Datasheet -- SDP8314-301 SDP8314-301 SDP Series Optoschmitt Detector, Side-looking Plastic Package Representative photograph, actual product appearance may vary. Features Due to regional agency approval requirements, some products may not be available in your area. Please contact your regional Honeywell office regarding your product of choice. Side-looking plastic package 55 (nominal) acceptance angle TTL/LSTTL/CMOS compatible Open collector output Buffer (SDP8304) or inverting (SDP8314) logic available High noise immunity output Mechanically and spectrally matched to SEP8506 and SEP8706 infrared emitting diodes Description The SDP8304/8314 series consists of a high speed IC molded in a side-looking black plastic package to minimize the effect of visible ambient light. The detector incorporates a Schmitt trigger which provides pulse shaping and hysteresis for noise immunity. Output rise and fall times are independent of rate of change of incident light. Detector sensitivity has been internally temperature compensated. The output stage is an open collector NPN transistor. This configuration allows the sensor to interface with circuit elements driven by supply voltages other than the Vcc supply. For additional output configuration options refer to SDP8004/8014 and SDP8604/8614. Device Polarity: Buffer - Output is HI when incident light intensity is above the turnon threshold level. Inverter - Output is LO when incident light intensity is above the turn-on threshold level. SDP8314-301 SDP Series Optoschmitt Detector, Side-looking Plastic Package file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDP8314-301.htm (1 of 4)14/03/2005 11:32:35 O Datasheet -- SDP8314-301 Product Specifications Product Type IR Component Angular Response (Degree) 50 Turn-on Threshold Irradiance 0.37 mW/cm maximum Output Open-Collector Output Logic Inverter Package Style Side-Looking Package Components Plastic Package Color Black Operating Temperature Range -40 C to 85 C [-40 F to 185 F] Hysteresis (H) 33% to 67% Operating Supply Voltage 4.5 V to 12.0 V Supply Voltage 12.0 Vdc High Level Output Current 100 A maximum Low Level Output Voltage 0.4 V maximum Low Level Output Current 16 mA Applied Output Voltage 35 V Operating Point Temperature Coeffient -0.76 %/C Output Rise Time 7.0 ns Output Fall Time 7.0 ns Propagation Delay, Low-High,HighLow Clock Frequency Duration of Output Short Vcc or Ground Irradiance Comment 5.0 s 100 kHz 1.0 second 25 mW/cm Output is LO when incident light intensity is above the turn-on threshold level. Availability Global Product Name Optoschmitt Detector Supply Current max. 15 mA @ 25 C SDP8314-301 file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDP8314-301.htm (2 of 4)14/03/2005 11:32:35 O Datasheet -- SDP8314-301 SDP Series Optoschmitt Detector, Side-looking Plastic Package SDP8314-301 SDP Series Optoschmitt Detector, Side-looking Plastic Package PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices, or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDP8314-301.htm (3 of 4)14/03/2005 11:32:35 O Datasheet -- SDP8314-301 MISUSE OF DOCUMENTATION The information presented in this product sheet (or catalog) is for reference only. DO NOT USE this document as product installation information. Complete installation, operation and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. (c) Copyright Honeywell Inc.1998-2004 All rights reserved. file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SDP8314-301.htm (4 of 4)14/03/2005 11:32:35 O