Philips Components Product specification Class 2, 500 V (DC) (flanged types) Miniature ceramic plate capacitors FEATURES * Professional circuits QUICK REFERENCE DATA DESCRIPTION VALUE * Coupling and decoupling Capacitance range (E12 series) 100 to 4700 pF * Space saving Dielectric material K2000 * High reliability Rated DC voltage 500 V * High temperature circuits. Tolerance on capacitance 10% Sectional specification IEC 384-9 (2C2 and 2D1) EIA (X5S/X8U) Climatic category (IEC 68) 55/150/56 APPLICATIONS In electronic circuits where non-linear change of capacitance with temperature is permissible and low losses are not essential, e.g. coupling and decoupling. Because of their small size, the capacitors are ideal for circuitry with high component density. DESCRIPTION The capacitors consist of a thin rectangular ceramic plate, both sides of which are metallized. The tinned connecting leads are secured using a high melting point solder. The capacitors are encapsulated in epoxy lacquer, which is resistant to all commonly used cleaning solvents. They have small dimensions and narrow tolerances on the lead spacing. The leads are provided with a flange. The flange guarantees that the leads are free of lacquer, and its shape allows soldering gasses to escape freely, ensuring excellent solderability. This makes the capacitors suitable for both hand-mounting and automatic insertion. 1997 Nov 04 MAM035 Fig.1 Outlines. 217 Philips Components Product specification Class 2, 500 V (DC) (flanged types) Miniature ceramic plate capacitors MECHANICAL DATA W 0.6 5.08 handbook, halfpage H 0.05 0.03 0 0.25 0.03 0.2 L MSA534 - 1 1.4 MSA531 5.08 0.5 0.1 0.2 0 0.4 1.0 0.1 0.06 O 0.6 0.05 Dimensions in mm. For dimensions H, L and W see Tables 1 and 2. Dimensions in mm. Fig.2 Component outline. Fig.3 Detail of flange. Marking Physical dimensions The body of the capacitors is tan coloured. The temperature dependence is indicated by a yellow coloured cap. Capacitance value and voltage are indicated by a marking code in a contrasting colour on the body. Refer to Table 3 for marking codes. Table 1 Mounting When bending, cutting or flattening, the leads should be relieved of the applied load by supporting them at the capacitor body. SIZE(1) W(2) (mm) H(2) (mm) MASS (g) I 3.6 (-1.1) 6.3 (-1.8) 0.14 IIA 3.9 (-1.4) 6.7 (-2.0) 0.15 IIB 4.5 (-1.8) 7.3 (-2.4) 0.15 III 5.3 (-1.8) 8.1 (-2.6) 0.17 IV 6.2 (-2.0) 9.0 (-2.7) 0.20 V 6.2 (-2.0) 11.2 (-3.1) 0.23 Soldering conditions: max. 265 C, max. 10 s. The capacitors are suitable for mounting on printed-circuit boards (hand-mounting or automatic insertion). 1997 Nov 04 Capacitor dimensions and mass Notes 1. Unless indicated in Table 3 the thickness of the capacitors does not exceed 2.3 mm. 2. Tolerances are given between parentheses. 218 Philips Components Product specification Class 2, 500 V (DC) (flanged types) Miniature ceramic plate capacitors PACKAGING For details refer to this handbook, Chapter "Miniature ceramic plate capacitors", Section "General data". ORDERING INFORMATION Table 2 Catalogue numbers PITCH P 5.08 mm (0.2 inch) LEAD DIAMETER d 0.6 mm (0.024 inch) CATALOGUE NUMBERS(1) BULK PACKED L 13 mm L = 4 0.5 mm ON TAPE (REEL) 2222 655 09... 2222 655 19... 2222 655 53... ON TAPE(2) (AMMOPACK) 2222 655 63... Notes 1. Catalogue numbers to be completed by adding the last 3-digit suffix for required capacitance value, see Table 3. 2. H0 = 18.25 mm. 1997 Nov 04 219 Philips Components Product specification Class 2, 500 V (DC) (flanged types) Miniature ceramic plate capacitors Table 3 Preferred range of values CAPACITANCE VALUE (pF) MARKING CODE SIZE (see Table 1) VALUE VOLTAGE(3) (V) SUFFIX OF CATALOGUE NUMBERS (see Table 2) 100 I(1) n10 500 101 120 I(2) n12 500 121 150 I n15 500 151 180 I n18 500 181 220 I n22 500 221 270 I n27 500 271 330 I n33 500 331 390 IIA n39 500 391 470 IIA n47 500 471 560 IIA n56 500 561 680 IIB n68 500 681 820 IIB n82 500 821 1000 IIB 1n0 500 102 1200 III 1n2 500 122 1500 III 1n5 500 152 1800 III 1n8 500 182 2200 IV 2n2 500 222 2700 IV 2n7 500 272 3300 V 3n3 500 332 3900 V 3n9 500 392 4700 V 4n7 500 472 Notes 1. Maximum thickness 2.7 mm. 2. Maximum thickness 2.5 mm. 3. The voltage code may be marked on the front or rear side of the capacitor. 1997 Nov 04 220 Philips Components Product specification Class 2, 500 V (DC) (flanged types) Miniature ceramic plate capacitors ELECTRICAL CHARACTERISTICS The capacitors meet the essential requirements of "IEC 384-9". Unless stated otherwise all electrical values apply at an ambient temperature of 20 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 63 to 67%. DESCRIPTION VALUE Capacitance values measured at 1 kHz, 1 V 100 to 4700 pF (E12 series) Tolerance on the capacitance, after 1000 hours 10% Dielectric material K2000 Rated DC voltage 500 V DC test voltage; duration 1 minute 1 250 V DC test voltage of coating; duration 1 minute 1 250 V Insulation resistance at 500 V (DC) after 1 minute >4000 M Tan measured at 1 kHz, 1 V <3.5% Category temperature range -55 to +85 C (2C2) and -55 to +150 C (2D1) Storage temperature range -55 to +85 C Capacitance change as a function of temperature see Fig.4 Capacitance change as a function of frequency see Fig.5 Climatic category (IEC 68) 55/150/56 Ageing typical 1.5% per time decade CCA943 60 handbook, full pagewidth C C (%) 0 -60 -100 -50 0 50 100 T (C) 150 Guaranteed limits 2C2 Typical spread Guaranteed limits 2D1 Fig.4 Typical capacitance change with respect to the capacitance at 20 C as a function of temperature. 1997 Nov 04 221 Philips Components Product specification Class 2, 500 V (DC) (flanged types) Miniature ceramic plate capacitors CCA048 60 handbook, full pagewidth C C (%) 40 20 0 -20 -40 -60 10 102 103 104 105 106 107 f (Hz) U = 1 V (DC). Fig.5 Typical capacitance change with respect to the capacitance at 1 kHz as a function of frequency. MLB033 10 3 100 pF IZI () 10 2 1000 pF 10 1 10 1 1 10 2 10 Fig.6 Typical impedance Z as a function of frequency. 1997 Nov 04 222 f (MHz) 10 3