EVERLIGHT ELECTRONICS CO.,LTD. Technical Data Sheet 0603 Package Chip LED with Bi-Color(Multi-Color) 19-22/R6GHC-C02/2T Features Package in 8mm tape on 7diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow solder process. Multi-color type. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 19-22 SMD Taping is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. Besides, lightweight makes them ideal for miniature applications. etc. Applications Backlighting in dashboard and switch. Telecommunication: indicator and backlighting in telephone and fax. Flat backlight for LCD, switch and symbol. General use. Device Selection Guide Chip Type Material Emitted Color R6 AlGaInP Brilliant Red GH InGaN Brilliant Green Lens Color Water Clear Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 1 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Package Outline Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 2 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Absolute Maximum Ratings (Ta=25) Parameter Symbol Rating Unit Reverse Voltage VR 5 V Forward Current IF Operating Temperature Topr -40 ~ +85 Storage Temperature Tstg -40 ~ +90 Electrostatic Discharge(HBM) ESD Power Dissipation Pd Peak Forward Current (Duty 1/10 @1KHz) IFP R6:25 mA GH:25 R6:2000 V GH:150 R6:60 mW GH:110 R6:60 mA GH:100 Reflow Soldering : 260 for 10 sec. Soldering Temperature Tsol Hand Soldering : 350 for 3 sec. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 3 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Electro-Optical Characteristics (Ta=25) Parameter Luminous Intensity Viewing Angle Peak Wavelength Symbol Iv Min. Typ. R6 14.5 20.0 GH 45.0 65.0 ----- 130 21/2 p R6 ----GH Dominant Wavelength d Spectrum Radiation Bandwidth Forward Voltage Reverse Current VF IR R6 617.5 GH 517.5 Max. Unit ----- mcd ----- deg ----- nm 632 518 ------ R6 629.5 533.5 IF=5mA 20 ----- ----GH nm 35 R6 ----- 1.9 2.3 GH ----- 2.9 3.4 ----- ----- R6 nm Condition GH 10 50 V A VR=5V Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 4 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T R6 Bin Range Of Dom. Wavelength Bin Min Max 1 617.5 621.5 2 621.5 625.5 3 625.5 629.5 Unit Condition nm IF=5mA Unit Condition nm IF=5mA GH Bin Range Of Dom. Wavelength Bin Min Max 1 517.5 525.5 2 525.5 533.5 Notes: 1.Tolerance of Luminous Intensity 10% 2.Tolerance of Dominant Wavelength 1nm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 5 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Typical Electro-Optical Characteristics Curves R6 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 6 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Typical Electro-Optical Characteristics Curves GH Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 7 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Label explanation CAT: Luminous Intensity Rank HUE: Dom. Wavelength Rank REF: Forward Voltage Rank Reel Dimensions Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 8 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Carrier Tape Dimensions: Loaded quantity 2000 PCS per reel Note: The tolerances unless mentioned is 0.1mm ,Unit = mm Moisture Resistant Packaging Label Aluminum moisture-proof bag Desiccant Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Label Rev. 1 Page: 9 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Reliability Test Items And Conditions The reliability of products shall be satisfied with items listed below. Confidence level90% LTPD10% Test Sample Hours/Cycles Size No. Items Test Condition 1 Reflow Soldering Temp. : 2605 Min. 5sec. 6 Min. 22 PCS. 0/1 Temperature Cycle H : +100 15min 5 min L : -40 15min 300 Cycles 22 PCS. 0/1 Thermal Shock H : +100 5min 10 sec L : -10 5min 300 Cycles 22 PCS. 0/1 Temp. : 100 1000 Hrs. 22 PCS. 0/1 Temp. : -40 1000 Hrs. 22 PCS. 0/1 2 3 4 5 High Temperature Storage Low Temperature Storage Ac/Re 6 DC Operating Life IF = 20 mA 1000 Hrs. 22 PCS. 0/1 7 High Temperature / High Humidity 85/ 85%RH 1000 Hrs. 22 PCS. 0/1 Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 10 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T Precautions For Use 1. Over-current-proof Customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( Burn out will happen ). 2. Storage 2.1 Do not open moisture proof bag before the products are ready to use. 2.2 Before opening the package: The LEDs should be kept at 30 or less and 90%RH or less. 2.3 After opening the package: The LED's floor life is 1 year under 30 deg C or less and 60% RH or less. If unused LEDs remain, it should be stored in moisture proof packages. 2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 605 for 24 hours. 3. Soldering Condition 3.1 Pb-free solder temperature profile 3.2 Reflow soldering should not be done more than two times. 3.3 When soldering, do not put stress on the LEDs during heating. 3.4 After soldering, do not warp the circuit board. Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 11 of 12 Prepared by:Zhang huali EVERLIGHT ELECTRONICS CO.,LTD. 19-22/R6GHC-C02/2T 4.Soldering Iron Each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful because the damage of the product is often started at the time of the hand solder. 5.Repairing Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or will not be damaged by repairing. EVERLIGHT ELECTRONICS CO., LTD. Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Tucheng, Taipei 236, Taiwan, R.O.C Tel: 886-2-2267-2000, 2267-9936 Fax: 886-2267-6244, 2267-6189, 2267-6306 http://www.everlight.com Everlight Electronics Co., Ltd. http://www.everlight.com Device No. : SZDSE-192-C02 Prepared date: 03-Jan-2005 Rev. 1 Page: 12 of 12 Prepared by:Zhang huali