2SK2570 Silicon N Channel MOS FET Low Frequency Power Switching REJ03G1019-0200 (Previous: ADE-208-574) Rev.2.00 Sep 07, 2005 Features * Low on-resistance RDS(on) = 0.8 typ. (VGS = 4 V, ID = 100 mA) * 2.5 V gate drive devices. * Small package (MPAK) Outline RENESAS Package code: PLSP0003ZB-A (Package name: MPAK) D 3 1 G 1. Source 2. Gate 3. Drain 2 S Note: Marking is "ZL-" Rev.2.00 Sep 07, 2005 page 1 of 6 2SK2570 Absolute Maximum Ratings (Ta = 25C) Item Drain to source voltage Gate to source voltage Drain current Drain peak current Channel dissipation Channel temperature Storage temperature Note: 1. PW 10 s, duty cycle 1 % Symbol VDSS VGSS ID ID(pulse)*1 Pch Tch Tstg Ratings 20 10 0.2 0.4 150 150 -55 to +150 Unit V V A A mW C C Electrical Characteristics (Ta = 25C) Item Drain to source breakdown voltage Gate to source breakdown voltage Symbol V(BR)DSS V(BR)GSS Min 20 10 Typ -- -- Max -- -- Unit V V IDSS IGSS -- -- -- -- 1.0 5.0 A A VDS = 20 V, VGS = 0 VGS = 6.5 V, VDS = 0 Gate to source cutoff voltage VGS(off) Static drain to source on state resistance RDS(on) Forward transfer admittance Input capacitance Output capacitance Reverse transfer capacitance Turn-on delay time Rise time Turn-off delay time Fall time Notes: 2. Pulse test |yfs| Ciss Coss Crss td(on) tr td(off) tf 0.5 -- -- 0.22 -- -- -- -- -- -- -- -- 0.8 1.3 0.35 45 33 9.6 20 60 240 140 1.5 1.1 2.2 -- -- -- -- -- -- -- -- V S pF pF pF ns ns ns ns ID = 10 A, VDS = 5 V ID = 100 mA, VGS = 4 V *2 ID = 40 mA, VGS = 2.5 V *2 ID = 100 mA, VDS = 10 V *2 Zero gate voltage drain current Gate to source leak current Rev.2.00 Sep 07, 2005 page 2 of 6 Test Conditions ID = 10 A, VGS = 0 IG = 100 A, VDS = 0 VDS = 10 V, VGS = 0, f = 1 MHz VGS = 5 V, ID = 100 mA, RL = 100 2SK2570 Main Characteristics Maximum Safe Operation Area 200 5 2 Drain Current ID (A) Channel Dissipation Pch (mW) Maximum Channel Dissipation Curve 150 100 50 0 50 100 150 Ambient Temperature 200 Typical Output Characteristics Typical Transfer Characteristics 0.20 2V 10 V 5V 2.5 V 0.12 1.8 V 0.08 VGS = 1.6 V 0.04 0.16 75C 4 6 8 0.08 0.04 Pulse Test 0.4 0.3 0.2 ID = 0.2 A 0.1 0 0.1 A 0.05 A 2 4 6 8 10 Gate to Source Voltage VGS (V) Rev.2.00 Sep 07, 2005 page 3 of 6 0 10 Drain to Source Saturation Voltage vs. Gate to Source Voltage 0.5 Tc = -25C VDS = 10 V Pulse Test Static Drain to Source on State Resistance RDS (on) () Drain to Source Saturation Voltage VDS (on) (V) 2 25C 0.12 Pulse Test 0 50 100 Drain to Source Voltage VDS (V) Drain Current ID (A) Drain Current ID (A) 1 ms PW 0.2 (1 10 m = DC sh s ot 0.1 O ) pe Operation in ra t io 0.05 this area is n limited by RDS(on) 0.02 Ta = 25C 0.01 1 shot 0.05 0.2 0.5 1 2 5 10 20 0.5 Ta (C) 0.20 0.16 1 0.5 1.0 1.5 2.0 2.5 Static Drain to Source on State Resistance vs. Drain Current 5 Pulse Test 2 VGS = 2.5 V 1 4V 0.5 0.2 0.1 0.01 0.02 0.05 0.1 0.2 Drain Current ID (A) 0.5 Static Drain to Source on State Resistance vs. Temperature Forward Transfer Admittance vs. Drain Current 2.5 ID = 0.2 A 2.0 1.5 0.05, 0.1A VGS = 2.5 V 1.0 0.05, 0.1, 0.2 A 4V 0.5 Pulse Test 0 40 0 40 80 120 160 Forward Transfer Admittance yfs (S) Static Drain to Source on State Resistance RDS (on) () 2SK2570 0.2 Tc = -25C 0.1 25C 0.05 75C 0.02 0.01 VDS = 10 V Pulse Test 0.005 0.002 0.005 0.01 0.02 0.05 0.1 Drain Current ID (A) Typical Capacitance vs. Drain to Source Voltage Switching Characteristics 0.2 500 td(off) Switching Time t (s) 200 Capacitance C (pF) 0.5 Case Temperature TC (C) 500 100 Ciss 50 20 Coss 10 Crss 5 VGS = 0 f = 1 MHz 2 1 0 4 8 12 16 20 Drain to Source Voltage VDS (V) Reverse Drain Current vs. Source to Drain Voltage 0.20 Reverse Drain Current IDR (A) 1 0.16 0.12 VGS = 0 5V 0.08 0.04 Pulse Test 0 0.4 0.8 1.2 Source to Drain Voltage Rev.2.00 Sep 07, 2005 page 4 of 6 1.6 2.0 VSD (V) 200 tf 100 tr 50 td(on) 20 10 5 0.05 VGS = 5 V, VDD = 10 V PW = 5 s, duty < 1 % 0.1 Drain Current 0.2 ID (A) 0.5 2SK2570 Switching Time Test Circuit Waveform 90% Vout Monitor Vin Monitor D.U.T. Vin 10% RL Vout Vin 5V 50 VDD = 10 V 10% 90% td(on) Rev.2.00 Sep 07, 2005 page 5 of 6 10% tr 90% td(off) tf 2SK2570 Package Dimensions JEITA Package Code RENESAS Code Package Name MPAK(T) / MPAK(T)V, MPAK / MPAKV PLSP0003ZB-A SC-59A D MASS[Typ.] 0.011g A Q e E HE L A c LP L1 Reference Symbol A3 A x M S b A e A2 A e1 A1 S b b1 c1 I1 c b2 A-A Section Pattern of terminal position areas A A1 A2 A3 b b1 c c1 D E e HE L L1 LP x b2 e1 I1 Q Dimension in Millimeters Min 1.0 0 1.0 0.35 0.1 2.7 1.35 2.2 0.35 0.15 0.25 Nom 1.1 0.25 0.42 0.4 0.13 0.11 1.5 0.95 2.8 Max 1.3 0.1 1.2 0.5 0.15 3.1 1.65 3.0 0.75 0.55 0.65 0.05 0.55 1.95 1.05 0.3 Ordering Information Part Name 2SK2570ZL-TL-E 2SK2570ZL-TR-E Quantity 3000 pcs 3000 pcs Shipping Container Taping Taping Note: For some grades, production may be terminated. Please contact the Renesas sales office to check the state of production before ordering the product. Rev.2.00 Sep 07, 2005 page 6 of 6 Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Keep safety first in your circuit designs! 1. Renesas Technology Corp. puts the maximum effort into making semiconductor products better and more reliable, but there is always the possibility that trouble may occur with them. Trouble with semiconductors may lead to personal injury, fire or property damage. Remember to give due consideration to safety when making your circuit designs, with appropriate measures such as (i) placement of substitutive, auxiliary circuits, (ii) use of nonflammable material or (iii) prevention against any malfunction or mishap. Notes regarding these materials 1. These materials are intended as a reference to assist our customers in the selection of the Renesas Technology Corp. product best suited to the customer's application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Renesas Technology Corp. or a third party. 2. Renesas Technology Corp. assumes no responsibility for any damage, or infringement of any third-party's rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. 3. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Renesas Technology Corp. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Renesas Technology Corp. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Renesas Technology Corp. by various means, including the Renesas Technology Corp. Semiconductor home page (http://www.renesas.com). 4. When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Renesas Technology Corp. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. 5. Renesas Technology Corp. semiconductors are not designed or manufactured for use in a device or system that is used under circumstances in which human life is potentially at stake. Please contact Renesas Technology Corp. or an authorized Renesas Technology Corp. product distributor when considering the use of a product contained herein for any specific purposes, such as apparatus or systems for transportation, vehicular, medical, aerospace, nuclear, or undersea repeater use. 6. The prior written approval of Renesas Technology Corp. is necessary to reprint or reproduce in whole or in part these materials. 7. If these products or technologies are subject to the Japanese export control restrictions, they must be exported under a license from the Japanese government and cannot be imported into a country other than the approved destination. Any diversion or reexport contrary to the export control laws and regulations of Japan and/or the country of destination is prohibited. 8. Please contact Renesas Technology Corp. for further details on these materials or the products contained therein. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, 1 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2730-6071 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 2713-2999 Renesas Technology (Shanghai) Co., Ltd. Unit2607 Ruijing Building, No.205 Maoming Road (S), Shanghai 200020, China Tel: <86> (21) 6472-1001, Fax: <86> (21) 6415-2952 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> 2-796-3115, Fax: <82> 2-796-2145 Renesas Technology Malaysia Sdn. Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jalan Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 (c) 2005. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .3.0