VKP60xTC
60 Watt Triple Output
Half Brick DC/DC Converter
Technical inquiries - email: sales@murata-ps.com, tel: 508 339 3000
www.murata-ps.com
The VKP60LTC and VKP60MTC Series are
members of the VK high density DC/DC converter
family. They are multiple output DC/DC convert-
ers offered in both a 18-40 and 33-75 input
voltage range. Their versatile architecture featur-
ing fully isolated channels enables the system
designer to utilize the converter in either a single,
dual or triple output scheme without excessive
minimum load requirements or cross regulation
degradation.
The VKP60xTC’s architecture results in an
economical and practical solution for use in dis-
tributed power schemes for today’s demanding
telecommunication and electronic data process-
ing applications requiring ground separation
between noise sensitive digital logic and bipolar
analog components. The VKP60xTC’s proprietary
control circuity responds to 50-100% load steps
in 35μSeconds to within 1% of nominal Vout.
The peak deviation will not exceed 7% of Vout
for pulsed load slew rates in excess of 75 Amps
per microsecond. The VKP60xTC is ideal for
electronic data processing applications utilizing
modern disk drives and low voltage micro-
processors that require dynamic load current
response while maintaining tight output voltage
tolerances.
ISO9001
CERTIFIED
For full details go to
www.murata-ps.com/rohs
PRODUCT SELECTION CHART
VKP60LT312C 24 (18-40) 3.3 12 12 18 2.5 2.5
VKP60LT315C 24 (18-40) 3.3 15 15 18 2.0 2.0
VKP60LT512C 24 (18-40) 5.1 12 12 12 2.5 2.5
VKP60LT515C 24 (18-40) 5.0 15 15 12 2.0 2.0
VKP60MT312C 48 (33-75) 3.3 12 12 18 2.5 2.5
VKP60MT315C 48 (33-75) 3.3 15 15 18 2.0 2.0
VKP60MT512C 48 (33-75) 5.1 12 12 12 2.5 2.5
VKP60MT515C 48 (33-75) 5.0 15 15 12 2.0 2.0
V1 (±) V2 (±) V3 (±) V1(±) V2(±) V3(±)
MODEL
INPUT
VOLTAGE
(VDC)
RATED VOUT (VDC) RATED MAXIMUM IOUT (A)
z RoHS Compliant
z 18 - 40 & 33 - 75V Input Range
z Each Channel Independently Current
Limited
z High Effi ciency: 87% Typical
z Excellent Cross Regulation
z 1500VDC Isolation Between Input
and Output
z 500 VDC Channel to Channel Isolation
z Fixed Frequency Operation
z Operation to 100°C Baseplate
Temperature
z 50μS Transient Recovery,
0-90% Load Step
z Primary & Secondary Remote On/Off
z Adjustable Output Voltage
z External Synchronization
z VKP60MT Series UL/cUL approved
to UL1950 and VDE approved to
EN60950-1
email: sales@murata-ps.com
04 May 2011 TDC_VKP60xTC.B02 Page 1 of 7
VKP60xTC
60 Watt Triple Output
Half Brick DC/DC Converter
H
H
TARGETED FOR
OBSOLESCENCE
TARGETED FOR OBSOLESCENCE
TARGETED FOR OBSOLESCENCE
TARGETED FOR OBSOLESCENCE
TARGETED FOR OBSOLESCENCE
OBSOLETE
OBSOLETE
OBSOLETE
OBSOLETE
SPECIFICATIONS, ALL MODELS
Specifi cations are at TCASE = +40°C nominal input voltage unless otherwise specifi ed.
* See Application Notes available on the web at www.murata-ps.com
** X = Either L (24) or M (48)
PARAMETER CONDITIONS MIN TYP MAX UNITS
Voltage Range
VKP60LTXXC Series
VKP60MTXXC Series
16
33
24
48
40
75
VDC
VDC
Refl ected Ripple Current Peak - Peak 220 mA
Input Ripple Current DC to 1KHz 50 60 dB
Maximum Input Current
VKP60LTXXC Series
VKP60MTXXC Series
Output Power = 60 W
VIN = 16V
VIN = 30V
6
3
A
A
No Load Power Dissipation POUT = 0, VIN MIN < VIN < VIN MAX 6W
Inrush Charge
VKP60LTXXC Series
VKP60MTXXC Series
0.29
0.165
mC
mC
Quiescent Operating Current
Primary On/Off Disabled
Seconary On/Off Disabled
7.5
15
10
25
mA
mA
INPUT
PARAMETER CONDITIONS MIN TYP MAX UNITS
ISOLATION
Input to Output Peak Test 1500 VDC
Input to Baseplate 1500 VDC
Channel to Channel Any Channel to Channel 500 VDC
Resistance, Input to Output 10 MΩ
Capacitance, Input to Output 2000 pF
Leakage Current 180 oA, rms
GENERAL
Set-point Accuracy 1%
Turn-on Time 3.5 5 mSec
Remote On/Off Control Inputs
Primary
Sink Current Logic Low
Vlow
Vhigh
Open Collector/Drain
VIN = VIN MAX 24
48
7
0.8
Open Collector
mA
V
Secondary
Sink Current Logic Low
Vlow
Vhigh
Open Collector/Drain
100
0.4
Open Collector
μA
V
External Synchronization Input
Frequency
Pulse Width
Source Impedance
Input High Voltage
Input Low Voltage
Input Impedance
440
150
4
0
470
520
320
47
5
1
KHz
nSec
Ω
V
V
Ω
Switching Frequency 470 480 490 KHz
Weight 3 (85) oz (g)
GENERAL
email: sales@murata-ps.com
04 May 2011 TDC_VKP60xTC.B02 Page 2 of 7
VKP60xTC
60 Watt Triple Output
Half Brick DC/DC Converter
www.murata-ps.com
VKP60xT312C** OUTPUT
See Regulation Curves See Regulation Curves
V1 V2 V3 UNITS
PARAMETER CONDITIONS Min Nom Max Min Nom Max Min Nom Max
Output Power Total Combined O/P Power =
60 Watts Max. 30 60 15 30 15 30 W
Set Point Voltage IO Nom 3.3 12.2 12.2 V
Output Current, IOUT 0.5 9 18 0 1.25 2.5 0 1.25 2.5 A
Output Ripple, p-p DC to 20MHz* 100 200 150 250 150 250 mV
Output Adjust Range * 3.15 3.80 Dependent on V1 V
Output Temperature Drift .02 .05 .02 .05 .02 .05 %/°C
Line Regulation VIN, Min<VIN >VIN, Max
I
O = IO, Nom 0.05 1.0 1.0 2.0 1.0 2.0 %
Load Regulation Min Load to Rated Load 0.50 1.0 %
Current Limit Inception Other Outputs Min Load 23 5.0 5.0 A
Short-Circuit Current 19 25 4.0 5.0 4.0 5.0 A
Transient Response 50 to 100% Load Step
Peak Deviation 150 250 mV
Settling Time VOUT, 1% of VOUT, Nom 35 50 μSec
Overvoltage Limit 4.2 5.0 V
Effi ciency IOUT1=9A, (IOUT2+IOUT3)=2.5A 85 86 %
F.L. VIN=Nominal
VKP60xT315** OUTPUT
See Regulation Curves See Regulation Curves
V1 V2 V3 UNITS
PARAMETER CONDITIONS Min Nom Max Min Nom Max Min Nom Max
Output Power Total Combined O/P Power =
60 Watts Max. 30 60 15 30 15 30 W
Set Point Voltage IO Nom 3.3 15.85 15.85 V
Output Current, IOUT 0.5 9 18 0 1 2 0 1 2 A
Output Ripple, p-p DC to 20MHz* 100 200 125 250 125 250 mV
Output Adjust Range See Application Notes* 3.15 3.80 Dependent on V1 V
Output Temperature Drift .02 .05 .02 .05 .02 .05 %/°C
Line Regulation VIN, Min<VIN>VIN, Max
I
O = IO, Nom 0.05 1.0 1.0 2.0 1.0 2.0 %
Load Regulation Min Load to Rated Load 0.50 1.0 %
Current Limit Inception Other Outputs Min Load 23 4.0 4.0 A
Short-Circuit Current 19 25 3.2 4.0 3.2 4.0 A
Transient Response 50 to 100% Load Step
Peak Deviation 150 250 mV
Settling Time VOUT, 1% of VOUT, Nom 35 50 μSec
Overvoltage Limit 4.2 5.0 V
Effi ciency IOUT1=9A, (IOUT2+IOUT3)=2A 85 86 %
F.L. VIN=Nominal
* See Application Notes available on the web at www.murata-ps.com
** X = Either L (24) or M (48)
SPECIFICATIONS, ALL MODELS
Specifi cations are at TCASE = +40°C nominal input voltage unless otherwise specifi ed.
PARAMETER CONDITIONS MIN TYP MAX UNITS
TEMPERATURE
Operation/Specifi cation
Case temperature
-40 +100 ˚C
Storage -50 +125 ˚C
Shutdown +100 +115 ˚C
Thermal Impedance Case to Ambient 8.2 ˚C/W
GENERAL
continued
email: sales@murata-ps.com
04 May 2011 TDC_VKP60xTC.B02 Page 3 of 7
VKP60xTC
60 Watt Triple Output
Half Brick DC/DC Converter
www.murata-ps.com
See Regulation Curves See Regulation Curves
VKP60xT515** OUTPUT
V1 V2 V3 UNITS
PARAMETER CONDITIONS Min Nom Max Min Nom Max Min Nom Max
Output Power Total Combined O/P Power =
60 Watts Max 30 60 15 30 15 30 W
Set Point Voltage IO Nom 5.0 15.3 15.3 V
Output Current, IOUT 0.5 6 12 0 1 2 0 1 2 A
Output Ripple, p-p DC to 20MHz* 100 200 125 250 125 250 mV
Output Adjust Range * 4.60 5.50 Dependent on V1 V
Output Temperature Drift .02 .05 .02 .05 .02 .05 %/°C
Line Regulation VIN, Min<VIN >VIN, Max
I
O = IO, Nom 0.05 0.10 1.0 2.0 1.0 2.0 %
Load Regulation Min Load to Rated Load 0.50 1.0 %
Current Limit Inception Other Outputs Min Load 16 4.0 4.0 A
Short-Circuit Current 12.6 16 3.2 4.0 3.2 4.0 A
Transient Response 50 to 100% Load Step
Peak Deviation 200 300 mV
Settling Time VOUT, 1% of VOUT, Nom 35 50 μSec
Overvoltage Limit 6.0 6.8 V
Effi ciency IOUT1=6A, (IOUT2+IOUT3)=2A 86 87 %
F.L. VIN=Nominal
See Regulation Curves See Regulation Curves
VKP60xT512** OUTPUT
V1 V2 V3 UNITS
PARAMETER CONDITIONS Min Nom Max Min Nom Max Min Nom Max
Output Power Total Combind O/P Power =
60 Watts Max 30 60 15 30 15 30 W
Set Point Voltage IO Nom 5.1 12 12 V
Output Current, IOUT 0.5 6.0 12 0 1.25 2.5 0 1.25 2.5 A
Output Ripple, p-p DC to 20MHz* 125 200 150 250 150 250 mV
Output Adjust Range * 4.75 5.50 Dependent on V1 V
Output Temperature Drift .02 .05 .02 .05 .02 .05 %/°C
Line Regulation VIN, Min<VIN >VIN, Max
I
O = IO, Nom 0.05 0.10 1.0 2.0 1.0 2.0 %
Load Regulation Min Load to Rated Load 0.50 1.0 %
Current Limit Inception Other Outputs Min Load 16 5.0 5.0 A
Short-Circuit Current 12.6 16 4.0 5.0 4.0 5.0 A
Transient Response 50 to 100% Load Step
Peak Deviation 200 300 mV
Settling Time VOUT, 1% of VOUT, Nom 35 50 μSec
Overvoltage Limit 6.0 6.8 V
Effi ciency IOUT1=6A, (IOUT2+IOUT3)=2.5A 86 87 %
F.L. VIN=Nomina
SPECIFICATIONS, ALL MODELS
Specifi cations are at TCASE = +40°C nominal input voltage unless otherwise specifi ed.
Device Family
Indicates 100 Watt Regulated Unit
Model Number
Selected from Table of Electrical Characteristics
Where:
x = Input Voltage (L = 24VDC, M = 48VDC)
T = Number of Outputs (Triple ‘T’)
y = 3 for 3.3V, 5 for 5V
z = 12 for 12V, 15 for 15V
Lead Length
0.250" - No Number
0.145" - (6)
0.110" - (8)
RoHS Compliant
ORDERING INFORMATION
VKp60 xTyz- L C
* See Application Notes available on the web at www.murata-ps.com
** X = Either L (24) or M (48)
email: sales@murata-ps.com
04 May 2011 TDC_VKP60xTC.B02 Page 4 of 7
VKP60xTC
60 Watt Triple Output
Half Brick DC/DC Converter
www.murata-ps.com
Output Short-Circuit
Duration Continuous
Baseplate Temperature +100°C
Lead Temperature
(soldering, 10 seconds max) +300°C
Storage Temperature +125°C
Input to Output Isolation 1500 VDC
ABSOLUTE MAX. RATINGS
EFFICIENCY vs TEMPERATURE
Change in Effi ciency (%)
Case Temperature (°C)
TCASE = +40°C, nominal input voltage, nominal load, recommended external
components applied, unless otherwise specifi ed.*
Specifi cations are at TCASE = +40°C nominal input voltage, nominal load, recommended external components applied, unless otherwise specifi ed.
(Refer to Application Note DCAN-9 at www.murata-ps.com)
TYPICAL PERFORMANCE CURVES
email: sales@murata-ps.com
04 May 2011 TDC_VKP60xTC.B02 Page 5 of 7
VKP60xTC
60 Watt Triple Output
Half Brick DC/DC Converter
www.murata-ps.com
TYPICAL PERFORMANCE CURVES
VKP60xT512
VKP60xT515
VKP60xT312
VKP60xT315
email: sales@murata-ps.com
04 May 2011 TDC_VKP60xTC.B02 Page 6 of 7
VKP60xTC
60 Watt Triple Output
Half Brick DC/DC Converter
www.murata-ps.com
MECHANICAL
PIN SIDE UP
PIN SIDE
DOWN
SIDE
VIEW
1 PRIMARY ON/OFF
2 -VIN
3 +VIN
4 SYNC IN
5 -V2
6 +V2
7 TRIM
8 +V1
9 -V1
10 SECONDARY ON/OFF
11 +V3
12 -V3
PIN CONNECTIONS
NOTES:
All dimensions are in inches (millimeters).
PIN PLACEMENT TOLERANCE: ± 0.005”
MECHANICAL TOLERANCE: ± 0.015”
Marked with: specifi c model ordered, date code, job code.
MATERIAL: Units are encapsulated in a low thermal resistance molding
compound which has excellent chemical resistance, wide operating
temperature range, and good electrical properties under high humidity
environments. The encapsulant and outer shell of the unit have
UL94V-0 ratings. Lead material is matte tin 100 microinches min., over
nickel, 40-80 microinches.
[A] See Ordering Information on page 4 for available lead lengths.
email: sales@murata-ps.com
04 May 2011 TDC_VKP60xTC.B02 Page 7 of 7
VKP60xTC
60 Watt Triple Output
Half Brick DC/DC Converter
Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other
technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply
the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifi cations are subject to change without
notice. © 2011 Murata Power Solutions, Inc.
Murata Power Solutions, Inc.
11 Cabot Boulevard, Mansfi eld, MA 02048-1151 U.S.A.
ISO 9001 and 14001 REGISTERED
www.murata-ps.com/locations
