AA3528SF4S-R 3.5 x 2.8 mm Infrared Emitting Diode DESCRIPTION z PACKAGE DIMENSIONS SF4 Made with Gallium Aluminum Arsenide Infrared Emitting diodes. FEATURES z z z z Mechanically and spectrally matched to the phototransistor Package: 2000 pcs / reel Moisture sensitivity level: 3 RoHS compliant APPLICATIONS z z z z z z Infrared Illumination for cameras Machine vision systems Surveillance systems Industrial electronics IR data transmission Remote control RECOMMENDED SOLDERING PATTERN (units : mm; tolerance : 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number AA3528SF4S-R Emitting Color (Material) Lens Type Infrared (GaAlAs) Water Clear Po (mW/sr) @ 20mA [2] Viewing Angle [1] Min. Typ. 21/2 1.2 2 120 Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Radiant Intensity / luminous flux: +/-15%. 3. Radiant intensity value is traceable to CIE127-2007 standards. (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAL0870 / 1201007050 Rev No: V.5B Date: 09/06/2017 Page 1 / 4 AA3528SF4S-R ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25C Parameter Symbol Emitting Color Wavelength at Peak Emission IF = 20mA peak Spectral Bandwidth at 50% REL MAX IF = 20mA Capacitance Value Unit Typ. Max. Infrared 880 - nm Infrared 50 - nm C Infrared 90 - pF Forward Voltage IF = 20mA VF [1] Infrared 1.3 1.6 V Reverse Current (VR = 5V) IR Infrared - 10 uA Temperature Coefficient of Wavelength IF = 20mA, -10C T 85C TC Infrared 0.3 - nm/C Temperature Coefficient of VF IF = 20mA, -10C T 85C TCV Infrared -1.3 - mV/C Notes: 1. Forward voltage: 0.1V. 2. Wavelength value is traceable to CIE127-2007 standards. 3. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at TA=25C Parameter Symbol Value Unit Power Dissipation PD 85 mW Reverse Voltage VR 5 V Junction Temperature Tj 125 C Operating Temperature Top -40 to +85 C Storage Temperature Tstg -40 to +85 C DC Forward Current IF 50 mA 1200 mA 8000 V 205 C/W 90 C/W Peak Forward Current Electrostatic Discharge Threshold (HBM) IFM [1] [2] Thermal Resistance (Junction / Ambient) Rth JA Thermal Resistance (Junction / Solder point) Rth JS [2] Notes: 1. 1/100 Duty Cycle, 10s Pulse Width. 2. Rt h JA ,Rt h JS Results from mounting on PC board FR4 (pad size 16 mm 2 per pad). 3. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity - Ref JEDEC/JESD625-A and JEDEC/J-STD-033. (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAL0870 / 1201007050 Rev No: V.5B Date: 09/06/2017 Page 2 / 4 AA3528SF4S-R TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH SF4 Relative Intensity (a. u.) 100% Ta = 25 C Ta = 25 C 80% 0 -15 15 30 -30 45 -45 60% 60 -60 40% 20% 75 -75 0% 600 650 700 750 800 850 Wavelength (nm) 900 950 1000 1050 -90 1.0 0.5 0.0 90 1.0 0.5 INFRARED Forward current (mA) Ta = 25 C 40 30 20 10 Permissible forward current (mA) 2.5 Radiant intensity normalised at 20 mA 50 0 0.8 Forward Current Derating Curve Radiant Intensity vs. Forward Current Ta = 25 C 2.0 1.5 1.0 0.5 0.0 1.0 1.2 1.4 1.6 Forward voltage (V) 1.8 0 10 20 30 40 Forward current (mA) 50 REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS Radiant Intensity vs. Ambient Temperature 2.5 70 Radiant intensity normalised at Ta = 25 C Forward Current vs. Forward Voltage 60 50 40 30 20 10 2.0 1.5 1.0 0.5 0.0 0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) -40 -20 0 20 40 60 80 100 Ambient temperature (C) TAPE SPECIFICATIONS (units : mm) REEL DIMENSION (units : mm) Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAL0870 / 1201007050 Rev No: V.5B Date: 09/06/2017 Page 3 / 4 AA3528SF4S-R PACKING & LABEL SPECIFICATIONS HANDLING PRECAUTIONS Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might lead to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or 2. Do not directly touch or handle the silicone lens 3. Do not stack together assembled surface. It may damage the internal circuitry. appropriate tools. PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry. 4-1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. 4-2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup. 4-3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup and avoid damage during production. 5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of lead frame. Special care should be taken if an LED with silicone encapsulation is to be used near such substances. PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues. 4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance. 5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright. 6. All design applications should refer to Kingbright application notes available at http://www.KingbrightUSA.com/ApplicationNotes (c) 2017 Kingbright. All Rights Reserved. Spec No: DSAL0870 / 1201007050 Rev No: V.5B Date: 09/06/2017 Page 4 / 4 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Kingbright: AA3528SF4S-R AA3528SF4S