TAP600 Series 600 Watt Heat Sinkable Planar Resistors o0.159-0.169" (4.05-4.3mm) 2.331-2.394" (59.2-60.8mm) oM5 occ. Din 0.689-0.728" (17.5-18.5mm) 2.236-2.252" (56.8-57.2mm) 0.177-0.216" (4.5-5.5mm) 1.331-1.346" (33.8-34.2mm) 2.527-2.591" (64.2-65.8mm) 1.409-1.425" (35.8-36.2mm) II 0.295-0.335" (7.5-8.5mm) 0.177-0.216" (4.5-5.5mm) 1.240-1.279" (31.5-32.5mm) Ohmite's TAP600 delivers 600 watts of reliable power to a variety of power conditioning, power transmission, and power control applications. These resistors can be used designed for liquid, or air cooled heat sink systems used in variable speed drives, power supplies, robotics, motor control, and other control devices. Resistance values range from 0.5 to 100K in an easy to assemble package with a pre-calibrated mounting pressure to the cooling plate. The versatile TAP600 can be modified by request for dielectric strength up to 12KV, connector height up to 42mm, and terminal sleeves for insulation and creepage distances to 85mm. Contacts require the use of M5 screws. FEATURES 1.161-1.201" (29.5-30.5mm) 0.571-610" (14.5-15.5mm) * Dielectric Strengths Up to 12KV * Special Design for Low Inductive and Capacitance Values * Easy Termination to Contacts with M5 Screws * Calibrated Mounting Simplifies Assembly * Designed to Customer Specifications P E R F O R M A N C E D ATA Style 600 80 480 60 360 40 240 20 120 58 50 75 100 125 Case temperature, C 150 175 0 Peak Power (W), log scale 100 Resistance 1 Ohm = 1R0 10 Ohm = 10R 1000 Ohm = 1K0 10,000,000 1,000,000 100,000 10,000 1000 100 0.001 100,000 Energy (W), log scale Percent rated power 720 Rated power, watts 120 25 Tolerance J = 5% K = 10%, Std. L = 20% PULSE-FORMS E-function, time between two pulses: 1 sec. D E R AT I N G C U R V E 0 *This value is only valid by using a thermal conduction to the heat sink Rth -cs<0.025C/W. O R D E R I N G I N F O R M AT I O N S T O C K R E S I S TA N C E VA L U E S 1.0 15 500 2.0 30 1000 3.0 50 2500 4.0 75 3000 5.0 100 5000 10 300 10,000 0 Electrical Resistance Values: 0.5 to 100K Resistance Tolerance: 10% Std., 5% available on request. Temperature Coefficient: 150ppm/C (others upon request) Maximum Working Voltage: 5,000V DC, higher voltage on request, not exceeding max. power Power Rating: 600W at 70C heat sink temperature Electric Strength Voltage: Up to 12,000Vrms, 50Hz, 1 Min. Single Shot Voltage: Up to 12KV Normwave (1.5/50 sec) Insulation Resistance: 10G min. at 500V Creeping Distance: 42mm min. Air Distance: 14mm min. Inductance: 80nH Capacity/Mass: 110pF Capacity/Parallel: 40pF Operation Temperature: -55C to +150C Max. Torque for Contacts: 2 Nm Max. Torque for Mounting: 1.8 Nm Derating (thermal resist.): 8.73W/C (0.115C/W) Power Rating: 600W at 70C heat sink temp.* The value can be reached by using thermal transfer compound with a heat conductivity of 1w/mk. The flatness of the cooling plate must be better than 0.05mm overall. The roughness of the surface should not exceed 6.4m. Method Typical Results - R 1000 W/10 Sec. @ 70C 0.4% 56 Days/40C/ 95C 0.25% -55/+125/5 Cycles 0.20% 40g/4,000 Times 0.25% 2 - 500Hz/10g 0.25% Pn 30 min. ON/30 min. OFF 0.40% 200N 0.05% Test Short Time Overload Humidity Steady State Temp. Cycling Shock Vibrations Load Life 1,000 Cycles Terminal Strength of Contacts SPECIFICATIONS 0.01 0.1 1 10 Time ime (ms) 100 1,000 10,000 100,000 10,000 1,000 100 10 1 Ohmite Mfg. Co. 1600 Golf Rd., Suite 850, Rolling Meadows, IL 60008 * Tel. 1-866-9-OHMITE * Fax 1-847-574-7522 * www.ohmite.com * info@ohmite.com