u
s
t
ness
Global: Reliable safety solutions
»
»»
»
Robust: Even in severe environments
Compact: Easy installation
F3W-MA Smart Muting Actuator
Combine with F3SG-R Safety Light Curtains
Thinnest part 2.5 mm
35 mm
35 mm
Smart muting actuator
reduces adjustment time
by 80%*
The use of the dedicated actuator
can significantly reduce the
time required to adjust the sensor
to detect workpieces even in
unstable conveying conditions.
*Compared to the previous model
(Based on OMRON investigation in
September 2014)
Since bypass processing to
disable the safety light curtain
was performed via the PLC,
programming before installation
required time and work. It also
took a lot of time and work to
install and adjust many muting
sensors (sensors and reflectors).
Many processes including programming
and adjustment were required
Previously…
0 10 20 30 40 50 60 70 80 90 100
Reduced by 80%
Previous
model
F3SG-R
■ Installation ■ Wiring ■ Adjustment ■ Troubleshooting ■ Maintenance
F3SG
B1
Reflector
A2
Sensor A1
PLC
For global use in almost any environment
For global use
For harsh environments
NPN PNP
Global
GB
ISO
IEC
IP67IP67
Secured against torsion
F3SG-R
PNP or NPN can be selected with
the DIP switch. The same cables
are used.
When using longer length
curtains, torsional alignment can
be reduced.
IP67 protection allows use in environments
that are subject to water.
The F3SG-R conforms to major
international standards including
Chinese GB standards
Increasing both productivity and safety
The F3SG-R provides advanced muting function that detects the
zone where workpieces pass or the position of a machine or robot
and disable beams of the detected part. This increases both safety
and productivity.
By adding the smart muting actuator, the F3SG-R provides stable
operation even for the production lines where errors occur due to
vibration caused by the passing workpiece.
The muting actuator detects the surface of a passing workpiece. Even if a workpiece
moves due to vibration, muting is kept enabled until the workpiece has passed. This
prevents unexpected machine stops.
The point detection muting sensor mistakenly disabled muting while a workpiece was
passing, which led to unexpected machine stops.
Previously…
Smart muting actuator
Robust and compact housing
All models are equipped with a robust housing that can be used in
harsh conditions and withstand shocks caused by sudden human
contact or a dropped tool. The scratch-resistant material is used for
the optical surface to prevent unexpected machine stops.
Slim housing
The housing structure is significantly improved to enhance resistance against shock
and vibration and to reduce the thickness of the thinnest part of the housing material from
3 mm to 2.5 mm.
Protected with protection cover
Work
piece
The optical surface can be protected from contact with workpieces by using the optional
protection cover together.
The robust housing can be used in
harsh conditions and withstand
shocks caused by sudden human
contact or a dropped tool.
The scratch-resistant material is
used for the optical surface to
prevent unexpected machine stops.
Cross-section is
Approx. 60%
of previous model
Downsized
F3SG-R
F3SR
MS48
The F3SG-R is designed to be used in a variety of environments
around the world, conforming to international standards.
4 5
New muting functionality
Increases both productivity and safety
Easily distinguishes between workers and objects
Auto-conf iguration of muting zone
When workpieces with various heights are conveyed on the
same line, partial muting is automatically performed based on
the height of the workpiece. This advanced muting function can
automatically perform normal detection at the zone where a
workpiece does not pass.
Automatically minimizes muting zone according to workpiece size
When the muting sensor detects that a workpiece passes,
all beams are muted.
1
2
Minimizing setting and
detection errors
The function to log the muting sensor operating conditions of
the F3SG-R visualizes the installation position and setting conditions
of the sensor to achieve reliable configuration. The stop due to
the muting error can be analyzed using the data stored in the F3SG-R.
Quick identification of the cause can reduce unexpected
machine downtime.
Detecting both objects and workers
With the Reduced Resolution function that is used to change the
number of interrupted beams (1 to 3 beams), the F3SG-R can detect
human entry while workability is maintained. This makes it easier to
distinguish between objects and workers.
Preventing accidental stops due to small debris
This function is used to prevent nuisance trips of small objects such as
insects or small debris; like soot/dust particles. Accidental machine
stops can be avoided.
・ Keep the safety outputs ON even when an
object like a transport vehicle (with the size of 1
to 3 beams) is present intermittently.
・Turn safety outputs OFF when an object with
the size over 3 beams, like an ankle.
Helps prevent workers from being trapped
Ensuring safe restart
The Pre-reset function prevents possible accidents and supports safe
restart of machines. Even if a worker presses the reset switch of the
safety light curtain without noticing another worker near the robot,
restart will not be executed, unless certain conditions are met.
2 Get out of the
hazardous zone
(safety fence)
1 Press the
pre-reset switch in
the hazardous zone
(safety fence)
3 Press the reset
switch in the
control panel to
restart the F3SG-R.
The machine is
ready for restart.
The machine cannot be restarted until the pre-reset switch is pressed to restart the F3SG-R.
1
3
2
Visualized data
makes adjustment
smooth!
The only beams interrupted by the workpiece are kept muted and
other beams are released from the muting state three seconds after
the workpiece pass through the safety light curtain. Muting is
disabled after the workpiece has passed.
Monitors human entry into
the zone where a
workpiece does not pass.
Keeps the zone
muted when a
workpiece passes.
6 7
Powerful features
Prevent unexpected machine stops
Ensure stable operation
Smart Muting Actuator
F3W-MA
Integrated muting sensor based
on multi-beam photoelectric
sensor
•A muting system can be configured easily in
combination with the F3SG safety light curtain.
• Muting functions can be stably performed even
when workpieces with holes pass.
Ordering Information
Smart Muting Actuator
Accessories (Sold separately)
Single-ended Connector Cable
Appearance Model Beam Gap between
Muting Trigger Beams
Number of
Beams
F3W-MA0100P 100mm 8
F3W-MA0300P 300mm 20
Appearance Type Cable
length Model Specifications
For emitter
3 m F39-JG3A-L
Emitter cable:M12 connector (5-pin), 5 wires
Color: Gray
7 m F39-JG7A-L
10 m F39-JG10A-L
15 m F39-JG15A-L
20 m F39-JG20A-L
For receiver
3 m F39-JG3A-D
M12 connector (8-pin), 8 wires
Color: Black
7 m F39-JG7A-D
10 m F39-JG10A-D
15 m F39-JG15A-D
20 m F39-JG20A-D
4
F3W-MA
Double-ended Cable
Sensor Mounting Brackets
Appearance Type Cable
length Model Specifications
For emitter
0.5 m F39-JGR5B-L
M12 connector (5-pin) on both ends
Color: Gray
1 m F39-JG1B-L
3 m F39-JG3B-L
5 m F39-JG5B-L
7 m F39-JG7B-L
10 m F39-JG10B-L
15 m F39-JG15B-L
20 m F39-JG20B-L
For receiver
0.5 m F39-JGR5B-D
M12 connector (8-pin) on both ends
Color: Black
1 m F39-JG1B-D
3 m F39-JG3B-D
5 m F39-JG5B-D
7 m F39-JG7B-D
10 m F39-JG10B-D
15 m F39-JG15B-D
20 m F39-JG20B-D
Appearance Specification Model Application Remarks
Standard Fixed
Bracket F39-LGF
Bracket to mount the F3W-MA.
Side mounting and backside mounting
possible.
Two brackets per set
Standard
Adjustable
Bracket
F39-LGA
Bracket to mount the F3W-MA.
Beam alignment after mounting
possible.The angle adjustment range is
±15°.
Side mounting and backside mounting
possible.
Two brackets per set
5
F3W-MA
Ratings/Specifications
F3W-MA0100P F3W-MA0300P
Perfor-
mance
Beam Gap between Muting Trigger
Beams 100mm 300mm
Number of Beams 820
Standard Detection Object 30mm
Operating
Range
Long 0.3 to 20.0 m (1 to 65 ft.)
Short 0.3 to 7.0 m (1 to 23 ft.)
Response Time
Operation 13 ms max.
Reset 26 ms max. (Synchronized)
78 ms max. (Not synchronized)
Effective Aperture Angle ±2.5° max., emitter and receiver at operating range of 3 m or greater
Light Source Infrared LEDs, Wavelength: 870 nm
Startup Waiting Time 2 s max.
Electrical
Power Supply Voltage (Vs) SELV/PELV 24 VDC±20% (ripple p-p 10% max.)
Current
Consumption
Emitter 35mA 45mA
Receiver 75mA 75mA
Muting Outputs
Two PNP transistor outputs.
Load current of 300 mA max.,
Residual voltage of 2 V max. (except for voltage drop due to cable extension)j
Output Opera-
tion Mode
Muting Output A Dark-ON
(Muting Output A is enabled when MuteA trigger beam is blocked.)
Muting Output B Dark-ON
(Muting Output B is enabled when MuteB trigger beam is blocked.)
Input Voltage
ON Voltage [MuteEnable]
Vs to Vs-3 V (sink current 5 mA max.) *
OFF Voltage [Mute Enable]
0 to 1/2 Vs, or open *
* The Vs indicates a supply voltage value in your environment.
Indicators Refer to page 40. LED Indicator Status
Protective Circuit Protective Circuit Output short protection, Power supply reverse polarity protection
Insulation Resistance 20 MΩ or higher (500 VDC megger)
Dielectric Strength 1,000 VAC, 50/60 Hz (1 min)
Functional
Functions
- Scan Code Selection
- Operation Mode Selection (Point to Point Detection/ Chattering and Void Space
Prevention)
- Off-Delay
- Muting Enable
- Muting Trigger Beam Allocation
- Operating Range Selection
Environ-
mental
Ambient
Temperature
Operating -10 to 55°C (13 to 131°F) (non-icing)
Storage -25 to 70°C (-13 to 158°F)
Ambient
Humidity
Operating 35% to 85% (non-condensing)
Storage 35% to 95%
Ambient Illuminance Incandescent lamp: 3,000 Ix max. on receiver surface
Sunlight: 10,000 Ix max. on receiver surface
Degree of Protection (IEC 60529) IP65/IP67
Vibration Resistance (IEC 61496-1) 10 to 55 Hz, Multiple amplitude of 0.7 mm, 20 sweeps for all 3 axes
Shock Resistance (IEC 61496-1) 100 m/s2, 1000 shocks for all 3 axes
Pollution Degree (IEC 60664-1) Pollution Degree 3
Connec-
tions Extension of Power Cable 100 m max.
Note: For T-Shaped configuration with COM lines, the length of cable extension is 30m max.
Material Housing: Aluminum, Cap: PBT, Front Window: PMMA, Cable: Oil resistant PVC, FE
plate: SUS
Weight (packaged) 1.8 kg max. 2.8 kg max.
Included Accessories Instruction Sheet
6
F3W-MA
LED Indicator Status
Shown below are indication statuses of F3W-MA LED indicators when you purchased.
Emitter
Receiver
Name of Indicator Color Illuminated Blinking
Operating range LONG Green Long Range mode is selected by DIP Switch. -
Running RUN Green Power is ON. -
Error ERR Red - Error in emitter. Generic error happens.
Name of Indicator Color Illuminated Blinking
Top-beam-state TOP Blue The top beam is unblocked. -
Muting output A MUTE A Green Muting Output A is activated. -
Muting output B MUTE B Green Muting Output B is activated. -
Off-Delay DELAY Yellow Off-Delay function is enabled by DIP Switch. -
Chattering/ Void
space CHAT Green Chattering and Void Space Prevention mode is se-
lected by DIP Switch. -
Muting Enable MUTE
DISABLE Red The Muting Enable function is enabled and Muting
Enable input is turned OFF by DIP Switch. -
Error ERR Red -Error in receiver. Generic error happens.
Stable-state STB Green Incident light level is 170% or higher of ON-threshold -
Running RUN Green Power is ON. -
Communication COM Green Synchronization between emitter and receiver is
maintained.
[Primary sensor]
- Start-up (for approx. 3 s)
- Synchronization between emitter
and receiver is lost
Bottom-beamstate BTM Blue The bottom beam is unblocked. -
7
F3W-MA
Wiring Examples
Standard Muting Mode with F3SG-R (T-Shaped Configuration with COM lines)
Muting output A:
Black
Muting output B:
White
24 VDC:
Brown
0 VDC:
Blue
F3W-MA Receiver
(Primary)
CFG Out:
Red
COM-:
Pink
COM+:
Gray
Mute Enable:
Yellow
F3W-MA Receiver
(Secondary)
Muting output A:
Black
Muting output B:
White
COM-:
Pink
COM+:
Gray
CFG Out:
Red
CFG In:
Yellow
0 VDC:
Blue
24 VDC:
Brown
F39-JG@A-D F39-JG@A-DFunctional Earth Functional Earth
24 VDC:
Brown
0 VDC:
Blue
F3W-MA Emitter
(Primary)
CFG In *2:
Black
COM-:
Yellow
COM+:
White
F3W-MA Emitter
(Secondary)
COM-:
Yellow
COM+:
White
0 VDC:
Blue
24 VDC:
Brown
F39-JG@A-L F39-JG@A-LFunctional Earth Functional Earth
F3SG-RA Emitter *1
CFG In:
Black
Power Supply
+24 VDC
0 VDC
Power Supply
+24 VDC
0 VDC
Note 1. For the wiring of safety light curtains such as F3SG-R, refer to the applicable user's manual separately.
Note 2. For devices connecting to the F3W-MA, the same power supply must be used.
[DIP Switch settings (F3SG-RA)]
Scan Code: Code A
[DIP Switch settings (F3W-MA-Primary)]
Scan Code: Code B
Muting Enable: Disabled
[DIP Switch settings (F3W-MA-Secondary)]
Not used
(F3W-MA-Secondary)]
[DIP Switch settings (F3SG-RA)]
Scan Code: Code A
[DIP Switch settings (F3W-MA-Primary)]
Scan Code: Code B
[DIP Switch settings
Not used
*1. Signal wiring of the F3W-MA is not required.
*2. Do not connect CFG In line to +24 VDC line. Otherwise, F3W-MA enters the error state.
[Emitter]
[Receiver]
F3SG-RA Receiver
MUTE B
MUTE A
8
F3W-MA
Exit-Only Muting Mode with F3SG-R (L-Shaped Configuration)
S1: Mute Enable Switch
Muting output A:
Black
Muting output B:
White
24 VDC:
Brown
0 VDC:
Blue
F3W-MA Receiver
CFG Out:
Red
COM-:
Pink
COM+:
Gray
Mute Enable:
Yellow
S1
F39-JG@A-D Functional Earth
F3SG-RA Receiver
24 VDC:
Brown
0 VDC:
Blue
F3W-MA Emitter
CFG *2:
Black
COM-:
Yellow
COM+:
White
F39-JG@A-L Functional Earth
F3SG-RA Emitter *1
Power Supply
+24 VDC
0 VDC
Power Supply
+24 VDC
0 VDC
[DIP Switch settings (F3SG-RA)]
Scan Code: Code B
[DIP Switch settings (F3W-MA)]
Scan Code: Code A
Muting Enable: Enabled
[DIP Switch settings (F3SG-RA)]
Scan Code: Code B
[DIP Switch settings (F3W-MA)]
Scan Code: Code A
*1. Signal wiring of the F3W-MA is not required.
Note 1. For the wiring of safety light curtains such as F3SG-R, refer to the applicable user's manual separately.
Note 2. For devices connecting to the F3W-MA, the same power supply must be used.
*2. Do not connect CFG In line to +24 VDC line. Otherwise, F3W-MA enters the error state.
[Emitter]
[Receiver]
MUTE B
MUTE A
9
F3W-MA
Standard Muting Mode with Other Safety Component(T-Shaped Configuration)
Muting output A:
Black
Muting output B:
White
24 VDC:
Brown
0 VDC:
Blue
F3W-MA Receiver 1
CFG Out:
Red
COM-:
Pink
COM+:
Gray
Mute Enable:
Yellow
F3W-MA Receiver 2
Muting output A:
Black
Muting output B:
White
COM-:
Pink
COM+:
Gray
CFG Out:
Red
Mute Enable:
Yellow
0 VDC:
Blue
24 VDC:
Brown
F39-JG
@
A-D F39-JG
@
A-DFunctional Earth Functional Earth
Safety Light Curtain (SLC)
Emitter *1
24 VDC:
Brown
0 VDC:
Blue
F3W-MA Emitter 1
CFG In:
Black
COM-:
Yellow
COM+:
White
F3W-MA Emitter 2
COM-:
Yellow
COM+:
White
0 VDC:
Blue
24 VDC:
Brown
F39-JG
@
A-L F39-JG
@
A-LFunctional Earth Functional Earth
Safety Light Curtain (SLC)
Receiver *1
CFG In:
Black
Power Supply
+24 VDC
0 VDC
Power Supply
+24 VDC
0 VDC
[SLC settings]
- Muting system
- Emitters and receivers of F3W-MA and
SLC mounted back-to-back
[DIP Switch settings (F3W-MA-1)]
Scan Code: Code A
Muting Enable: Enabled
[DIP Switch settings (F3W-MA-2)]
Scan Code: Code B
[SLC settings]
- Muting system
- Emitters and receivers of F3W-MA and SLC
mounted in alternation
[DIP Switch settings (F3W-MA-1)]
Scan Code: Code A
[DIP Switch settings (F3W-MA-2)]
Scan Code: Code B
*1. Signal wiring of the F3W-MA is not required.
[Emitter]
[Receiver]
S1
S1: Mute Enable Switch
Safety
Controller *2
IN1 IN2
*1. Signal wiring of the F3W-MA is not required.
Note 1. For the wiring of safety light curtains such as F3SG-R, refer to the applicable user's manual separately.
Note 2. For devices connecting to the F3W-MA, the same power supply must be used.
*2. Connectable Safety Control Units:
NE1A and G9SP series with a muting function
10
F3W-MA
Input/Output Circuit
TheentirecircuitdiagramoftheF3W-MAisshownbelow.
Thenumbersinthecirclesindicatetheconnector'spinnumbers.
2
1
5
7
6
+24 VDC
1
Brown
Blue
Brown
White Muting Output B
Black Muting Output A
Blue
3
Muting Enable
input circuit
Yellow Muting Enable
0 VDC
Indicator
Emitter
Main Circuit
Receiver
Main Circuit 2
Receiver
Main Circuit 1
Indicator
Load
Load
11
F3W-MA
Mounted with Standard Adjustable Brackets (F39-LGA) (Unit : mm)j
Mounted with Standard Adjustable Brackets (F39-LGA)
Backside Mounting
< Screw: M5 or M6 >
Model F3W-MA0100P F3W-MA0300P
Dimension A 208 478
Dimension C1 190 430
Dimension D 140 410
Dimension P 20 20
Number of Standard
Adjustable Brackets 22
Standard
Adjustable Bracket
(F39-LGA)
Standard
Adjustable Bracket
(F39-LGA)
35
48.6
50.35
2-M5 or M6
2-M5 or M6
35
A
72
9.2
72
6.4
84
P
72
24.85
150 max
150 max
D
C1
18
43
A
24.85
150 max
150 max
12
F3W-MA
Side Mounting
Standard Adjustable Bracket(F39-LGA)
50.35
Standard
Adjustable Bracket
(F39-LGA)
Standard
Adjustable Bracket
(F39-LGA)
35
A
48.6
2-M5 or M6
2-M5 or M6
72 72
35
6.4
9.2
84
72
150 max 150 max
42.35
A
150 max 150 max
P
D
C118
43
< Screw: M5 or M6 >
Model F3W-MA0100P F3W-MA0300P
Dimension A 208 478
Dimension C1 190 430
Dimension D 140 410
Dimension P 20 20
Number of Standard
Adjustable Brackets 22
8
72
42
45.1
84
9.2
6.4
32.9
31.8
34.5
Material: ZDC2, Fluorine-containing lubricant
13
F3W-MA
Mounted with Standard Fixed Brackets (F39-LGF)
Backside Mounting
2-M5 or M6
2-M5 or M6
A
6.4
51 51
35
9.2
66
Standard
Fixed Bracket
(F39-LGF)
Standard
Fixed Bracket
(F39-LGF)
35
40
50.35
D
P
24.85
51
150 max
150 max
C1
18
43
24.85
A
150 max
150 max
< Screw: M5 or M6 >
Model F3W-MA0100P F3W-MA0300P
Dimension A 208 478
Dimension C1 190 430
Dimension D 140 410
Dimension P 20 20
Number of Standard
Fixed Brackets 22
14
F3W-MA
Side Mounting
Standard
Fixed Bracket
(F39-LGF)
Standard
Fixed Bracket
(F39-LGF)
A
35
40
2-M5 or M6
2-M5 or M6
51
9.2
51
35
6.4
66
50.35
51
150 max 150 max
42.35
A
150 max 150 max
P
D
C118
43
< Screw: M5 or M6 >
Model F3W-MA0100P F3W-MA0300P
Dimension A 208 478
Dimension C1 190 430
Dimension D 140 410
Dimension P 20 20
Number of Standard
Fixed Brackets 22
15
F3W-MA
Standard Fixed Bracket(F39-LGF)
Accessories
Single-Ended Cable for Emitter (F39-JGA-L, sold separately)
Single-Ended Cable for Receiver (F39-JGA-D, sold separately)
Emitter cable (Gray) Receiver cable (Black) L (m)
F39-JG3A-L F39-JG3A-D 3
F39-JG7A-L F39-JG7A-D 7
F39-JG10A-L F39-JG10A-D 10
F39-JG15A-L F39-JG15A-D 15
F39-JG20A-L F39-JG20A-D 20
51
8
(23.1)
(25.8)
9.2
66
6.4
32.1
36
Material: ZDC2
40.7
L
Insulated vinyl round cable dia. 6.6, 5-wire
(Cross section of conductor: 0.38 mm2/insulator diameter: dia. 1.2 mm)
dia.14.9
M12 IP67 connector
Insulated vinyl round cable dia. 6.6, 8-wire
(Cross section of conductor: 0.38 mm2/insulator diameter: dia. 1.2 mm)
dia.14.9
M12 IP67 connector
L
40.7
16
F3W-MA
Double-ended Cable for Emitter: Cable for extension (F39-JGB-L, sold separately)
Related Manuals
Emitter cable (Gray) Receiver cable (Black) L (m)
F39-JGR5B-L F39-JGR15B-D 0.5
F39-JG1B-L F39-JG1B-D 1
F39-JG3B-L F39-JG3B-D 3
F39-JG5B-L F39-JG5B-D 5
F39-JG7B-L F39-JG7B-D 7
F39-JG10B-L F39-JG10B-D 10
F39-JG15B-L F39-JG15B-D 15
F39-JG20B-L F39-JG20B-D 20
ManNo. Model Manual name
Z355 F3W-MA Smart Muting Actuator F3W-MA Series User's Manual
M12 IP67 connector Insulated vinyl round cable dia. 6.6, 5-wire (2-pair + 1)
(Cross section of conductor: 0.38 mm2/insulator diameter: dia. 1.2 mm)
M12 IP67 connector
40.7
L
44.7
dia.14.9
dia.14.9
17
Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all quotes, agreements, purchase orders, acknowledgments, price lists,
catalogs, manuals, brochures and other documents, whether electronic or in
writing, relating to the sale of products or services (collectively, the "Products")
by Omron Electronics LLC and its subsidiary companies (“Omron”). Omron
objects to any terms or conditions proposed in Buyer’s purchase order or other
documents which are inconsistent with, or in addition to, these Terms.
2. Prices; Payment Terms. All prices stated are current, subject to change with-
out notice by Omron. Omron reserves the right to increase or decrease prices
on any unshipped portions of outstanding orders. Payments for Products are
due net 30 days unless otherwise stated in the invoice.
3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices
sent to Buyer after deducting transportation charges, taxes and duties, and will
be allowed only if (i) the invoice is paid according to Omron’s payment terms
and (ii) Buyer has no past due amounts.
4. Interest. Omron, at its option, may charge Buyer 1-1/2% interest per month or
the maximum legal rate, whichever is less, on any balance not paid within the
stated terms.
5. Orders. Omron will accept no order less than $200 net billing.
6. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Products.
7. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Omron or required to be collected directly or
indirectly by Omron for the manufacture, production, sale, delivery, importa-
tion, consumption or use of the Products sold hereunder (including customs
duties and sales, excise, use, turnover and license taxes) shall be charged to
and remitted by Buyer to Omron.
8. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Omron, Omron reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Omron may (without liabil-
ity and in addition to other remedies) cancel any unshipped portion of Prod-
ucts sold hereunder and stop any Products in transit until Buyer pays all
amounts, including amounts payable hereunder, whether or not then due,
which are owing to it by Buyer. Buyer shall in any event remain liable for all
unpaid accounts.
9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Omron against all related costs or expenses.
10. Force Majeure. Omron shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
11. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron:
a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship
except in “break down” situations.
b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall
constitute delivery to Buyer;
c. All sales and shipments of Products shall be FOB shipping point (unless oth-
erwise stated in writing by Omron), at which point title and risk of loss shall
pass from Omron to Buyer; provided that Omron shall retain a security inter-
est in the Products until the full purchase price is paid;
d. Delivery and shipping dates are estimates only; and
e. Omron will package Products as it deems proper for protection against nor-
mal handling and extra charges apply to special conditions.
12. Claims. Any claim by Buyer against Omron for shortage or damage to the
Products occurring before delivery to the carrier must be presented in writing
to Omron within 30 days of receipt of shipment and include the original trans-
portation bill signed by the carrier noting that the carrier received the Products
from Omron in the condition claimed.
13. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the
Products will be free from defects in materials and workmanship for a period of
twelve months from the date of sale by Omron (or such other period expressed
in writing by Omron). Omron disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR
INTENDED USE. Omron further disclaims all warranties and responsibility of
any type for claims or expenses based on infringement by the Products or oth-
erwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obli-
gation hereunder shall be, at Omron’s election, to (i) replace (in the form
originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying
Product, or (iii) repay or credit Buyer an amount equal to the purchase price of
the non-complying Product; provided that in no event shall Omron be responsi-
ble for warranty, repair, indemnity or any other claims or expenses regarding
the Products unless Omron’s analysis confirms that the Products were prop-
erly handled, stored, installed and maintained and not subject to contamina-
tion, abuse, misuse or inappropriate modification. Return of any Products by
Buyer must be approved in writing by Omron before shipment. Omron Compa-
nies shall not be liable for the suitability or unsuitability or the results from the
use of Products in combination with any electrical or electronic components,
circuits, system assemblies or any other materials or substances or environ-
ments. Any advice, recommendations or information given orally or in writing,
are not to be construed as an amendment or addition to the above warranty.
See http://www.omron247.com or contact your Omron representative for pub-
lished information.
14. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE
FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY
WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS
BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual
price of the Product on which liability is asserted.
15. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and
their employees from and against all liabilities, losses, claims, costs and
expenses (including attorney's fees and expenses) related to any claim, inves-
tigation, litigation or proceeding (whether or not Omron is a party) which arises
or is alleged to arise from Buyer's acts or omissions under these Terms or in
any way with respect to the Products. Without limiting the foregoing, Buyer (at
its own expense) shall indemnify and hold harmless Omron and defend or set-
tle any action brought against such Companies to the extent based on a claim
that any Product made to Buyer specifications infringed intellectual property
rights of another party.
16. Property; Confidentiality. Any intellectual property in the Products is the exclu-
sive property of Omron Companies and Buyer shall not attempt to duplicate it
in any way without the written permission of Omron. Notwithstanding any
charges to Buyer for engineering or tooling, all engineering and tooling shall
remain the exclusive property of Omron. All information and materials supplied
by Omron to Buyer relating to the Products are confidential and proprietary,
and Buyer shall limit distribution thereof to its trusted employees and strictly
prevent disclosure to any third party.
17. Export Controls. Buyer shall comply with all applicable laws, regulations and
licenses regarding (i) export of products or information; (iii) sale of products to
“forbidden” or other proscribed persons; and (ii) disclosure to non-citizens of
regulated technology or information.
18. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right
and no course of dealing between Buyer and Omron shall operate as a waiver
of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder
without Omron's written consent. (c) Law. These Terms are governed by the
law of the jurisdiction of the home office of the Omron company from which
Buyer is purchasing the Products (without regard to conflict of law princi-
ples). (d) Amendment. These Terms constitute the entire agreement between
Buyer and Omron relating to the Products, and no provision may be changed
or waived unless in writing signed by the parties. (e) Severability
. If any provi-
sion hereof is rendered ineffective or invalid, such provision shall not invalidate
any other provision. (f) Setoff. Buyer shall have no right to set off any amounts
against the amount owing in respect of this invoice. (g) Definitions. As used
herein, “including” means “including without limitation”; and “Omron Compa-
nies” (or similar words) mean Omron Corporation and any direct or indirect
subsidiary or affiliate thereof.
Certain Precautions on Specifications and Use
1. Suitability of Use. Omron Companies shall not be responsible for conformity
with any standards, codes or regulations which apply to the combination of the
Product in the Buyer’s application or use of the Product. At Buyer’s request,
Omron will provide applicable third party certification documents identifying
ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Prod-
uct in combination with the end product, machine, system, or other application
or use. Buyer shall be solely responsible for determining appropriateness of
the particular Product with respect to Buyer’s application, product or system.
Buyer shall take application responsibility in all cases but the following is a
non-exhaustive list of applications for which particular attention must be given:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Use in consumer products or any use in significant quantities.
(iii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety equip-
ment, and installations subject to separate industry or government regulations.
(iv) Systems, machines and equipment that could present a risk to life or prop-
erty. Please know and observe all prohibitions of use applicable to this Prod-
uct.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO
ADDRESS THE RISKS, AND THAT THE OMRON’S PRODUCT IS PROP-
ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Omron Companies shall not be responsible for the
user’s programming of a programmable Product, or any consequence thereof.
3. Performance Data. Data presented in Omron Company websites, catalogs
and other materials is provided as a guide for the user in determining suitabil-
ity and does not constitute a warranty. It may represent the result of Omron’s
test conditions, and the user must correlate it to actual application require-
ments. Actual performance is subject to the Omron’s Warranty and Limitations
of Liability.
4. Change in Specifications. Product specifications and accessories may be
changed at any time based on improvements and other reasons. It is our prac-
tice to change part numbers when published ratings or features are changed,
or when significant construction changes are made. However, some specifica-
tions of the Product may be changed without any notice. When in doubt, spe-
cial part numbers may be assigned to fix or establish key specifications for
your application. Please consult with your Omron’s representative at any time
to confirm actual specifications of purchased Product.
5. Errors and Omissions. Information presented by Omron Companies has been
checked and is believed to be accurate; however, no responsibility is assumed
for clerical, typographical or proofreading errors or omissions.
OMRON CANADA, INC. • HEAD OFFICE
Toronto, ON, Canada • 416.286.6465 • 866.986.6766 • www.omron247.com
OMRON ELECTRONICS DE MEXICO • HEAD OFFICE
México DF • 52.
55.59.01.43.00
• 01-800-226-6766 • mela@omron.com
OMRON ELECTRONICS DE MEXICO • SALES OFFICE
Apodaca, N.L. • 52.81.11.56.99.20 • 01-800-226-6766 • mela@omron.com
OMRON ELETRÔNICA DO BRASIL LTDA • HEAD OFFICE
São Paulo, SP, Brasil • 55.11.2101.6300 • www.omron.com.br
OMRON ARGENTINA • SALES OFFICE
Cono Sur • 54.11.4783.5300
OMRON CHILE • SALES OFFICE
Santiago • 56.9.9917.3920
OTHER OMRON LATIN AMERICA SALES
54.11.4783.5300
Authorized Distributor:
F98I-E-01 03/15 Note: Specifications are subject to change. © 2015 Omron Electronics LLC Printed in U.S.A.
Printed on recycled paper.
Automation Control Systems
• Machine Automation Controllers (MAC) • Programmable Controllers (PLC)
• Operator interfaces (HMI) • Distributed I/O • Software
Drives & Motion Controls
• Servo & AC Drives • Motion Controllers & Encoders
Temperature & Process Controllers
• Single and Multi-loop Controllers
Sensors & Vision
• Proximity Sensors • Photoelectric Sensors • Fiber-Optic Sensors
• Amplified Photomicrosensors • Measurement Sensors
• Ultrasonic Sensors • Vision Sensors
Industrial Components
• RFID/Code Readers • Relays • Pushbuttons & Indicators
• Limit and Basic Switches • Timers • Counters • Metering Devices
• Power Supplies
Safety
• Laser Scanners • Safety Mats • Edges and Bumpers • Programmable Safety
Controllers • Light Curtains • Safety Relays • Safety Interlock Switches
OMRON AUTOMATION AND SAFETY • THE AMERICAS HEADQUARTERS • Chicago, IL USA • 847.843.7900 • 800.556.6766 • www.omron247.com
OMRON EUROPE B.V. •
Wegalaan 67-69, NL-2132 JD, Hoofddorp, The Netherlands.
•
+31 (0) 23 568 13 00
•
www.industrial.omron.eu