NC7MXX-BAG 7 pole male cable connector with black metal housing and silver contacts. The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Features & Benefits * Male connector with improved locking recess without * Improved chuck type strain relief provides higher pull- * Boot with polyurethane gland gives high protection to * Colored rings and boots available for coding or * Sleek and ergonomic design - valuable and handy * Rugged zinc diecast shell, longlasting and dependable * Internal thread on shell is well protected against any * Branded with unique hologram - guarantees genuine "window", more stringent housing increases durability cable bending stresses damage NC7MXX-BAG out force and makes assembly easier and faster identification and authentic Neutrik product 1/3 Technical Information Product Title NC7MXX-BAG Connection Type XLR Gender male Electrical Capacitance between contacts 9 pF Contact resistance 3 m Dielectric strength 1,5 kVdc Insulation resistance > 10 G (initial) Rated current per contact 5A Rated voltage < 50 V Mechanical Cable O.D. 3.5 - 8.0 mm Insertion force 20 N Withdrawal force 20 N Lifetime > 1000 mating cycles Wiresize max. 1.0 mm Wiresize max. 18 AWG Wiring Solder contacts Locking device Latch lock NC7MXX-BAG 2/3 Material Boot Polyurethan Contact plating 2 m Ag over 2 m Ni Contacts Brass (CuZn39Pb3) Insert Polyamide (PA 6.6 30 % GR) Locking element Zinc diecast (ZnAl4Cu1) Shell Zinc diecast (ZnAl4Cu1) Shell plating Black chromium Strain relief Polyacetal (POM) Environmental Flammability UL 94 HB Standard compliance IEC 61076-2-103 Protection class IP 40 Solderability Complies with IEC 68-2-20 Temperature range -30 C to +80 C NC7MXX-BAG 3/3