048-5061-0H - PULSE ELECTRONICS

SPRING - LOADED

CONNECTORS

SPRING–LOADED CONNECTORS

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

Due to technical progress, all information provided is subject to change without prior notice.

QUICK SELECTOR CHART

SPRING-LOADED CONNECTORS AND PAD CONNECTORS

GRID 1.25 mm 2 mm 2.54 mm

SLC CONNECTORS SEE PAGE

Straight 32 34 34

solder tail

Right angle 32

solder tail

Surface mount 33 33 35, 36 35, 36

perpendicular

Surface mount 37 37

perpendicular

with positioning pins

Surface mount 38

parallel

SIM card socket 38

PAD CONNECTORS

Surface mount 39 39

perpendicular

Surface mount 39

parallel

SINGLE ROW

DOUBLE ROW

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

SPRING-LOADED CONNECTORS

PAD CONNECTORS

GENERAL SPECIFICATIONS

Due to technical progress, all information provided is subject to change without prior notice.

The values listed below are general specs applying for PRECI-DIP spring-loaded connectors. Please see individual catalog page for additional and

product specific technical data.

OPERATING TEMPERATURE RANGE -55 ... +125 °C (-55 °… +85 °C with music wire spring)

CLIMATIC CATEGORY (IEC) 55/85/21

OPERATING HUMIDITY RANGE Annual mean 75%

MAX. WORKING VOLTAGE 100 VRMS/150 VDC (2.54 mm grid)

PRECI-DIP connectors designated « Series Preci-Dip Connector » are recognized by UL LLC and listed under « Connectors for Use

in Data, Signal, Control and Power Applications », File Nr. E174442.

PACKAGING

• Standard connector packaging is card box.

• SMD mount connectors available on request

with Tape & Reel packaging acc. to EIA Standard 481.

These products are marked with the symbol:

Please consult www.precidip.com for availability,

size of tape, size of reel, number of components

per reel, packing units and part numbers.

MECHANICAL CHARACTERISTICS

BASIC LOW RESISTANCE LOW RESISTANCE

HOLLOW PISTON TYPE SHAPED PISTON TYPE CLIP IN-LINE DESIGN TYPE

MIN. INITIAL HEIGHT 3 mm 6 mm 10 mm

STROKE/HEIGHT RATIO Max. 0.3 Max. 0.2 Max. 0.15

MAX STROKE 2 mm 2 mm 1.5 mm

MIN. INITIAL SPRING FORCE 0.2 N 0.2 N 0.2 N

ELECTRICAL CHARACTERISTICS

INSULATION RESISTANCE BETWEEN ANY TWO ADJACENT CONTACTS Min. 10’000 M: at 500 VAC

CAPACITANCE BETWEEN ANY TWO ADJACENT CONTACTS Max. 1 pF

ENVIRONMENTAL CHARACTERISTICS

The sockets withstand the following environmental tests without mechanical

and electrical defects:

• Dry heat steady state IEC 60512-11-9.11i / 60068-2-2.Bb: 125 °C, 16 h

• Damp heat cyclic IEC 60512-11-12.11m / 60068-2-30.Db: 25/55 °C, 90 – 100 %rH,

1 cycle of 24 h

• Cold steady state IEC 60512-11-10.11j / 60068-2-1.A: -55 °C, 2 h

• Thermal shock IEC 60512-11-4.11d / 60068-2-14.Na: -55/125 °C, 5 cycles 30 min

• Sinusoidal vibrations IEC 60512-6-4.6d / 60068-2-6.Fc: 10 to 500 Hz, 10 g,

1 octave/min, 10 cycles for each axis

• Shock IEC 60512-6-3.6c / 60068-2-27.Ea: 50 g, 11 ms, 3 shocks in three axis

During the above two tests, no contact interruption >50 ns does appear.

• Solderability J-STD-002A, Test A, 245 °C, 5 s, solder alloy SnAg3.8Cu0.7

• Resistance to soldering heat J-STD-020C, 260 °C, 20 s

• Moisture sensitivity J-STD-020C level 1

T & R Packaging

SPRING–LOADED CONNECTORS

TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31)

INSULATOR Black glass filled polyester PCT-GF30-FR

FLAMMABILITY UL 94V-O

PISTON AND BARREL Brass CuZn36Pb3 (C36000)

CONTACT CLIP Beryllium copper (C17200)

SPRING Stainless steel X12 CrNi177, DIN 17224

MAX. STROKE 1.4 mm

FORCES 0.2 N initial 0.36 N at 1/2 stroke

MECHANICAL LIFE 40'000 cycles

OPERATING CURRENT Max. 2 A

CONTACT RESISTANCE 20 m: (static measurement, halfway position)

ORDERING INFORMATION ROHS COMPLIANT PARTS

PLATING CODE PIN PISTON

28 Tin 0.3 μm min. gold

Fine pitch connectors with spring-loaded contacts (SLC), solder tail. High-rel contacts with clip, patented in-line design.

See page 178 for plating specs.

Surface mount miniature SLC connectors available on request.

Please consult.

8PD-28-0014-01-812

Straight SLC connector, solder tail, single row

Standard number of contacts: 14

Please consult for other pin number or partially equipped connectors

8PC-28-0014-01-828

Right angle SLC connector, solder tail, single row

Standard number of contacts: 14

Please consult for other pin number or partially equipped connectors

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

Due to technical progress, all information provided is subject to change without prior notice.

SPRING-LOADED CONNECTORS

1.25 mm GRID / SINGLE ROW / SOLDER TAIL

SPRING–LOADED CONNECTORS

Due to technical progress, all information provided is subject to change without prior notice.

Basic modular connectors with spring-loaded contacts (SLC), surface mount. Contacts with shaped piston design for low profile.

See page 178 for plating specs.

NNN number of poles. Replace NNN with the requested number of poles,

e.g. 821-SS-NNN-30-012101 for a single row version with 16 pins

becomes 821-SS-016-30-012101.

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

SPRING-LOADED CONNECTORS

2 mm GRID / SINGLE ROW / DOUBLE ROW /SURFACE MOUNT

TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31)

INSULATOR Black glass filled polyester LCP-GF30-FR

FLAMMABILITY UL 94V-O

PISTON AND BARREL Brass CuZn36Pb3 (C36000)

SPRING Stainless steel X12 CrNi177, DIN 17224

MAX. STROKE 1.1 / 1.4 mm according to total height

FORCES 0.25 N initial 0.7 N at 0.7 mm stroke

MECHANICAL LIFE 50'000 cycles

OPERATING CURRENT Max. 3.5 A / 7A peak

CONTACT RESISTANCE 10 m: (static measurement, halfway position)

COPLANARITY

SMD TERMINATIONS

Max. 0.1 mm (measured on 25 mm long connectors)

ORDERING INFORMATION ROHS COMPLIANT PARTS

PLATING CODE BARREL PISTON

S1 0.25 μm gold 0.5 μm gold

Bulk : T & R Packaging with pick & place cap* :

821-S1-NNN-30-XXX101 821-S1-NNN-30-XXX191

Surface mount SLC connector, low profile, single row

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

Bulk : T & R Packaging with pick & place cap* :

823-S1-NNN-30-XXX101 823-S1-NNN-30-XXX191

Surface mount SLC connector, low profile, double row

AVAILABILITY FROM 4 to 20 contacts

(standard number of contacts: 20)

AVAILABLE CONNECTOR HEIGHTS

INITIAL HEIGHT A (mm) STROKE S (mm) XXX CODE

5 1.1 012

5.5 1.1 013

6 1.4 014

6.5 1.4 015

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

34 Due to technical progress, all information provided is subject to change without prior notice.

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

SPRING-LOADED CONNECTORS

2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SOLDER TAIL

TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31)

INSULATOR Black glass filled polyester PCT-GF30-FR

FLAMMABILITY UL 94V-O

PISTON AND BARREL Brass CuZn36Pb3 (C36000)

SPRING Music wire DIN 17223, gold plated

MAX. STROKE 1.4 mm

FORCES 0.25 N initial 0.85 N at 1/2 stroke

MECHANICAL LIFE 50'000 cycles

OPERATING CURRENT Max. 3.5 A

CONTACT RESISTANCE 10 m: (static measurement, halfway position)

ORDERING INFORMATION ROHS COMPLIANT PARTS

PLATING CODE BARREL PISTON

S1 0.25 μm gold 0.5 μm gold

SS 0.5 μm gold 0.5 μm gold

Low resistance modular connectors with spring-loaded contacts (SLC), solder tail. Contacts with improved, shaped piston design.

See page 178 for plating specs.

NNN number of poles: Replace NNN with the requested number of poles,

e.g. 813-S1-NNN-10-014101 for a double row version with 16 pins

becomes 813-S1-016-10-014101.

811-S1-NNN-10-XXX101

Straight SLC connector, low profile, solder tail, single row

AVAILABILITY FROM 2 to 64 contacts

(standard number of contacts: 64)

813-S1-NNN-10-XXX101

Straight SLC connector, low profile, solder tail, double row

AVAILABILITY FROM 4 to 72 contacts

(standard number of contacts: 72)

813-SS-NNN-10-474101

Straight SLC connector, solder tail, double row

AVAILABILITY FROM 4 to 64 contacts

(standard number of contacts: 64)

AVAILABLE CONNECTOR HEIGHTS

INITIAL HEIGHT A (mm) PLASTIC BODY HEIGHT B (mm) XXX CODE

6 4 014

6.5 4 015

7 4 016

7.5 4 017

Basic modular connectors with spring-loaded contacts (SLC), surface mount. Contacts with hollow piston design for low profile.

See page 178 for plating specs.

NNN number of poles. Replace NNN with the requested number of poles,

e.g. 811-SS-NNN-30-002101 for a single row version with 16 pins

becomes 811-SS-016-30-002101.

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

SPRING-LOADED CONNECTORS

2.54 mm GRID / SINGLE ROW / DOUBLE ROW /SURFACE MOUNT

TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31)

INSULATOR Black glass filled polyester PCT-GF30-FR

FLAMMABILITY UL 94V-O

PISTON AND BARREL Brass CuZn36Pb3 (C36000)

SPRING Stainless steel X12 CrNi177, DIN 17224

(Music wire DIN 17223, gold plated for 811...008101)

MAX. STROKE 1.4 mm (1 mm for 811-...-008101

and 1.15 mm for 811/813-...-001101)

FORCES 0.25 N initial 0.6 N at 1/2 stroke

MECHANICAL LIFE 100'000 cycles

OPERATING CURRENT Max. 3.5 A

CONTACT RESISTANCE 15 m : (static measurement, halfway position)

COPLANARITY

SMD TERMINATIONS

Max. 0.1 mm (measured on 25 mm long connectors)

ORDERING INFORMATION ROHS COMPLIANT PARTS

PLATING CODE BARREL PISTON

SS 0.5 μm gold 0.5 μm gold

SPRING–LOADED CONNECTORS

Due to technical progress, all information provided is subject to change without prior notice.

Bulk : T & R Packaging with pick & place cap* :

811-SS-NNN-30-008101 811-SS-NNN-30-008191

Surface mount SLC connector, very low profile, single row

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

Bulk : T & R Packaging with pick & place cap* :

811-SS-NNN-30-XXX101 811-SS-NNN-30-XXX191

Surface mount SLC connector, low profile, single row

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

Bulk : T & R Packaging with pick & place cap* :

813-SS-NNN-30-XXX101 811-SS-NNN-30-XXX191

Surface mount SLC connector, low profile, double row

AVAILABILITY FROM 4 to 20 contacts

(standard number of contacts: 20)

AVAILABLE CONNECTOR HEIGHTS

INITIAL HEIGHT A (mm) STROKE S (mm) PLASTIC BODY HEIGHT B (mm) XXX CODE

4.5 1.15 2.95 001

5 1.4 2.95 002

5.5 1.4 2.95 003

6 1.4 4 004

6.5 1.4 4 005

7 1.4 4 006

7.5 1.4 4 007

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

36 Due to technical progress, all information provided is subject to change without prior notice.

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

SPRING-LOADED CONNECTORS

2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT

TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31)

INSULATOR Black glass filled polyester PCT-GF30-FR

FLAMMABILITY UL 94V-O

PISTON AND BARREL Brass CuZn36Pb3 (C36000)

SPRING Music wire DIN 17223, gold plated

MAX. STROKE 1.4 mm

FORCES 0.25 N initial 0.85 N at 1/2 stroke

MECHANICAL LIFE 50'000 cycles

OPERATING CURRENT Max. 3.5 A

CONTACT RESISTANCE 10 m: (static measurement, halfway position)

COPLANARITY

SMD TERMINATIONS

Max. 0.1 mm (measured on 25 mm long connectors)

ORDERING INFORMATION ROHS COMPLIANT PARTS

PLATING CODE BARREL PISTON

S1 0.25 μm gold 0.5 μm gold

Low resistance modular connectors with spring-loaded contacts (SLC), surface mount. Contacts with improved shaped piston design.

See page 178 for plating specs.

NNN number of poles. Replace NNN with the requested number of poles,

e.g. 813-S1-NNN-30-014101 for a double row version with 16 pins

becomes 813-S1-016-30-014101.

Bulk : T & R Packaging with pick & place cap* :

811-S1-NNN-30-XXX101 811-S1-NNN-30-XXX191

Surface mount SLC connector, low profile, single row

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

Bulk : T & R Packaging with pick & place cap* :

813-S1-NNN-30-XXX101 813-S1-NNN-30-XXX191

Surface mount SLC connector, low profile, double row

AVAILABILITY FROM 4 to 20 contacts

(standard number of contacts: 20)

AVAILABLE CONNECTOR HEIGHTS

INITIAL HEIGHT A (mm) PLASTIC BODY HEIGHT B (mm) XXX CODE

6 4 014

6.5 4 015

7 4 016

7.5 4 017

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

811-SS-NNN-30-XXX101

Surface mount SLC connector, low profile, single row, with 2 positioning pins

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

813-SS-NNN-30-XXX101

Surface mount SLC connector, double row, with 4 positioning pins

AVAILABILITY FROM 4 to 20 contacts

(standard number of contacts: 20)

TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31)

INSULATOR Black glass filled polyester PCT-GF30-FR

FLAMMABILITY UL 94V-O

PISTON AND BARREL Brass CuZn36Pb3 (C36000)

SPRING Stainless steel X12 CrNi177, DIN 17224

MAX. STROKE 1.4 mm (1.15 mm for 811/813-...-021101)

FORCES 0.25 N initial 0.6 N at 1/2 stroke

MECHANICAL LIFE 100'000 cycles

OPERATING CURRENT Max. 3.5 A

CONTACT RESISTANCE 15 m : (static measurement, halfway position)

COPLANARITY

SMD TERMINATIONS

Max. 0.1 mm (measured on 25 mm long connectors)

ORDERING INFORMATION ROHS COMPLIANT PARTS

PLATING CODE BARREL PISTON

SS 0.5 μm gold 0.5 μm gold

Basic modular connectors with spring-loaded contacts (SLC), surface mount with positioning pins. Contacts with hollow piston design for low profile.

See page 178 for plating specs.

NNN number of poles. Replace NNN with the requested number of poles,

e.g. 813-SS-NNN-30-021101 for a double row version with 16 pins

becomes 813-SS-016-30-021101.

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

SPRING-LOADED CONNECTORS

2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT

SPRING–LOADED CONNECTORS

Due to technical progress, all information provided is subject to change without prior notice.

AVAILABLE CONNECTOR HEIGHTS

INITIAL HEIGHT A (mm) STROKE S (mm) PLASTIC BODY HEIGHT B (mm) XXX CODE

4.5 1.15 2.95 021

5 1.4 2.95 022

5.5 1.4 2.95 023

6 1.4 4 024

6.5 1.4 4 025

7 1.4 4 026

7.5 1.4 4 027

38 Due to technical progress, all information provided is subject to change without prior notice.

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

SPRING-LOADED CONNECTORS

2.54 mm GRID / SINGLE ROW / DOUBLE ROW / SURFACE MOUNT

TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31)

INSULATOR Black glass filled polyester PCT-GF30-FR

FLAMMABILITY UL 94V-O

PISTON

AND BARREL Brass CuZn36Pb3 (C36000)

8PM...131 8PM...260 8PM...219

SPRING Music wire Stainless steel X12 Stainless steel X12

DIN 17723, CrNi177, CrNi177,

gold plated DIN 17224 DIN 17224

MAX. STROKE 1.5 mm 1.5 mm 1 mm

FORCES 0.2 N initial 0.25 N initial 0.25 N initial

0.9 N at

stroke 0.95 N at

stroke 0.6 N at

stroke

MECHANICAL

LIFE 50'000 cycles 50'000 cycles 100‘000 cycles

OPERATING

CURRENT Max. 3 A Max. 3 A Max. 3 A

CONTACT 10 m: 10 m: 15 m :

RESISTANCE (static measurement, halfway position)

COPLANARITY

SMD TERMINATIONS Max 0.1 mm (measured on 25 mm long connectors)

ORDERING INFORMATION ROHS COMPLIANT PARTS

PLATING CODE BARREL PISTON

11 0.25 μm gold 0.25 μm gold

SS 0.5 μm gold 0.5 μm gold

Connectors with spring-loaded contacts (SLC), surface mount.

Other plating on request (see page 178 for plating specs).

NN number of poles. Replace NN with the requested number of poles,

e.g. 8PM-11-00NN-02-131 with 5 pins becomes 8PM-11-0005-02-131.

Bulk : T & R Packaging* :

8PM-11-00NN-02-260 8PM-11-00NN-02-260191

Parallel surface mount SLC connector for pick & place

automatic assembly

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

Bulk : T & R Packaging* :

8PM-11-00NN-02-131 8PM-11-00NN-02-131191

Parallel surface mount SLC connector for pick & place

automatic assembly

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

Bulk : T & R Packaging* :

8PM-SS-0006-02-219 8PM-SS-0006-02-219191

SLC connector for chipcards with contacting pads

acc. to ISO 7816

Standard number of contacts: 6

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

WWW.PRECIDIP.COM TEL +41 32 421 04 00 SALES@PRECIDIP.COM

PAD CONNECTORS

SINGLE ROW / DOUBLE ROW / SURFACE MOUNT

TECHNICAL SPECIFICATIONS (FOR GENERAL SPECS, SEE PAGE 31)

INSULATOR Black glass filled polyester PCT-GF30-FR

FLAMMABILITY UL 94V-O

CONTACT Brass CuZn36Pb3 (C36000)

CONTACTING AREA Ø 1.5 mm

OPERATING CURRENT Max. 3.5 A

DIELECTRIC STRENGTH Min. 1'000 VRMS

COPLANARITY

SMD TERMINATIONS

Max. 0.1 mm (measured on 25 mm long connectors

)

ORDERING INFORMATION ROHS COMPLIANT PARTS

PLATING CODE TERMINATION CONTACTING AREA

10, 11 0.25 μm gold 0.25 μm gold

Pad connectors with fixed contacts, counterparts for spring- loaded connectors.

See page 178 for plating specs.

NNN / NN number of poles. Replace NNN or NN with the requested

number of poles, e.g. 802-10-NNN-30-507101 for a double row version

with 20 pins becomes 802-10-020-30-507101.

SPRING–LOADED CONNECTORS

Due to technical progress, all information provided is subject to change without prior notice.

Bulk : T & R Packaging* :

800-10-NNN-30-507101 800-10-NNN-30-507191

SMD pad connector, single row, perpendicular mount

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

Bulk : T & R Packaging* :

802-10-NNN-30-507101 802-10-NNN-30-507191

SMD pad connector, double row, perpendicular mount

AVAILABILITY FROM 4 to 20 contacts

(standard number of contacts: 20)

Bulk : T & R Packaging* :

8MM-11-00NN-02-131 8MM-11-00NN-02-131191

SMD pad connector, single row, parallel mount

AVAILABILITY FROM 2 to 10 contacts

(standard number of contacts: 10)

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

*Please consult www.precidip.com for availability size of tape, size of

reel, number of components per reel and packing units.

www.preci-dip.com

PRECI - DIP SA Rue S ai nt-M aur i c e 3 4 P.O.B ox 3 41 C H -2800 D el émo nt / S wi t ze r lan d

PHONE +41 (0)32 421 0 4 0 0 FAX +41 (0)32 421 0 4 01 E-MAIL sales@precidip.com www.precidip.com