Customer Reviews
COMMENTS 12 REVIEWS 3
4.7 out of 5
Based on 3 ratings:
nice and small but the reference is missing
about 3 months ago by Member #1374356 verified purchaser
I still try to get this board to read my CAN signals but it seams hard to find a proper reference for the CAN
library.
Great, small CAN board
about 3 months ago by Member #566755 verified purchaser
This small board has all I need to complete my “Hack my car” Project. In addition to the CAN Interface it also
has a large number of GPIOs and the I2C support I need for interfacing a bluetooh module and a DAB radio.
The CAN library is also good, as it supports a number of CAN bus speeds.
Bought for use in RS485 filtering of a signal
about 3 weeks ago by DemolishManta verified purchaser
I have a digital signal that is transmitted via RS485. I needed to transfer this signal over another RS485
channel, but that channel would transmit the RS485 signal then return to floating a short time after the signal
was transmitted. So I purchased 2 AST-CAN485 boards and a couple of RS485 transceiver breakout boards. I
programmed the AST-CAN485s to receive/send the digital signal via the additional transceivers. I set each
board identity via EEPROM. I then wrote a program that would send a byte from one board to another via
RS485 and USART at 1megabaud. When all was said and done I created a digital signal transport over RS485
that added 30 microseconds latency. I was shooting for 50 microseconds.
This board has done everything I asked of it without complaint. It just works and works well. If I ever need
another RS485 device or CAN device this will be a board I reach for to fill that need.
Thanks for making it available!
5 star 2
4 star 1
3 star 0
2 star 0
1 star 0
Currently viewing all customer reviews.
START
SOMETHING.
About Us
About SparkFun
Press & Media
SparkFun Education
Feeds
Jobs
Contact
Help
Customer Service
Shipping
Return Policy
FAQ
Chat With Us
Programs
Become a Community Partner
Community Stories
Custom Kit Requests
Community
Forum
SparkFun IRC Channel
Take the SparkFun Quiz
In 2003, CU student Nate Seidle fried a power supply in his dorm room
and, in lieu of a way to order easy replacements, decided to start his
own company. Since then, SparkFun has been committed to sustainably
helping our world achieve electronics literacy from our headquarters in
Boulder, Colorado.
No matter your vision, SparkFun's products and resources are designed
to make the world of electronics more accessible. In addition to over
2,000 open source components and widgets, SparkFun offers
curriculum, training and online tutorials designed to help demystify the
wonderful world of embedded electronics. We're here to help you start
something.