Amphenol
HDM Series
Hermaphroditic Duplex
Miniature
Amphenol
The Fibre Optic Hermaphroditic range has now developed an additional product,
the Hermaphroditic Duplex. This product has been specially designed to facilitate the
interconnection of Fibre Optic Cable Assemblies, thus eliminating the need for polarising the
assemblies and the use of in-line adaptors.
■
Lightweight, small design, outer diameter of coupling ring measures less than 22.00mm.
■
Low loss ceramic PC technology in multimode and singlemode.
■
Connector and monobloc environmentally sealed.
■
Fully hermaphroditic wipe clean bayonet mating mechanism.
■
Fully removable front receptacle shell, for cleaning whilst in situ.
■
Plug backshell allows for the removal of the ferrule monobloc for ease of cleaning.
■
Choice of materials and plating.
■
High tension cable load capability.
HDM Series - Hermaphroditic Duple x Miniature
T echnical Inf ormation
HDM Series - Hermaphroditic Duplex Miniature
Performance
Optical
Insertion loss Typically 0.3dB using 62.5/125
Repeatability <0.15dB
Fibre types 50/125 62.5/125
Termination method Epoxy/polish
Environmental
Temperature range -55ºC / +85ºC cable dependant
Mechanical
Durability 500 matings
Materials Shell: Aluminium
Ferrule: Zirconia
Alignment sleeve: Ceramic
Seals: Silicone
Termination Tooling
Basic kit 927 - 100 - 3000
HDM add on 927 - 100 - 4200
Consumable pack 927 - 100 - 6000 Approximately 50 terminations
49
Amphenol
Notice: Products are sold subject to Amphenol’s conditions of sale (“the standard conditions”). All specifications and statements contained herein are believed to be correct at the time of
printing, but no representation or warranty , express or implied, is given as to any specification or statement contained herein. Product specifications including performance characteristics are
typical only and subject to deviation. Specifications are also subject to change without notice. Users should not assume that all safety measures are indicated or that other measures may not
be required. No representation or warranty , express or implied, is given that any use of products (including any stated or suggested use) does not infringe any patent, registered design or other
third party rights and no stated or suggested use of products can be taken to recommend any such infringement.
For further information on cables, connectors and assemblies please consult your local office.
Product specifications and performance characteristics are typical only, and subject to change.
Thanet Way, Whitstable, Kent. CT5 3JF. Tel: 01227 773200 Fax: 01227 276571
HDM Series - Hermaphroditic Duplex Miniature
30.03.2000
Part Number Information
Plug 062
Panel Mount Receptacle 072
HDM
Series XXX XX XXX
Olive Drab Cadmium RW
Olive Drab Zinc Cobalt RZ
Cable Variant 021 Simplex ruggedised 2mm Ø/D multimode (Receptacle only)
011 Simplex ruggedised 3mm Ø/D multimode (Receptacle only)
(Other cable options 014 Duplex 5.5mm Ø/D multimode
available on request) 018 Loop back version Duplex multimode
Sub Assembly
HDMSeries XXX XX XXX
Olive Drab Cadmium RW
Olive Drab Zinc Cobalt RZ
Cable Variant (See above)
Plug 062
Jam Nut Receptacle In Line 072
Dust Cap 960-635
Sub Assembly
Front Shell Sub Assembly
HDMSeries XXX XX
49
Plug 062
Jam Nut Receptacle In Line 072
Olive Drab Cadmium RW
Olive Drab Zinc Cobalt RZ
