2N5545/46/47/JANTX/JANTXV
Vishay Siliconix
Document Number: 70253
S-04031—Rev. C, 04-Jun-01 www.vishay.com
8-1
Monolithic N-Channel JFET Duals
PRODUCT SUMMARY
Part Number VGS(off) (V) V(BR)GSS Min (V) gfs Min (mS) IG Max (pA) jVGS1 – VGS2j Max (mV)
2N5545 –0.5 to –4.5 –50 1.5 –50 5
2N5546 –0.5 to –4.5 –50 1.5 –50 10
2N5547 –0.5 to –4.5 –50 1.5 –50 15
FEATURES BENEFITS APPLICATIONS
DMonolithic Design
DHigh Slew Rate
DLow Offset/Drift Voltage
DLow Gate Leakage: 3 pA
DLow Noise
DHigh CMRR: 100 dB
DTight Differential Match vs. Current
DImproved Op Amp Speed, Settling Time
Accuracy
DMinimum Input Error/Trimming Requirement
DInsignificant Signal Loss/Error Voltage
DHigh System Sensitivity
DMinimum Error with Large Input Signal
DWideband Differential Amps
DHigh-Speed, Temp-Compensated,
Single-Ended Input Amps
DHigh-Speed Comparators
DImpedance Converters
DESCRIPTION
The 2N5545/5546/5547JANTX/JANTXV are monolithic dual
n-channel JFETs designed to provide high input impedance
(IG < 50 pA) for general-purpose differential amplifiers. The
2N5545 features minimum system error and calibration (5 mV
offset maximum).
TO-71
Top View
G1
S1
D1
G2
D2
S2
1
2
3
6
5
4
ABSOLUTE MAXIMUM RATINGS
Gate-Drain, Gate-Source Voltage –50 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Gate Current 30 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead Temperature (1/16” from case for 10 sec.) 300_C. . . . . . . . . . . . . . . . . . .
Storage Temperature –65 to 200_C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Junction Temperature –55 to 150_C. . . . . . . . . . . . . . . . . . . . . . . . . .
Power Dissipation : Per Sidea250 mW. . . . . . . . . . . . . . . . . . . . . . . .
Totalb500 mW. . . . . . . . . . . . . . . . . . . . . . . . . . .
Notes
a. Derate 2 mW/_C above 25_C
b. Derate 4 mW/_C above 25_C
2N5545/46/47/JANTX/JANTXV
Vishay Siliconix
www.vishay.com
8-2 Document Number: 70253
S-04031—Rev. C, 04-Jun-01
SPECIFICATIONS (TA = 25_C UNLESS OTHERWISE NOTED)
Limits
2N5545 2N5546 2N5547
Parameter Symbol Test Conditions TypaMin Max Min Max Min Max Unit
Static
Gate-Source
Breakdown Voltage V(BR)GSS IG = –1 mA, VDS = 0 V –57 –50 –50 –50
Gate-Source
Cutoff V oltage VGS(off) VDS = 15 V, ID = 0.5 nA –2–0.5 –4.5 –0.5 –4.5 –0.5 –4.5 V
Saturation Drain CurrentbIDSS VDS = 15 V, VGS = 0 V 3 0.5 8 0.5 8 0.5 8 mA
VGS = –30 V, VDS = 0 V –10 –100 –100 –100 pA
Gate Reverse Current IGSS TA = 150_C–20 –150 –150 –150 nA
Gate Operating Current IGVDG = 15 V, ID = 200 mA–3–50 –50 –50 pA
Gate-Source
Forward Voltage VGS(F) IG = 1 mA , VDS = 0 V 0.7 V
Dynamic
Common-Source Forward
Transconductancebgfs VDS = 15 V, VGS = 0 V 2.5 1.5 6.0 1.5 6.0 1.5 6.0 mS
Common-Source
Output Conductancebgos
VDS = 15 V, VGS = 0 V
f = 1 kHz 2 25 25 25 mS
Common-Source
Input Capacitance Ciss VDS = 15 V, VGS = 0 V 3.5 6 6 6
Common-Source Reverse
T ransfer Capacitance Crss
VDS = 15 V, VGS = 0 V
f = 1 MHz 1.3 2 2 2 pF
Equivalent Input
Noise Voltage enVDS = 15 V, ID = 200 mA
f = 10 Hz 20 180 200 nV⁄
√Hz
Noise Figure NF RG = 1 MW0.1 3.5 5 dB
Matching
Differential VDG = 15 V, ID = 50 mA5 10 15
Differential
Gate-Source Voltage |VG7S1 –VGS2|VDG = 15 V, ID = 200 mA5 10 15 mV
Gate-Source Voltage
Differential Change
with Temperature
D|VGS1 –VGS2|
DTVDG = 15 V, ID = 200 mA
TA = –55 to 125_C10 20 40 mV/
_C
Saturation Drain
Current RatiocIDSS1
IDSS2 VDS = 15 V, VGS = 0 V 0.98 0.95 1 0.9 1 0.9 1
T ransconductance Ratiocgfs1
gfs2 VDS = 15 V, ID = 200 mA
f = 1 kHz 0.99 0.97 1 0.95 1 0.9 1
Differential Output
Conductance |gos1 –gos2|VDG = 15 V, VGS = 0 V
f = 1 kHz 0.1 1 2 3 mS
Differential Gate Current |IG1 –IG2|VDG = 15 V, ID = 200 mA
TA = 125_C1 5 5 5 nA
Notes
a. Typical values are for DESIGN AID ONLY, not guaranteed nor subject to production testing. NQP
b. Pulse test: PW v300 ms duty cycle v3%.
c. Assumes smaller value in the numerator .
2N5545/46/47/JANTX/JANTXV
Vishay Siliconix
Document Number: 70253
S-04031—Rev. C, 04-Jun-01 www.vishay.com
8-3
TYPICAL CHARACTERISTICS (TA = 25_C UNLESS OTHERWISE NOTED)
5
0–5–4–3–2–1
4
2
1
00302010 40 50
3
2.6
2.2
1
3
Drain Current and Transconductance
vs. Gate-Source Cutoff Voltage Gate Leakage Current
VGS(off) – Gate-Source Cutoff Voltage (V) VDG – Drain-Gate Voltage (V)
0.1 pA
10 pA
1 pA
IDSS @ VDS = 15 V, VGS = 0 V
gfs @ VDG = 15 V, VGS = 0 V
f = 1 kHz
gfs
IDSS
IGSS @ 125_C
IGSS @ 25_C
TA = 125_C
TA = 25_C
200 mA
100 pA
1 nA
10 nA
100 nA
5
012168420
4
3
2
1
0
Output Characteristics Output Characteristics
VDS – Drain-Source Voltage (V) VDS – Drain-Source Voltage (V)
–0.2 V
–0.4 V
–0.6 V
–0.3 V
–0.9 V
–0.6 V
–2.1 V
–1.5 V
–0.8 V
–1.0 V
–1.2 V
–1.2 V
–1.8 V
VGS(off) = –2 V
VGS = 0 V
5
4
3
2
1
0012168420
VGS = 0 V
VGS(off) = –3 V
2
1.6
1.2
0.8
0.4
0
Output Characteristics Output Characteristics
VDS – Drain-Source Voltage (V) VDS – Drain-Source Voltage (V)
–0.2 V
–0.4 V
–0.6 V
–0.8 V
–1.0 V
–1.2 V
–1.4 V
VGS(off) = –2 V
VGS = 0 V
2.5
2.0
1.5
1.0
0.5
00 0.6 0.80.40.2 1
VGS = 0 V
VGS(off) = –3 V –0.3 V
–0.9 V
–0.6 V
–2.1 V
–1.5 V
–1.2 V
–2.4 V
–1.8 V
1.8
1.4
50 mA
IG @ ID = 200 mA
–1.6 V
–1.4 V
0 0.6 0.80.40.2 1
–2.4 V
50 mA
gfs – Forward Transconductance (mS)
IDSS – Saturation Drain Current (mA)
IG – Gate Leakage
ID – Drain Current (mA)
ID – Drain Current (mA)ID – Drain Current (mA)
ID – Drain Current (mA)
2N5545/46/47/JANTX/JANTXV
Vishay Siliconix
www.vishay.com
8-4 Document Number: 70253
S-04031—Rev. C, 04-Jun-01
TYPICAL CHARACTERISTICS (TA = 25_C UNLESS OTHERWISE NOTED)
0.01 0.1 1
10
1
0–1.5–1.0–0.5 –2.0 –2.5
4
3
2
1
0
0.01 0.1 1
130
120
80
110
100
90
0.01 0.1 1
100
10
1
100
5
0.1 10.01
100
80
60
40
20
0
Transfer Characteristics Gate-Source Differential Voltage
vs. Drain Current
Voltage Differential with Temperature
vs. Drain Current Common Mode Rejection Ratio
vs. Drain Current
CMRR (dB)
VGS – Gate-Source Voltage (V) ID – Drain Current (mA)
ID – Drain Current (mA) ID – Drain Current (mA)
ID – Drain Current (mA)
2N5545
TA = –55_C
125_C
VGS(off) = –2 V VDG = 15 V
TA = 25_C
5 – 10 V
VGS(off) = –3 V
Circuit Voltage Gain vs. Drain Current
2N5547
2N5545
2N5547
On-Resistance vs. Drain Current
ID – Drain Current (mA)
0.01 0.1 1
1 k
800
600
400
200
0
VGS(off) = –2 V
AV+gfs RL
1)RLgos
RL+10 V
ID
Assume VDD = 15 V, VDS = 5 V
VDS = 10 V
VGS(off) = –2 V VGS(off) = –3 V
25_C
VDG = 15 V
DTA = 25 to 125_C
DTA = –55 to 25_C
DVDG = 10 – 20 V
(mV)
VGS1 VGS2
–
V/ _C
()
t
D
Dm
VGS1 VGS2
–
VGS1 VGS2
–
DVDG
CMRR = 20 log D
rDS(on) – Drain-Source On-Resistance ( Ω )
ID – Drain Current (mA)
AV – Voltage Gain
2N5545/46/47/JANTX/JANTXV
Vishay Siliconix
Document Number: 70253
S-04031—Rev. C, 04-Jun-01 www.vishay.com
8-5
TYPICAL CHARACTERISTICS (TA = 25_C UNLESS OTHERWISE NOTED)
10 100 1 k 100 k10 k
10
0–12 –16 –20–8–4
8
6
4
2
0
VGS – Gate-Source Voltage (V)
Common-Source Input Capacitance
vs. Gate-Source Voltage
– Input Capacitance (pF)Ciss
VDS = 0 V
5 V
f = 1 MHz 5
0–12 –20–16–8–4
4
3
2
1
0
Common-Source Reverse Feedback
Capacitance vs. Gate-Source Voltage
– Reverse Feedback Capacitance (pF)Crss
VGS – Gate-Source Voltage (V)
VDS = 0 V
5 V
15 V
f = 1 MHz
16
12
8
4
0
20 Equivalent Input Noise Voltage vs. Frequency
f – Frequency (Hz)
VDS = 10 V
ID @ 200 mA
VGS = 0 V
2.5
2.0
1.5
1.0
0.5
00.01 0.1 1
Output Conductance vs. Drain Current
ID – Drain Current (mA)
TA = –55_C
125_C
0.01 0.1 1
2.5
2.0
1.5
1.0
0.5
0
Common-Source Forward Transconductance
vs. Drain Current
ID – Drain Current (mA)
TA = –55_C
125_C
1 k
0–3–5–4–2–1
800
600
400
200
0
10
8
6
4
2
0
On-Resistance and Output Conductance
vs. Gate-Source Cutoff Voltage
VGS(off) – Gate-Source Cutoff Voltage (V)
rDS @ ID = 100 mA, VGS = 0 V
gos @ VDS = 15 V, VGS = 0 V, f = 1 kHz
rDS
gos
25_C
25_C
VGS(off) = –2 V VDS = 15 V
f = 1 kHz
VGS(off) = –2 V VDS = 15 V
f = 1 kHz
15 V
S)gos– Output Conductance ( m
en – Noise Voltage nV / Hz
gfs – Forward Transconductance (mS)
rDS(on) – Drain-Source On-Resistance ( Ω ) gos – Output Conductance (µS)
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
