• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400
• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588
Visit www.macomtech.com for additional data sheets and prod uct information.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
changes to the product(s) or information contained herein without notice.
1
Point Contact Detector
10 MHz to 18 GHz
Rev. V5
2087-6001-00
ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions
is considering for development. Performance is based on target specifications, simulated results,
and/or prototype measurements. Commitment to develop is not guaranteed.
PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
Commitment to produce in volume is not guaranteed.
Features
• Broadband Frequency Ranges
• No Bias Required
• Flat Frequency Response
• Passivated Stainless Steel Finish
Specifications
Parameter Specification
Flatness (Maximum) ± 0.75 dB, 10 MHz to 4 GHz
± 1.25 dB, 4 MHz to 8 GHz
± 1.5 dB, 10 MHz to 12 GHz
± 2.5 dB, 10 MHz to 18 GHz
VSWR (Typical) 1.7:1, 10 MHz to 4 GHz
2.7:1, 10 MHz to 8 GHz
3.5:1, 10 MHz to 12 GHz
4.0:1, 10 MHz to 18 GHz
Maximum Power 100 mW
Output Polarity Negative 4
Video Resistance 6 k Ohms Typical 2
Temperature Range -65°C to +100°C
Detector
Part Number Frequency
Range
1
(GHz) Open Circuit
Voltage
Sensitivity
2
(mV/mW) Min.
Tangential
Sensitivity
3
(-dBm) Min.
Output
Capacitance
(pF) Typical
Dimension A
Inches mm
10 MHz to 4 GHz 400 45 12 1.55 39.4
10 MHz to 8 GHz 500 45 12 1.55 39.4
10 MHz to 12 GHz 700 45 12 1.55 39.4
10 MHz to 18 GHz 800 45 12 1.55 39.4
2087-6001-00
1. Usable to 20 GHz
2. For RF power levels below –20 dBm, and with an open circuit load.
3. With video amplifier of 1 MHz bandwidth and 2 dB noise figure.
4. For Positive Output change suffix to -13.
Mechanical Outline Drawing