Weii 2.4 GHz Ceramic Antenna Part no: SRCW004 ceriiANT(R) Product Specification 1. Features: 2.4GHz applications Bluetooth, WiFi, Zigbee, ISM. Ultra small ceramic chip solution. High Efficiency. SMD mounted. Resistant to de-tuning. Omni-directional RoHS compliant 2. Description For use in all 2.4GHz applications. Compact design with simple integration and implementation. Effective on varying GND plane sizes. Coexists well in multiple antenna systems. Resistant to de-tuning effects means devices can work well in different environments. Ideal antenna choice for small wearable devices. 3. Applications: 4. Quick Specs: Part Number SRCW004 Frequency 2.4 - 2.5GHz Medical devices Operating Temp -40C to125C PNDs Antenna Dimensions 1.0 x 0.5 x 0.5 Dongles Antenna Clearance Area 9mm x 4.5mm Sensors Average Efficiency 70% Small wearable devices Headsets Antennas for Wireless M2M Applications 1 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 5. Mechanical Specifications Product Name Weii 2.4GHz Chip Antenna Part Number SRCW004 Frequency Range 2.4 - 2.5 GHz Polarization Linear Operating Temperature -40 C to +120 C Weight <0.015 g Impedance with matching 50 Antenna Type SMD Dimensions 1.0 x 0.5 x 0.5 (mm) Footprint Size 9.0 x 4.5 (mm) 6. RF Specifications Typical Performance Average Peak Gain 2.5 dBi Average Gain -1.5 dBi Average Efficiency Maximum Return Loss Maximum VSWR 70% <-10 dB 1.6:1 Data measured on Antenovas reference PCB. Data given for the 2.402 - 2.480 GHz frequency range Antennas for Wireless M2M Applications 2 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 7. RF Performance 7-1 Return Loss 5 [dB] Atyune 0 -5 -10 2 1 -15 -20 -25 2300 2400 MARKERS: MHz TRAC E23.S1P - S11 2500 [MHz] 2600 dB 1: 2402 -15.81 2: 2480 -12.90 7-2 VSWR 10 [] Atyune 9 8 7 6 5 4 3 2 1 1 2300 2400 2 2500 [MHz] 2600 MARKERS: MHz TRAC E23.S1P - S11 1: 2402 2: 2480 1.39 1.59 Data measured on Antenovas reference PCB. Data given for the 2.402 - 2.480 GHz frequency range Antennas for Wireless M2M Applications 3 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 7-3 Radiation Pattern dBi 3D pattern at 2.45GHz Drag to rotate pattern by using Adobe Reader Data measured on Antenovas reference PCB. Data given for the 2.402 - 2.480 GHz frequency range Antennas for Wireless M2M Applications 4 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 8. Antenna Dimensions L W H Length Width Height 1.0 0.1 0.5 0.15 0.5 0.1 All dimensions in mm 9. Antenna footprint P L W P Length Width Pitch 0.6 0.1 0.5 0.15 1.0 0.1 W L All dimensions in mm PCB copper pads * CAD files of the antenna footprint are available at www.antenova-m2m.com. Antennas for Wireless M2M Applications 5 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 9-1 Schematic The circuit required for the antenna is shown here. The RF feed connection and GND connections are critical to the function of the antenna, and must be followed as shown. This circuit can be used for the circuit capture of the host PCB. A1 R1 Pi Network Port To RF front end A1 Antenna R1 Tuning Component (Default = 0R Resistor) Antennas for Wireless M2M Applications 6 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 9-2 Antenna host PCB Layout The copper tracks etched on the PCB form an integral part of the antenna, and any deviation from the advised layout shown below will result in a loss in the antenna performance. It is best that the copper track layout is imported from CAD files which are available from Antenova M2M on request. Please contact info@antenova-m2m.com for further details. PCB layout without shown without solder mask for illustration purpose. only. Antennas for Wireless M2M Applications 7 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 10 Electrical interface 10-1 Transmission Line All transmission lines should be designed to have a characteristic impedance of 50 * The length of the transmission lines should be kept to a minimum * Any other parts of the RF system like transceivers, power amplifiers, etc, should also be designed to have an impedance of 50 Once the material for the PCB has been chosen (PCB thickness and dielectric constant), a coplanar transmission line can easily be designed using any of the commercial software packages for transmission line design. For the chosen PCB thickness, copper thickness and substrate dielectric constant, the program will calculate the appropriate transmission line width and gaps on either side of the track so the characteristic impedance of the coplanar transmission line is 50 . Antennas for Wireless M2M Applications 8 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 10-2 Matching circuit The antenna requires a matching circuit that must be optimized for each product. The matching circuit will require up to three components (0402 size), and an additional tuning element is also required (0402 size) the following pad layout should be designed into the device so the correct circuit can be installed. Note: The tuning component by default is a 0402 zero ohm resistor. A1 R1 Port A1 R1 In addition to the matching circuit, a separate DC blocking capacitor will also be required between the radio and the antenna matching circuit. Note: The component values for the matching circuit will vary depending on the size of the PCB and surrounding components. The impedance of the antenna should be measured before selecting suitable matching components. Antenova M2M offers this service on request. Contact techsupport@antenova-m2m.com or further information. Antennas for Wireless M2M Applications 9 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 10-3 Host PCB integration guidelines Placement The antenna should be placed in the best suited position to effectively radiate. Whichever the PCB size used, the most ideal position is along the longest edge of the PCB at the centre of that edge. Antenna placed equal distance from either side Where the centre is not a viable option the antenna can be placed offset on the PCB to within the limits shown below. 7mm 7mm Antennas for Wireless M2M Applications 10 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 Minimum recommended host PCB size The recommended minimum PCB size for the antenna is defined by the PCB edge the antenna is to be placed. For good performance to be maintained this minimum size is recommended to be no less than 30mm in length. Below shows the change in performance when the ground plane size is reduced. 60mm 40mm 30mm 30 x 30mm Antennas for Wireless M2M Applications 11 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 MIMO Applications example This ceramic antenna is ideal for applications requiring multiple antennas for MIMO systems. In this example two antennas are shown mounted on Antenova evaluation PCB and represents a good example when applying this antenna within a MIMO system. 15.7mm m 30mm Antenna 1 Antenna 2 Two antennas placed perpendicular to each other at a distance of 28mm from antenna clearance edges. Both antennas were optimised and matched to the same frequency. 10 [dB] Atyune 0 -10 1 2 -20 -30 -40 -50 -60 -70 -80 0 300 600 900 1200 1500 1800 2100 2400 [MHz] 2700 3000 MARKERS: MHz dB Ant1 to Ant2_Isolation.S2P - S11 1: 2400 -17.96 2: 2500 -18.18 Antennas for Wireless M2M Applications 12 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 MIMO Applications example The radiation patterns for the MIMO configuration. Antenna 1 Antenna 2 3D patterns at 2.45GHz Drag to rotate pattern by using Adobe Reader Antenna 1 Antenna 2 Antennas for Wireless M2M Applications 13 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 Wearable device example Wearable devices require the use of small PCB's with limited clearance due to components and close proximity to the human body. Some guidelines to follow when designing small devices are illustrated in the example below. Wrist mounted wearable example for Bluetooth application LCD SRCW004 Plastic case Wrist strap 1 2 1. Antenna clearance must be maintained above and below, with exception of the human body making contact with the external case. 2. Components such as LCD or Battery to keep clear of antenna section. 3. Place antenna on longest PCB edge, in this case close to edge of the circular PCB. 4. Height from human body should be greater than 4mm to minimise losses (>4mm) 5. Outer case should not contain metal close to the antenna where possible. Certain metalized coatings are possible where they do not conduct effectively. Antennas for Wireless M2M Applications 14 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 11. Evaluation PCB The reference board has been designed for evaluation purposes of SRCW004 2.4 GHz and it includes a SMA female connector. SRCW004 Evaluation Board 37mm 60mm To order a reference board contact sales@antenova-m2m.com. Antennas for Wireless M2M Applications 15 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 12. Soldering This antenna is suitable for lead free soldering. The reflow profile should be adjusted to suit the device, oven and solder paste, while observing the following conditions: The maximum temperature should not exceed 240 C However for lead free soldering, a maximum temperature of 255 C for no more than 20 seconds is permitted. - The antenna should not be exposed to temperatures exceeding 120 C more than 3 times during the soldering process. 13. Hazardous material regulation conformance The antenna has been tested to conform to RoHS requirements. A certificate of conformance is available from Antenova M2M's website. 14. Packaging 14-1 Optimal storage conditions for packaged reels Temperature -10C to 40C Humidity Less than 75% RH Shelf Life 24 Months Storage place Away from corrosive gas and direct sunlight Packaging Reels should be stored in unopened sealed manufacturer's plastic packaging. Note: Storage of open reels of antennas is not recommended due to possible oxidization of pads on antennas. If short term storage is necessary, then it is highly recommended that the bag containing the antenna reel is re-sealed and stored in like storage conditions as in above table. The shelf life of the antenna is two years, providing the factory seal on the package has not been broken. Antennas for Wireless M2M Applications 16 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Weii 2.4 GHz Chip Antenna Part No. SRCW004 14-2 Tape Dimensions All dimensions in mm Do E1 E2 F G Po 1.500.1 1.750.1 6.250.1 3.500.05 0.75 min 4.000.1 P1 P2 T T1 W Ao & Bo 4.000.1 2.000.05 1.10 max 0.1 max 8.000.3 See note 1 Notes: The cavity defined by Ao, Bo, and T shall be configured to provide sufficient clearance surrounding the antenna so that: a) The component does not protrude beyond either surface of the carrier tape. b) The component can be removed from the cavity in a vertical direction without mechanical restriction after the top cover tape has been removed. c) Rotation of the component is limited to 20 maximum. d) Lateral movement of the component is restricted to 0.5mm maximum. Antennas for Wireless M2M Applications 17 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 14-3 Reel dimensions All dimensions in mm A B C D W1 W2 330 (max) 1.5 (min) 13.00.5 20.2 (min) 8.40 +1.5 14.4 (max) Leading Space Trailing Space Quantity 10000 pcs / reel 16 blank antenna holders 24 blank antenna holders Antennas for Wireless M2M Applications 18 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 14-4 Box dimensions Width W Breadth B Thickness H 340 mm 350 mm 47 mm 14-5 Bag properties Reels are supplied in protective plastic packaging. 14-6 Reel label information Antenova Limited Antenova Asia Ltd 4F, No 324, Sec 1 Nei-Hu Road Nei-Hu District, Taipei 11493, Taiwan ROC info@antenova.com / www.antenova-m2m.com 60.00 mm Description: Weii Part number: SRCW004 Quantity: 10,000 pieces Date Code: Manufacturer's code number: ceriiANT(R) 90.00 mm Antennas for Wireless M2M Applications 19 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 www.antenova-m2m.com Corporate Headquarters North America Headquarters Asia Headquarters Antenova Ltd. nd 2 Floor, Titan House 3 Bishop Square Hatfield AL10 9NA Antenova Ltd. 100 Brush Creek Road, Suite 103 Santa Rosa California, 95404 USA Antenova Asia Ltd. 4F, No. 324, Sec. 1, Nei-Hu Road Nei-Hu District Taipei 11493 Taiwan, ROC Tel: +44 1223 810600 Email: sales@antenova-m2m.com Tel: +1 707 890 5202 Email: sales@antenova-m2m.com Tel: +886 (0) 2 8797 8630 Fax: +886 (0) 2 8797 6890 Email: sales@antenova-m2m.com (R) (R) (R) Copyright Antenova Ltd. All Rights Reserved. Antenova , Antenova M2M , the Antenova product family names, and the Antenova and Antenova M2M logos are trademarks and/or registered trademarks of Antenova Ltd. Any other names and/or trademarks belong to their respective companies. The materials provided herein are believed to be reliable and correct at the time of print. Antenova does not warrant the accuracy or completeness of the information, text, graphics or other items contained within these information. Antenova further assumes no responsibility for the use of this information, and all such information shall be entirely at the user's risk. Antennas for Wireless M2M Applications 20 Product Specification DS-SRCW004 -1.1 revised 5 November 2015 Release Date 20 May 2015