BD Biosciences SJ, Confidential CO HISTORY 01 - CO # DATE 500000000950 - 03/12/12 - CHANGE CODES a CO CHANGE CODES OPERATIONAL SPECIFICATIONS: The operational characteristics of this device shall be in accordance with the applicable manufacturers published specifications for the part number specified, at the effective date of this document. Release a New a Component. Add an Approved b Source. Change Mfr's Part c Number. d e f Change Part's Description. Disqualify a Source. Updated specification format g h Other/Misc (see CO). RoHS compliance info COMPONENT SOURCE AND APPROVAL STATUS MANUFACTURER OSRAM MANUFACTURERS PART NUMBER LRTB G6TG-TU7+VV7+ST7-IB APPROVAL STATUS (SEE NOTE-1) A NOTES/REMARKS/COMMENTS RoHS compliant Note-1. Approval Status Codes: A = APPROVED D = DISQUALIFIED, (Not approved, do not use) DU=DISQUALIFED FOR NEW BUYS; USE UP ALL EXISTING MATERIALS O = OBSOLETE, (Not available, discontinued by manufacturer, still approved for use) Note-2. The Component Engineer may approve components not in the "Better Than Spec", with the Design Engineers approval. Note-3. The Design Engineer is responsible for insuring all approved sources are viable for ALL the next level assemblies Note-4. Components not recommended for use on new design, shall have a "NOT RECM" at the end of the description title. COMPONENT ENG: DATE: A. SIDOROVSKY ENGINEER/REQUESTOR K. WHITE TITLE: PART NO: 03-12-2012 DIODE LED TRI COLOR RGB PLCC-6 (COMPUTER DATA BASE DESCRIPTION - 40 CHARACTERS MAXIMUM) Template: SOP5425-07 Rev. C 7011152 SHEET: REV: 1 of 23 01 7011152 - Rev 01 6-lead MULTILED Enhanced optical Power LED (ThinFilm / ThinGaN) Lead (Pb) Free Product - RoHS Compliant LRTB G6TG Vorlaufige Daten nach OS-PCN-2006-006-A1-B / Preliminary Data acc. to OS-PCN-2006-006-A1-B Besondere Merkmale * Gehausetyp: weies P-LCC-6 Gehause, Kontrasterhohung durch schwarze Oberflache (RGB-Displays) und diffusem Silikon Verguss * Besonderheit des Bauteils: additive Farbmischung durch unabhangige Ansteuerung aller Chips * Wellenlange: 625 nm (red), 528 nm (true green), 470 nm (blau) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: ThinFilm (rot), ThinGaN (true grun, blau) * optischer Wirkungsgrad: 43 lm/W (rot), 36 lm/W (true grun), 11 lm/W (blau) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: Reflow Loten * Vorbehandlung: nach JEDEC Level 4 * Gurtung: 12 mm Gurt mit 1000/Rolle, o180 mm oder 4000/Rolle, o330 mm * ESD-Festigkeit: ESD-sensitives Bauteil Features * package: white P-LCC-6 package, higher contrast by a black surface (RGB-Displays) and diffused silicone resin * feature of the device: additive mixture of color stimuli by independent driving of each chip * wavelength: 625 nm (red), 528 nm (true green), 470 nm (blue) * viewing angle: Lambertian Emitter (120) * technology: ThinFilm (red), ThinGaN (true green, blue) * optical efficiency: 43 lm/W (red), 36 lm/W (true green), 11 lm/W (blue) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: reflow soldering * preconditioning: acc. to JEDEC Level 4 * taping: 12 mm tape with 1000/reel, o180 mm or 4000/reel, o330 mm * ESD-withstand voltage: ESD sensitive device Anwendungen * Anzeigen im Innen- und Auenbereich (z.B. im Verkehrsbereich; Laufschriftanzeigen) * Getrennte Anteuerung der Leuchtdiodenchips zur Darstellung verschiedener Farben inclusive wei * Vollfarbdisplays bzw. RGB-Displays * Blitzlicht im Handy * Hinterleuchtung (LCD, Schalter, Tasten, Werbebeleuchtung, Allgemeinbeleuchtung) * Einkopplung in Lichtleiter Applications * indoor and outdoor displays (e.g. displays for traffic; light writing displays) * LED chips can be controlled seperately to display various colors including white * full color displays, RGB-Displays * strobe light for cellular phones * backlighting (LCD, switches, keys, illuminated advertising, general lighting) * coupling into light guides 2009-03-18 1 2 of 23 7011152 - Rev 01 LRTB G6TG Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 22 Type Color of Emission Luminous Intensity1) page 22 IF = 20 mA IV (mcd) red LRTB G6TG red true green blue true green blue 280 ... 900 710 ...1400 180 ...560 Bestellinformation Ordering Information Typ Type Bestellnummer Ordering Code LRTB G6TG-TV-1+VAW-36+ST7-69 Q65110A8544 Anm: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 6 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LRTB G6TG-TV-1+VAW-36+ST7-69 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen T, T5, T7, T9, U, U5, U7, U9 oder V enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LRTB G6TG-TV-1+VAW-36+ST7-69 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -3, -4, -5 oder -6 enthalten ist (siehe Seite 7 fur nahere Information). Z.B.: LRTB G6TG-TV-1+VAW-36+ST7-69 bedeutet, dass das Bauteil innerhalb der auf Seite 4 spezifizierten Grenzen geliefert wird. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 6 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LRTB G6TG-TV-1+VAW-36+ST7-69 means that only one group T, T5, T7, T9, U, U5, U7, U9 or V will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LRTB G6TG-TV-1+VAW-36+ST7-69 means that only 1 wavelength group -3, -4, -5, or -6 will be shippable (see page 7 for explanation). E.g. LRTB G6TG-TV-1+VAW-36+ST7-69 means that the device will be shiped within the specified limits as stated on page 4. In order to ensure availability, single wavelength groups will not be orderable. 2009-03-18 2 3 of 23 7011152 - Rev 01 LRTB G6TG Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values red Einheit Unit true green blue Betriebstemperatur Operating temperature range Top - 40 ... + 110 C Lagertemperatur Storage temperature range Tstg - 40 ... + 110 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 70 Stostrom Surge current tp = 10 s, D = 0.005, TA=25C IFM 100 Sperrspannung2) Seite 22 Reverse voltage2) page 22 (TA=25C) VR 12 5 Leistungsaufnahme Power consumption (TA=25C) Ptot 195 210 Rth JA Rth JA Rth JS 340 600 180 Warmewiderstand Thermal resistance Sperrschicht/Umgebung3) Seite 22 Junction/ambient3) page 22 Sperrschicht/Lotpad Junction/solder point 2009-03-18 1 chip on 3 chips on 50 300 340 600 180 mA 300 mA V mW 340 600 180 K/W K/W K/W 3 4 of 23 7011152 - Rev 01 LRTB G6TG Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 20 mA Dominantwellenlange4) Seite 22 Dominant wavelength4) page 22 IF = 20 mA Symbol Symbol Werte Values Einheit Unit red true green blue (typ.) peak 632 523 465 nm (min.) (typ.) (max.) dom 620 625 629 518.5 528 541.5 463.5 470 476.5 nm nm nm Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 20 mA (typ.) 18 33 25 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 Grad deg. Durchlassspannung5) Seite 22 Forward voltage5) page 22 IF = 20 mA (min.) (typ.) (max.) VF VF VF 1.8 2.1 2.4 2.9 3.2 3.7 2.9 3.2 3.7 V V V Sperrstrom Reverse current VR = 5 V (blue / true green); 12 V (red) (typ.) (max.) IR IR 0.02 10 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 20 mA; -10C T 100C (typ.) TCpeak 0.14 0.04 0.04 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 20 mA; -10C T 100C (typ.) TCdom 0.07 0.03 0.02 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 20 mA; -10C T 100C (typ.) TCV - 4.7 - 3.6 - 4.0 mV/K Optischer Wirkungsgrad Optical efficiency IF = 20 mA (typ.) opt 43 36 11 lm/W * Einzelgruppen siehe Seite 7 Individual groups on page 7 2009-03-18 4 5 of 23 7011152 - Rev 01 LRTB G6TG Farbortgruppen6) 7) Seite 22 6) 7) page 22 Chromaticity Coordinate Groups 7 OHA02721 0.9 520 530 0.8 540 510 550 0.7 505 3456 true green 0.6 560 570 500 0.5 580 590 600 610 620 630 red 495 0.4 490 0.3 485 0.2 480 8 blue 0.1 0 Gruppe Group 3 4 5 6 7 0 6 460 0.1 0.2 0.3 0.4 0.5 0.7 0.8 0.9 Cy Gruppe Group Cx Cy 0.112 0.741 6 0.139 0.038 0.150 0.672 0.152 0.057 0.182 0.689 0.147 0.071 0.153 0.757 0.132 0.050 0.137 0.756 0.132 0.050 7 0.169 0.686 0.147 0.071 0.205 0.692 0.141 0.087 0.181 0.757 0.124 0.065 0.164 0.760 0.190 0.693 8 0.130 0.054 0.145 0.075 0.230 0.686 0.139 0.097 0.212 0.747 0.121 0.075 0.194 0.752 0.121 0.075 9 0.216 0.687 0.139 0.097 0.257 0.673 0.131 0.126 0.243 0.733 0.110 0.104 0.692 0.308 0.681 0.309 0.695 0.295 0.707 0.293 red Anm.: Note: 0.6 Cx Die Farbkoordinaten des Mischlichtes konnen innerhalb des gekennzeichneten Bereichs des Farbdreiecks erwartet werden. The color coordinates of the mixed light can be expected within the marked area of the color triangle 2009-03-18 5 6 of 23 7011152 - Rev 01 LRTB G6TG Floating Bins red T = 280 ... 450 [mcd] T5 = 315 ... 500 [mcd] T7 = 355 ... 560 [mcd] T9 = 400 ... 630 [mcd] U = 450 ... 710 [mcd] U5 = 502 ... 799 [mcd] U7 = 560 ... 900 [mcd] U9 = 631... 1000 [mcd] V = 710... 1120 [mcd] Floating Bins true green V = 710 ... 1120 [mcd] V5 = 800 ... 1260 [mcd] V7 = 900 ... 1400 [mcd] V9 = 1000 ... 1590 [mcd] AW = 1120 ... 1800 [mcd] Floating Bins blue S = 180 ... 280 [mcd] S5 = 201 ... 315 [mcd] S7 = 224 ... 355 [mcd] S9 = 250... 400 [mcd] T = 280 ... 450 [mcd] T5 = 315 ... 500 [mcd] T7 = 355 ... 560 [mcd] 2009-03-18 6 7 of 23 7011152 - Rev 01 LRTB G6TG Wellenlangengruppen (Dominantwellenlange)4) Seite 22 Wavelength Groups (Dominant Wavelength)4) page 22 Gruppe Group true green Einheit Unit Gruppe Group min. max. 3 518.5 526.5 nm 4 523.5 531.5 5 528.5 6 533.5 blue Einheit Unit min. max. 6 463.5 467.5 nm nm 7 467.5 471.0 nm 536.5 nm 8 468.5 472.5 nm 541.5 nm 9 472.5 476.5 nm Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: T7-1+V7-4+R7-7 Example: T7-1+V7-4+R7-7 Helligkeitsgruppe Helligkeitsgruppe Wellenlange Helligkeitsgruppe Wellenlange Brightness Group Wellenlange (keine Gruppierung) Wavelength (no grouping) Brightness Group Wavelength Brightness Group Wavelength (red) (red) (true green) (true green) (blue) (blue) 1 V7 4 R7 7 T7 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Helligkeitsgruppe pro Farbe enthalten. Note: No packing unit / tape ever contains more than one brightness group per color. 2009-03-18 7 8 of 23 7011152 - Rev 01 LRTB G6TG Relative spektrale Emission6) Seite 22 Relative Spectral Emission6) page 22 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 20 mA OHL02514 100 % I rel 80 V 60 red blue true green 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik6) Seite 22 Radiation Characteristic6) page 22 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2009-03-18 0.8 0.6 0.4 0 20 40 60 80 100 120 8 9 of 23 7011152 - Rev 01 LRTB G6TG Durchlassstrom6) Seite 22 Forward Current6) page 22 IF = f (VF); TA = 25 C; red Relative Lichtstarke6) 7) Seite 22 Relative Luminous Intensity6) 7) page 22 IV/IV(20 mA) = f (IF); TA = 25 C OHL00573 102 mA OHL02525 101 IV IF I V (20 mA) 5 100 5 10 1 5 blue true green 10 -1 red 5 100 1.7 1.9 2.1 2.3 10-2 10 0 2.5 V 2.7 5 10 1 mA 10 2 IF VF Durchlassstrom6) Seite 22 Forward Current6) page 22 IF = f (VF); TA = 25 C; blue, true green Relative Lichtstarke6) Seite 22 Relative Luminous Intensity6) page 22 IV/IV(25 C) = f (Tj); IF = 20 mA OHL02359 10 2 IV mA IF OHL03513 1.6 I V (25 C) 5 1.4 1.2 10 1 1.0 5 0.8 blue true green red 0.6 10 0 2.5 3 3.5 4 0.4 -40 -20 4.5 V 5 20 40 60 C 100 Tj VF 2009-03-18 0 9 10 of 23 7011152 - Rev 01 LRTB G6TG Dominante Wellenlange6) Seite 22 Dominant Wavelength6) page 22 blue, dom = f (IF); TA = 25 C 478 nm Dominante Wellenlange6) Seite 22 Dominant Wavelength6) page 22 true green, dom = f (IF); TA = 25 C OHL02481 OHL02527 545 nm dom dom 476 535 474 530 472 525 true green 470 520 468 515 466 464 510 505 0 10 20 30 40 50 60 70 80 mA 100 IF 2009-03-18 0 20 40 60 80 mA 120 IF 10 11 of 23 7011152 - Rev 01 LRTB G6TG Maximal zulassiger Durchlassstrom rot Max. Permissible Forward Current red IF = f (T); 1 chip on IF Maximal zulassiger Durchlassstrom rot Max. Permissible Forward Current red IF = f (T); 3 chips on OHL01656 80 mA TS 70 60 IF TS 70 60 TA TA 50 50 40 40 30 30 total maximum power 20 dissipation of all 3chips 20 has to be limited to <400 mW TA temp. ambient TS temp. solder point 10 0 0 20 40 60 0 80 C 100 0 20 40 60 80 C 100 T Maximal zulassiger Durchlassstrom true grun Max. Permissible Forward Current true green IF = f (T); 3 chips on OHL01683 60 mA IF TS 50 TA temp. ambient TS temp. solder point 10 T Maximal zulassiger Durchlassstrom true grun Max. Permissible Forward Current true green IF = f (T); 1 chip on IF OHL01658 80 mA OHL01684 60 mA TS 50 TA 40 40 TA 30 30 20 20 dissipation of all 3chips total maximum power has to be limited to <400 mW 10 0 10 TA temp. ambient TS temp. solder point 0 20 40 60 0 80 C 100 T 2009-03-18 TA temp. ambient TS temp. solder point 0 20 40 60 80 C 100 T 11 12 of 23 7011152 - Rev 01 LRTB G6TG Maximal zulassiger Durchlassstrom blau Max. Permissible Forward Current blue IF = f (T); 1 chip on IF Maximal zulassiger Durchlassstrom blau Max. Permissible Forward Current blue IF = f (T); 3 chips on OHL01683 60 mA IF TS 50 OHL01684 60 mA TS 50 TA 40 40 TA 30 30 20 20 10 0 10 TA temp. ambient TS temp. solder point 0 20 40 60 0 80 C 100 T 2009-03-18 total maximum power dissipation of all 3chips has to be limited to <400 mW TA temp. ambient TS temp. solder point 0 20 40 60 80 C 100 T 12 13 of 23 7011152 - Rev 01 LRTB G6TG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); red (1 Chip on) Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); red (1 Chip on) OHL01709 0.12 IF A OHL01711 0.12 IF A 0.10 0.10 0.2 D= 0.2 0.005 0.01 0.02 0.05 0.1 0.5 0.08 0.08 1 D= 0.06 0.04 0.02 tP 0.02 tP IF D= T T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0.12 IF A D= 0.5 0.2 0.005 0.01 0.02 0.05 0.1 0.10 0.08 1 0.06 0.06 0.04 0.04 0.02 tP D= T tP OHL01724 tP D= T tP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.02 IF T 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 2009-03-18 T Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); red (3 Chips on) OHL01723 0.10 IF tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); red (3 Chips on) 0.12 IF A tP 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp 0.08 1 0.04 tP D= T 0.5 0.06 0.005 0.01 0.02 0.05 0.1 tp 13 14 of 23 7011152 - Rev 01 LRTB G6TG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); true green (1 Chip on) Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); true green (1 Chip on) 0.35 IF A 0.30 OHL01725 t 0.35 IF A 0.30 tP IF D = TP T 0.25 0.15 0.10 t T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.05 IF D = TP 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 OHL01726 tP 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); true green (3 Chips on) 0.35 IF A 0.30 0.25 0.20 0.15 0.10 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); true green (3 Chips on) OHL01734 t D = TP T 0.35 IF A 0.30 D= 0.25 tP IF 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 t IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2009-03-18 OHL01735 tP 14 15 of 23 7011152 - Rev 01 LRTB G6TG Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); blue (1 Chip on) Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); blue (1 Chip on) 0.35 IF A 0.30 OHL01725 t 0.35 IF A 0.30 tP IF D = TP T 0.25 0.15 0.10 t T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 0.05 IF D = TP 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 OHL01726 tP 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 25 C IF = f (tp); blue (3 Chips on) 0.35 IF A 0.30 0.25 0.20 0.15 0.10 Zulassige Impulsbelastbarkeit Permissible Pulse Handling Capability Duty cycle D = parameter, TA= 85 C IF = f (tp); blue (3 Chips on) OHL01734 t D = TP 0.35 IF A 0.30 tP IF T 0.25 D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.20 0.15 0.10 t IF D = TP T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.05 0.05 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2009-03-18 OHL01735 tP 15 16 of 23 7011152 - Rev 01 LRTB G6TG Mazeichnung8) Seite 22 Package Outlines8) page 22 2 (0.079) 3.5 (0.138) 3.1 (0.122) 2.8 (0.110) 1.6 (0.063) 0...0.15 (0.006) 2.6 (0.102) A1 Package marking C2 C1 C3 A3 A1 C2 A2 0.9 (0.035) 0.4 (0.016) 3.6 (0.142) 3.2 (0.126) 3.2 (0.126) 2.8 (0.110) (2.5 (0.098)) C1 C3 A3 A2 0.6 (0.024) 0.4 (0.016) 0.7 (0.028) 0.5 (0.020) 0.5 (0.020) 0.3 (0.012) 0.7 (0.028) 0.5 (0.020) GPLY6118 C1 Cathode Red (R) A1 Anode Red (R) C2 Cathode True Green (T) A2 Anode True Green (T) C3 Cathode Blue (B) A3 Anode Blue (B) Gewicht / Approx. weight: 40 mg Gurtung / Polaritat und Lage8) Seite 22 Verpackungseinheit 1000/Rolle, o180 mm oder 4000/Rolle, o330 mm Method of Taping / Polarity and Orientation8) page 22 Packing unit 1000/reel, o180 mm or 4000/reel, o330 mm 0.3 (0.012) max. 8 (0.315) 2009-03-18 2...3 3.7 (0.146) 3.5 (0.138) 1.5 (0.059) 2.05 (0.081) 1.75 (0.069) 2 (0.079) 12 (0.472) 4 (0.157) 5.5 (0.217) 1.5 (0.059) A2 C2 A1 A3 C3 C1 OHTY0042 16 17 of 23 7011152 - Rev 01 LRTB G6TG Empfohlenes Lotpaddesign8) 9) Seite 22 Recommended Solder Pad8) 9) page 22 Reflow Loten Reflow Soldering 0.8 (0.031) Gehausemarkierung Package marking 0.8 (0.031) Gehausemarkierung Package marking 1.4 (0.055) 4.7 (0.185) A2 C2 A1 A3 C3 C1 16 mm 2 per anode pad for improved heat dissipation 0.35 (0.014) 0.35 (0.014) 0.6 (0.024) Lotstopplack Solder resist OHPY0031 Empfohlenes Platinendesign fur cluster mit 6-lead TOPLED in Serienschaltung Recommended PCB-Design for cluster with 6-lead TOPLED in Series Connection Anode 1 Cathode 2 Anode 2 Cathode 3 Anode 3 Cathode 1 2009-03-18 OHPY2398 17 18 of 23 7011152 - Rev 01 LRTB G6TG Lotbedingungen Soldering Conditions IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T Vorbehandlung nach JEDEC Level 4 Preconditioning acc. to JEDEC Level 4 (nach J-STD-020B) (acc. to J-STD-020B) 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 s 250 t 2009-03-18 18 19 of 23 7011152 - Rev 01 LRTB G6TG Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lxxx xxxx Bin1: Bin Information Color 1 Bin2: Bin Information Color 2 Product Name Bin3: Bin Information Color 3 pl e Semiconductors RoHS Compliant ML Temp ST 2 245 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type Color 1 Color 2 Color 3 (G) GROUP: X-X-X+X-X-X+X-X-X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA32043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm Leader: 400 mm Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W P0 P1 P2 D0 E F 12 + 0.3 - 0.1 2 0.05 8 0.1 1.5 + 0.1 1.75 0.1 5.5 0.05 4 0.1 (0.157 0.004) (0.315 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.217 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 330 (13) 12 (0.472) 60 (2.362) 12.4 + 2 (0.488 + 0.079) 18.4 (0.724) 2009-03-18 19 20 of 23 7011152 - Rev 01 LRTB G6TG Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print Barcode label L VE el LE see . lab e H) nk, (R bla cod If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs d nta ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co ce is UR 24 6 da e y MI 40 be tim C h e ThISTSE l pro < tor tim or ). 23 tim e at t wilnt l wit or fac C MO Flo s tim TO at or ca at re. Flo tha ale el d or nth OP nti Flo du uiv if: rea es l 4 5 Flo lab mo ce ide eq low g, l ve vic is or be de 24 tin en l 5a6 pro ve Le de , e te co , g: un wh ve l Le ke r se da ba ed low ure Le ve mo % ba e ba al ure Le ist en ref e e 10 tim ure for se ist ale op se for > , Mo se 3 ist ure is or . , is ha se Mo nk be ist nk g rd -03 Mo in Flo r-p RH g, bla Mo ba TD po If bla hin % life s kin Ca (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs er Ye tem ted Sh at ed low uir > 1 WeHo un Aft Ind no uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is vic tim e b) or e Hu Flo en tim or De 2a kin nc te Flo op a) or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo Mo ist Mo N TIO U A C O S R A M d Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label : DE MY 18 R -1 +Q -1 P OU P: GR 44 01 C: 00 D/ D) (9 34 20 : (Q )Q TY O S BA TC P) (6 LO T T) (1 NO : (X ) PR OD 5 14 2 110 0 M DE -1 18 OU (G ) GR P: P -1 +Q R u L lt S iT Y O T67 P L 6 8 01 99 D/ C: TY : O SR AM 20 00 21 D) 00 (9 21 : 34 )Q (Q ic 5 (X ) PR OD NO : (1 T) 11 00 LO T 14 2 S NO O 12 H em H S BA TC 3G NO (6 P) : 12 R A on M du O p ct to or s 44 M 2100 Y E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: MO TO OP Muster (G ) M ul LS ti Y TO T6 P 76 LE Muster 8 2199 S /60 C 12 RH % e H . dit mi ag 3G el see . lab e H) nk, (R bla cod y bar d _ < s ur s ). Ho ur s s de Ho urur co 72 Ho te 48 e Ho 24 6 da tim e e th tim or ). 23 tim e at t wi ntC l wi fac Flo oror tim s at e. ca at Flo tha ale el or ur nth nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, oc ve l vic is be or de 24 tin en l 5a6 pr Le ve de e te co , w, g: ve l un wh e Le ke r se da ur e ba ed flo Le ve mo % ba e ba al d e Le ist ur en re e 10 e tim ur e se for ale op se for > , Mo istist ur se is or . , is ha 33 se Mo nk be ist nk g rd -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. wi 10 ba tor J-S thi va p. elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W flo no un ire DE Ho Af qu Ind 1. e 4 8 re dy ed re y is qu JE 2. bo Mo or tim e e 16 re C/ : es dit2b a) St tim or mi ed or g is IP tim e vic b) Hu Flo oror en tim De 2a kin ce te Flo a) op or 3. b) ba en Flo da e 1 fer l Flo If al re tim ve l 2 2a 4. se d Le ve l l 3 g an e Le ve Ba te ur e Le ve Le ist ur e Da ur e Mo istist ur Mo ist Mo Mo NO : 12 If hu ive em R ic AM on du O ct pto or H NO s L VE LE re lat ra ck re 30 N s IVE RS inf pa % k ainIT TO of to 90 ea d ntNSUC < ns (p TIO or d , cteg itio U g coSEND an bje C sin nd 5 C su es CO Ais baRE co y 40 be oc TU MI CThIS C < tor ll pr SE D Bi Bin1 Bi n2 : Pn3 : Q- 1ML : 1- 20 20 2 Te 2a 22 mp 3 24 0 ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label Packing Sealing label 2009-03-18 OHA02044 20 21 of 23 7011152 - Rev 01 LRTB G6TG Revision History: 2009-03-18 Previous Version: 2007-10-10 Page Subjects (major changes since last revision) Date of change 1 acc. to OS-PCN-2006-006-A 2006-02-01 9 Relative Luminous Intensity 2006-03-31 4 acc. to OS-PCN-2006-006-A1-B 2006-05-04 9 Diagram Relative Luminous Intensity f (Tj) changed 2007-08-24 2, 6 ordering code changed 2007-10-05 2, 6 ordering code changed 2009-03-18 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 22 may only be used in life-support devices or systems11) page 22 with the express written approval of OSRAM OS. 2009-03-18 21 22 of 23 7011152 - Rev 01 LRTB G6TG Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. Funoten: 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Die LED kann kurzzeitig in Sperrichtung betrieben werden. RthJA ergibt sich bei Montage auf PC-Board FR 4 (Padgroe 16 mm2 je Pad) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 fur red Mae werden wie folgt angegeben: mm (inch) Gehause halt TTW-Lothitze aus nach CECC 00802 2) 3) 4) 5) 6) 7) 8) 9) 10) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 11) Driving the LED in reverse direction is suitable for short term application. RthJA results from mounting on PC board FR 4 (pad size 16 mm2 per pad) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 for red Dimensions are specified as follows: mm (inch) Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered. Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2009-03-18 22 23 of 23