Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.

Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,

AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: "901/902..." MAY BE REPLACED BY "Axxx".) OTHER CODES AND

SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.

THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.

REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.

10-31-05

Revision

D

This specification sheet forms a part of the latest issue of Raychem Specification 44 and MIL-W-81044 as applicable.

CABLE CONSTRUCTION DETAILS

OUTSIDE DIAMETER

44A012X-24-* 24 .080 .084 4.3

44A012X-22-* 22 .094 .098 6.3

44A012X-20-* 20 .110 .114 9.4

44A012X-18-* 18 .130 .134 14.3

44A012X-16-* 16 .144 .150 18.1

44A012X-14-* 14 .178 .185 28.4

44A012X-12-* 12 .216 .224 44.3

Spark Test: 5.7 kV (rms) at 3 kHz

Impulse Dielectric Test, 8.0 kV (peak)

The "*" in the part numbers above shall be replaced

by color code designators with a slash separating

component wire colors:

1/ Example: AWG 20, tin-coated copper wires;

black and brown component wires:

44A0121-20-0/1

NOTE: Nominal values are for information only

Nominal values are not requirements.