tray packaging packaging unit 36 pcs 5 x 18 = 90 max. 138 18 6,3 14,8 6,3 -0,25 Verpackt in Tray Verpackungseinheit 36 St. 3,2 Variante 1 version 1 1,7 0,6 Bestuckung kraftlos pcb Ansaughaube nur bei Version 1 hood only on version 1 46,2 powerless assembly Leiterplatte Pin 1 5 x 46,2 = 231 max. 325 Sonstige Angaben siehe Zeichnung 204628 / Additional indications according to drawing 204628 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 75 Stuck - Packaging unit: 75 pcs Abspulrichtung - Reel +0,2 39,3 -0,4 24,75 -0,2 16 off Direction 24 Variante 2 21,2 version 2 Bestuckung mit Kraft 56 8 -0,2 150 330 33,3 0,1 ohne / without 56,5 Pin 1 Sonstige Angaben siehe Zeichnung 204654 / Additional indications according to drawing 204654 Bolzen / bolt Mutter / nut max. Einschraubtiefe 5,5 mm max. Einschraubtiefe 3,7 mm thread depth max. 5,5 mm thread depth max. 3,7 mm 3,7 Gewinde / thread M3 / #4-40 re c o m m e n d e d la y o u t: 0,05 7 x 2,74 = 19,18 A (15x) +0,09 1 -0,06 0,05 2,74 B Pin 1 3,2 0,1 6,4 Gewinde / thread M3 / #4-40 L a y o u tv o rs c h la g : 2,84 12,6 0,3 13,8 assembly with force 1,37 B 2,74 6 x 2,74 = 16,44 33,3 0,05 X 0,05 A Sonstige Angaben siehe Zeichnung 204625 / Additional indications according to drawing 204625 #4-40 * Tray versiegelt Tray sealed M3 254050 Anschlussbereich verzinnt terminal area tin plating Anforderungsstufe: 2 class: 2 #4-40 454782 Ident-Nr. part-no. tape &reel Variante 1 version 1 M3 Ident.-Nr. Ident.-Nr. Variante 1 Variante 2 part-no. tray version 1 part-no. tray version 2 ohne without Mutter thread Bolzen Bemerkung bolt remark Fehlende Masse und Angaben siehe DIN 41652 / Missing information and dimensions according to DIN 41652 Sonstige Angaben siehe Fertigungsunterlagen / Additional indications according to the production documentation Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. * 254722 M 1:1 Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. TMC-S 15-THR-1,7-6,3-BA8 TMC-S 15-THR-1,7-6,3-type 8 144971 www.ERNI.com e 19.04.2011 Index Date Class TMCS I A3