SMBTA42/MMBTA42 NPN Silicon Transistor for High Voltages 3 High breakdown voltage Low collector-emitter saturation voltage Complementary types: SMBTA92 (PNP) 2 1 Type Marking SMBTA42/MMBTA42 s1D Pin Configuration 1=B 2=E VPS05161 Package 3=C SOT23 Maximum Ratings Parameter Symbol Collector-emitter voltage VCEO 300 Collector-base voltage VCBO 300 Emitter-base voltage VEBO 6 DC collector current IC 500 Base current IB 100 Total power dissipation, TS = 74 C Ptot 360 mW Junction temperature Tj 150 C Storage temperature Tstg Value Unit V mA -65 ... 150 Thermal Resistance Junction - soldering point1) RthJS 210 K/W 1For calculation of R thJA please refer to Application Note Thermal Resistance 1 Feb-21-2003 SMBTA42/MMBTA42 Electrical Characteristics at TA = 25C, unless otherwise specified. Parameter Symbol Values Unit min. typ. max. V(BR)CEO 300 - - V(BR)CBO 300 - - V(BR)EBO 6 - - ICBO - - 100 nA ICBO - - 20 A IEBO - - 100 nA DC Characteristics Collector-emitter breakdown voltage V IC = 1 mA, IB = 0 Collector-base breakdown voltage IC = 100 A, IE = 0 Emitter-base breakdown voltage IE = 100 A, IC = 0 Collector cutoff current VCB = 200 V, IE = 0 Collector cutoff current VCB = 200 V, IE = 0 , TA = 150 C Emitter cutoff current VEB = 3 V, IC = 0 DC current gain 1) - hFE IC = 1 mA, VCE = 10 V 25 - - IC = 10 mA, VCE = 10 V 40 - - IC = 30 mA, VCE = 10 V 40 - - VCEsat - - 0.5 VBEsat - - 0.9 50 - - MHz - - 4 pF Collector-emitter saturation voltage1) V IC = 20 mA, IB = 2 mA Base-emitter saturation voltage 1) IC = 20 mA, IB = 2 mA AC Characteristics Transition frequency fT IC = 10 mA, VCE = 20 V, f = 100 MHz Collector-base capacitance Ccb VCB = 20 V, f = 1 MHz 1) Pulse test: t < 300s; D < 2% 2 Feb-21-2003 SMBTA42/MMBTA42 Total power dissipation Ptot = f(TS) Transition frequency fT = f (IC) VCE = 10V, f =100MHz 400 10 3 mW SMBTA 42/43 EHP00839 MHz fT 320 Ptot 280 240 10 2 200 160 5 120 80 40 0 0 15 30 45 60 75 10 1 10 0 C 150 TS 90 105 120 5 10 1 5 10 2 mA 5 C Permissible pulse load Operating range IC = f (VCEO) Ptotmax / PtotDC = f (tp ) TA = 25C, D = 0 10 3 SMBTA 42/43 EHP00840 Ptot max 5 Ptot DC D= 10 3 SMBTA 42/43 EHP00841 mA tp tp T 10 3 C T 10 2 10 2 5 10 1 10 s 5 D= 0 0.005 0.01 0.02 0.05 0.1 0.2 0.5 10 1 100 s 1 ms 5 100 ms DC 10 5 500 ms 0 5 10 0 10 -6 10 -5 10 -4 10 -3 10 -2 s 10 10 -1 10 0 0 tp 5 10 1 5 10 2 V 5 10 3 V CEO 3 Feb-21-2003 SMBTA42/MMBTA42 Collector cutoff current ICBO = f (TA) Collector current IC = f (VBE) VCB = 160V VCE = 10V 10 4 nA CBO 10 5 SMBTA 42/43 EHP00842 10 3 SMBTA 42/43 EHP00843 mA C max 3 10 2 5 10 2 5 10 1 typ 10 1 5 5 10 0 10 5 0 5 10 -1 10 -1 0 50 0 C 150 100 0.5 V 1.0 1.5 V BE TA DC current gain hFE = f (IC ) VCE = 10V 10 3 SMBTA 42/43 EHP00844 5 h FE 10 2 5 10 1 5 10 0 -1 10 5 10 0 5 10 1 5 10 2 mA 10 3 C 4 Feb-21-2003 Package SOT23 Package Outline 1.1 MAX. 2.9 0.1 2 2.6 MAX. 10 MAX. 1.3 0.1 1 +0.2 acc. to DIN 6784 10 MAX. 3 0.4 +0.1 -0.05 0.1 MAX. B A 0.08...0.15 C 0.95 2... 30 1.9 0.25 M B C 0.20 M A Foot Print 0.9 1.1 0.9 0.8 0.8 1.2 Marking Layout Manufacturer Pin 1 Date code (Year/Month) 2003, July Type code BCW66 Example Packing Code E6327: Reel o180 mm = 3.000 Pieces/Reel Code E6433: Reel o330 mm = 10.000 Pieces/Reel 4 0.2 Pin 1 3.15 8 2.65 2.13 0.9 1.15 Impressum Published by Infineon Technologies AG, St.-Martin-Strasse 53, 81669 Munchen (c) Infineon Technologies AG 2005. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office (www.Infineon.com). Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in life-support devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered.