SIL30C Series 12Vin single output DC/DC CONVERTERS * * * * * * * * C Class Non-isolated 1 NEW Product 30A current rating Input voltage range: 10.2V - 13.8V Output voltage range: 0.9V - 5.0V Industry leading value * Cost optimised design Excellent transient response Output Voltage adjustability * Pathway for future upgrades * Supports silicon voltage migration * Resulting in reduced design-in and qualification time Designed in reliability: MTBF of > 3.9 million hrs per Telcordia SR-332 Current Share The SIL30C Series is a new high density open-frame non-isolated converter for space sensitive applications. The converter has a wide input range (10.2 to 13.8Vdc) and offers a wide 0.9V to 5V output voltage range with a 30A load. The series offers remote ON/OFF, over-temperature protection and over-current protection as standard. Its current share facility supports parallel operation of multiple SIL30 units and the remote sense feature enables the SIL30C compensate for voltage drops between the converters output and the load. With full international safety approvals including EN60950 and UL/cUL60950 the SIL30C reduces compliance costs and time to market. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25C unless otherwise stated OUTPUT SPECIFICATIONS Voltage adjustability INPUT SPECIFICATIONS (CONTD.) (See Note 1) 0.9V to 5.0V Output setpoint accuracy Using 1.0% trim resistors 3% Turn ON threshold Turn OFF threshold 9.0VDC 7.6VDC Line regulation Low line to high line 0.2% max. GENERAL SPECIFICATIONS Load regulation Full load to min. load 1.5% max. Efficiency Min/max load 91% 0A/30A Switching frequency Fixed Approvals and standards (pending) (See Note 7) Overshoot At turn-on 1.0% max. Undershoot At turn-off 100mV max. Ripple and noise 5Hz to 20MHz (See Note 2) 50mV pk-pk 15mV rms Transient response (See Note 3) Deviation Current share Full load 75mV 150s recovery to within regulation band 10% Material flammability Nominal 12V 10.2 to 13.8VDC Input current No load Remote OFF 230mA 30mA Input current (max.) (See Note 4) 13.8A max. @ Io max. and Vin = 10.8V Input reflected ripple (See Note 2) 150mA (pk-pk) Remote ON/OFF Logic compatibility ON OFF Start-up time (See Note 5) Logic high >2.4VDC <0.8VDC Power up Remote ON/OFF UL94V-0 Weight 28.3g (1oz) MTBF Telcordia SR-332 4,456,655 Hours ENVIRONMENTAL SPECIFICATIONS Thermal performance (See Note 8) INPUT SPECIFICATIONS Input voltage range 300kHz typ. TUV Product Services IEC60950, UL/cUL60950 Operating ambient, temperature Non-operating 0C to +80C -40C to +125C PROTECTION Short-circuit protection Over-temperature protection Foldback, non-latching Hiccup, non-latching RECOMMENDED SYSTEM CAPACITANCE Input capacitance Output capacitance (See Note 9) 270F/20m esr max. (See Note 9) 2 x 680F/10m esr max. International Safety Standard Approvals <30ms <30ms UL/cUL CAN/CSA 22.2 No. E139421 UL60950 file No. E139421 TUV TUV Product Service (EN60950) Certificate No. B0211 19870 205 CB report and certificate to IEC60950 File Name: SIL30C.PDF Rev (02): 15 Apr 2004 SIL30C Series 12Vin single output DC/DC CONVERTERS C Class Non-isolated 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm OUTPUT POWER (MAX.) INPUT VOLTAGE OVP 150W 10.2-13.8VDC N/A NEW Product OUTPUT VOLTAGE (11) OUTPUT CURRENT (MIN.) OUTPUT CURRENT (MAX.) EFFICIENCY (TYP.) LINE LOAD MODEL NUMBER (10,12) 0.9V - 5V 0A 30A 91% 0.2% 1.5% SIL30C-12SADJ-V Part Number System with Options REGULATION SIL30C-12SADJ-V Mounting Option V = Vertical Mount H = Horizontal Mount Product Family SIL = Single In Line Rated Output Current 30 = 30Amps Number of Outputs SADJ = Single Adjustable Output Performance C = Cost Optimised Input Voltage 12 = 10.2V - 13.8V Output Voltage Adjustment of the SIL30C-12SADJ Series The ultra-wide output voltage trim range offers major advantages to users who select the SIL30C-12SADJ. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.9V to 5.0V. When the SIL30C-12SADJ converter leaves the factory the output has been adjusted to the default voltage of 0.9V Notes 1 Uses external resistor from TRIM to output ground. See Application Note 132 for details. 2 Measured with external filter. See Application Note 132 for details. 3 di/dt = 10A/s, Vin = Nom, Tc = 25C, load change = 0.5 lo max to 0.75 lo max and 0.75 lo max to 0.5 lo max. 4 External input fusing is recommended. 5 Power up is the time from application of DC input to POWER GOOD high. Remote ON/OFF asserted high to POWER GOOD high. 6 Signal line assumed <3m. 7 This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product. 8 See Application Note 132 for operation above 50C. 9 See Application Note 132 for ripple current requirements. 10 The standard unit with the suffix '-V' is for vertical mounting. To order a unit with horizontal mounting, please add the suffix '-H' to the model number, e.g. SIL30C-12SADJ-H. 11 This model has a wide trim output of between 0.9V to 5V. An external resistor adjusts the output voltage. 12 To order a unit with a pin length of 0.150", please add suffix `P4' to the model number, e.g. SIL30C-12SADJ-HP4. PIN CONNECTIONS PIN NO. FUNCTION PIN NO. FUNCTION 1 TRIM 13 Vin 2 No Pin 14 Vin 3 Ground 15 Vout 4 Power Good 16 Vout 5 Not Connected 17 Ground 6 Current Share 18 Vout 7 Ground 19 Ground 8 Ground 20 Vout 9 Remote ON/OFF 21 Ground 10 Remote sense (GND) 22 Vout 11 Remote sense (O/P) 23 Ground 12 Vin 24 Vout File Name: SIL30C.PDF Rev (02): 15 Apr 2004 SIL30C Series 12Vin single output DC/DC CONVERTERS C Class Non-isolated 3 For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.150 (3.82) NEW Product 0.470 (11.94) 0.050 (1.27) 1.240 (31.40) 1.350 (34.36) 0.050 (1.27) Ref. 1.250 (31.75 0.120 (3.05) 0.150 (3.81) Ref. 0.100 (2.54) Typ. 0.290 (7.46) 0.212 (5.38) 2.300 (58.42) 0.090 (2.29) 1.200 (30.48) 0.120 (3.05) 2.400 (60.96) All dimensions in inches (mm) General tolerance 0.015in (0.30mm) except where specified otherwise Figure 1: Mechanical Drawing - Horizontal Mount Version 0.52 0.02 (13.20 0.5) 0.050 (1.27) 0.025 (0.64) Typ 0.062 (1.57) Ref 0.140 (3.56 Typ) 1.250 (31.75) 0.09 0.02 (2.4 0.5) 0.140 (3.56) 2.400 (60.96) 0.090 (2.29) Pin 1 0.100 (2.54) Typ 2.300 (58.42) 0.250 (6.35) 0.050 (1.27) Typ 0.025 (0.64) Typ 0.019 (0.48) Ref 1.200 (30.48) 0.26 0.03 (6.591 0.76) All dimensions in inches (mm) General tolerance 0.015in (0.30mm) except where specified otherwise Figure 2: Mechanical Drawing - Vertical Mount Version Data Sheet (c) Artesyn Technologies(R) 2004 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: SIL30C.PDF Rev (02): 15 Apr 2004