REVISION U DO NOT SCALE FROM THIS PRINT HW-XX-XX-XX-X-XXX-XXX-XX-XXX NOTES: 1. C REPRESENTS A CRITICAL DIMENSION. 2. GOLD PLATING, OR HEAVY GOLD PLATING TO BE ON LONGER TAIL. 3. MAXIMUM HEIGHT VARIATION: .010[0.25] 4. MAXIMUM ALLOWEABLE BOW: .005[0.13] IN/IN AFTER ASSEBMBLY. 5. MAXIMUM PIN ROTATION IN BODY: 2 6. MINIMUM PUSHOUT FORCE: 2 LB. 7. PARTS ARE CUT TO SIZE. 8. MAXIMUM CUT FLASH: .005[0.13] No OF POSITIONS EXPRESSED IN # OF POS (-01 THRU -50) OPTION POLARIZATION OPTION -LL: LOCKING LEAD (SEE FIG 2) AVAIL ON .090[2.29] .310[7.87] TAILS ONLY (N/A IN SINGLE ROW, 1 & 2 POS) LEAD STYLE (SEE TABLE 1) PLATING SPECIFICATION (SEE NOTE 2) -G: 10" SELECTIVE GOLD IN CONTACT AREA, 3" SELECTIVE GOLD ON TAIL. -T: MATTE TIN ON CONTACT AND TAIL. -S: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -H: 30" SELECTIVE GOLD IN CONTACT AREA, 3" SELECTIVE GOLD ON TAIL. -L: 10" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -F: 3" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -TL: 150" - 300" TIN/LEAD ON CONTACT AND TAIL. -TM: MATTE TIN ON CONTACT AND TAIL. -SM: 30" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -LM: 10" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. -FM: 3" SELECTIVE GOLD IN CONTACT AREA, MATTE TIN ON TAIL. 50 01 02 01 99 100 TAIL LENGTH (.055[1.40] MIN) SPACE OPTION (.200[5.08] MIN) MAX = "L" - .055[1.40] ROW OPTION -S: SINGLE (USE BODY HTSW-50-S-LCP) -D: DOUBLE (USE BODY HTSW-50-D-LCP) -T: TRIPLE (USE BODY HTSW-50-T-LCP) -Q: DOUBLE ROW, .200 ROW SPACE (USE BODY HTSW-50-T-LCP) 01 03 01 03 150 148 150 W (NO OF POSITIONS x .100[2.54])+.000[0.00] -.015[0.38] .000[0.00] 2.54 MIN 2 MAX SWAY (EITHER DIRECTION) C -XXX.008[0.20] "L" REF SPACE OPTION OVERALL LENGTH (.200[5.08] MIN (SEE TABLE 1) (MAX = "L" - .055[1.40]) HTSW-50-X-LCP .100 2.54 REF (TYP) T-1S6-XX-X-2 FIG 1 HW-10-09-XX-S-530-100 SHOWN CRIMP SHORTER TAIL ON OR ABOUT (OPPOSITE CONTACT AREA) -XXX 2.54 .008[0.20] TAIL LENGTH (.055[1.40] MIN) C W -S: SINGLE FIG 2 .017 0.43 .04 1.0 -D: DOUBLE -T: TRIPLE ROW OPTION -Q: DOUBLE ROW UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN INCHES. TOLERANCES ARE: DECIMALS ANGLES .XX: .01 [0.3] 2 .XXX: .005 [0.13] .XXXX: .0020 [0.051] .0080 0.204 C ROW OPTION ROW OPTION ROW OPTION .100 2.54 REF (TYP) ROW OPTION -LL: LOCKING LEAD (SAME AS FIG 1, DIFFERENT AS SHOWN) 'A' -S: SINGLE 148 DETAIL 'A' SCALE 3 : 1 MATERIAL: ROW OPTION -D: DOUBLE ROW OPTION -T: TRIPLE ROW OPTION -Q: DOUBLE ROW PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC, INC. AND SHALL NOT BE REPRODUCED OR TRANSFERRED TO OTHER DOCUMENTS OR DISCLOSED TO OTHERS OR USED FOR ANY PURPOSE OTHER THAN THAT WHICH IT WAS OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC, INC. DO NOT SCALE DRAWING SHEET SCALE: 3:2 INSULATOR: LCP, UL 94 VO, COLOR: NATURAL TERMINAL: PHOS BRONZE 520 PARK EAST BLVD, NEW ALBANY, IN 47150 PHONE: 812-944-6733 FAX: 812-948-5047 e-Mail info@SAMTEC.com code 55322 .100[2.54] HIGH TEMP TERMINAL BODY (BOARD STACKING) DESCRIPTION: DWG. NO. HW-XX-XX-XX-X-XXX-XXX-XX-XXX F:\DWG\MISC\MKTG\HW-XX-XX-XX-X-XXX-XXX-XX-XXX-MKT.SLDDRW BY: REIDINGER 08/27/1991 SHEET 1 OF 1