RC D’s PMF Series meets the need for ultra-precision performance
when product reliability is a must. Stability levels (comparable to
those of precision wirewound resistors), coupled with the
excellent high-frequency performance of film resistors, makes
the PMF Series the universal choice. State-of-the-art deposition
and trim equipment enables the industry’s widest resistance
range. The exceptional performance of this series provides new
opportunities for circuit designers to obtain the utmost in long
term reliability without the need for post circuit trimming.
Tolerances to ±0.01%, TC’s to ±3ppm/°C
Exceptional performance levels
Extremely low noise, reactance, voltage coefficient
All sizes available on Tape & Reel
ULTRA PRECISION METAL FILM RESISTORS
DERATING:
Derate W and V per graph when ambient temp exceeds 85°C
SPECIFICATIONS
TYPICAL PERFORMANCE
MATCHED SETS AND NETWORKS
RCD’s experience in matching resistors for sets and networks
can result in an economical solution for many circuits. Cost
savings up to 50% can be achieved by allowing relatively loose
absolute tolerances but tight matching requirements by pair or
set. Resistance matching is available to 0.01% and T.C.
tracking to ±1ppm/°C.
* Maximum working voltage determinedby E = PR, E should not exceed value listed in
column above.
DIMENSIONS
PMF SERIES
OPTIONS
Option S: miniature size
Option ER: 100 hour burn-in (full rated W25°C)
Also available: matched sets, axial and vertical cut &
formed leads, hi-rel screening, special marking, hermetic
seal, non-standard values, increased power & voltage, etc.
Customized components are an RCD speciality! → D ←
← L →
← H → d
↓
↑Inch [mm]
120
100
80
60
40
20
0 30 50 70 90 1 10 130 150
AMBIENT TEMPERA TURE (°C)
% OF RA TED POWER
85°
DCR epyT 230.±L ]8.[ 520.±D ]6.[ 300.±d ]80.[ ).niM(H
02/1FMP]8.3[051.]7.1[560.]54.[810.]42[49.
01/1FMP]1.7[082.]7.2[501.]6.[520.]82[1.1
S8/1FMP]1.7[082.]7.2[501.]6.[520.]82[1.1
8/1FMP]6.9[083.]5.3[041.]6.[520.]23[52.1
S4/1FMP]6.9[083.]5.3[041.]6.[520.]23[52.1
4/1FMP]7.41[875.]8.4[981.]6.[520.]13[22.1
2/1FMP]7.81[637.]53.6[052.]8.[130.]23[52.1
,C°58+ot02-(tneiciffeoC.pmeT )C°52feR °/mpp52(C)dts,mpp51,
mpp5,mpp01mpp3,
)rh2/1cyc5,C°58+~55-(kcohSlamrehT%20.0
)601.M,202-DTS-LIM(.tsiseRerutsioM%80.0
)S01,C°062(taeHredloSotecnatsiseR%20.0
,S5,VWCRx5.2(daolrevOemiTtrohS )RVx5.1ETN )S.tpO%20.(%10.0
)rewoplluf,.srh0001(efiL)S.tpO%50.(%20.0
)raeyrep.xaM(efiLflehSMPP05
htgnertScirtceleiD)02/1FMPV003(V005
erutarepmeTgnitarepOC°051+ot55-
DCR epyT egattaW C°58@ egatloV *gnitaR ecnatsiseR egnaR
02/1FMP02/1002 01
Ω
K406ot
01/1FMP01/1052 01
Ω
geM5.1ot
S8/1FMP8/1052 01
Ω
geM5.1ot
8/1FMP8/1003 01
Ω
geM2ot
S4/1FMP4/1003 01
Ω
geM2ot
4/1FMP4/1053 01
Ω
geM5ot
2/1FMP2/1004 01
Ω
geM01ot
RESISTORSCAPACITOR
S
C
OILSDELAY
LINES
RCD Component s Inc., 520 E. Industrial Park Dr., Manchester, NH, USA 03109
T el: (603) 669-0054 Fax:(603) 669-5455 E-mail:sales@rcdcomponents.com www.rcdcomponents.com
FA043B Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
P/N DESIGNA TION: PMF1/10 - 1001 - Q B 5 W
Tolerance Code: F=1%, D=0.5%, C=0.25%,
B=0.1%, A=0.05%, Q=0.02%, T=0.01%
RCD Type
Options: S, ER, etc. (leave blank if standard)
Packaging: B = Bulk, T = Tape & Reel
Resis. Code: 3 signif. figures & multiplier,
e.g. 1R00= 1Ω, 10R0=10Ω, 1000= 100Ω, 1001=1KΩ,
1002=10KΩ, 1003=100KΩ, 1004=1MΩ,1005=10MΩ
Temp. Coefficient: (5=5ppm, 10=10ppm, 25=25ppm, etc.)
Termination: W= Lead-free, Q= Tin/Lead (leave blank if either is acceptable,
in which case RCD will select based on lowest price and quickest delivery
