-1B17D8-207 11 A (---) B SPDT 0,83 [85] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,76 [0.030] max.

V7-1C17D8-207 15 A (---) C SPDT 0,88 [90] 20,57 [0.810] 2,92 [0.115] 1,52 [0.060] 0,64[0.025] max.

V7-1V19E9-207 21 A (16 A) V SPDT 0,98 [100] 20,52 [0.808] 3,07 [0.121] 1,65 [0.065] 0,76 [0.030] max.

*3,1 mm mtg holes

** 177 °C [350 °F]

PRODUCT SPECIFICATIONS AND LISTINGS

Contact your Honeywell rep or distributor for additional listings

8sensing.honeywell.com

V7 Series

STANDARD ACTUATOR OPTIONS

Straight Lever (-002) Roller Lever (-201)

10,2

0.40 6,4

0.25

COM

2,8

0.11

1,5

0.06

8,9

0.35

0,8

0.03

2,4

0.10

14,4

0.57

22,2

0.88

28,8

1.14

3,20

0.126

3,46

0.134

opt

18,2

0.72

(3)

dia

3,10

0.122

opt

2,90

0.114

10,3

0.41

dia

20,2

0.80

2,8

00.11

2,8

0.11

1,0

.04

2,90

0.114 Ø hole (3,10/.122 option)

max.

Straight lever (-022)

Straight Lever (-022) Roller Lever (-207)

Straight Lever (-048) Simulated Roller Lever (-263)

ACCESSORIES

Part Number Description

15PA177-V7 Insulator packet: 500 pieces of 0,46 mm [0.018 in] thick varnished fiberglass

15PA260 Plunger boot seal: Elastomer, dust and splash resistant

(Switch not included)

AVAILABLE TERMINALS

Quick Connect (QC)

D8 Terminals: 0.187 in wide x 0.020 in thick.

E8 Terminals: 0.187 in wide x 0.020 in thick.

E9 Terminals: 0.250 in wide x 0.032 in thick.

Printed Circuit Board (PO2)

These terminals interface with snap-on receptacles and other

components from AMPMODU interconnection system.

004987-3-EN IL50 GLO

October 2015

Sensing and Productivity Solutions

Honeywell

1985 Douglas Drive North

Golden Valley, MN 55422

honeywell.com

Find out more

Honeywell serves its customers

through a worldwide network

of sales offices, representatives

and distributors. For application

assistance, current specifications,

pricing or name of the nearest

Authorized Distributor, contact

your local sales office.

To learn more about Honeywell’s

sensing and switching products,

call +1-815-235-6847 or

1-800-537-6945,

visit sensing.honeywell.com,

or e-mail inquiries to

info.sc@honeywell.com

ADDITIONAL INFORMATION

The following associated literature is available on the Honeywell web

site at sensing.honeywell.com:

• Product installation instructions

• Product range guide

• Product nomenclature tree

• Product application-specific information

– Application note: Electronic sensors and electromechanical

switches in valves and flow meters

– Application note: Electronic sensors and MICRO SWITCH ™

switches in industrial air compressors

– Application note: Sensors and switches for HVAC/R

applications

– Application note: Sensors and switches in oil rig applications

– Application note: Sensors and switches in sanitary valves

– Application note: Sensors and switches for valve monitors and

valve indicators

– Application note: Treadmill equipment

– Application note: V7 available terminals

– Technical bulletin: Applying precision switches

– Technical bulletin: Low energy switch guide

WARNING

PERSONAL INJURY

DO NOT USE these products as safety or emergency stop

devices or in any other application where failure of the

product could result in personal injury.

Failure to comply with these instructions could result in

death or serious injury.

WARNING

MISUSE OF DOCUMENTATION

• The information presented in this product sheet is for

reference only. Do not use this document as a product

installation guide.

• Complete installation, operation, and maintenance

information is provided in the instructions supplied with

each product.

Failure to comply with these instructions could result in

death or serious injury.

WARRANTY/REMEDY

Honeywell warrants goods of its manufacture as being free of

defective materials and faulty workmanship. Honeywell’s standard

product warranty applies unless agreed to otherwise by Honeywell

in writing; please refer to your order acknowledgement or consult

your local sales office for specific warranty details. If warranted

goods are returned to Honeywell during the period of coverage,

Honeywell will repair or replace, at its option, without charge those

items it finds defective. The foregoing is buyer’s sole remedy

and is in lieu of all other warranties, expressed or implied,

including those of merchantability and fitness for a particu-

lar purpose. In no event shall Honeywell be liable for conse-

quential, special, or indirect damages.

While we provide application assistance personally, through our

literature and the Honeywell website, it is up to the customer to

determine the suitability of the product in the application.

Specifications may change without notice. The information we

supply is believed to be accurate and reliable as of this printing.

However, we assume no responsibility for its use.