FERROVIAIRE INDUSTRIE RAILWAY INDUSTRIAL Edition 03/11 Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS SOMMAIRE TABLE OF CONTENTS MODULES A JONCTION RAPIDE 1777 4 Presentation Caracteristiques techniques Systeme de reference Identification des modules Contacts males Obturateurs d'etancheite Outils Rail metallique Rail composite Reperes modules Modules etanches Modules Porte Composants Prolongateurs etanches 5 6 7 7 8 8 9 10 11 12 13 -14 15 16 Referentiel CONNECTEUR RECTANGULAIRE 1977 Presentation Caracteristiques techniques Systeme de reference Arrangements Accouplement - Detrompage Detrompeurs d'accouplement - Percages panneau Accessoires Contacts Outils Part number table 18 1977 RECTANGULAR CONNECTOR 29 30 CONNECTEURS SIM Presentation Technical data Part number system Modules identification Pin contacts Seal plugs Tools Metallic rail Composite rail Modules identifications Sealed modules Component carrier modules Sealed splices 17 19 20 21 22-23 24 25 26 27 28 Referentiel 1777 QUICK JUNCTION MODULES 32 33 34 35 36 37-38 39 40 41 42 43-44 45 46 47 47 Presentation Technical data Part number system Layouts Coupling - Polarizing Mating polarizer - Panel cutout Accessories Contacts Tools Part number table SIM CONNECTORS 48 COMPOSITE SIM CONNECTORS Presentation Description Technical data Mating Part number system 4 modules composite connector synoptic 2 modules composite connector synoptic Composite receptacles Composite clicker nut plugs Composite accessories Covers and chimneys 4 modules Covers and chimneys 2 modules Coupling polarization Shells polarization Polarization and locking instructions Referentiel 49 Part number table SIM SPLICE Presentation Caracteristiques techniques Systeme de reference SIM splice version standard SIM splice avec serre-cables SIM splice avec collerette SIM splice avec serre-cables et collerette 50 51 52 52 53 53 54 54 54 SIM SPLICE Presentation Technical data Part number system SIM splice standard version SIM splice with cables clamp SIM splice with flange SIM splice with cables clamp and flange CONNECTEURS SIM COMPOSITE Presentation Nomenclature Caracteristiques techniques Accouplement Systeme de reference Synoptique du connecteur composite 4 modules Synoptique du connecteur composite 2 modules Embases composites Fiches clicker nut composite Accessoires composite Capots et cheminees 4 modules Capots et cheminees 2 modules Detrompage a l'accouplement Detrompage sur boitiers Procedure de polarisation de verrouillage Referentiel 1 Part number table SOMMAIRE TABLE OF CONTENTS MODULES ET CONTACTS POUR CONNECTEURS SIM 56 MODULES AND CONTACTS FOR SIM CONNECTORS Caracteristiques techniques 57 Technical data Systeme de reference 57 Part number system Arrangements pour Connecteurs SIM et SIM Splice 58 Layouts for SIM Connectors and SIM Splice Contacts a sertir 58 Crimpable contacts Outils pour contacts 59 Tools for contacts Referentiel 60 Part number table OUTILS CONNECTEURS SIM 61 SIM CONNECTORS TOOLS REFERENTIEL CONNECTEURS SIM 62-63 SOCLES POUR RELAIS A LANGUETTES 64 SIM CONNECTORS PART NUMBER TABLE FASTON TYPE RELAY SOCKETS Presentation 65 Presentation Caracteristiques techniques 66 Technical data Principe des colonnettes orientables 67 Directional polarizing posts principle Montage 68 Mounting Percage platines 69 Plates drilling Accessoires de montage 69 Mounting accessories Socles pour relais 70-73 Relay sockets Blocs ecreteurs 74 Clamping carrier blocks Accessoires 74 Accessories Adaptateur hermetique pour relais 4 RT 75 Sealed adapter for 4 RT relay Referentiel 76 Part number table SOCLES POUR RELAIS : CONTACTS A SOUDER/PIQUER SUR CI 78 RELAY SOCKETS : SOLDER CUP/PCB PINS CONTACTS Caracteristiques techniques 79 Technical data Systeme de reference 79 Part number system Plans de percage 80 Drilling plans Socles pour relais 81-90 Relay sockets Referentiel 91 ACCESSOIRES DE CABLAGE - COLLIERS SERRE CABLES 92 Part number table CABLE ACCESSORIES - CABLES CLAMPS Presentation 93 Presentation Nomenclature 93 Description Caracteristiques techniques 93 Technical data Colliers serre-cables 94 Cables clamps PROCEDURE DE CABLAGE POUR CONTACTS A SERTIR 96-97 WIRING INSTRUCTIONS FOR CRIMP CONTACTS REFERENTIEL GENERAL 98-102 GENERAL PART NUMBER TABLE 2 3 MODULES A JONCTION RAPIDE 1777 1777 QUICK JUNCTION MODULES Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 4 PRESENTATION PRESENTATION Les modules type 1770 sont actuellement les plus perfectionnes dans le domaine des systemes de raccordements electriques a jonctions rapides etanches. En barrettes, ils offrent des connexions modulaires a tres haute densite de cablage, des performances tres elevees et une mise en oeuvre rapide et aisee. 1770 type terminal junction modules represent the highest level of technical development in the field of electrical connection using fast sealed terminals . On rails, they provide modular connections with high density fast sealed terminations, with excellent performance and the easiest of installation methods . Ils se montent par insertion et se demontent par extraction sans outil special, en partie ou sur toute la longueur d'un rail metallique dissymetrique muni d'un ressort ou d'un rail composite qui assure le verrouillage de chaque module. A chaque instant, il est possible de changer un module sans intervenir sur ses voisins. Modules can be mounted by insertion-extraction and can be demounted by extraction without any special tool, independantly at any point on asymmetric metallic rail provided with a spring or a composite rail which locks each module in place . At any time a module can be changed without demounting the adjacent modules . Tous les modules sont au pas de 14 mm. Ils conviennent a des contacts a sertir normalises tailles 20-16-12-10 pour des sections de cables de 0,25 a 6 mm. - Modules derive de la norme UTE NF C93-462 - Contacts males P a sertir derives des normes NF L53-105, EN 3155-016 a montage et demontage rapides avec des outils normalises. - Supports metalliques ou composites. - Grande variete de schemas electriques - Modules de masse, a diodes inserees, heterogenes et a piquer sur CI - Module de masse sur rail metallique. - Modules de mise a la terre. - Blocs de jonction de puissance munis de bornes a tige M3 ou M5. - Large gamme de modules porte-composants electroniques (type 1765) - Tenue aux fluides et aux vibrations. All modules have the same pitch of .551 inch . They comply with standard crimping contacts sizes 20-16-12-10, cables sections from 0,25 to 6 mm2 . - Modules conform to the Standard UTE NF C 93462 - Crimped pin contacts P derived from the Standard NF L 53105-A, EN 3155- 016 with fast mounting and demounting with standard tools. - Metallic or Composite rails - Large range of electricals bussing layouts. - Grounding modules, with diodes inserted, heterogeneous on PCB mounted. - Grounded modules onto metallic rail. - Earth modules. - Power junctions blocks fitted with M3 and M5 stud terminals. - Large range of electronic component carrier modules (type 1765) - Resistant to fluids and vibration. 5 CARACTERISTIQUES TECHNIQUES TECHNICAL DATA MECANIQUE MECHANICAL Module Matiere : Thermoplastique noir Exigence 2 NFF 16-102 Joint Matiere : Elastomere fluore Contact Matiere : Alliage cuivreux Protection : Nickel Rail composite : Thermoplastique noir I3 F2 - Exigence 2 Endurance : 500 cycles complets de verrouillage et deverrouillage Vibrations : Sinusoidales frequence de 10 a 2000 Hz acceleration 20 g. 12 cycles, discontinuite 1 s Chocs : 100 g 1/2 sinus, 6 ms (3 chocs dans 3 directions) Retention contacts : taille 20 : 9 daN taille 16 : 11 daN taille 12 : 11 daN taille 10 : 11 daN Module Material : Black thermoplastic NFF 16-102 Exigence 2 Grommet Material : Fluorinated elastomer Contact Material : Copper alloy Plating : Nickel Composite rail : Black thermoplastic I3 F2 - Exigence 2 Endurance : 500 complete cycles of locking and unlocking Vibration : Sinusoidal frequency from 10 to 2000 Hz acceleration 20 g. 12 cycles, discontinuity 1 s Shock : 100 g 1/2 sinus, 6 ms (3 shocks in 3 directions) Contact retention : size 20 : 9 daN size 16 : 11 daN size 12 : 11 daN size 10 : 11 daN RESISTANCE AUX FLUIDES Tenue : Conforme normes UTE C 93-462 RESISTANCE TO FLUIDS Resistance : Complies with UTE C 93-462 standard Etancheite : IP 66 avec O de cable approprie Sealing : IP 66 with appropriate cable diameter CLIMATIQUE CLIMATE ELECTRIQUE ELECTRICAL Temperature d'utilisation : -55C a +175C Chaleur humide : Resistance d'isolement a 100 M Tension de tenue au niveau de la mer 12 000 metres Resistance d'isolement Operating temperature : -55C to +175C Damp heat : Insulation resistance to 100 M : 2 000 V eff. 50 Hz (Modules 1777 #20-16-12) : 1 500 V eff. 50 Hz (Modules #20-16-12) : 1 000 V eff. 50 Hz : a 5 000 M Taille Size 20 16 12 10 Withstanding voltage at sea level 12 000 meters Insulation resistance Resistance contacts max Contact resistance (UTE C93-462) 4m 3m 3m >5m 6 : 2 000 V RMS 50 Hz (Modules 1777 #20-16-12) : 1 500 V RMS 50 Hz (Modules #20-16-12) : 1 000 V RMS 50 Hz : to 5 000 M Intensite maxi contact Contact current capacity 7,5 A 13 A 23 A 50 A SYSTEME DE REFERENCE PART NUMBER SYSTEM REFERENCE / PART NUMBER : 00 1777 CONTACTS / CONTACTS Taille 20 / Size 20 Taille 16 / Size 16 Taille 12 / Size 12 Modules heterogenes / Mixed modules 04 k kk 2 3 4 5-6 ARRANGEMENTS DES SHUNTS / SHUNTS ARRANGEMENTS 01 02 03 - etc... Protection or des contacts et shunts / Gold plated contacts and shunts IDENTIFICATION DES MODULES MODULES IDENTIFICATION Joint d'etancheite Sealing grommet REFERENCE PART NUMBER 001777 201 04 A.Air LB 06 - 25 PERIODE DE FABRICATION MANUFACTURING PERIOD Joint d'etancheite : BLEU Sealing grommet : BLUE 7 kk - kk Semaine / Week Annee / Year CONTACTS MALES PIN CONTACTS Les contacts males P sont du type a sertir, en alliage de cuivre nickele, derives des normes NF L53-105, EN 3155-016. The crimp male contacts P , are made of copper-nickel alloy and are derived from NF L53-105, EN 3155-016 standards. B B C C A A CONTACT SERTISSAGE CRIMPING CABLE Taille Size Reference Part number A B C max max max mm mm mm inch inch inch 20 001104 200 04 7,20 4,70 1,98 .283 .185 .077 16 001104 300 04 9,95 7,20 2,62 .391 .283 .103 12 001104 400 04 10,90 7,20 3,84 .429 .283 .151 2,5 2,30 - 3,70 .090 - .145 10 001104 620 04 12,6 8,8 5,3 .496 .346 .208 6 2,4 - 5,2 Section mm 0,75 a/to 0,25 1 a/to 0,5 O sur gaine mm dia on sheath inch Outil Tool OUTIL PLASTIQUE PLASTIC TOOL Positionneur Locator 1,20 - 2,00 .047 - .078 1,80 - 2,62 .070 - .103 M22520/1-01 M22520/1-02 Insertion Extraction Norme Standard 001112 200 25 NF L54-131-20 MIL-I-81969/14-11 001112 300 25 MIL-I-81969/14-03 001112 400 25 MIL-I-81969/14-04 M 300 BT TP986 001112 600 25 MIL-I-81969/14-05 OBTURATEURS D'ETANCHEITE SEAL PLUGS 1 They ensure sealing of the junction cavities which are not used (Supplied in bags of 100 or 500). 1 Ils assurent l'etancheite dans le cas de non utilisation de cavites de jonction (Conditionnes par 100 et 500). 1 8 Taille Size Couleur Colour P.T.F.E. (-55C a/to +175C) Masse Weight g 20 Rouge / Red 001109 200 42 5 16 Bleu / Blue 001109 300 40 12 12 Jaune / Yellow 001109 400 41 28 10 Gris / Grey 001109 600 00 57 OUTILS TOOLS OUTILS PLASTIQUES PLASTIC TOOLS Taille Size Insertion Rouge Red Bleu Blue Jaune Yellow Gris Grey 20 16 12 Extraction blanc Extraction white Insertion couleur Insertion colour 10 OUTILS METALLIQUES 20 16 12 Reference Part number 001112 200 25 001112 300 25 Blanc White 001112 400 25 001112 600 25 METALLIC TOOLS C Pinces coudees Angled pliers D Pinces droites Straight pliers Taille Size Extraction D1 Repere couleur Colour identification D2 Repere blanc White identification Outil Tool Couleur Colour D Insert. Rouge / Red Extract. Repere couleur Colour identification C1 Repere blanc White identification C2 POCHETTE / POCKET OUTIL UNITAIRE / UNIT TOOL Droit / Straight Coude / Angled 1 001136 201 60 001131 201 60 Blanc / White 2 001136 202 60 001132 202 60 Insert. Bleu / Blue 1 001136 301 60 001131 301 60 Extract. Blanc / White 2 001136 302 60 001132 302 60 Insert. Jaune / Yellow 1 001136 401 60 001131 401 60 Extract. Blanc / White 2 001136 402 60 001132 402 60 D1 + D2 C1 + C2 001100 232 00 001100 230 00 001100 332 00 001100 330 00 001100 432 00 001100 430 00 PRISE DE TEST TEST PLUG Nylon et laiton dore Nylon and gold plated brass Outil obligatoire pour garantir le test sans destruction. Mandatory tool to guarantee non-destructive test Taille Size 20 O O mm (inch) 1,95 (.076) Couleur Colour Rouge Red Bleu 16 2,61 (.102) Blue 12 3,84 (.151) Jaune Yellow 9 Reference Part number 001111 200 02 001111 300 02 001111 400 02 RAIL METALLIQUE METALLIC RAIL 1 INSERTION : Engager le bossage a du module face a l'empreinte a1 du rail. Exercer une pression sur le module jusqu'au declic de verrouillage provoque par le ressort c du support. 1 INSERTION : Insert the protruding part a of the module, facing the rail recess a1 . Exert sufficient pressure on the module to click the locking spring c mechanism. 2 EXTRACTION : Cote repere module, positionner une lame de tournevis (5 mm maxi) entre la partie saillante du support et le module, puis exercer une legere pression jusqu'au desencliquetage du module. 2 EXTRACTION : Place the screwdriver blade (5 mm maxi) between the protruding part of the support and the module on the identification side, then exert a light pressure until the release of the module. 1 2 Bossage a Protruding part a Empreinte a1 Rail recess a1 Ressort c Spring c 11 (.433) 13 (.511) 14 (.551) 25 (.984) 14 (.551) 14 (.551) 14 (.551) c 35 10 (.393) (1.377) O4 (.157 dia) 16 (.629) O 4 (.157 dia) 7,5 x 4,2 (.295 x .165) A A A vis / screw : O 10 maxi (.393 dia max) Tete de vis Screw head 4 mm maxi (.157 max) B Taille modules Size modules # 20 # 16 # 12 B mm 26,0 31,5 31,5 (inch) (1.023) (1.240) (1.240) Nbr de modules Nbr of modules 3 4 5 6 7 8 9 A mm 42 56 70 84 98 112 126 (inch) (1.653) (2.204) (2.755) (3.307) (3.858) (4.409) (4.960) Masse Weight g 14 19 23,3 28 33 38 42 et plus, jusqu'a 2 metres. / and more, up to 2 meters 001751 1 QQ QQ Nombre de modules / Number of modules 01 - 02 - 03 - etc... 10 00 : Oxydation anodique / Anodization 07 : Cadmie bichromate / Cadmium bichromate plating RAIL COMPOSITE COMPOSITE RAIL 1 INSERTION : Engager les bossages a et b du module face aux empreintes a1 et b1 du rail. Face au guide c exercer une pression sur le module jusqu'au declic de verrouillage. 1 INSERTION : Insert the protruding parts a and b of the module, facing the rail recess a1 and b1 . Face the guide c and exert pressure on the module until the lock is triggered. 2 EXTRACTION : Cote repere module, positionner une lame de tournevis (5 mm maxi) entre la languette du rail f et le module, puis exercer une pression jusqu'au desencliquetage du module. 2 EXTRACTION : On the module identification side, place a screwdriver blade (5 mm maximum) between the rail tong f and the module, then exert a light pressure until the release of the module. 1 Empreintes a1 et b1 Rail recess a1 and b1 Guide c Guide c 2 Bossages a et b Protruding part a and b Languette f Rail tab f Liaison entre 2 rails Link between 2 rails 13,2 (.519) 10 (.393) 14 7 (.275) (.551) 14 (.551) 14 (.551) 14 7 (.551) (.275) 12 (.472) 14,2 (.559) 12 (.472) 34 (1.338) 4,6 (.181) 12 (.472) O 4,2 (.165 dia) A 6 x 4,2 (.236 x .165) Couple de serrage : 0,10mdaN +0,30 -0 +0,30 Thightening torque : 0,10mdaN -0 Tete de vis Screw head 4 mm maxi (.157 max) vis / screw : O 10 maxi (.393 dia max) B Modules size # 20 # 16 # 12 B Taille modules mm 24,5 30 30 001751 6 QQ Nbr of modules 05 10 15 20 mm 70 140 210 280 (inch) (2.756) (5.511) (8.267) (11.023) Masse Weight g 9,5 19 28,5 38 00 Nombre de modules / Number of modules 05 - 10 - 15 et 20 (Fractionne sur demande / Divided on request) 11 A Nbr de modules (inch) (.964) (1.181) (1.181) 00 : Rail composite / Composite rail REPERES MODULES MODULES IDENTIFICATIONS REPERES MARKING TAGS Les reperes modules sont livres predecoupes en PLANCHES avec ou sans impression rouge sur fond blanc. Ils sont disponibles en 2 matieres : P.V.C. (-40C a +80C), P.T.F.E. (-40C a +200C). Modules identifications are supplied in precut blank sheets or printed red on white. They are available in 2 materials : P.V.C. (-40C to +80C), P.T.F.E. (-40C to +200C). REPERES UNITAIRES : UNIT IDENTIFICATIONS : Sans impression Blank 7 (.027) Avec impression Printed 2,8 (.011) 2,8 (.011) 122 7 (.027) Reference / Part number PVC : 001752 100 98 PTFE : 001752 500 98 Reference (ex) / Part number (ex) PVC : 001752 600 02 PTFE : 001752 004 21 REPERES EN PLANCHE : SHEET OF IDENTIFICATIONS : PLANCHE DE 720 REPERES / SHEET OF 720 IDENTIFICATIONS Amphenol Air LB 1 1 1 1 1 1 1 2 2 2 2 2 2 2 3 3 3 3 3 3 3 4 4 4 4 4 4 4 PLANCHE / SHEET Serie disponible Available series 720 vierge 720 blank 1 a 10 11 a 20 21 a 60 61 a 100 TB 5 5 5 5 5 5 5 6 6 6 6 6 6 6 7 7 7 7 7 7 7 8 8 8 8 8 8 8 9 9 9 9 9 9 9 10 10 10 10 10 10 10 1 1 1 1 1 1 1 REFERENCE PART NUMBER Nombre reperes Nbr. of idents P.V.C. P.T.F.E. 720 001752 100 98 001752 500 98 36 001752 600 02 001752 004 21 36 9 9 001752 700 02 001752 600 41 001752 600 03 001752 700 42 001752 005 17 001752 700 03 001752 005 25 360 001752 004 22 12 2 2 2 2 2 2 2 3 3 3 3 3 3 3 4 4 4 4 4 4 4 5 5 5 5 5 5 5 6 6 6 6 6 6 6 7 7 7 7 7 7 7 8 8 8 8 8 8 8 9 9 9 9 9 9 9 10 10 10 10 10 10 10 Exemples detailles par planche : Detailed examples per sheet : 36 n1, 36 n2, 36 n3 36 n4, jusqu'au n10 (up to n10) 9 n21, 9 n22, 9 n23 9 n24, jusqu'au n60 (up to n60) Autres impressions, merci de nous consulter. For other printing, please consult us. MODULES ETANCHES SEALED MODULES Taille 20 Size 20 01 2 777 001 04 18 Contacts (7,5 A) 001 04 10 Contacts (13 A) H 24,5 (.964) H 19 (.748) 34,5 max (1.358 maxi) 14 (.551) 01 3 777 Taille 16 Size 16 Reference Part number 34,5 34,5 (1.358) 14 14 (.551) 001777 201 04 Reference Part number 001777 301 04 001777 202 04 001777 302 04 001777 203 04 001777 303 04 001777 204 04 001777 304 04 001777 305 04 001777 205 04 001777 306 04 001777 206 04 001777 207 04 001777 208 04 001777 209 04 001777 211 04 001777 212 04 13 01 74 04 177 00 Taille 12 Size 12 Taille 20 a picots droits Size 20 to be solder on PCB 8 Contacts (23 A) 18 Contacts 001 001777 271 04 H 24,5 (.964) 71 2 777 04 0,6 (.023) H 19 (.748) 34,5 34,5 (1.358) Reference Part number 14 3,6 (.141) 001777 401 04 14 (.551) O1 (.039 dia) 001777 402 04 3,9 (.153) 001777 403 04 MODULES HETEROGENES 3,9 (.153) MIXED MODULES 34,5 (1.358) 14 (.551) 7 177 00 501 04 H max 14 8 Contacts 2 x #12 + 6 x #16 001777 501 04 H : 24,5 (.964) 16 Contacts 2 x #12 + 14 x #20 001777 503 04 H : 24,5 (.964) 6 Contacts 2 (1 x #12 + 2 x #16) 001777 504 04 H : 24,5 (.964) 12 Contacts 1 x #10 + 3 x #16 + 8 x #20 001777 601 04 H : 26,2 (1.031) MODULES PORTE COMPOSANTS COMPONENT CARRIER MODULES Les modules porte-composants electroniques constituent une evolution et completent la gamme des modules a jonctions rapides etanches. Comme le type 1777, ils se montent par encliquetage sur le meme rail, ils se juxtaposent aux modules et prennent la place de 2 modules (pas 28 mm). Ils sont constitues d'une partie connexion a jonctions rapides etanches pour contacts males P a sertir taille 20 et d'un boitier porte-composants. Les composants peuvent etre fixes a l'aide de plots a souder. Electronic component carrier modules represent a significant technical development and completes the quick junction modules range. Like the 1777 type module, they snap on the same rail side by side and take the space of two modules (1.102 in pitch). They consist of sealed quick junction connection for male crimp contacts P size 20 and a component carrier shell. Components may be mounted by means of solder pads. CARACTERISTIQUES TECHNIQUES TECHNICAL DATA MECANIQUE Module Matiere : Thermoplastique Joint Matiere : Elastomere fluore Contact Matiere : Alliage cuivreux Protection : Nickel Retention contacts : taille 20 : 9 daN MECHANICAL Module Material : Thermoplastic Grommet Material : Fluorinated elastomer Contact Material : Copper alloy Plating : Nickel Contact retention : size 20 : 9 daN CLIMATIQUE CLIMATIC ELECTRIQUE ELECTRICAL Temperature d'utilisation : -55C a +175C (hors composants) Operating temperature : -55C to +175C (component not included) Tension de tenue : taille 20 : 2 000 V eff. 50 Hz au niveau de la mer : taille 20 : 1 500 V eff. 50 Hz 12 000 metres : taille 20 : 1 000 V eff. 50 Hz Resistance d'isolement : a 5 000 M Resistance de contacts : taille 20 : 4 m Intensite maxi du contact : taille 20 : 7,5 A suivant schema Dielectric withstanding voltage : size 20 : 2 000 V RMS 50 Hz at sea level : size 20 : 1 500 V RMS 50 Hz 12 000 meters : size 20 : 1 000 V RMS 50 Hz Insulation resistance : to 5 000 M Contact resistance : size 20 : 4 m Maximum contact current rating : size 20 : 7,5A according to layout COMPOSANTS SOUDES SUR PLOTS COMPONENTS SOLDERED ON PADS Cote superieur Upper side Module entierement equipe, C.I. et tiroir inferieur 1 indemontables. montes Module completely equipped with lower drawer 1 locked in place. 16,5 (.649) Capot boitier composants Shell cover components 22,5 (.886) 10,5 17 (.413) (.669) Liaison electrique Electrical connection C.I. 24 (.944) 34,5 (1.358) Pas : 28 (Pitch : 1.102) 1 Circuit imprime C.I. / Printed Circuit Board PCB 2 plots / 2 pads Connexion / Connection a Entree / Input Sortie / Output Module / Module Ref. / PN Masse / Weight g. a 24 19,5 (.944) (.767) 3 3x2 3x2 001765 201 77 5,08 5,08 (.2) (.2) Composants non livres avec les modules. Pour d'autres arrangements, merci de nous consulter. Components are not supplied with the modules. For other layouts, please consult us. 15 17,0 PROLONGATEURS ETANCHES SEALED SPLICES 1 2 Contacts - tailles 20 et 16 Contacts - sizes 20 and 16 2 1 P Les prolongateurs Amphenol Air LB sont constitues de contacts femelles S positionnes a l'interieur d'un manchon en alliage cuivreux et d'un surmoulage en elastomere de silicone fluore. Ils beneficient de la meme technologie que les modules. Ils sont etanches et existent en 1 - 2 et 3 circuits. Amphenol Air LB splices consist of female contacts S positionned in a thermosetting resin and fluorinated silicone elastomer sleeve. The technology used is the same as for modules. They are sealed and are available in 1 - 2 and 3 circuits. These in-line junctions are suitable for male crimp contacts P which comply with NF L53-105, NAS 1749, and EN 3155-016 standards. Ces prolongateurs recoivent des contacts males a sertir P , conformes aux normes NF L53-105, NAS 1749 et EN 3155-016. PROLONGATEUR IN LINE JUNCTION OA L maxi A B C A C A B C B B A A B B A L maxi OA REFERENCE PART NUMBER 11 22 mm 20 20 29 1.200 12,5 .196 001119 203 04 16 16 37 1.456 001119 302 04 inch mm inch C A A B CONTACT Taille Size B Amphenol Air LB developpe egalement des modules a jonction rapide, qu'ils soient de masse, circulaires, a piquer sur C.I. ou a diode. Vous pouvez les retrouver dans la documentation "Modules a jonction rapide", completee par la gamme de prolongateurs. Amphenol Air LB also develop other modules such as quick connection modules, to be solder on P.C.B., circular, etc.. You will find the whole range of modules, with our range of splices in our "Quick junction modules" brochure. Pour toute demande, merci de nous consulter Feel free to contact us for further information. 16 REFERENTIEL PART NUMBER TABLE Ref. Air LB Air LB P/N Description Description 001100 232 00 001100 332 00 001100 432 00 001100 230 00 001100 330 00 001100 430 00 001104 200 04 001104 300 04 001104 400 04 001109 200 42 001109 300 40 001109 400 41 001109 600 00 001111 200 02 001111 300 02 001111 400 02 001112 200 25 001112 300 25 001112 400 25 001112 600 25 001119 203 04 001119 302 04 001131 201 60 001131 301 60 001131 401 60 001132 202 60 001132 302 60 001132 402 60 001136 301 60 001136 202 60 001136 301 60 001136 302 60 001136 401 60 001136 402 60 001751 1QQ QQ 001751 6QQ QQ 001752 100 98 001752 500 98 001765 201 77 001777 201 04 001777 202 04 001777 203 04 001777 204 04 001777 205 04 001777 206 04 001777 207 04 001777 208 04 001777 209 04 001777 211 04 001777 301 04 001777 302 04 001777 303 04 001777 304 04 001777 305 04 001777 306 04 001777 401 04 001777 402 04 001777 403 04 001777 501 04 001777 503 04 001777 504 04 001777 601 04 001777 271 04 pochette outils metalliques droits insert+extract #20 pochette outils metalliques droits insert+extract #16 pochette outils metalliques droits insert+extract #12 pochette outils metalliques coudes insert+extract #20 pochette outils metalliques coudes insert+extract #16 pochette outils metalliques coudes insert+extract #12 contact male #20 contact male #16 contact male #12 obturateur #20 obutrateur #16 obturateur #12 obturateur #10 prise de test #20 prise de test #16 prise de test #12 outil plastique insertion/extraction #20 outil plastique insertion/extraction #16 outil plastique insertion/extraction #12 outil plastique insertion/extraction #10 prolongateur #20 prolongateur #16 outil metallique coude insertion #20 outil metallique coude insertion #16 outil metallique coude insertion #12 outil metallique coude extraction #20 outil metallique coude extraction #16 outil metallique coude extraction #12 outil metallique droit insertion #20 outil metallique droit extraction #20 outil metallique droit insertion #16 outil metallique droit extraction #16 outil metallique droit insertion #12 outil metallique droit extraction #12 rail metallique rail composite planche etiquettes vierges PVC planche etiquettes vierges PFTE Module porte composants - contacts #20 module etanche #20 module etanche #20 module etanche #20 module etanche #20 module etanche #20 module etanche #20 module etanche #20 module etanche #20 module etanche #20 module etanche #20 module etanche #16 module etanche #16 module etanche #16 module etanche #16 module etanche #16 module etanche #16 module etanche #12 module etanche #12 module etanche #12 module etanche heterogene module etanche heterogene module etanche heterogene module etanche heterogene module etanche #20 a picots droits straight insert.+extract. metallic tool #20 in pocket straight insert.+extract. metallic tool #16 in pocket straight insert.+extract. metallic tool #12 in pocket angled insert.+extract. metallic tool #20 in pocket angled insert.+extract. metallic tool #16 in pocket angled insert.+extract. metallic tool #12 in pocket pin contact #20 pin contact #16 pin contact #12 sealing plug #20 sealing plug #16 sealing plug #12 sealing plug #10 test plug #20 test plug #16 test plug #12 insertion/extraction plastic tool #20 insertion/extraction plastic tool #16 insertion/extraction plastic tool #12 insertion/extraction plastic tool #10 splice #20 splice #16 angled insertion metallic tool #20 angled insertion metallic tool #16 angled insertion metallic tool #12 angled extraction metallic tool #20 angled extraction metallic tool #16 angled extraction metallic tool #12 straight insertion metallic tool #20 straight extraction metallic tool #20 straight insertion metallic tool #16 straight extraction metallic tool #16 straight insertion metallic tool #12 straight extraction metallic tool #12 metallic rail composite rail blank sheet of tags in PVC blank sheet of tags in PFTE Component carrier module - contacts #20 sealed module #20 sealed module #20 sealed module #20 sealed module #20 sealed module #20 sealed module #20 sealed module #20 sealed module #20 sealed module #20 sealed module #20 sealed module #16 sealed module #16 sealed module #16 sealed module #16 sealed module #16 sealed module #16 sealed module #12 sealed module #12 sealed module #12 sealed mixed module sealed mixed module sealed mixed module sealed mixed module sealed module #20 to be solder on PCB 17 Masse Weight g 0,15 0,32 0,65 5,0 12,0 28,0 57,0 2,0 2,7 3,6 5,4 1,5 2,7 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 8,5 18,0 18,0 18,0 18,0 18,0 18,0 19,0 19,0 19,0 19,0 17,0 19,0 19,0 Page 9 9 9 9 9 9 8 8 8 8 8 8 8 9 9 9 9 9 9 9 16 16 9 9 9 9 9 9 9 9 9 9 9 9 10 11 12 12 15 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 13 14 14 14 14 14 14 14 14 CONNECTEUR RECTANGULAIRE 1977 1977 RECTANGULAR CONNECTOR Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 18 PRESENTATION PRESENTATION Les connecteurs Amphenol Air LB de la serie 1977 sont issus de Derived form NF F 61-030 standard, Amphenol Air LB connectors, la norme NF F 61-030 et repondent aux exigences de la norme Series 1977, meet the requirements of AECMA EN 3545 standard. AECMA EN3545. Of a compact nature, 1977 connectors are made of thermoplastic. Les connecteurs 1977 sont compacts, relises en thermoplastique. They are availlable in versions sealed grommets. Ils sont disponibles en version passe-fils etanches. The connected assembly is made up of one male connector with P L'ensemble connecte est compose d'un connecteur male equipe de male contacts and one female connector with contacts males P et d'un connecteur femelle equipe de contacts that are fully EN-3155 compliant. S female contacts femelles S conformes a la norme EN-3155. Polarizers and hexagon head screws F1 and M1 ensure the couL'accouplement des connecteurs est assure par des detrompeurs pling of connectors, allowing up to 36 configurations. The coupling permettant jusqu'a 36 versions, et par des vis a tete hexagonale torque is from 0,06 to 0,10 mdaN. F1 et M1. Un couple de serrage de 0,06 a 0,10 mdaN permet l'accouplement. Serre-cables Cable clamps Detrompeur femelle Female polarizer F2 Contact femelle S Socket contact F1 Connecteur femelle Female connector a b O 7 (.275 dia) M1 1,6 max (.063 maxi) Connecteur male Male connector Detrompeur male M2 Male polarizer Contact Male Pin contact P Clip de retention Retention clip Les detrompeurs servent egalement a la fixation de l'embase (1,6 Polarizers are also used to fasten the base (maximum thickness mm d'epaisseur maxi) avec des ecrous fendus et des rondelles- .063 in) with split nuts and lockwashers. The coupling torque is freins. Le couple de serrage des detrompeurs se situe entre 0,125 between 0,125 and 0,150 mdaN. a 0,150 mdaN. 6 arrangements differents permettent de repondre aux differents In order to meet users needs, there are six variants. Complete cou- besoins des utilisateurs. L'etancheite a l'accouplement est assuree pling sealing is ensured by the interfacial compression of a gasket. par la compression interfaciale d'un joint. 19 CARACTERISTIQUES TECHNIQUES TECHNICAL DATA MECANIQUE MECHANICAL Boitier Matiere Joint Matiere Contact Matiere Protection : Thermoplastique noir exigence 3 NFF 16-102 : Elastomere fluore BLEU : Alliage cuivreux : Or sur nickel Shell Material Seal Material Contact Material Protection : Black thermoplastic exigence 3 NFF 16-102 : BLUE fluorinated elastomer : Copper alloy : Gold on nickel Vibrations Chocs : NF C 20 616 - Severite 2000-20 10 a 2 000 Hz - 20' 12 cycles NF C 20 608 - Severite 50 A : 50 g - 11 ms Vibration Shocks : NF C 20 616 - Severity 2000-20 10 to 2 000 Hz - 20' 12 cycles NF C 20 608 - Severity 50 A : 50 g - 11 ms Retention des contacts : dans l'isolant taille 20 taille 16 taille 12 taille 10 taille 8 : : : : : Contacts retention : in insulation 6 daN 11 daN 11 daN 11 daN 11 daN CLIMATIQUE size 20 size 16 size 12 size 10 size 8 : : : : : 6 daN 11 daN 11 daN 11 daN 11 daN CLIMATE Operating temperature : -55C to +150C continously Salt spray : 96 hours Temperature d'utilisation : -55C a +150C permanent Brouillard salin : 96 heures ETANCHEITE SEALING IP 66 avec O de cable approprie IP 66 with appropriate cable diameter ELECTRIQUE ELECTRICAL Tension d'epreuve : 250 V eff. 50 Hz Tension de service maxi : 1 500 V eff. 50 Hz Resistance d'isolement : a 5000 M sous 500 Vcc Resistance de contact : suivant EN3155-001 Chute de tension : suivant EN3155-001 Intensite maxi a 20C : taille 20 : 10 A taille 16 : 13 A taille 12 : 23 A taille 10 : 33 A taille 8 : 46 A : 250 V eff. 50 Hz : 1 500 V RMS 50 Hz : to 5000 M at 500 Vcc : conforming to EN3155-001 : conforming to EN3155-001 : size 20 : 10 A size 16 : 13 A size 12 : 23 A size 10 : 33 A size 8 : 46 A RESISTANCE AUX FLUIDES RESISTANCE TO FLUIDS Suivant : Rated voltage Withstanding voltage Insulation resistance Contact resistance Voltage drop Current-carrying capacity at 20 Conform to : UTE C 93-462 UTE C 93-462 CONNECTOR IDENTIFICATION IDENTIFICATION CONNECTEUR - marque : - periode de fabrication : - Make : - Manufacturing date : A.Air LB kk - kk annee semaine 20 year week A.Air LB kk - kk SYSTEME DE REFERENCE PART NUMBER SYSTEM REFERENCE PART NUMBER 00197k k k k 00 BOITIER Contacts a sertir SHELL Crimped contacts 7 ARRANGEMENT 50 contacts - taille 20 21 contacts - taille 16 13 contacts - taille 12 7 contacts - taille 10 5 contacts - taille 8 ARRANGEMENT 50 contacts - size 20 21 contacts - size 16 13 contacts - size 12 7 contacts - size 10 5 contacts - size 8 1 3 4 6 7 TYPE DE CONTACT contact femelle - connecteur femelle Contact male - connecteur male TYPE OF CONTACT Socket contact - female connector Pin contact - male connector 1 2 CODE EQUIPEMENT Connecteur livre sans detrompeur Connecteur livre avec detrompeurs males Connecteur livre avec detrompeurs femelles EQUIPMENT CODE Connector supplied without polarising posts Connector supplied with pin polarising posts Connector supplied with socket polarising posts 0 3 4 21 ARRANGEMENTS LAYOUTS Vue face avant femelle 01 Socket front face view 03 1 17 33 50 18 34 11 12 7 1 7 07 1 13 8 21 contacts - Taille 16 21 contacts - Size 16 50 contacts - Taille 20 50 contacts - Size 20 06 04 1 21 13 contacts - Taille 12 13 contacts - Size 12 EE DD CC BB AA 5 contacts - Taille 8 5 contacts - Size 8 7 contacts - Taille 10 7 contacts - Size 10 Connecteur pour contacts femelles Socket contacts connector 80 (3.150) 68 (2.677) 19 19 (.748) 12,5 (.492) H1 6,5 (.256) 14 (.551) 50 (1.968) H2 mm (inch) H1 mm (inch) Taille Size 22,5 (.885) 16 (.630) 20 - 16 - 12 28,5 (1.122) 22 (.866) 10 29,9 (1.177) 23 (.905) 8 22 H2 ARRANGEMENTS LAYOUTS Vue face avant male 01 Pin front face view 1 03 17 33 50 18 34 21 12 1 7 13 8 21 contacts - Taille 16 21 contacts - Size 16 50 contacts - Taille 20 50 contacts - Size 20 06 04 11 1 07 7 1 13 contacts - Taille 12 13 contacts - Size 12 AA BB CC DD EE 5 contacts - Taille 8 5 contacts - Size 8 7 contacts - Taille 10 7 contacts - Size 10 Connecteur pour contacts males Pin contacts connector 80 (3.150) 68 (2.677) 19 19 (.748) 12,5 (.492) H1 6,5 (.256) 14 (.551) 50 (1.968) H2 mm (inch) H1 mm (inch) Taille Size 22,5 (.885) 16 (.630) 20 - 16 - 12 28,5 (1.122) 22 (.866) 10 30,2 (1.188) 23 (.905) 8 23 H2 ACCOUPLEMENT - DETROMPAGE COUPLING - POLARIZING ACCOUPLEMENT DES CONNECTEURS CONNECTOR COUPLING L'accouplement des connecteurs equipes de contacts males et femelles est protege par un systeme de detrompage permettant 36 combinaisons. The coupling of connectors with male and female contacts is protected by a polarizing system allowing 36 combinations. CODE DE DETROMPAGE POLARIZING CODE Gauche Left Droite Right FEMALE connector Rear face view Connecteur FEMELLE Vue face arriere Position 1 .......................... Position 5 : Code 15 Gauche Left Polarisation fixe Fixed polarization Droite Right Connecteur MALE Vue face arriere MALE connector Rear face view Position 1 .......................... Position 5 : Code 15 DETROMPAGE CONNECTEURS MALES / FEMELLES PIN / SOCKET POLARIZING CONNECTORS Montage : Les detrompeurs clipsables se montent par l'arriere des boitiers. L'hexagone des detrompeurs est muni d'un repere de position P qui permet d'identifier le code de detrompage choisi. Assembly: Demontage : Les detrompeurs se demontent cote accouplement, par pression de l'outil extracteur. Clip-on polarizers are assembled through the rear of the shells. The position reference P on the hexagonal head of the polarizers identifies the selected polarizing code. Disassembly: Polarizers are disassembled from the mating side by pushing on the extracting tool. Outil extracteur Extracting tool P Detrompeur femelle Socket polarizer 2 1 Guide de detrompage Polarizing guide Detrompeur male Pin polarizer 1 INTERFACE 2 P Outil extracteur Extracting tool 24 DETROMPEURS D'ACCOUPLEMENT - PERCAGES PANNEAU MATING POLARIZER - PANEL CUTOUT DETROMPEUR MALE standard PIN POLARIZER M M a b Masse : 5,15 g 27,6 (1.086) P - Polarisation part number mark a - Fixing nut b - Onduflex washer c - Retention clip .2500-28 UNF 3A .1120-40 UNC 3B Reference de l'ensemble Fixation set P/N 001901 186 07 14,1 (.555) P - Repere de position de detrompage a - Ecrou de fixation b - Rondelle Onduflex c - Clip de retention c M4 P 8 sur plats (.314 on flats) P - Repere de position de detrompage a - Vis de fixation b - Rondelle Onduflex c - Clip de retention P - Polarisation part number mark a - Fixing screw b - Onduflex washer c - Retention clip SOCKET POLARIZER Reference de l'ensemble Fixation set P/N 001901 176 07 F 8 sur plats (.314 on flats) a b Masse : 3,4 g 15 (.590) F 18 (.708) DETROMPEUR FEMELLE 2,5 (.098) c O 6,35 (.250 dia) .1120-40 UNC 3A PERCAGE DE PANNEAU PANEL CUTOUT R : 1 mm maxi Epaisseur maxi : 1,6 mm R : .039 inch maxi thickness maxi : .063 inch 2 x O 7 +0,1 0 (2 x .275dia+.003 0 ) +.003 56,7 +0,1 0 (2.232 ) 0 2 x O 7 +0,1 0 (2 x .275dia+.003 0 ) +.003 56,7+0,1 0 (2.232 ) 0 2 x O 7 +0,1 0 (2 x .275 +.003 0 dia) R 68 0,1 (2.677 .003) Percage standard Standard cutout 68 0,1 (2.677 .003) Percage multiple Multiple cutout 14,5 0,1 (.570 .003) +.003 48,7 +0,1 0 (1.917 0 ) Pas = 14,2 (pitch = .559) +.003 15 +0,1 0 (.590 0 ) R 0 4,1 - 00,1 (.161-.003 ) 58,5 0,1 (2.303 .003) 68 0,1 (2.677 .003) Reference / P/N Percage pour boitier male a picots fixation sur panneau avec detrompeur Cutout for pin contact receptacle fixation on panel with polarizer 25 001900 081 00 ACCESSOIRES ACCESSORIES SERRE-CABLES CABLE CLAMP Matiere : Thermoplastique noir Montage : Positionner le serre-cables cote arriere, face aux rainures d'accrochage. Engager le serre-cables jusqu'a encliquetage sur le corps du connecteur. Material: Black thermoplastic Assembly : Place the back side of the cable-clamp facing the locking grooves. Engage the cable clamp until it locks on the connector. Disassembly : Separate and pull on each side of the cable clamp alternately Demontage :Ecarter et tirer l'un apres l'autre les cotes du serrecables. SERRE-CABLES DROIT Standard Standard STRAIGHT CABLE CLAMPS Taille 8 Size 8 Reference - Part number 001901 050 00 15 15 (.590) (.590) Reference - Part number 001901 052 00 19,6(.771) 19,6(.771) 6 (.236) 9,8 (.385) 9,8 (.385) 5 (.196) 37,5 (1.476) 5 (.196) 44 maxi (1.732) max 6 (.236) 3 (.118) 14 (.551) 5,5 maxi (.216) max 57,2 (2.251) 14 (.551) 57,2 (2.251) SERRE-CABLES COUDE Standard Standard ANGLED CABLE CLAMPS 001901 051 00 86 maxi (3.385) max 5 (.196) 2,75 (.108) 86 maxi (3.385) max 5 (.196) 5 (.196) 60 maxi (2.362) max 14 (.551) MANCHON D'ETANCHEITE 57,2 (2.251) SEALING SLEEVE 8,5 (.334) Reference - Part number 001901 040 00 O8,8 (.346) O9,3 (.366) 23 maxi (.905) max O6,5 (.255) O7,35 (.289) 2,75 (.108) 5 (.196) 12,5 (.492) 5,5 maxi (.216) max 20 (.787) 17 mini (.669) 1 (.039) 001901 053 00 (nous consulter / please contact us) 12,5 (.492) 57,2 (2.251) Reference - Part number Taille 8 Size 8 Reference - Part number O8,35 (.328) 26 67 maxi (2.362) max 14 (.551) 5,5 maxi (.216) max CONTACTS CONTACTS G G OD OD MALE PIN P Trou de controle Inspection hole 123 CONTACTS 001704 202 92 S 001714 202 92 P 001704 302 92 S 001714 302 92 P 001704 400 92 S 001714 400 92 P 001704 600 92 S 20 16 12 10 001714 600 92 P 001704 730 02 S 001714 730 02 P 001704 731 02 S 001714 731 02 P 001704 732 02 S 001714 732 02 P SERTISSAGE CRIMPING CABLE OD mm inch G mm inch 1,30 a 1,35 3,60 a 4,70 Reference Genre Taille Part number Type Size (.051 to .053) (.141 to .185) 1,84 a 1,87 5,31 a 5,82 (.072 to .073) (.209 to .229) 2,49 a 2,59 Section mm O sur gaine mm O on sheath inch 1 a 0,25 (.047 to .070) 1,5 a 0,75 5,31 a 5,82 3,40 a 3,56 1,20 a 1,80 9,02 a 9,78 (.133 to .140) (.355 to .385) 8 5,6 a 5,74 (.220 to .225) 8 9,02 a 9,78 4,48 a 4,62 (.176 to .181) (.355 to .385) 6 8 3,42 a 3,56 (.134 to .140) 4 1,80 a 2,62 M 22520/1-01 M 22520/1-04 M 81969/1-03 M 22520/7-01 M 22520/7-04 001112 320 25 M 22520/1-01 M 22520/1-04 M 22520/23-01 414 DA-10N 2,50 a 5,20 (.098 to .204) 3,42 - 5,1 (.134 - .200) 3,8 - 5,15 (.149 - .202) 3,1 - 5,2 (.122 - .204) 2 Montage avec contact male Assembly with a male contact DIE SET : Locator 4536 M 22520/23-01 WA23-296L M 22520/23-01 WA23-296L M 22520/23-01 M300BT 001112 220 25 M 81969/14-04 001112 400 25 M 81969/14-05 001112 600 25 M 81969 / 14-06 001112 700 25 M 81969 / 14-06 001112 700 25 M 81969 / 14-06 WA23-296L TP 1498 pos:3 001112 700 25 SEALING PLUG 2 Montage sans contact male Assembly without male contact M 81969/1-02 (.070 to .103) OBTURATEURS D'ETANCHEITE 1 Insertion - Extraction Positionneur Plastique Metallique Locator plastic metallic M 22520/2-08 (.090 to .145) 4 Pince a sertir Crimping tool OUTILLAGE TOOLING M 22520/2-01 2,30 a 3,70 2,5 (.098 to .102) (.209 to .229) FEMELLE S SOCKET 123 Joint Seal 1 Module Module Taille Size Couleur Colour PTFE (-55 a/to +175 C) 20 16 12 10 8 Rouge / Red Bleu / Blue Jaune / Yellow Vert / Green Gris / Gray 001109 210 42 001109 300 40 001109 400 41 001109 600 00 001109 705 49 (conditionnes par 100 et 500) (Lots of 100 and 500) 27 OUTILS TOOLS OUTIL EXTRACTEUR EXTRACTION TOOL Detrompeurs femelle Socket polarising posts F M Detrompeurs male Pin polarising posts REF. : P/N. 001901 003 90 REF. : 001901 P/N. 001 00 CLE DE SERRAGE DE L'ECROU FENDU MALE KEY FOR MATING PIN SPLIT NUT 1 (.039) O 11 40 (.433 dia) (1.574) Couple de serrage : 0,125 a 0,150 m.daN Torque : 0,125 to 0,150 m.daN CLE DE SERRAGE DU CONNECTEUR A L'ACCOUPLEMENT KEY FOR MATING OF CONNECTOR 2,35 mm (.092 inch) Tournevis hexagonal 2,35 mm sur plats Hexagonal screwdriver .092 inch across flats REF. : 002013 P/N. Couple de serrage : 0,06 a 0,10 m.daN Torque : 0,06 to 0,10 m.daN 28 000 61 REFERENTIEL PART NUMBER TABLE Ref. Air LB / Air LB P/N Description Description Masse Weight g Page 001109 210 42 obturateur taille 20 sealing plug size 20 5,0 27 001109 300 40 obturateur taille 16 sealing plug size 16 12,0 27 001109 400 41 obturateur taille 12 sealing plug size 12 28,0 27 57,0 27 001109 600 00 obturateur taille 10 sealing plug size 10 001704 202 92 contact femelle taille 20 socket contact size 20 27 001704 302 92 contact femelle taille 16 socket contact size 16 27 001704 400 92 contact femelle taille 12 socket contact size 12 27 001704 600 92 contact femelle taille 10 socket contact size 10 27 001714 202 92 contact male taille 20 pin contact size 20 27 001714 320 92 contact male taille 16 pin contact size 16 27 001714 400 92 contact male taille 12 pin contact size 12 27 001714 600 92 contact male taille 10 pin contact size 10 27 001901 001 00 cle de serrage de l'ecrou fendu male key for mating pin split nut 28 001901 040 00 manchon d'etancheite sealing sleeve 26 001901 050 00 serre-cables droit straight cable clamp 26 001901 051 00 serre-cables coude angled cable clamp 26 001901 052 00 serre-cables droit taille 8 straight cable clamp size 8 26 001901 053 00 serre-cables coude taille 8 angled cable clamp size 8 26 001901 176 07 detrompeur femelle socket polarizer 3,4 25 001901 186 07 detrompeur male pin polarizer 5,15 25 001901 kkk 00 outil extracteur extraction tool 28 002013 000 61 cle de serrage accouplement key for mating of connector 28 01977 21k 00 connecteur femelle taille 20 socket connector size 20 20,0 22 01977 22k 00 connecteur male taille 20 pin connector size 20 21,0 23 01977 31k 00 connecteur femelle taille 16 socket connector size 16 21,0 22 01977 32k 00 connecteur male taille 16 pin connector size 16 21,0 23 01977 41k 00 connecteur femelle taille 12 socket connector size 12 17,8 22 19,4 23 01977 42k 00 connecteur male taille 12 pin connector size 12 01977 61k 00 connecteur femelle taille 10 socket connector size 10 21,5 22 01977 62k 00 connecteur male taille 10 pin connector size 10 23,1 23 01977 71k 00 connecteur femelle taille 8 socket connector size 8 22 01977 72k 00 connecteur male taille 8 pin connector size 8 23 29 CONNECTEURS SIM SIM CONNECTORS Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 30 31 CONNECTEURS SIM COMPOSITE SIM COMPOSITE CONNECTORS Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 32 PRESENTATION PRESENTATION Le SIM (Systeme d'Interconnexion Modulaire) Amphenol Air LB est un connecteur modulaire rectangulaire multi-contacts, multifonctions, en composite durci. Repondant a la norme EN 4165. The Amphenol Air LB SIM (Modular Interconnection System) is a modular multicontact, multifunctional rectangular connector in shielded composite version. SIM connectors are qualified according to the EN 4165 spec. Il est constitue soit : - d'embases fixes juxtaposables - d'embases a collerette - d' une fiche clicker nut - de modules amovibles clipsables. It consists of: - standard or flange mount receptacles that can be assembled side by side on a panel, - clicker nut plug, - easy removable click-in modules. Deux types de boitier sont proposes pour 2 modules ou 4 modules Two shell types are available : 2 modules and 4 modules. There are two mating types: clicker nut and rack panel plug. Le predetrompage a l'accouplement de la fiche sur l'embase est assure mecaniquement par une vis a fixation dissymetrique. When mating the plug to the receptacle, polarization is mechanically ensured by an asymmetrical mounting screw. La vis d'accouplement integre un systeme de detrompage a 6 noix et 6 clefs permettant d'obtenir par rotations 36 combinaisons. The coupling screw includes a polarizing system with 6 nuts and 6 keys providing 36 keying combinations. 6 colour coded nuts and keys can also be used to increase polarizing options. Les performances d'attenuation sont de 65 dB pour 100 KHz et superieures a 30 dB pour 10 GHz. Provided attenuation of 80 dB at 100 KHz and better than 65 dB at 100 MHz. Les accessoires capots et serre-cables completent les connecteurs. Les modules sont en thermoplastique et elastomere silicone surmoule. Ils sont munis d'un systeme de detrompage et se decomposent en 2 types. - Module male pour contacts males P - Module femelle pour contacts femelles S Various covers and cable clamp accessories complete the connector. The modules are in thermoplastic and overmoulded silicone elastomer. The modules include a polarization system. There are two types of modules: - Pin module for pin contacts P - Socket module for socket contacts S Ils se montent par l'arriere des embases ou des fiches. Ils peuvent etre inseres manuellement dans les compartiments du boitier et extraits a l'aide de l' outil approprie (page 54). Modules are inserted from the back of the receptacle and /or plug. Modules are inserted manually in the shell compartment but are extracted with an appropriate tool (see page 54). Les modules recoivent des contacts males P et des contacts femelles S conformes a la norme MIL-C-39029/57-58 dans les tailles 22, 20, 16, 12. Ils disposent egalement de contacts a picots et de contacts speciaux, coaxiaux, optiques, etc... The contacts used with the modules may be male P or female S in compliance with MIL-C-39029/57-58 for size 22, 20, 16, 12, . There are also variants for wire wrap, pcb, and special contacts, coaxial, fiber optic, etc. L'insertion des contacts s'effectue par la face arriere en elastomere, l'etancheite sur le cable est assuree par 3 barrieres elastiques. Cote interface l'etancheite est assuree par le joint interfacial surmoule des modules males. Contacts are inserted through the rear elastomer surface. Inside each module are 3 elastic barriers to ensure a hermetic seal onto the cable. Le connecteur SIM est rigoureusement intermariable avec les connecteurs repondant a la norme EN 4165. On the interface side, sealing is ensured with pin overmolded modules interfacial seals. The SIM connector is strictly intermatable with connectors complying with standard EN 4165. 33 NOMENCLATURE DESCRIPTION 4 11 6 12 2 A B 5 A B 7 3 1 8 9 11 10 1 - Embase. 1 - Receptacle. 2 - Fiche. 2 - Plug. - Grounding fingers for grounding continuity (SIM 2D). 3 - Bague R.F.I. pour continuite de masse (SIM 2D). 3 4 - Axe de manoeuvre. 4 - Coupling screw. 5 - Detrompage a l'accouplement (36 combinaisons). 5 - Coupling polarization (36 positions). 6 - Modules thermoplastique et elastomere silicone. 6 - Thermoplastic and silicone elastomer modules. 7 - Etancheite interfaciale des modules par compression des 7 - Module interface sealing by means of chemney compression. 8 - Etancheite arriere sur chaque cable grace aux 9 cheminees. 8 barrieres d'etancheite. 9 - Rear sealing of each cable by means of barrier seals. - Module polarization position. Each cavity identified by Ref. A-B-C-D. - Position du reperage module. 10 - Male and female modules can be mixed. Chaque cavite reperee A-B-C-D . 11 - Cabling accessories mounted on receptacle and plug. 10 - Panachage des modules males ou femelles. - Cable clamps 11 - Accessoires de cablage montes cote embase et cote fiche. - Shielded cover - Serre-cables - Flat cable clamps - Capot durci - Shunt cover - Serre-nappes - Sheath cable clamps - Capot shunt - Contacts alignment cover - Capot pour realignement des contacts - Adjustable cable clamps - Serre-cables orientables - etc... - etc... 12 12 - Joint d'etancheite peripherique sur les modules. 34 - Peripheral sealing. CARACTERISTIQUES TECHNIQUES TECHNICAL DATA MECANIQUE MECHANICAL Boitier Shell Matiere : Thermoplastique exigence 2 Protection : Nickele brillant Module Matiere : Thermoplastique exigence 2 et elastomere silicone Joint Matiere : Elastomere conducteur ou non Contact Matiere : Alliage cuivreux Protection : Or sur nickel Endurance : 500 cycles complets de verrouillage et deverrouillage Vibrations : Sinusoidales frequence de 5 a 3000 Hz acceleration 20 gn Chocs : 1 choc par direction de chaque axe, forme demi sinusoidale, amplitude 100 gn duree 10ms Retention Modules : dans boitier 25,4 daN Contacts : dans modules : taille 20 : 8,9 daN taille 16 : 11 daN taille 12 : 13 daN taille 8 : 15,6 daN CLIMATIQUE Temperature d'utilisation : -55C a +175C Chaleur humide : 56 jours a 95 % HR Brouillard salin : 500 heures ELECTRIQUE Material : Thermoplastique exigence 2 Protection : Bright nickel plated Module Material : Thermoplastique exigence 2 and silicone elastomer Seal Material : Elastomer, conductive or not Contact Material : Copper alloy Protection : Gold on nickel Durability : Over 500 full mating and unmating cycles Vibrations : Sinusoidal frequency from 10 to 2000 Hz acceleration 20 gn Shocks : 1 shock per direction of each axis, half-sinusoidal form, amplitude 100 gn duration 10 ms Retention Modules : in shell 25,4 daN Contacts : in modules : size 20 size 16 size 12 size 8 : 8,9 daN : 11 daN : 13 daN : 15,6 daN CLIMATE Operating temperature : -55C to +175C Damp heat : 56 days at 95 % HR Salt spray : 500 hours ELECTRICAL Tension de tenue au niveau de la mer : 1800 V eff. 50 Hz (taille 20, 16, 12, 8) Dielectric withstanding at sea level : 1800 VRMS, 50 Hz (size 20, 16, 12, 8) Resistance d'isolement : Insulation resistance : a 5000 M to 5000 M Resistance d'isolement max en altitude : 1000 M Maxi Insulation resistance in altitude : 1000 M Intensite max. contact : Contact max. current : size 20 size 16 size 12 size 8 taille 20 taille 16 taille 12 taille 8 : 7,5 A : 13 A : 23 A : 46 A : 7,5 A : 13 A : 23 A : 46 A ETANCHEITE SEALING IP 66 avec O de cable approprie IP 66 with appropriated cable diameter Interalveole Traversee : Suivant EN 2591 Essai 324 pression 1,1 k Pa Intercavity : according to EN 2591 Test 324 pressure 1,1 k Pa : Fuite a 4 cm3/h sous une pression differencielle de 1 bar par module Crossing : A leak to 4 cm3/h under differential pressure of 1 bar by module Interfaciale : Suivant EN 2591 Essai 314 pression 1,1 k Pa Interfacial 35 : according to EN 2591 Test 314 pressure 1,1 k Pa ACCOUPLEMENT MATING Dimensions des connecteurs verrouillEs et dEverrouillEs. Standard ou durcis. Dimension of locked and unlocked connectors Standard or hardened 42,2 max (1.661 maxi) 33,4 max (1.315 maxi) 54,9 max (2.161 maxi) 46,1 max (1.815 maxi) VERROUILLE LOCKED DEVERROUILLE UNLOCKED Couple de serrage 1 Nm a 1,7 Nm max. Coupling torque 1 Nm to 1,7 Nm max. 36 SYSTEME DE REFERENCE PART NUMBER SYSTEM BOITIERS SHELLS SIM 2 Connecteur SErie II Series II connector Boitier composite standard Boitier composite durci Composite standard shell Composite shielded shell S B Boitier 4 modules Boitier 2 modules Fiche clicker nut Embase standard Embase courte Embase a collerette Embase a collerette courte 4 module shell 2 module shell 8 4 Clicker nut plug Standard receptacle Short receptacle Flanged receptacle Short flanged receptacle 0 2 3 4 5 Nickele brillant Bright nickel plated K OPTIONS : OPTIONS : Livre sans noix ou cle de detrompage Delivered without polarizing nut or key Livre avec noix ou cle de detrompage - Code violet - Code jaune - Code vert - Code bleu - Code orange - Code blanc - Standard Delivered with polarizing nut or key - Purple code - Yellow code - Green code - Blue code - Orange code - White code - Standard Position de la noix ou cle de detrompage - Position 1 - Position 2 - Position 3 - Position 4 - Position 5 - Position 6 - non montee Nut or key position - Position 1 - Position 2 - Position 3 - Position 4 - Position 5 - Position 6 - no mounting Rien/Nothing A B C D E F G 1 2 3 4 5 6 Rien / Nothing 37 k k k K k k ACCESSOIRES COMPOSITES STANDARD STANDARD COMPOSITE ACCESSORIES Accessoire composite standard Standard composite accessory Capot de protection composants Serre-cables orientables Serre-cables monoblocs (1) Component protection cover Adjustable cable clamps Monobloc cable clamps (1) 1 2 8 Accessoire 2 modules Accessoire 4 modules 2 module accessory 4 module accessory 2 4 Nickele brillant Thermoplastique noir Bright nickel plated Black thermoplastic 020 303 (1) (1) 2 modules nous consulter 3351 60 k k 3351 60 k k kkk 2 modules contact us ACCESSOIRES COMPOSITES DURCIS SHIELDED COMPOSITE ACCESSORIES Accessoire composite durci Hardened composite accessory Capot de fiche clicker nut Capot d'embase Cliker nut plug cover Receptacle cover 6 7 Accessoire 2 modules Accessoire 4 modules 2 module accessory 4 module accessory 2 4 Nickele brillant Bright nickel plated CHEMINEES AMOVIBLES 020 REMOVABLE CHIMNEYS Cheminees Chimneys Cheminee cylindrique Cheminee ovale Obturateur Cylindrical chimneys Oval chimneys Obturator 051 052 053 Nickele brillant Bright nickeled plated 18 38 006114 kkk 18 020 SYNOPTIQUE DU CONNECTEUR COMPOSITE 4 MODULES 4 MODULES COMPOSITE CONNECTOR SYNOPTIC Serre-cables orientables Adjustable cable clamps Serre-cables monobloc Monoblock cable clamps 3351 6084 303 3351 6024 kkk a a Capot de protection composants Component protection cover Capot de fiche durci Shielded plug cover 3351 6014 kkk 3351 6064 kkk Fiche clicker nut Clicker nut plug S P femelle socket male pin S P femelle socket male pin SIM 2 B 80 k SIM 2 S 80 k Embase Receptacle Embase a collerette Flanged receptacle SIM 2 B 82 k SIM 2 S 82 k SIM 2 B 84 k SIM 2 S 84 k Embase courte Short receptacle Embase courte a collerette Short Flanged receptacle SIM 2 B 85 k SIM 2 S 85 k SIM 2 B 83 k SIM 2 S 83 k Capot de protection composants Component protection cover Capot d'embase durci Shielded receptacle cover 3351 6014 kkk 3351 6074 kkk a a Serre-cables orientables Adjustable cable clamps Serre-cables monobloc Monoblock cable clamps 3351 6024 kkk 3351 6084 303 k Les terminaisons des references sont definies page 37 et 38. k Part number endings, pages 37 and 38. 39 SYNOPTIQUE DU CONNECTEUR COMPOSITE 2 MODULES 2 MODULES COMPOSITE CONNECTOR SYNOPTIC Capot de fiche durci Shielded plug cover Serre-cables orientables Adjustable cable clamps 3351 6062 kkk Capot de protection composants Component protection cover 3351 6022 kkk a 3351 6012 kkk a Fiche clicker nut Clicker nut plug SIM 2 B 40 k SIM 2 S 40 k S P femelle socket male pin S P femelle socket male pin Embase Receptacle Embase a collerette Flanged receptacle Embase courte Short receptacle Embase courte a collerette Short Flanged receptacle SIM 2 B 42 k SIM 2 S 42 k SIM 2 B 44 k SIM 2 S 44 k SIM 2 B 43 k SIM 2 S 43 k SIM 2 B 45 k SIM 2 S 45 k a a Capot d'embase durci Shielded receptacle cover Serre-cables orientables Adjustable cable clamps Capot de protection composants Component protection cover 3351 6072 kk 3351 6022 kkk 3351 6012 kkk k Les terminaisons des references sont definies page 37 et 38. k Part number endings, pages 37 and 38. 40 EMBASES COMPOSITES COMPOSITE RECEPTACLES 2 modules 2 modules Embase Receptacle 42 / 43 Embase a collerette Flanged receptacle 44 / 45 Embase Receptacle 42 / 43 15,2 (.6) A 12,5 (.49) 14 (.56) B Embase a collerette Flanged receptacle 44 / 45 Trous oblongs Oblong holes 3,3 0,1 (.13 .003) 5(.12) 16 version standard (.63) standard version 44,6 (1.76) 49,50,1(1.95.003) C 50,50,1(1.99.003) EMBASE COMPOSITE 2 MODULES 2 MODULES COMPOSITE RECEPTACLE Boitier / Shell Type Standard / Standard Embase standard Standard receptacle Durcie / Shielded Standard / Standard Embase courte Short receptacle Durcie / Shielded Standard / Standard Embase a collerette Flanged receptacle Durcie / Shielded Standard / Standard Embase courte a collerette Flanged short receptacle Durcie / Shielded 4 modules Ref. / P/N SIM 2B 42 K SIM 2S 42 K SIM 2B 43 K SIM 2S 43 K SIM 2B 44 K SIM 2S 44 K SIM 2B 45 K SIM 2S 45 K A max mm (inch) B max mm (inch) C max mm (inch) 26,8 (1.06) 55,5 (2.19) 16 (.63) 23,1 (.91) 26,8 (1.06) 57,5 (2.26) 20,4 (.80) 23,1 (.91) 4 modules Embase Receptacle 82 / 83 Embase a collerette Flanged receptacle 84 / 85 Ecrou M3 autofreine pour montage sous structure Self-locking M3 nut for under panel mounting 15,2 (.6) A Trous oblongs Oblong holes 12,5 (.49) 14 (.56) B 3,3 0,1 (.13 .003) 5 (.2) 75 (2.95) 800,1(3.15.003) C 16 version standard (.63) standard version EMBASE COMPOSITE 4 MODULES 4 MODULES COMPOSITE RECEPTACLE Boitier / Shell Type Standard / Standard Embase standard Standard receptacle Durcie / Shielded Standard / Standard Embase courte Short receptacle Durcie / Shielded Standard / Standard Embase a collerette Flanged receptacle Durcie / Shielded Standard / Standard Embase courte a collerette Flanged short receptacle Durcie / Shielded Ref. / P/N SIM 2B 82 K SIM 2S 82 K SIM 2B 83 K SIM 2S 83 K SIM 2B 84 K SIM 2S 84 K SIM 2B 85 K SIM 2S 85 K 810,1(3.19.003) A max mm (inch) 86 (3.36) 88 (3.46) B mm (inch) C mm (inch) 26,8 (1.06) 23,1 (.91) 26,8 (1.06) 23,1 (.91) 16 (.63) 20,4 (.80) Pas de possibilites de montage d'accessoires sur les embases courtes Accessories cannot be mounted on short receptacles. Les embases 44/45 et 84/85 sont livrees sans joint de panneau. Pour les commander equipees : ajouter JC ou JN (Joint Conducteur ou Non) en fin de reference. ex : SIM 2D 84 V JC 41 Receptacles 44/45 and 84/85 are not supplied with a panel seal. Ad JN or JC (seal Conductor or Not) at the end of the part number to order it equiped. ex : SIM 2D 84 V JC FICHES CLICKER NUT COMPOSITE COMPOSITE CLICKER NUT PLUGS 15,9max (.626)maxi 1,3max (.051)maxi 2 modules 2 modules 28,1max (1.106)maxi FICHE CLICKER NUT 2 MODULES 2 MODULES CLICKER NUT PLUG Composite standard Standard composite Composite durci Shielded composite Ref. / P/N SIM 2B 40 K SIM 2S 40 K 44,6 maxi(1.756) max 4 modules 4 modules 28,1max (1.106) maxi FICHE CLICKER NUT 4 MODULES 4 MODULES CLICKER NUT PLUG Composite standard Standard composite Composite durci Shielded composite 75 max (2.952) maxi 42 Ref. / P/N SIM 2B 80 K SIM 2S 80 K ACCESSOIRES COMPOSITE COMPOSITE ACCESSORIES 2 modules 4 modules cAPOT DE PROTECTION COMPOSANTS COMPONENTS PROTECTION COVER 75 (2.95) 44,5 (1.75) 30 (1.18) 30 (1.18) 4 (.16) 4 (.16) 45,5 (1.8) 76 (2.99) 15,2 (.6) Capot de protection pour composants electroniques cables ou shunts sur l'arriere des modules. Protection cover for electronic components wired or shunted on the rear side of the modules. ADJUSTABLE CABLE CLAMP SERRE-CABLES A SORTIES ORIENTABLES Cosse : section sertissable de 0,5 a 1,5 mm Thimble : crimping section .019 to .059 in 75 (2.95) 44,5 (1.75) a 20,5 (.81) 28,5 (1.12) 20,5 (.807) 28,5 (1.12) 4 (.16) 4 (.16) 45,5 (1.8) 76 (2.99) 15,2 max (.6 maxi) a a 2 ou 4 guides serre-cables amovibles individuellement, orientables en position verticale ou horizontale a 43 2 or 4 cable clamps, removable and adjustable individually, vertically and horizontally. ACCESSOIRES COMPOSITE COMPOSITE ACCESSORIES serre-cables monobloc monoblocK cable clamp Sans revetement. No coating. 25 (0.984) 18 (.708) 4 (.157) 75 (2.952) 15 (.590) Accessoires pour connecteurs 2 modules / Accessories for 2 modules connector Capot de protection composants Serre-cables a sorties orientables Accessoires pour connecteurs 4 modules / Accessories for 4 modules connector Capot de protection composants Serre-cables a sorties orientables Serre-cables monobloc Components protection cover Adjustable cable clamps Monoblock cable clamp k Les terminaisons de references sont definies pages 37 et 38 Ref. / P/N 3351 6012 kkk 3351 6022 kkk Components protection cover Adjustable cable clamps Ref. / P/N 3351 6014 kkk 3351 6024 kkk 3351 6084 303 k Part number details, pages 37 and 38 44 CAPOTS ET CHEMINEES 4 MODULES COVERS AND CHIMNEYS 4 MODULES Capot composite sans cheminEe Composite cover without CHIMNEYS 30,3 (1.193) 15 (.590) 4 (.157) 75 (2.952) 76,5 (3.011) CHEMINEES ET OBTURATEUR CHIMNEYS AND SEAL PLUG Cheminee ovale Oval chimney 0,25 (.009) tout autour overall O 11 (.433 dia) O 9,5 (.374 dia) 25,3 (.996) 23,1(.909) 24,3 (.956) 14 (.551) 15,5 (.610) Obturateur Seal plug Cheminee cylindrique Cylindrical chimney O 10,5 (.413 dia) O 9,5 interieur (inside dia .374) section 70,8 mm (section 70,8 mm) O 14,2 (.559 dia) 1 (.039) Section interieure 70,8 mm (Inside section 70,8 mm) 12,3 (.484) 10,1 (.397) Section interieure de l'ovale 190,6 mm (Inside oval section 190,6 mm) Accessoires Accessories Capot de fiche composite Capot d'embase composite Bouchon d'embase Cheminee cylindrique Obturateur Cheminee ovale Composite plug cover Composite receptacle cover Plug cover Cylindrical chimney Seal plug Oval chimney 45 Ref. P/N 3351 6064 020 3351 6074 020 3350 5234 020 006114 051 18 006114 053 18 006114 052 18 CAPOTS ET CHEMINEES 2 MODULES COVERS AND CHIMNEYS 2 MODULES Capot composite sans cheminEe Composite cover without CHIMNEYS 30 (1.181) 4 (.157) 15,2 max (.598) 44,5 (1.752) 46 (1.811) CHEMINEES ET OBTURATEURS CHIMNEYS AND SEAL PLUGS Cheminee cylindrique Cylindrical chimney Obturateur Seal plug O 11 (.433 dia) O 9,5 (.374 dia) 0,25 (.009) tout autour overall 14 (.551) O 10,5 (.413 dia) O 14,2 (.559 dia) 1 (.039) Section interieure 70,8 mm (Inside section 70,8 mm) Accessoires Accessories Capot de fiche composite Capot d'embase composite Cheminee cylindrique Obturateur Composite plug cover Composite receptacle cover Cylindrical chimney Seal plug 46 Ref. P/N 3351 6062 020 3351 6072 020 006114 051 18 006114 053 18 DETROMPAGE A L'ACCOUPLEMENT COUPLING POLARIZATION Le systeme de detrompage entre fiche et embase utilise 6 noix de detrompage et 6 clefs permettant, par rotation angulaire 36 codes. The polarization system between the plug and receptacle consists of 6 polarizing nuts and 6 keys which allow 36 polarization combinations, by rotation. Les noix des embases sont montees a l'aide de l'outil ref. : 006101 005 00 (page 54) Receptacle nuts are assembled with tool Ref.006101 005 00 (page 54) Elles sont demontables et reindexables par l'avant avec l'outil ref. : 006101 003 00 (page 54) lorsque l'arriere des embases est inaccessible. They are frontly removable and re-polarized with tool Ref : 006101 003 00 (page 54) when receptacle rearside is out of reach. Couple de serrage de la noix 0,10 a 0,13 daN.m Polarizing nut torque 0,10 to 0.13 daN.m Noix de detrompage montees sur embase Polarizing nuts mounted on receptacle CODE CODE CODE CODE CODE CODE Violet/ Purple Jaune/ Yellow Vert/ Green Bleu/ Blue Orange/ Orange Blanc/ White Universel/ Standard Ref. / P/N 006114 210 01 Ref. / P/N 006114 210 02 Ref. / P/N 006114 210 03 Ref. / P/N 006114 210 04 Ref. / P/N 006114 210 05 Ref. / P/N 006114 210 06 Ref. / P/N 006114 210 07 A C B E D Cles de detrompage montees sur fiche CODE F G Polarizing keys mounted on plug CODE CODE CODE CODE CODE CODE Violet/ Purple Jaune/ Yellow Vert/ Green Bleu/ Blue Orange/ Orange Blanc/ White Universel/ Standard Ref. / P/N 006114 200 01 Ref. / P/N 006114 200 02 Ref. / P/N 006114 200 03 Ref. / P/N 006114 200 04 Ref. / P/N 006114 200 05 Ref. / P/N 006114 200 06 Ref. / P/N 006114 200 07 A C B E D Mise en oeuvre suivant procedure page 45 CODE F G Assembly according to instructions page 45 DETROMPAGE SUR BOITIERS SHELLS POLARIZATION Position 2 = Code 02 Position 3 = Code 03 Position 4 = Code 04 Position 1 = Code 01 Position 6 = Code 06 47 Position 5 = Code 05 PROCEDURE DE POLARISATION DE VERROUILLAGE POLARIZATION AND LOCKING INSTRUCTIONS PROCEDURE DE MONTAGE NOIX DE DETROMPAGE 1 POLARIZING NUT ASSEMBLY INSTRUCTIONS 2 6 5 3 4 7 1 Montage du joint dans la gorge placee devant le six pans. 1 2 L'utilisation du freinfilet "faible" est recommandee. 2 We recommande to use a Freinfilet weak. 3 Inserer la noix de detrompage par l'arriere du connecteur. Engager le six pans dans la rainure prevue a cet effet, en prenant soin de positionner l'ergot pour obtenir la polarisation desiree. 3 Insert the polarizing nut by the rear of the connector. Engage the hexagonal nut in the groove taking care of the position of the stop-pin, in order to obtain the wished polarization. 4 Dans le cas d'une noix a double ergot, c'est le plus gros des deux qui stipule la polarisation : polarisation 6 sur la photo n 4. 4 In the case of a double stop-pin nut, the bigger ensure the polarization (on the picture n 4, choice is polarization 6) 5 Engager l'ecrou de blocage 3350 0170 703 sur la noix. 5 Engage the fixing screw-nut 3350 0170 703 on the polarizing nut. 6 Visser l' ecrou de blocage a l'aide de l'outil 006101 005 00 (page 54). 6 Screw the nut with the tool 006101 005 00 (page 54) Place the seal in the groove near the hexagonal nut. 7 Serrer a l'aide d'une cle dynamometrique. 7 End operating with a dynamometric key, applying a thightening torque between 0,10 and 0,13 daNm. Couple de serrage de 0,10 Nm a 0,13 Nm maxi 8 Let dry 15 minutes at the ambient air. 8 Laisser secher 15 minutes a air ambiante. PROCEDURE DE MONTAGE CLE DE DETROMPAGE 1 POLARIZING KEY ASSEMBLY INSTRUCTIONS 2 3 1 Place the key on the interface side of the connector, and orientate to obtain the wished polarization. In the case of a double stop-pin key, the bigger indicates the polarization 1 Positionner la cle dans le logement prevu a cet effet, cote interface du connecteur, orienter la cle afin d'obtenir la polarisation desiree. Dans le cas d'une cle a double rainure, la plus large indique la polarisation. 2 Press on the key and you will hear a little clic meaning the locking is done. 2 Exercer une pression sur la cle jusqu'a entendre le "clic" du verrouillage. 3 The connector is ready to be used. 3 Le connecteur est pret a l'emploi. NOTE :To change the polarization again, you will have to pull out the key with the tool 006101 004 00 (page 54). You will also have to change the former key by a new one. NOTA : En cas de modification de detrompage, vous devez utiliser pour extraire la cle, la pince 006101 004 00 (page 54) et remplacer la cle extraite par une cle neuve. 48 REFERENTIEL PART NUMBER TABLE Ref. Air LB Air LB P/N Description Description Masse Weight g Page 3350 5234 020 Bouchon d'embase receptacle cover 19,10 45 3351 6062 020 Capot de fiche durci 2 modules 2 modules shielded plug cover 14,80 46 3351 6064 020 capot de fiche durci 4 modules 4 modules shielded plug cover 23,90 45 3351 6072 020 Capot d'embase durci 2 modules 2 modules shielded receptacle cover 16,60 46 3351 6074 020 Capot d'embase durci 4 modules 4 modules shielded receptacle cover 24,70 45 3351 6084 303 serre cable monobloc 4 modules 4 modules monoblock cable clamp 25,50 44 006114 051 18 Cheminee cylindrique Cylindrical pipe 1,60 45-46 006114 052 18 Cheminee ovale Oval pipe 3,80 45 006114 200 01 Cle de detrompage code A polarizing key code A 0,40 47 006114 200 02 Cle de detrompage code B polarizing key code B 0,40 47 006114 200 03 Cle de detrompage code C polarizing key code C 0,40 47 006114 200 04 Cle de detrompage code D polarizing key code D 0,40 47 006114 200 05 Cle de detrompage code E polarizing key code E 0,40 47 006114 200 06 Cle de detrompage code F polarizing key code F 0,40 47 006114 200 07 Cle de detrompage code G polarizing key code G 0,40 47 006114 210 01 Noix de detrompage code A polarizing nut code A 2,30 47 006114 210 02 Noix de detrompage code B polarizing nut code B 2,30 47 006114 210 03 Noix de detrompage code C polarizing nut code C 2,30 47 006114 210 04 Noix de detrompage code D polarizing nut code D 2,30 47 006114 210 05 Noix de detrompage code E polarizing nut code E 2,30 47 006114 210 06 Noix de detrompage code F polarizing nut code F 2,30 47 006114 210 07 Noix de detrompage code G polarizing nut code G 2,30 47 3351 6022 *** serre cables orientable 2 modules Adjustable cable clamp 12,80 44 3351 6024 *** serre cables orientable 4 modules 4 modules adjustable cable clamp 19,60 44 3351 6012 *** capot de protection composant 2 modules components protection cover 15,00 44 3351 6014 *** capot de protection composant 4 modules 4 modules components protection cover 23,50 44 SIM 2 B 40 K Fiche clicker nut 2 modules 2 modules clicker nut plug 15,25 42 SIM 2 S 40 K Fiche clicker nut composite durci 2 modules 2 modules shielded composite clicker nut plug SIM 2 B 42 K Embase standard 2 modules 2 modules standard receptacle 8,50 41 SIM 2 S 42 K Embase standard composite durci 2 modules 2 modules shielded composite standard receptacle SIM 2 B 43 K Embase courte 2 modules 2 modules short receptacle 7,50 41 SIM 2 S 43 K Embase courte composite durci 2 modules 2 modules shielded composite short receptacle SIM 2 B 44 K Embase a collerette 2 modules 2 modules flanged receptacle SIM 2 S 44 K Embase a collerette composite durci 2 modules 2 modules shielded composite flanged receptacle SIM 2 B 45 K Embase a collerette courte 2 modules 2 modules short flanged receptacle SIM 2 S 45 K Embase a collerette courte composite durci 2 modules 2 modules shielded composite short flanged receptacle SIM 2 B 80 K Fiche clicker nut 4 modules 4 modules clicker nut plug SIM 2 S 80 K Fiche clicker nut composite durci 4 modules 4 modules shielded composite clicker nut plug 42 41 41 9,70 41 41 8,70 41 41 19,70 41 41 SIM 2 B 82 K Embase standard 4 modules 4 modules standard receptacle SIM 2 S 82 K Embase standard composite durci 4 modules 4 modules shielded composite standard receptacle 12,5 41 41 SIM 2 B 83 K Embase courte 4 modules 4 modules short receptacle 41 SIM 2 S 83 K Embase courte composite durci 4 modules 4 modules shielded composite short receptacle 41 SIM 2 B 84 K Embase a collerette 4 modules 4 modules flanged receptacle SIM 2 S 84 K Embase a collerette composite durci 4 modules 4 modules shielded composite flanged receptacle 41 SIM 2 B 85 K Embase a collerette courte 4 modules 4 modules short flanged recepatcle 41 SIM 2 S 85 K Embase a collerette courte composite durci 4 modules 4 modules shielded composite short flanged recepatcle 41 49 14,90 41 SIM SPLICE SIM SPLICE Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 50 PRESENTATION PRESENTATION Le SIM Splice permet le raccordement de tout equipement embarque necessitant une parfaite etancheite et une connexion / deconnexion rapide de deux modules SIM. Modulaire, il autorise l'emploi de differents inserts permettant de couvrir une large plage de sections de cables (de 0,25 a 2,5 mm) et d'intensites (jusqu'a 23A). SIM Splice is a part allowing reliable, quick and perfetc sealed connection / disconnection between two embedded equipments. Modular, SIM splice is fitted with inserts allowing a wide range of cable cross sections (0,25 to 2,5 mm) with a current up to 23A. Existant en version standard, en version equipee de serre-cables, et en version a collerette pour montage sur cloison ou en traversee, il beneficie des avantages des connecteurs SIM serie II. Developped in three types : standard, with cable clamps, and flanged, this splice inherits the SIM serie II connectors features & benefits. Il peut etre fixe sur/sous structure ou en traversee de cloisons. It can be fixed on/under a structure or Feedthru. MISE EN OEUVRE : IMPLEMENTATION : 3 possibilites de fixer le prolongateur SIM sur structure : 3 possibilities to mount the SIM Modular splice on structure: - Par collage (prolongateur standard) - Par vis M3 et rondelle (prolongateur avec serre-cables) - Par vis M3 en traversee de cloison (prolongateurs standard ou avec serre-cables equipes d'une collerette) - using glue (Standard SIM splice) - using M3 screw and washer (SIM splice with cable clamp) - using M3 screw for Feedthru application (Standard SIM splice with flange or SIM splice with cable clamp and flange) 2 possibilites de cablage, selon usages : 2 wiring process possible : - soit insertion des modules pre-cables - either insertion of modules previously fitted - soit cablage des modules prealablement inseres - or wiring of modules previously inserted in the SIM splice 2 possibilites de demontage des modules : A B 2 Modules disconnection possible : - 1 : pression des languettes de deverrouillage A - 2 : traction sur le toron de cables - 1 : utilisation de l'outil d'extraction des modules SIM (page 61) B - 2 : traction sur le toron de cables - 1 : push the unlocking system - 2 : pull up the electrical bundles - 1 : use the extraction toll for SIM modules (page 61) - 2 : pull up the electrical bundles Collerette Flange Languettes de deverrouillage Un-locking system Serre-cables Cables clamp La gamme SIM splice est qualifiee NFF 61-030. SIM splice range is qualified NFF 61-030 standard. 51 CARACTERISTIQUES TECHNIQUES TECHNICAL DATA MECANIQUE MECHANICAL Matiere : Boitier Joint module Contacts Protection des contacts Retention des modules dans le boitier Endurance insert/extract des modules : Thermoplastique noir : Elastomere bleu : Alliage cuivreux : Or sur Nickel : 25,4 daN : 500 cycles complets Material : Shell Seal Contacts Protection Modules retention in shell Endurance (insert/extract) : Black thermoplastic : Blue elastomer : Copper alloy : Gold on nickel : 25,4daN : 500 full cycles ENVIRONMENT CLIMATIQUE Operating temperature Temperature d'utilisation : -55 a +175 C permanent : -55C to +175C continously ELECTRIC ELECTRIQUE Current rating (max) Intensite max. : contacts taille 20 : 7,5 A contacts taille 16 : 13 A contacts taille 12 : 23 A Tension de tenue : 1800 V eff. 50 Hz Withstanding voltage : contacts size 20 : 7,5 A contacts size 16 : 13 A contacts size 12 : 23 A : 1800 V RMS 50 Hz FLAMMABILITY COMPORTEMENT AU FEU I3-F2 Exigency 2 as per NFF16-101 and NFF16-102 Indice I3-F2 Exigence 2 suivant NFF16-101 et NFF 16-102 SEALING ETANCHEITE Ingress protection rating Indice de protection : IP66 : IP66 SHOCKS AND VIBRATIONS TENUE AUX CHOCS ET VIBRATIONS As per EN 4165 and NF EN 61-373 standard Conforme a l'EN 4165 et a la NF EN 61-373 SYSTEME DE REFERENCE PART NUMBER SYSTEM SIM 2 - S - 1 - k - k - k Connecteur Serie II Series II Connector PROTECTION PLATING Not metallized (1) S SPLICE SPLICE 1 ACCESSOIRES ACCESSORIES Non metalise (1) sans serre-cables without cables clamp avec serre-cables with cables clamp 0 1 FIXATION ATTACHMENT sans fixation without fixing fixation laterale par etrier (2) lateral fixing by stirrup (2) fixation structure par collerette DETROMPAGE MODULES structure fixing by flange MODULES POLARIZING A A B (2) B (2) C (2) (1) (2) D (2) Pour toute autre demande, merci de nous consulter Merci de nous consulter C (2) D (2) (1) (2) Please contact us for any other requiest Please contact us 52 0 1 2 A B C D SIM SPLICE VERSION STANDARD SIM SPLICE STANDARD VERSION 35,5 max (1.4 maxi) Ref P/N : SIM 2 S 1 0 0 Q 18 max (.71 maxi) Voir detrompage modules page 52 See modules polarizing on page 52 (1) (1) 16 max (.63 maxi) (1) Il est conseille d'utiliser des modules sans joint peripherique (SIM M F QQQQ Q Q Q ) (1) It' s recommended to use modules without peripheral sealing (SIM M F QQQQ Q Q Q ) SIM SPLICE AVEC SERRE-CABLES SIM SPLICE WITH CABLES CLAMP Ref P/N : SIM 2 S 1 1 0 Q Voir detrompage modules page 52 See modules polarizing on page 52 (1) (1) 8 (.32) O 3,2 (.13 dia) 18 max (.71 maxi) 18 max (.71 maxi) (1) 85 max (3.35 maxi) Il est conseille d'utiliser des modules sans joint peripherique (SIM M F QQQQ Q Q Q ) (1) 53 It' s recommended to use modules without peripheral sealing (SIM M F QQQQ Q Q Q ) SIM SPLICE AVEC COLLERETTE SIM SPLICE WITH FLANGE 2,2 (.09) 23,3 (.92) Ref P/N : SIM 2 S 1 0 2 Q O 3,14 (.12 dia) Voir detrompage modules page 52 See modules polarizing on page 52 (1) (1) 20,3 (.8) 25,8 (1.02) 28,8 (1.13) (1) Il est conseille d'utiliser des modules sans joint peripherique (SIM M F QQQQ Q Q Q ) (1) It' s recommended to use modules without peripheral sealing (SIM M F QQQQ Q Q Q ) SIM SPLICE AVEC SERRE-CABLES ET COLLERETTE SIM SPLICE WITH CABLE CLAMP AND FLANGE Ref P/N : SIM 2 S 1 1 2 Q Voir detrompage modules page 52 See modules polarizing on page 52 (1) (1) (1) Il est conseille d'utiliser des modules sans joint peripherique (SIM M F QQQQ Q Q Q ) (1) It' s recommended to use modules without peripheral sealing (SIM M F QQQQ Q Q Q ) REFERENTIEL PART NUMBER TABLE Ref. Air LB Air LB P/N SIM 2 S 1 0 0 Q SIM 2 S 1 0 2 Q SIM 2 S 1 1 0 Q SIM 2 S 1 1 2 Q Description Description SIM splice version standard SIM splice avec collerette SIM splice avec serre cables SIM splice avec serre cables et collerette 54 SIM splice standard version SIM splice with flange SIM splice with cable clamp SIM splice with cable clamp and flange Page 53 54 53 54 55 Modules et Contacts pour Connecteurs SIM Modules and Contacts for SIM Connectors Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 56 CARACTERISTIQUES TECHNIQUES TECHNICAL DATA MECANIQUE MECHANICAL Boitier Shell Joint Matiere : Thermoplastique noir Seal Matiere : Elastomere bleu Material : Black thermoplastic Material : Blue elastomer COMPORTEMENT AU FEU BEHAVIOUR TO FIRE Indice I2-F3 Exigence 3 suivant NFF 16-101 et NFF 16-102 I2-F3 Exigence 3 level according to NFF 16-101 and NFF 16-102 SYSTEME DE REFERENCE PART NUMBER SYSTEM Module Module Non etanche en peripherie Without peripheral sealing Arrangement des contacts Contact layouts 12 contacts taille 20 8 contacts taille 16 4 contacts taille 12 RJ45 Ethernet 12 contacts 8 contacts 4 contacts RJ45 Ethernet size 20 size 16 size 12 SIM M 1220 0816 0412 0145 Autres configurations possibles, nous consulter / other available configurations, consult us Contacts Contacts Male Femelle Pin Socket POLARISATION POLARIZATION Polarisation N Polarisation A Polarisation B Polarisation C Polarisation D N polarization A polarization B polarization C polarization D polarization OPTIONS Modules livres sans contact Modules livres avec contacts a sertir suivant page 58 P S N A B C D OPTIONS Modules delivered without contact Modules delivered with crimping contacts, see page 58 57 Rien/Nothing C M F kkkk k k k ARRANGEMENTS pour Connecteurs SIM et SIM Splice LAYOUTS for SIM Connectors and SIM Splice Vue face avant male Pin front view Arrangement Layout Male Pin Femelle Socket 12 contacts taille 20 12 contacts size 20 SIM Q F 1220 P Q SIM Q F 1220 S Q 8 contacts taille 16 8 contacts size 16 SIM Q F 0816 P Q SIM Q F 0816 S Q 4 contacts taille 12 4 contacts size 12 SIM Q F 0412 P Q SIM Q F 0412 S Q Sim RJ45 Ethernet SIM M 0145 P N SIM M 0145 S N Q Voir polarisation page 57 Q See polarization on page 57 Pour tout autre arrangement, merci de consulter le catalogue Connecteurs SIM Please consult the SIM Connectors documentation for any other layouts Pour le SIM Splice, il est conseille d'utiliser des modules sans joint peripherique (SIM M F QQQQ Q Q Q ) It' s recommended to use modules without peripheral sealing in the SIM Splice (SIM M F QQQQ Q Q Q ) CONTACTS A SERTIR CRIMPABLE CONTACTS MALE PIN P S FEMELLE SOCKET Trou de controle Peep hole CONTACTS DERIVES DE LA NORME Contacts Ref. P/N Type EN 3155-003 F 2018 001704 205 92 S EN 3155-008 M 2018 001714 205 92 P EN 3155-003 F 1614 001704 302 92 S EN 3155-008 M 1614 001714 302 92 P EN 3155-003 F 1212 001704 400 92 S EN 3155-008 M 1212 001714 400 92 P Section mm O sur gaine Sheath dia. mm (inch) Pince a sertir Crimping tool Positionneur Locator 20 0.25 a 1 0.85 - 1.73 (.033 - .068) M 22520/1-01 ou .../2-01, .../7-01 M 22520 / 1-04 ou .../ 2-10, .../ 7-08 M 81969 / 14-10 M 22520 / 1-04 ou .../ 7-04 M 81969/14-03 16 12 0,60 a 2 1.31 - 2.62 (.051 - .103) 1.90 a 2.50 1,90 - 3,70 (.075 - .145) Contacts Type EN 3155-003 F 1614 001704 302 02 S EN 3155-008 M 1614 001714 302 02 P Montage avec contact male Assembly with a pin contact M22520 / 1-04 Section mm O sur gaine Sheath dia. mm (inch) Pince a sertir Crimping tool Positionneur Locator 16 0,60 a 2 1.31 - 2.62 (.051 - .103) M22520/1-01 ou .../7-01 M 22520 / 1-04 ou .../ 7-04 001112 250 25 001112 300 25 M 81969/14-04 001112 400 25 INSERTION EXTRACTION M 81969/14-03 001112 320 25 *Only extract OBTURATEURS D'ETANCHEITE 2 M22520/1-01 Taille Size *Extraction uniquement 1 M22520/1-01 ou .../7-01 OUTILLAGE DE SERTISSAGE CRIMPING TOOLING CABLE STANDARD CONTACTS Ref. P/N INSERTION EXTRACTION Taille Size CONTACTS NORMALISES Montage sans contact male Assembly without pin contact OUTILLAGE DE SERTISSAGE CRIMPING TOOLING CABLE CONTACTS FROM STANDARD 2 Joint Seal SEALING PLUG 1 Module Taille Size 20 16 12 Couleur Colour Rouge / Red Bleu / Blue Jaune / Yellow PTFE (-55 a/to +175C) 001109 200 42 001109 300 40 001109 400 41 Conditionnes par 100 et 500 / Packaged by 100 and 500 parts 58 OUTILS POUR CONTACTS TOOLS FOR CONTACTS Outil insertion / extraction contacts taille 20 Insertion / Extraction tool for contact size 20 Outil insertion / extraction contacts taille 16 Insertion / Extraction tool for contact size 16 Ref. / P/N : 001112 250 25 Norme: M 81969 / 14-10 Ref. / P/N : 001112 300 25 Norme: M 81969 / 14-03 Outil insertion / extraction contacts taille 12 Insertion / Extraction tool for contact size 12 Ref. / P/N : 001112 400 25 Norme: M 81969 / 14-04 59 REFERENTIEL PART NUMBER TABLE Ref DESCRIPTION DESCRIPTION Page 001109 200 42 Obturateur d'etancheite taille 20 Sealing plug size 20 58 001109 300 40 Obturateur d'etancheite taille 16 Sealing plug size 16 58 001109 400 41 Obturateur d'etancheite taille 12 Sealing plug size 12 58 001112 250 25 Outil d'insert./extract. des contacts taille 20 Insertion/extraction tool for contacts size 20 59 001112 300 25 Outil d'insert./extract. des contacts taille 16 Insertion/extraction tool for contacts size 16 59 001112 400 25 Outil d'insert./extract. des contacts taille 12 Insertion/extraction tool for contacts size 12 59 001704 205 92 Contact femelle taille 20 Socket contact size 20 58 001704 302 02 Contact femelle taille 16 Socket contact size 16 58 001704 302 92 Contact femelle taille 16 Socket contact size 16 58 001704 400 92 Contact femelle taille 12 Socket contact size 12 58 001714 205 92 Contact male taille 20 Pin contact size 20 58 001714 302 02 Contact male taille 16 Pin contact size 16 58 001714 302 92 Contact male taille 16 Pin contact size 16 58 001714 400 92 Contact male taille 12 Pin contact size 12 58 SIM * F 0412 P * Module male 4 contacts taille 12 Pin module 4 contacts size 12 58 SIM * F 0412 S * Module femelle 4 contacts taille 12 Socket module 4 contacts size 12 58 SIM * F 0816 P * Module male 8 contacts taille 16 Pin module 8 contacts size 16 58 SIM * F 0816 S * Module femelle 8 contacts taille 16 Socket module 8 contacts size 16 58 SIM * F 1220 P * Module male 12 contacts taille 20 Pin module 12 contacts size 20 58 SIM * F 1220 S * Module femelle 12 contacts taille 20 Socket Module 12 contacts size 20 58 60 OUTILS CONNECTEURS SIM SIM CONNECTORS TOOLS Extraction des Modules Extraction of Modules Insertion des Modules * Insertion of Modules * Ref. / P/N : 006101 000 00 Ref. / P/N : 006101 006 00 Extraction des Modules RJ45 Extraction of RJ45 Modules Ref. / P/N : 006101 008 00 Fixation des accessoires Locking of accessories Verrouillage des connecteurs Locking of connectors Tournevis hexagonal 2 mm sur plats Tournevis hexagonal 3 mm sur plats Hexagonal screwdriver .078 inch across flats Hexagonal screwdriver .118 inch across flats Ref. / P/N : 006101 001 00 Ref. / P/N : 006101 002 00 Montage des noix de detrompage par l'avant Assembly of polarizing nuts by the front Reindexation des noix de detrompage par l'avant Angular modification of polarizing nuts by the front Ref. / P/N : 006101 003 00 Ref. / P/N : 006101 005 00 Extra ctio n d es c les de det r om page Extra ctio n o f polar iz ing k ey s Cape de protection : fiches et embases Protection cover : receptacles and plugs Ref. / P/N : 3350 0892 504 (2 modules) 3350 0894 504 (4 modules) Ref. / P/N : 006101 004 00 Cape de protection / Protection cover Cape de protection ESD (Electro Static Discharge) ESD protection cover (Electro Static Discharge) Accouplement embase 4 modules (2pieces) Mating receptacle 4 modules (2 parts) ESD Ref. / P/N : 3350 0899 345 (2 modules) 3350 0896 345 (4 modules) Standard Ref. / P/N : 3350 0899 504 (2 modules) 3350 0896 504 (4 modules) Ref. / P/N : 3350 0892 345 (2 modules) 3350 0894 345 (4 modules) * Recommande pour les modules etanches 61 * Recommended for sealed modules REFERENTIEL CONNECTEURS SIM SIM CONNECTORS PART NUMBER TABLE Ref. Air LB / Air LB P/N DESCRIPTION DESCRIPTION Page 001109 200 42 001109 300 40 001109 400 41 001112 300 25 001112 400 25 001704 205 92 001704 302 02 001704 302 92 001704 400 92 001714 205 92 001714 302 02 001714 302 92 001714 400 92 006101 000 00 006101 001 00 006101 002 00 006101 003 00 006101 004 00 006101 005 00 006101 006 00 006101 008 00 006114 051 18 006114 052 18 006114 200 01 006114 200 02 006114 200 03 006114 200 04 006114 200 05 006114 200 06 006114 200 07 006114 210 01 006114 210 02 006114 210 03 006114 210 04 006114 210 05 006114 210 06 006114 210 07 3350 0892 345 3350 0894 34 3350 0892 504 3350 0894 504 3350 0896 345 3350 0896 504 3350 0899 345 3350 0899 504 3350 5234 020 3351 6062 020 3351 6064 020 3351 6072 020 3351 6074 020 3351 6084 303 3351 6022 *** 3351 6024 *** 3351 6012 *** 3351 6014 *** SIM * F 0412 P * SIM * F 0412 S * SIM * F 0816 P * SIM * F 0816 S * SIM * F 1220 P * SIM * F 1220 S * Obturateur d'etancheite taille 20 Obturateur d'etancheite taille 16 Obturateur d'etancheite taille 12 Outil d'insert./extract. des contacts taille 16 Outil d'insert./extract. des contacts taille 12 Contact femelle taille 20 Contact femelle taille 16 Contact femelle taille 16 Contact femelle taille 12 Contact male taille 20 Contact male taille 16 Contact male taille 16 Contact male taille 12 Outil d'extraction des modules Outil pour verrouillage des connecteurs Outil pour fixation des accessoires Outil pour reindexation des noix de detrompage par l'avant Outil pour extraction des cles de detrompage Outil pour montage des noix de detrompage par l'avant Outil d'insertion des modules Outil d'extraction des modules RJ45 Cheminee cylindrique Cheminee ovale Cle de detrompage code A Cle de detrompage code B Cle de detrompage code C Cle de detrompage code D Cle de detrompage code E Cle de detrompage code F Cle de detrompage code G Noix de detrompage code A Noix de detrompage code B Noix de detrompage code C Noix de detrompage code D Noix de detrompage code E Noix de detrompage code F Noix de detrompage code G Cape de protection ESD (2 modules) Cape de protection ESD (4 modules) Cape de protection fiches et embases (2 modules) Cape de protection fiches et embases (4 modules) Cape de protection ESD 4 modules (2 pieces) Cape de protection standard 4 modules (2 pieces) Cape de protection ESD 2 modules (2 pieces) Cape de protection standard 2 modules (2 pieces) Bouchon d'embase Capot de fiche durci 2 modules capot de fiche durci 4 modules Capot d'embase durci 2 modules Capot d'embase durci 4 modules serre cable monobloc 4 modules serre cables orientable 2 modules serre cables orientable 4 modules capot de protection composant 2 modules capot de protection composant 4 modules Module male 4 contacts taille 12 Module femelle 4 contacts taille 12 Module male 8 contacts taille 16 Module femelle 8 contacts taille 16 Module male 12 contacts taille 20 Module femelle 12 contacts taille 20 Sealing plug size 20 Sealing plug size 16 Sealing plug size 12 Insertion/extraction tool for contacts size 16 Insertion/extraction tool for contacts size 12 Socket contact size 20 Socket contact size 16 Socket contact size 16 Socket contact size 12 Pin contact size 20 Pin contact size 16 Pin contact size 16 Pin contact size 12 Tool for extraction of modules Tool for locking of connectors Tool for locking of accessories Tool for angular modification of polarizing nuts by the front Tool for extraction of polarizing keys Tool for assembly of polarizing nuts by the front Tool for insertion of modules Tool for extraction of RJ45 modules Cylindrical pipe Oval pipe polarizing key code A polarizing key code B polarizing key code C polarizing key code D polarizing key code E polarizing key code F polarizing key code G polarizing nut code A polarizing nut code B polarizing nut code C polarizing nut code D polarizing nut code E polarizing nut code F polarizing nut code G ESD protection cover (2 modules) ESD protection cover (4 modules) Receptacles and plugs protection cover (2 modules) Receptacles and plugs protection cover (4 modules) 4 modules ESD protection cover (2 pieces) 4 modules standard protection cover (2 pieces) 2 modules ESD protection cover (2 pieces) 2 modules standard protection cover (2 pieces) receptacle cover 2 modules shielded plug cover 4 modules shielded plug cover 2 modules shielded receptacle cover 4 modules shielded receptacle cover 4 modules monoblock cable clamp Adjustable cable clamp 4 modules adjustable cable clamp components protection cover 4 modules components protection cover Pin module 4 contacts size 12 Socket module 4 contacts size 12 Pin module 8 contacts size 16 Socket module 8 contacts size 16 Pin module 12 contacts size 20 Socket Module 12 contacts size 20 58 58 58 59 59 58 58 58 58 58 58 58 58 61 61 61 61 61 61 61 61 45-46 45 47 47 47 47 47 47 47 47 47 47 47 47 47 47 61 61 61 61 61 61 61 61 45 46 45 46 45 44 44 44 44 44 58 58 58 58 58 58 62 Ref. Air LB / Air LB P/N DESCRIPTION DESCRIPTION Page SIM * F 0816 S * SIM * F 1220 P * SIM * F 1220 S * SIM 2 B 40 K SIM 2 B 42 K SIM 2 B 43 K SIM 2 B 44 K SIM 2 B 45 K SIM 2 B 80 K SIM 2 B 82 K SIM 2 B 83 K SIM 2 B 84 K SIM 2 B 85 K SIM 2 S 1 0 0 * SIM 2 S 1 0 2 * SIM 2 S 1 1 0 * SIM 2 S 1 1 2 * SIM 2 S 40 K SIM 2 S 42 K SIM 2 S 43 K SIM 2 S 44 K SIM 2 S 45 K SIM 2 S 80 K SIM 2 S 82 K SIM 2 S 83 K SIM 2 S 84 K SIM 2 S 85 K Module femelle 8 contacts taille 16 Module male 12 contacts taille 20 Module femelle 12 contacts taille 20 Fiche clicker nut 2 modules Embase standard 2 modules Embase courte 2 modules Embase a collerette 2 modules Embase a collerette courte 2 modules Fiche clicker nut 4 modules Embase standard 4 modules Embase courte 4 modules Embase a collerette 4 modules Embase a collerette courte 4 modules SIM splice version standard SIM splice avec collerette SIM splice avec serre cables SIM splice avec serre cables et collerette Fiche clicker nut composite durci 2 modules Embase standard composite durci 2 modules Embase courte composite durci 2 modules Embase a collerette composite durci 2 modules Embase a collerette courte composite durci 2 modules Fiche clicker nut composite durci 4 modules Embase standard composite durci 4 modules Embase courte composite durci 4 modules Embase a collerette composite durci 4 modules Embase a collerette courte composite durci 4 modules Socket module 8 contacts size 16 Pin module 12 contacts size 20 Socket Module 12 contacts size 20 2 modules clicker nut plug 2 modules standard receptacle 2 modules short receptacle 2 modules flanged receptacle 2 modules short flanged receptacle 4 modules clicker nut plug 4 modules standard receptacle 4 modules short receptacle 4 modules flanged receptacle 4 modules short flanged recepatcle SIM splice standard version SIM splice with flange SIM splice with cable clamp SIM splice with cable clamp and flange 2 modules shielded composite clicker nut plug 2 modules shielded composite standard receptacle 2 modules shielded composite short receptacle 2 modules shielded composite flanged receptacle 2 modules shielded composite short flanged receptacle 4 modules shielded composite clicker nut plug 4 modules shielded composite standard receptacle 4 modules shielded composite short receptacle 4 modules shielded composite flanged receptacle 4 modules shielded composite short flanged recepatcle 58 58 58 42 41 41 41 41 41 41 41 41 41 53 54 53 54 42 41 41 41 41 41 41 41 41 41 63 SOCLES POUR RELAIS A LANGUETTES Connexions pour clips de 5 suivant ST 363 B Conforme a la norme NF F 62-002-2 F.P. n8 et 10 FASTON TYPE RELAY SOCKETS 5 tab connection in accordance with ST 363 B Complying with NF F 62-002-2 F.P. n8 and 10 Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 64 PRESENTATION PRESENTATION EXIGENCE 3 - REQUIREMENT 3 Premiers socles pour relais - contacts a languettes clips de 5 x 0,8 mm First relay sockets - tab contacts with .196 x .031 mm clips En partenariat avec les services techniques de la , de la et des constructeurs de materiel roulant ferroviaire, Amphenol Air LB a concu et developpe une nouvelle gamme de socles pour relais hermetiques de faible encombrement. In partnership with the Technical Department of the French Railways and Paris Transportation Authority , together with the manufacturers of rolling stock, Amphenol Air LB has designed and developed a new range of sockets for small sealed relays. Les socles Amphenol Air LB font l'objet de la norme NF F 62-002-2 F.P. n 8 et 10. Ils repondent aux conditions severes des normes NF F 63 307 et 16 102 exigence 3. Amphenol Air LB sockets comply with NF F 62-002-2 F.P. n 8 and 10 standard and the strick conditions of NF F 63 307 and 16 102 requirement 3 standards. Chaque bloc isolant comporte des organes de connexion : sur la face avant, il recoit les broches du relais connectees avec les contacts douilles du socle. sur la face arriere, il recoit, par des languettes de 5 x 0,8 mm, des conducteurs equipes de clips Faston sertis. Each insulating block includes connection components : on front side, relay pins connected to socket female contacts. on rear side, connection of .196 x .031 in tabs, conductors with crimped Faston clips. Clips conformes a la norme NF F 00 363 pour des sections de 0,60 a 1,2 mm . Clips comply with NF F 00363 standard for 0,60 to 1,2 mm sections. Les socles Amphenol Air LB possedent un dispositif a clefs de detrompage orientable pour le montage des relais cote avant, qui permettent : 6 positions de detrompage par clefs Amphenol Air LB sockets have a directional polarizing device for front mounting relays allowing : 6 polarizing positions per key Possibilite de fixation des socles sur la structure par vis simple avec : un porte-etiquette de reperage. un bloc ecreteur. un adaptateur. Possible mounting of sockets on structure with a single screw including : a label holder for identification. clamping carrier block. an adaptor. 65 CARACTERISTIQUES TECHNIQUES TECHNICAL DATA MECANIQUE BOITIER Matiere : Thermoplastique noir CONTACTS BROCHES Matiere : Alliage cuivreux Protection : Or sur nickel CONTACTS LANGUETTES Matiere : Alliage cuivreux Protection : Etame COLONNETTES DE DETROMPAGE Matiere : Acier inoxydable VIS DE FIXATION Matiere : Acier Protection : Zingue bichromate COUPLE DE SERRAGE VIS DE FIXATION : 0,07 a 0,11 mdaN MECHANICAL SHELL Material : Black Thermoplastic PIN CONTACTS Material : Copper alloy Protection : Gold on nickel TAB CONTACTS Material : Copper alloy Protection : Tin plate POLARIZING POSTS Material : Stainless steel MOUNTING SCREW Material : Steel Protection : Bichromated zinc MOUNTING SCREW TORQUE : 0,07 to 0,11 mdaN CLIMATIQUE ENVIRONMENTAL Temperature d'utilisation : -55C a +125C permanent 25/070/04 suivant NF C 20600 96 H brouillard salin suivant IEC 68-2-11 essai Ka Tenue feu fumee : Exigence 2 NFF 16.106-16.102 Qualifie selon la norme NF EN ISO 11925-2 (identique a CEI/11170) Operating temperature : -55C to +125C continously 25/070/04 see NF C 20600 96 Hrs salt spray as per IEC 68-2-11 Ka test Flammability : Requirement 2 NFF 16.106-16.102 According to NF ISO 19925-2 and CEI/11170 standards ELECTRIQUE ELECTRICAL Tension de SERVICE Continu : 250 V Alternatif : 250 V 50 Hz TENSION D'ESSAI : 2000 V 50 Hz RESISTANCE D'ISOLEMENT : a 1 000 M RESISTANCE DE CONTACT : 5 m INTENSITE MAXI DES CONTACTS : 10 A LIGNE DE FUITE : 6 mm (suivant NF F 60-101) DIELECTRIC WITHSTANDING DC : 250 V AC : 250 V 50 Hz TEST VOLTAGE : 2000 V 50 Hz INSULATION RESISTANCE : to 1 000 M CONTACT RESISTANCE : 5 m MAXIMUM CONTACT CURRENT RATING : 10 A LEAKAGE PATH : .236 inch (see NF F 60-101) PERIODE DE FABRICATION MANUFACTURING DATE Chaque SOCLE porte les indications suivantes : Each SOCKET bears the following information : Marque : Amphenol Air LB Reference : kkkkkk kkk kk Periode de fabrication : kk - kk semaine annee Trademark : Amphenol Air LB Part number : kkkkkk kkk kk Manufacturing date : kk - kk week year 66 PRINCIPE DES COLONNETTES ORIENTABLES* DIRECTIONAL POLARIZING POSTS PRINCIPLE* COLONNETTE ORIENTABLE POLARIZING POST Ce type de colonnette de fixation du relais est imperdable. Il est muni d'un dispositif de detrompage a 6 positions par clef. This is a captive type of mounting post, equipped with a polarization device with 6 positions per key. a a POSITION 2 POSITION 1 A A b b B B Le detrompage se fait a l'aide des colonnettes A qui sont munies en partie superieure, d'un detrompeur a et en partie inferieure, d'un systeme hexagonal b de reglage qui s'effectue a l'aide d'une languette coulissante B Polarizing is provided by posts A with a polarizer in the upper part a and an hexagonal setting system in the lower part b which is done with a sliding tab B . Cette languette B a deux positions : This tab Position reculee 1 : Possible uniquement sans la vis de fixation du socle, la colonnette peut etre reindexer en pressant legerement dessus et en la faisant tourner sur elle meme afin d'obtenir la polarisation desiree. La colonnette revient automatiquement dans son logement en relachant la pression. Backward position 1 : Only possible without socket mounting screw. The post can be reindexed by pressing lightly and twisting it in order to get the right polarization. The post comes back automatically to its initial position by releasing the pressure. Position avancee 2 : La fixation du socle, en place, empeche tout mouvement de la languette coulissante et du meme fait de la colonnette, aucune nouvelle polarisation n'est possible sans demontage du socle. Forward position 2 : The socket mounting prevents any movement of the sliding tab and the post. Polarization cannot be changed unless the socket is removed. CODES DE DETROMPAGE POLARIZATION CODES U V W X Z Y V V W X Y Y Z X U V W CODE U Y V W CODE V Y V V W CODE W Y YY W X Z X U has two position : V W X Z X U XY V W Z X U WX Y V B W CODE X Y V W X Z X U Z V W CODE Y Y Y X U V W CODE Z *Non directional keys are available. Consult us. *Possibilite d'avoir des clefs non orientables, nous consulter. 67 MONTAGE MOUNTING MONTAGE sur platine MOUTING on plate MONTAGE sous platine MOUTING under plate SOCLE POUR RELAIS RELAY SOCKET Epaisseur structure maxi 4 mm Maximum structure thickness .157 inch PORTE-ETIQUETTE LABEL HOLDER Epaisseur structure maxi 2,5 mm Maximum structure thickness .098 inch BLOC ECRETEUR CLAMPING CARRIER BLOCK Epaisseur structure maxi 2,5 mm Maximum structure thickness .098 inch Montage du bloc ecreteur a l'aide de la cale adaptatrice. Clamping carrier block mounted with the adapting shim. X1 A A B B C C D 68 21 X2 X2 3X2 X1 2 X1 3 X2 D X1 1 PERCAGES PLATINES PLATES DRILLING MONTAGE sur platine MOUTING on plate MONTAGE sous platine MOUTING under plate RELAIS 4 RT 4 RT RELAYS 52 (2.047) 45 (1.771) 52 (2.047) 40 (1.574) R 0,13 (R .005) 30,3 (1.193) R 0,13 (R .005) 27 (1.062) 2 trous O 4,5 2 holes .177 dia RELAIS 6 RT 6 RT RELAYS 52 (2.047) 52 (2.047) 45,5 (1.791) 40 (1.574) 39 (1.535) 44 (1.732) R 0,13 (R .005) R 0,13 (R .005) 2 trous O 4,5 2 holes .177 dia ACCESSOIRES DE MONTAGE MOUNTING ACCESSORIES CALE ADAPTATRICE ADAPTATING SHIM 44,5 (1.752) 30 (1.181) 11 (.433) 7 (.275) 29,8 (1.173) 69 52 (2.047) 5 (.196) 7,3 (.287) 53 (2.086) 30 (1.181) 4 (.157) 20 (.787) 40 (1.574) For Model B drilling Weight : 12,5 g 11 (.433) Pour percage modele B Masse : 12,5 g. 62 (2.441) 21 (.826) Reference / Part number 005510 120 000 SOCLES POUR RELAIS 4 RT - 10A A COLONNETTES ORIENTABLES 4 RT RELAY SOCKETS - 10A WITH DIRECTIONAL POSTS RELAIS MONOSTABLES MODELE H 400 MONOSTABLE RELAYS TYPE H 400 39 (1.535) B A X1 B C X2 D 3 Ensemble de fixation Fixation set 2 35,7 (1.405) 5 (.196) 5,2 (.204) 20 (.787) AIR LB 005516 392 00 18 (.708) 6,8 (.267) M4 1 X2 17,6 (.693) 14 Sockets size 16 16 Contacts with tabs with 2 double coil contacts 14 Sockets size 16 Sliding tab Alveoles 7 x 5 X1 3 x 6,5 (3 x .255) A B C a 3 x 9 (3 x .354) 14 Douilles taille 16 16 Contacts a languettes dont 2 contacts bobine doubles 16 Douilles taille 16 Languette coulissante 29,5 (1.161) A B C a a k 52 (2.047) 62 (2.440) 005510 088 00 3 x M3 3 x M3 Cle 3 Key 3 Avec marquage / With marking * Z 005516 392 00 (E) A 15,9 (.626) Avec ensemble de fixation With fixation set Sans ensemble de fixation Without fixation set Avec ensemble de fixation With fixation set Sans ensemble de fixation Without fixation set 2 X2 1 D Z U B U 05516 392 00 X W C Z V V Y X A X1 W Cle 2 Key 2 Y X W 3 x 5,08 (3 x .200) Sans marquage / Without marking * Cle 3 Key 3 005516 396 00 005519 396 00 C 005517 392 00 (E) 3 x M3 3 x M3 15,9 (.626) Avec ensemble de fixation With fixation set Sans ensemble de fixation Without fixation set V 3 Y U Cle 1 Key 1 3 x 5,08 (3 x .200) : : Cle 2 Key 2 005517 392 00 3 x 5,08 (3 x .200) DIRECTIONAL POSTS COLONNETTES ORIENTABLES Page 67 Page 67 70 Cle 1 Key 1 3 x 5,08 (3 x .200) Reference Part number SOCLES POUR RELAIS 6 RT - 10A A COLONNETTES ORIENTABLES 6 RT RELAY SOCKETS - 10A WITH DIRECTIONAL POSTS RELAIS MONOSTABLES MODELE H 600 24 Sockets size 16 24 Contacts with tabs with 2 double coil contacts Sliding tab Ensemble de fixation Fixation set 3 x 9 (3 x .354) 2 1 B 3 Alveoles 7 x 5 4 A 12,7(.500) 12,7(.500) A B a 39 (1.535) 5 x 6,5 (5 x .255) 24 Douilles taille 16 24 Contacts a languettes dont 2 contacts bobine doubles Languette coulissante 43 (1.692) A B a MONOSTABLE RELAYS MODEL H 600 X1 B C D E X2 5 (.196) 20 (.787) F 36,5 (1.437) Reference Part number : : 17,6 (.693) AIR LB 005516 692 00 18 (.708) 6,8 (.267) 5,2 (.204) M4 a 005510 088 00 k 52 (2.047) 62 (2.440) 005516 692 00 (E) Z 005516 692 00 Sans marquage / Without marking * Avec ensemble de fixation With fixation set Sans ensemble de fixation Without fixation set A W Z Y V Cle 3 Key 3 3Z X V U 005517 692 00 (E) 2 Y U 25,4 (1.000) Avec ensemble de fixation With fixation set Sans ensemble de fixation Without fixation set 4 x M3 4 x M3 Cle 2 Key 2 W Z Y U W1 4V X W Cle 4 Key 4 3 x 5,08 (3 x .200) COLONNETTES ORIENTABLES DIRECTIONAL POSTS Page 67 Page 67 71 X V X Cle 1 Key 1 005517 692 00 Y U 5 x 5,08 (3 x .200) Avec marquage / With marking * SOCLES POUR RELAIS 6 RT-10AA COLONNETTES ORIENTABLES ISOLEES 6 RT RELAY SOCKETS - 10A WITH DIRECTIONAL ISOLATED POSTS RELAIS MONOSTABLES ou BISTABLES MODELE H 600 MONOSTABLE or BISTABLE RELAYS MODEL H 600 39 (1.535) 1 B Ensemble de fixation Fixation set 3 4 A X1 B C D E X2 20 (.787) F 17,6 (.693) AIR LB 005519 692 00 18 (.708) 6,8 (.267) : : 5,2 (.204) 36,5 (1.437) M4 Reference Part number 2 12,7(.500) 12,7(.500) 24 Sockets size 16 24 Contacts with tabs with 2 double coil contacts Sliding tab Alveoles 7 x 5 5 (.196) A B a 3 x 9 (3 x .354) 5 x 6,5 (5 x .255) 24 Douilles taille 16 24 Contacts a languettes dont 2 contacts bobine doubles Languette coulissante 43 (1.692) A B a a 005510 088 00 k 52 (2.047) 62 (2.440) 4 x M3 4 x M3 Z 005519 692 00 (E) 005519 692 00 3Z X V W Z Y Y U X V W Z Y 25,4 (1.000) Avec ensemble de fixation With fixation set Sans ensemble de fixation Without fixation set 2 Y U Cle 3 Key 3 5 x 5,08 (3 x .200) Cle 2 Key 2 A U V X U W1 4V Cle 1 Key 1 Cle 4 Key 4 3 x 5,08 (3 x .200) COLONNETTES ORIENTABLES DIRECTIONAL POSTS Page 67 Page 67 72 X W 7,25 (.285) 30 (1.181) 7,5 (.295) 7,5 (.295) 005518 396 00 30 (1.181) Ensemble Set 44,5 (1.752) 8 (.315) SOCLES POUR RELAIS 4 RT - 10 A AVEC CALE ADAPTATRICE 4 RT RELAY SOCKETS - 10 A WITH ADAPTING SHIM 40(1.574) 62 (2.441) SOCLES MODELE H 40 (1.574) 62 (2.441) ADAPTING SHIM CALE ADAPTATRICE Page 69 Page 69 73 7,25 (.285) 30 (1.181) 7,5 (.295) 7,5 (.295) 30 (1.181) 005518 392 000 44,5 (1.752) Ensemble Set MODEL H SOCKETS BLOCS ECRETEURS CLAMPING CARRIER BLOCKS Clips 5 x 0,8 preisoles renforces NF F00-363 Sealed and reinforced clips .196 x .031 NF F 00-363 Marquage d'identification Identification marking X1 X2 X2 X1 X1 X1 X2 X2 XX-XX 005510 110 04 1,5 KE 130 CA 29,5 (1.161) 11,5 (.452) 11,5 (.452) L 20 (.787) Montage type 1 Type mounting Cable 0,93 mm blanc - L = 90 mm White cable .036 in - L = 3.543 in E 250 - 1 x 0,93 NF F 63-808 Montage type 2 Type mounting Ref. Bloc ecreteur / Clamping carrier block P/N Reference diode / Diode P/N Pour relais / For relays 1 2 1,5 KE 130 CA 72 V 005510 110 04 005510 510 04 1,5 KE 120 CA 72 V 005510 110 05 005510 510 05 1,5 KE 150 CA 72 V 005510 110 06 005510 510 06 1,5 KE 200 CA 1,5 KE 180 CP 1,5 KE 43 CA 110 V 110 V 24 V 005510 110 07 005510 110 08 005510 110 09 005510 510 07 005510 510 08 005510 510 09 ACCESSOIRES ACCESSORIES VIS DE FIXATION MOUNTING SCREW Ensemble de fixation vendue separement L'ensemble comprend : - 2 vis de fixation - 2 ecrous MA Nylstop - 2 rondelles Onduflex - 2 rondelles plates The set includes : 20 - 2 Mounting screws (.787) - 2 MA Nylstop nuts - 2 Onduflex washers - 2 Flat washers M4 Fixation set sold separatly Reference / Part number 005510 088 00 Masse / Weight : 9 g PORTE-ETIQUETTE LABEL HOLDER 29,5 (1.161) Reference / Part number 005510 100 52 Masse / Weight : 5,2 g 11 (.433) 24 (.944) ETIQUETTE HOLDER Reference / Part number 022358 169 98 8,5 (.335) 25 (.984) 74 ADAPTATEUR HERMETIQUE POUR RELAIS 4 RT SEALED ADAPTER FOR 4 RT RELAYS Cet adaptateur pour relais 4 RT a ete developpe par Amphenol Air LB pour remplacer sur des systemes de protection ancienne generation, les relais non etanches par des relais hermetiques de differentes tensions. Ils sont parfaitement interchangeables sans modification des supports d'origine. Amphenol Air LB has developed this adapter to replace former generation protection systems, i.c. to change unsealed relays by sealed ones with different voltages. The new relays are interchangeable with no required modifications of the initial support system. 40,5 maxi 69 maxi CARACTERISTIQUE TECHNIQUES TECHNICAL DATA Boitier : matiere : Contact : matiere : protection : Tension d'utilisation : Intensite : Temperature d'utilisation : Shell : material : Contact : material : protection : Operating voltage : Current : Operating temperature : Thermoplastique noir Exigence 3 suivant NF F 16-102 Alliage de cuivre Contact male etame Contact femelle dore 1500 V 50 Hz 10 A maxi -40C a +120C black thermoplastic exigence 3 complying with NF F 16-102 standard Copper alloy Pin contact tin plated Socket contact gold plated 1500 V 50 Hz 10 A maximum -40C to +120C SCHEMA DE CABLAGE WIRING DIAGRAM SYSTEME DE REFERENCE PART NUMBERING SYSTEM 3405 80kk 316 Adaptateur sans relais 01 Adaptateur avec relais 24 Vcc F470 A 4 A 02 Adaptateur avec relais 110 Vcc F470 A 4 V 03 Capot 3405 0023 316 Adaptateur sans relais ni capot 3405 5000 316 75 Adapter without relay Adapter with 24Vcc F470 A 4 A relay Adapter with 110Vcc F470 A 4 V relay Cover Adapter without relay and cover REFERENTIEL PART NUMBER TABLE Ref. Air LB / Air LB P/N Description Description Page 005510 088 00 ensemble de fixation fixation set 74 005510 100 52 porte etiquette label holder 74 005510 110 04 bloc ecreteur clamping carrier block 74 005510 110 05 bloc ecreteur clamping carrier block 74 005510 110 06 bloc ecreteur clamping carrier block 74 005510 110 07 bloc ecreteur clamping carrier block 74 005510 110 08 bloc ecreteur clamping carrier block 74 005510 110 09 bloc ecreteur clamping carrier block 74 005510 120 00 cale adaptatrice adapting shim 74 005510 510 04 bloc ecreteur clamping carrier block 74 005510 510 05 bloc ecreteur clamping carrier block 74 005510 510 06 bloc ecreteur clamping carrier block 74 005510 510 07 bloc ecreteur clamping carrier block 74 005510 510 08 bloc ecreteur clamping carrier block 74 005510 510 09 bloc ecreteur clamping carrier block 74 005516 392 00 socle pour relais 4 RT 4 RT relay socket 70 005516 396 00 socle pour relais 4 RT - sans marquage avec ensemble de fixation 4 RT relay socket - without marking with fixation set 70 005516 692 00 socle pour relais 6 RT 6 RT relay socket 71 005517 392 00 socle pour relais 4RT 4 RT relay socket 70 005517 692 00 socle pour relais 6RT 6 RT relay socket 71 005518 392 00 socle pour relais 6RT 6 RT relay socket 73 005518 396 00 socle pour relais 4RT 6 RT relay socket 73 005519 692 00 socle pour relais 6RT 6 RT relay socket 72 005519 396 00 socle pour relais 4 RT - sans marquage sans ensemble de fixation 4 RT relay socket - without marking without fixation set 70 022358 169 98 Etiquette Holder 74 3405 80kk 316 adaptateur hermetique sealed adapter 75 76 77 SOCLES POUR RELAIS Connexions pour contacts : fut a souder et broches a piquer sur C.I. RELAY SOCKETS Contact connections : solder cup and PCB pins Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 78 CARACTERISTIQUES TECHNIQUES TECHNICAL DATA MECANIQUE BOITIER Matiere : Thermoplastique noir Exigence 2 CONTACTS Matiere : Alliage cuivreux Protection : Or sur nickel MECHANICAL SHELL Material : Black thermoplastic Exigence 2 CONTACTS Material : Copper alloy Protection : Gold on nickel CLIMATIQUE CLIMATE Temperature d'utilisation : -65C a +150C permanent Operating temperature : -65C to +150C continuously ELECTRICAL ELECTRIQUE DIELECTRIC WITHSTANDING VOLTAGE Sea level : 1 500 V R.M.S. 50 Hz INSULATION RESISTANCE : to 1 000 M MAXIMUM CONTACT CURRENT RATING : size 16 : 13 A size 20 : 7,5 A size 22 : 5 A Tension de tenue Niveau de la mer : 1 500 V eff. 50 Hz RESISTANCE D'ISOLEMENT : a 1 000 M INTENSITE MAXI DU CONTACT : taille 16 : 13 A taille 20 : 7,5 A taille 22 : 5 A MANUFACTURING DATE PERIODE DE FABRICATION Each SOCKET bears the following information : Chaque SOCLE porte les indications suivantes : Trademark : AIR LB Part number : kkkkkk kkk kk Manufacturing date : kk - kk week year Marque : AIR LB Reference : kkkkkk kkk kk Periode de fabrication : kk - kk semaine annee SYSTEME DE REFERENCE PART NUMBER SYSTEM Brochage Pinouts Type de fixation Mounting hardware 79 0015kk kkk kk PLANS DE PERCAGE DRILLING PLANS PERCAGE C.I. PCB DRILLING 20 (.787) 10,4 (.409) SOCLES 2 RT - 5 A 2 RT SOCKETS - 5 A R 1,5 maxi (R .059) O 1 (.039 dia) 3 x 5,08 (3 x .200) O 3,5 (.137 dia) O 3,6 (.141 dia) 27,3(1.075) 5,08 (.200) MONTAGE SUR OU SOUS PLATINE ON OR UNDER PLATE MOUNTING 27,3 (1.074) O 3,6 (.141 dia) R 0,13 maxi (R .005) O 1,4 (.055 dia) 3 x 5,08 (3 x .200) 5,08 (.200) SOCLES 2 RT - 10 A 2 RT SOCKETS - 10 A 14 (.551) 28,2 (1.110) O 3,6 (.141 dia) 35,7 (1.405) 35,7 (1.405) 28,2 (1.110) 3 x 5,08 (3 x .200) 3 x 5,08 (3 x .200) R 0,13 maxi (R .005) O 1,4 (.055 dia) 16 (.630) 26,2 (1.031) SOCLES 4 RT - 10 A 4 RT SOCKETS - 10 A 16 (.630) O 3,6 (.141 dia) O 3,6 (.141 dia) 35,7 (1.405) 35,7 (1.405) O 1,4 (.055 dia) 25,4 (1.000) 5 x 5,08 (5 x .200) 3 x 5,08 (3 x .200) SOCLES 6 RT - 10 A 6 RT SOCKETS - 10 A O 3,6 (.141 dia) 80 36,5 (1.437) SOCLES POUR RELAIS 2 RT - 5 A - A PIQUER SUR C.I. 2 RT RELAY SOCKETS - 5 A - PCB RELAIS MONOSTABLES 4,1 (.161) MONOSTABLE RELAYS A B O 0,8 (.031 dia) 2 x M3 3 x 5,08 (3 x .200) 2 X2 1 10,2 (.401) 3 5,08 (.200) B A B 2 (.078) 9,1 (.358) 5,6 (.220) 4,1 (.161) 2,8 (.110) 11,2 (.441) 27,3 (1.075) A X1 34 (1.338) 8 Broches O 0,8 mm 8 Douilles a piquer sur C.I. O 0,8 etamees A B ARRANGEMENT 8 Pins O .031 inch 8 Sockets for PCB O .031 inch LAYOUT Avec marquage with marking 001544 205 19 Sans marquage without marking 001548 205 19 3 2 X2 B A X1 81 1 SOCLES POUR RELAIS 2 RT - 5 A - A PIQUER SUR C.I. 2 RT RELAY SOCKETS - 5 A - PCB RELAIS MONOSTABLES MONOSTABLE RELAYS 6,9 (.271) A 9,1 (.358) 5,6 (.220) 2 (.078) B 4,1 (.161) 2,8 (.110) 14 (.551) 27,3 (1.075) O 0,8 (.031 dia) 2 x M3 3 x 5,08 (3 x .200) 2 X2 1 10,2 (.401) 3 5,08 (.200) B A B A X1 34 (1.338) 8 Broches O 0,8 mm 8 Douilles a piquer sur C.I. O 0,8 etamees A B ARRANGEMENT Avec marquage with marking Sans marquage without marking 8 Pins O .031 inch 8 Sockets for PCB O .031 inch LAYOUT 001544 215 19 3 2 X2 B 001548 215 19 A X1 82 1 SOCLES POUR RELAIS 2 RT - 5 A - A FUT A SOUDER 2 RT RELAY SOCKETS - 5 A - SOLDER CUP RELAIS MONOSTABLES MONOSTABLE RELAYS 27,3 (1.075) 6,4 9,1 (.358) (.252) A 5,6 (.220) 7,6 (.300) B 4 (.157) Trou O 1,2 (hole .047 dia) 2 (.078) M3 A B 10,2 (.401) 5,08 (.200) 3 x 5,08 (3 x .200) 34 (1.338) 8 Broches O 0,8 mm 8 Douilles a fut a souder O 1,2 A B 8 Pins O .031 inch 8 Sockets for solder cup O .047 inch Livre avec rondelle plate et ecrou Polystop M3 Delivered with washer and Polystop M3 nut ARRANGEMENT LAYOUT Avec marquage with marking Sans marquage without marking 001510 251 98 001511 251 98 83 SOCLES POUR RELAIS 2 RT - 10 A - A PIQUER SUR C.I. 2 RT RELAY SOCKETS - 10 A - PCB RELAIS MONOSTABLES MONOSTABLE RELAYS 12,5 (.492) M3 A 3 (.118) 2,5 (.098) 0,8 (.031) 4,2 B (.165) O 1,2 (.047 dia) a 3 x 5,08 (3 x .200) 2 X2 1 B A 5,08 (.200) A B a 2 x M3 13,2 (.519) 3 16,4 (.645) 5 (.196) 35,7 (1.405) X1 44 (1.732) 8 Broches O 1,57 mm 8 Douilles a piquer sur C.I. O 1,2 etamees Detrompeur O 2 mm A B a ARRANGEMENTS 8 Pins O .061 inch 8 Sockets for PCB O .047 inch Polarising hole O .078 inch LAYOUTS 8 Contacts 3 2 6 Contacts X2 1 B A X1 Avec marquage with marking Sans marquage without marking 2 X2 3 1 B Cle 1 Cle 2 A 3402 8017 301 X2 1 Cle 2 A X1 Codage / Encoding System cle / key cle / key 1 2 Z 2 B X1 Ref. / P/N 3402 8018 301 001549 351 19 3 Cle 1 Avec marquage with marking 001544 351 19 Y Codage / Encoding System cle / key cle / key 1 2 Marquage Marking Ref. / P/N ZY 3402 8016 301 Z Y ZY 2402 8020 301 X Y XY 84 Marquage Marking SOCLES POUR RELAIS 2 RT - 10 A - A PIQUER SUR C.I. 2 RT RELAY SOCKETS - 10 A - PCB RELAIS MONOSTABLES MONOSTABLE RELAYS 35,7 (1.405) 4,2 (.165) 10,5 (.413) A 3 x 5,08 (3 x .200) a 3 2 X2 1 13,2 (.519) 5,08 (.200) 2,1 (.082) B O 1,2 (.047 dia) B A X1 44 (1.732) A B a 8 Broches O 1,57 mm 8 Douilles a piquer sur C.I. O 2,1 mm etamees Detrompeur O 2 mm TYPE DE FIXATION A B a 8 Pins O .061 inch 8 Sockets for solder cup O .082 inch Polarising hole O .078 inch FIXING TYPE 02 Sur platine On plate ARRANGEMENTS Avec marquage with marking Sans marquage without marking Avec marquage with marking Sans marquage without marking LAYOUTS 3 001500 821 kk 3 001501 818 kk 2 X2 1 B A 001501 817 kk Sans marquage without marking 1 X1 001500 817 kk 001500 818 kk X2 A 001501 821 kk Avec marquage with marking 2 B X1 3 2 X2 B A X1 85 1 SOCLES POUR RELAIS 2 RT - 10 A - A FUT A SOUDER 2 RT RELAY SOCKETS - 10 A - SOLDER CUP RELAIS MONOSTABLES MONOSTABLE RELAYS 35,7 (1.405) 5,3 (.208) 10,5 (.413) A 2,1 (.082) Trous O 2,1 (hole .082 dia) B 3 x 5,08 (3 x .200) a 2 X2 1 13,2 (.519) 5,08 (.200) 3 B A X1 44 (1.732) A B a Broches O 1,57 mm Douilles a fut a souder O 2,1 mm Detrompeur O 2 mm TYPE DE FIXATION A B a 02 05 02 Sur platine On plate Sous platine Under plate FIXING TYPE ARRANGEMENTS Avec marquage with marking Sans marquage without marking Avec marquage with marking Sans marquage without marking Avec marquage with marking Sans marquage without marking Pins O .061 inch Sockets for solder cup O .082 inch Polarising hole O .078 inch LAYOUTS 3 001500 311 kk 2 X2 1 B A 001501 311 kk X1 3 001500 317 kk 2 X2 1 B A 001501 317 kk X1 3 001500 318 kk 2 X2 B A 001501 318 kk X1 86 1 SOCLES POUR RELAIS 4 RT - 10 A - A PIQUER SUR C.I. 4 RT RELAY SOCKETS - 10 A - PCB MONOSTABLE RELAYS RELAIS MONOSTABLES 5 (.196) 35,7 (1.405) 12,5 (.492) M3 16,4 (.645) A 2,5 (.098) 3 (.118) 3 x M3 0,8 (.031) 4,2 B (.165) O 1,2 (.047 dia) 3 x 5,08 (3 x .200) a 3 2 X2 1 25,4 (1.000) D Y1 C B A 3 x 5,08 (3 x .200) A B a X1 27,3 (1.075) 16 Broches O 1,57 mm 16 Douilles a piquer sur C.I. O 2,1 mm etamees Detrompeur O 2 mm A B a 44 (1.732) ARRANGEMENTS 16 Pins O .061 inch 16 Sockets for PCB O .082 inch Polarising hole O .078 inch LAYOUTS 16 Contacts 3 2 X2 14 Contacts 3 1 X2 2 1 D D Y1 Y1 C C B B A A X1 X1 Avec marquage / with marking 001544 316 19 Avec marquage / with marking 001544 305 19 Sans marquage / without marking 001547 316 19 Sans marquage / without marking 001547 305 19 14 Contacts 10 Contacts 3 Cle 3 Cle 3 2 X2 1 D Y1 C Cle 1 Cle 1 B Cle 2 Cle 2 A X1 Ref. / P/N 3404 8016 301 3404 8017 301 3404 8019 301 3404 8022 301 3404 8023 301 3404 8024 301 3404 8026 301 3404 8027 301 3404 8030 301 Codage / Encoding System cle / key cle / key cle / key 1 2 3 U U U W U U Z U W V U U W U W Z W Y X U U W Y U U Z X Marquage Marking Ref. / P/N UUU WUU ZUW VUU WUW ZWY XUU WYU UZX 3404 8014 301 3404 8015 301 3404 8021 301 87 Codage / Encoding System cle / key cle / key cle / key 1 2 3 Z Y Y U Y Y X Y Y Marquage Marking ZYY UYY XYY SOCLES POUR RELAIS 4 RT - 10 A - A FUT A SOUDER 4 RT RELAY SOCKETS - 10 A - SOLDER CUP MONOSTABLE RELAYS RELAIS MONOSTABLES 35,7 (1.405) 5,3 (.208) 10,5 (.413) A 2,1 (.082) Trou O 2,1(hole .082 dia) B a 3 x 5,08 (3 x .200) 3 X2 2 1 25,4 (1.000) D Y1 C B A 3 x 5,08 (3 x .200) X1 27,3 (1.075) 44 (1.732) A B a Broches O 1,57 mm Douilles a fut a souder O 2,1 mm Detrompeur O 2 mm TYPE DE FIXATION A B a 02 05 FIXING TYPE 02 Sur platine On plate Pins O .061 inch Sockets for solder cup O .082 inch Polarising hole O .078 inch Sous platine Under plate ARRANGEMENTS LAYOUTS 3 2 X2 1 D Avec marquage with marking 001500 316 kk Sans marquage without marking 001501 316 kk Y1 14 Contacts C B A X1 3 Avec marquage with marking Sans marquage without marking 2 X2 1 D 001500 312 kk Y1 14 Contacts C B 001501 312 kk A X1 3 Avec marquage with marking Sans marquage without marking 2 X2 1 D 001500 361 kk Y1 C 001501 361 kk B A X1 88 16 Contacts SOCLES POUR RELAIS 4 RT 10 A - A PIQUER SUR C.I. 4 RT RELAY SOCKETS - 10 A - PCB RELAIS MONOSTABLES MONOSTABLE RELAYS 35,7 (1.405) 4,2 (.165) 10,5 (.413) A B O 1,2 (.047 dia) 2,1 (.082) a 3 x 5,08 (3 x .200) 33 22 X2 X2 11 25,4 (1.000) DB Y1 CA X1 B A 3 x 5,08 (3 x .200) X1 27,3 (1.075) 44 (1.732) A B a Broches O 1,57 mm Douilles a piquer sur C.I. O 1,2 mm etamees Detrompeur O 2 mm TYPE DE FIXATION A B a 02 Pins O .061 inch Sockets for PCB O .047 inch Polarising hole dia .078 inch FIXING TYPE Sur platine On plate ARRANGEMENTS LAYOUTS 3 2 X2 1 D Avec marquage with marking 001500 816 kk Sans marquage without marking 001501 816 kk 14 Contacts Y1 C B A X1 3 2 X2 1 D Avec marquage with marking 001500 822 kk Sans marquage without marking 001501 822 kk 14 Contacts Y1 C B A X1 3 2 X2 1 D Avec marquage with marking 001500 861 kk Sans marquage without marking 001501 861 kk Y1 C B A X1 89 16 Contacts SOCLES POUR RELAIS 6 RT 10 A - A PIQUER SUR C.I. 6 RT RELAY SOCKETS - 10 A - PCB RELAIS MONOSTABLES 5 (.196) MONOSTABLE RELAYS 7,5 (.295) 36,5 (1.437) 3 0,8 (.031) (.118) 4,2 (.165) 4 x M3 16,4 (.645) A B O 1,2 (.047 dia) 3 x 5,08 (3 x .200) 3 2 X2 1 A 37,7 (1.484) B C D 5 x 5,08 (5 x .200) E A B F X1 27,3 (1.075) 44 (1.732) Broches O 1,57 mm Douilles a piquer sur C.I. O 1,2 mm etamees A B ARRANGEMENTS Pins O .061 inch Sockets for PCB O .047 inch LAYOUTS 3 2 X2 1 A B Avec marquage with marking 001544 609 19 Sans marquage without marking 001549 609 19 20 Contacts C D E F X1 3 2 X2 1 A Avec marquage with marking 001544 611 19 Sans marquage without marking 001549 611 19 B 16 Contacts C D E F X1 3 2 X2 1 A B Avec marquage with marking 001544 610 19 Sans marquage without marking 001549 610 19 14 Contacts C D E F X1 90 REFERENTIEL PART NUMBER TABLE Ref. Air LB / Air LB P/N Description 2RT relay socket 4RT relay socket 4RT relay socket 2RT relay socket 2RT relay socket 4RT relay socket 4RT relay socket 2RT relay socket 2RT relay socket 2RT relay socket 4RT relay socket 4RT relay socket 2RT relay socket 4RT relay socket 4RT relay socket 2RT relay socket 2RT relay socket 4RT relay socket 2 RT relay socket 4RT relay socket 2RT relay socket 2RT relay socket 2RT relay socket 4RT relay socket 4RT relay socket 2 RT relay socket 2 RT relay socket 2 RT relay socket 4RT relay socket 4RT relay socket 2 RT relay socket 6RT relay socket 6RT relay socket 4RT relay socket 4RT relay socket 2 RT relay socket 2 RT relay socket 2 RT relay socket 6RT relay socket 6RT relay socket 6RT relay socket 2 RT relay socket 2 RT relay socket 2 RT relay socket 2 RT relay socket 4RT relay socket 4RT relay socket 4RT relay socket 4RT relay socket Page 001547 305 19 001547 316 19 001548 205 19 001548 215 19 001549 351 19 001549 609 19 001549 610 19 001549 611 19 3402 8016 301 3402 8017 301 3402 8018 301 3402 8020 301 3404 8014 301 3404 8015 301 3404 8016 301 3404 8017 301 Description socle pour relais 2 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 6 RT socle pour relais 6 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 6 RT socle pour relais 6 RT socle pour relais 6 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 2 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 4 RT socle pour relais 4 RT 3404 8019 301 socle pour relais 4 RT 4RT relay socket 87 3404 8021 301 socle pour relais 4 RT 4RT relay socket 87 3404 8022 301 socle pour relais 4 RT 4RT relay socket 87 3404 8023 301 socle pour relais 4 RT 4RT relay socket 87 3404 8024 301 socle pour relais 4 RT 4RT relay socket 87 3404 8026 301 socle pour relais 4 RT 4RT relay socket 87 3404 8027 301 socle pour relais 4 RT 4RT relay socket 87 3404 8030 301 socle pour relais 4 RT 4RT relay socket 87 001500 311 kk 001500 312 kk 001500 316 kk 001500 317 kk 001500 318 kk 001500 361 kk 001500 816 kk 001500 817 kk 001500 818 kk 001500 821 kk 001500 822 kk 001500 861 kk 001501 311 kk 001501 312 kk 001501 316 kk 001501 317 kk 001501 318 kk 001501 361 kk 001510 251 98 001501 816 kk 001501 817 kk 001501 818 kk 001501 821 kk 001501 822 kk 001501 861 kk 001511 251 98 001544 205 19 001544 215 19 001544 305 19 001544 316 19 001544 351 19 001544 609 19 001544 610 19 81 86 88 88 85 86 88 88 89 85 85 89 89 86 88 88 85 86 88 83 85 89 85 85 85 89 83 81 82 87 87 84 90 90 87 87 81 82 84 90 90 90 84 84 84 84 87 87 87 87 ACCESSOIRES DE CABLAGE COLLIERS SERRE CABLES CABLE ACCESSORIES CABLES CLAMPS Amphenol Air LB SYSTEMES DE CONNEXIONS ELECTRIQUES ET ELECTRONIQUES ELECTRIC AND ELECTRONIC CONNECTION SYSTEMS 92 PRESENTATION PRESENTATION Fixation des colliers de cheminement sur panneaux par vis. Protection des torons de cables aux vibrations par l'elastomere surmoule. Fermeture des colliers de cheminement par frette. Application pour tous secteurs industriels. Colliers de cheminement disponibles en huit tailles pour les diametres 5 a 48mm. 08 07 Fixing of cable clamp on wall by screw. Protection of electrical bundle with vibration by over mold elastomer. Closing of the cable clamp by a cable tie. Application for all industrials ways.Cable clamp avaible in eight sizes for diameters 0.2 to 1.88 inch. 06 05 04 03 02 01 NOMENCLATURE DESCRIPTION 4 1 Vis (non fournie) 2 Collier de cheminement 3 Protection elastomere 4 Frette (non fournie) 1 Screw (not supplied) 3 2 Cable clamp 2 4 Cable tie (not supplied) 3 Elastomer protection 1 CARACTERISTIQUES TECHNIQUES TECHNICAL DATA Matiere : Thermoplastique naturel PA 6.6 Material : Natural thermoplastic PA 6.6 Protection elastomere : Silicone bleu Elastomer protection : Blue silicone Couple de serrage maxi: 0,54 m.daN Tightening torque maxi: 21.25 inch. daN Tenue en temperature: -55C a +150C Operating temperature: -55C to +150C 93 COLLIERS SERRE CABLES CABLES CLAMPS References Part numbers Taille Size 003262 701 00 003262 702 00 003262 703 00 003262 704 00 003262 705 00 003262 706 00 003262 707 00 003262 708 00 T1 T2 T3 T4 T5 T6 T7 T8 OC Cable admissible Cable allowable E Entraxe Centre to centre L Longueur Width H Hauteur Height D Epaisseur Thickness Masse Weight mm inch mm inch mm inch mm inch mm inch g 5a7 7 a 10 10 a 14 14 a 19,5 19,5 a 26,5 26,5 a 35 35 a 45 39,5 a 48 0.2 to 0.28 0.28 to 0.4 0.4 to 0.55 0.55 to 0.77 0.77 to 1.05 1.05 to 1.38 1.38 to 1.77 1.55 to 1.88 17 18,5 20,4 23,05 26,75 31 36 40 0.67 0.73 0.80 0.91 1.05 1.22 1.42 1,57 34,8 37,9 41,5 47,5 54,4 62,7 72,3 81,5 1.37 1.49 1.63 1.87 2.14 2.47 2.85 2.86 15,4 18,7 23 28,8 36 45 54,9 63,7 0.61 0.74 0.91 1.14 1.42 1.77 2.16 2.50 3,5 3,5 3,5 3,5 3,5 5,8 8,4 8,3 0.14 0.14 0.14 0.14 0.14 0.23 0.33 0.32 2,2 2,7 3,3 4,2 5,5 8,6 12 14,7 Tolerance generale en reference JS15, masse 10 % Pour toutes autres definitions, merci de nous consulter. General tolerance according to JS15, Weight 10 %. For all others defenitions, please contact us. . 94 95 PROCEDURE DE CABLAGE POUR CONTACTS A SERTIR WIRING INSTRUCTIONS FOR CRIMP CONTACTS Les outils de mise en oeuvre ont un role preponderant dans la phase de cablage. Il est imperatif qu'ils soient en excellent etat. Un outil ebreche, mal regle, nuira a la qualite ainsi qu'aux caracteristiques des produits Amphenol Air LB. L'insertion et l'extraction des contacts s'effectuent avec des outils plastiques ou metalliques. Wiring tools are most important. It is imperative that they are in good condition. A chipped or badly adjusted tool will affect the quality as well as the characteristics of Amphenol Air LB products. Insertion and extraction of contacts are done with plastic or metallic tools. SERTISSAGE CRIMPING 1 1 Les cables doivent etre denudes au moyen d'un outil approprie pour eviter de blesser l'ame et la gaine isolante. Denuder le cable sur une longueur correspondant a la cote de percage du fut de contact. The cables must be stripped with a suitable tool to avoid damaging the core and the insulating sheath. Strip the cable over a length corresponding to the drilling dimension of the cup. Positionneur Locator 1 2 Pince a sertir Crimping tool 2 Le sertissage des contacts sur le cable s'effectue avec un outil de sertissage complete d'un positionneur regle pour la taille du contact. L'outil doit etre conforme a la norme MIL C 22520. 2 The crimping of contacts on the cable is done with a crimping tool complete with a locator adjusted to the contact size. The tool must comply with MIL C 22520 standard. 3 En fonction du jeu entre le diametre de l'ame du cable et le diametre du fut du contact, deux possibilites se presentent : 3 According to the space between the cable diameter and the cup diameter, one of two ways of crimping must be choosen : 1-jeu important : mettre le contact dans les mors de l'outil, le fut etant place vers l'operateur, inserer le cable denude dans le fut du contact. 1-important space : place the contact in the jaws of the tool with the cup toward the operator.Insert the stripped cable in the contact cup. 2-jeu faible : placer le cable dans le fut du contact et inserer l'ensemble dans le mors de l'outil. 4 La pince ne liberera le contact que lorsque le cycle de sertissage complet aura ete effectue 2-low space : place the cable in the contact cup and insert the group in the jaws of the tool. 4 a - Le cable doit apparaitre dans le trou de regard du contact, il indique que le cable est correctement presente au sertissage. The tool will not release the contact until the crimping is fully completed 4 a 3 a - The cable must be visible through the peep hole thus ensuring that it is correctly crimped. CONTACT INSERTION INSERTION CONTACT The contact insertion is made with the tool COLOUR side according to the contact sizes. L'insertion des contacts s'effectue avec l'outil cote COULEUR qui correspond a la taille des contacts. 1 2 Tenir l'outil et inserer le cable dans la gorge longitudinale de l'outil. Tirer le fil vers l'arriere a travers l'outil jusqu'a ce que l'extremite de l'outil repose sur l'epaulement de la collerette du contact. 1 1 Hold the tool and insert the cable into the longitudinal groove. 2 Pull the cable to the rear of the tool until the end of the tool is resting on the contact shoulder. 2 Cote couleur Colour side 96 4 3 5 2 1 3 97 REFERENTIEL GENERAL GENERAL PART NUMBER TABLE Ref. Air LB / Air LB P/N DESCRIPTION DESCRIPTION Page 001100 232 00 pochette outils metalliques droits insert+extract taille 20 straight insert.+extract. metallic tool size 20 in pocket 9 001100 332 00 pochette outils metalliques droits insert+extract taille 16 straight insert.+extract. metallic tool size 16 in pocket 9 001100 432 00 pochette outils metalliques droits insert+extract taille 12 straight insert.+extract. metallic tool size 12 in pocket 9 001100 230 00 pochette outils metalliques coudes insert+extract taille 20 angled insert.+extract. metallic tool size 20 in pocket 9 001100 330 00 pochette outils metalliques coudes insert+extract taille 16 angled insert.+extract. metallic tool size 16 in pocket 9 001100 430 00 pochette outils metalliques coudes insert+extract taille 12 angled insert.+extract. metallic tool size 12 in pocket 9 001104 200 04 contact male taille 20 pin contact size 20 8 001104 300 04 contact male taille 16 pin contact size 16 8 001104 400 04 contact male taille 12 pin contact size 12 8 001109 200 42 Obturateur d'etancheite taille 20 Sealing plug size 20 8-58 001109 210 42 obturateur d'etancheite taille 20 sealing plug size 20 27 001109 300 40 Obturateur d'etancheite taille 16 Sealing plug size 16 8-27-58 001109 400 41 Obturateur d'etancheite taille 12 Sealing plug size 12 8-27-58 001109 600 00 obturateur taille 10 sealing plug size 10 8-27 001111 200 02 prise de test taille 20 test plug size 20 9 001111 300 02 prise de test taille 16 test plug size 16 9 001111 400 02 prise de test taille 12 test plug size 12 9 001112 300 25 outil plastique insertion/extraction taille 16 insertion/extraction plastic tool size 16 9 001112 400 25 outil plastique insertion/extraction taille 12 insertion/extraction plastic tool size 12 9 001119 203 04 prolongateur taille 20 splice size 20 16 001119 302 04 prolongateur taille 16 splice size 16 16 001500 311 ** socle pour relais 2 RT 2RT relay socket 86 001500 312 ** socle pour relais 4 RT 4RT relay socket 88 001500 316 ** socle pour relais 4 RT 4RT relay socket 88 001500 317 ** socle pour relais 2 RT 2RT relay socket 85 001500 318 ** socle pour relais 2 RT 2RT relay socket 86 001500 361 ** socle pour relais 4 RT 4RT relay socket 88 88 001500 816 ** socle pour relais 4 RT 4RT relay socket 001500 817 ** socle pour relais 2 RT 2RT relay socket 89 001500 818 ** socle pour relais 2 RT 2RT relay socket 85 001500 821 ** socle pour relais 2 RT 2RT relay socket 85 001500 822 ** socle pour relais 4 RT 4RT relay socket 89 001500 861 ** socle pour relais 4 RT 4RT relay socket 89 001501 311 ** socle pour relais 2 RT 2RT relay socket 86 001501 312 ** socle pour relais 4 RT 4RT relay socket 88 001501 316 ** socle pour relais 4 RT 4RT relay socket 88 001501 317 ** socle pour relais 2 RT 2RT relay socket 85 001501 318 ** socle pour relais 2 RT 2RT relay socket 86 88 001501 361 ** socle pour relais 4 RT 4RT relay socket 001510 251 98 socle pour relais 2 RT 2 RT relay socket 83 001501 816 ** socle pour relais 4 RT 4RT relay socket 85 001501 817 ** socle pour relais 2 RT 2RT relay socket 89 001501 818 ** socle pour relais 2 RT 2RT relay socket 85 001501 821 ** socle pour relais 2 RT 2RT relay socket 85 001501 822 ** socle pour relais 4 RT 4RT relay socket 85 001501 861 ** socle pour relais 4 RT 4RT relay socket 89 001511 251 98 socle pour relais 2 RT 2 RT relay socket 83 98 Ref. Air LB / Air LB P/N DESCRIPTION DESCRIPTION Page 001544 205 19 001544 215 19 socle pour relais 2 RT socle pour relais 2 RT 2 RT relay socket 2 RT relay socket 81 001544 305 19 socle pour relais 4 RT 4RT relay socket 87 001544 316 19 socle pour relais 4 RT 4RT relay socket 87 001544 351 19 socle pour relais 2 RT 2 RT relay socket 84 001544 609 19 socle pour relais 6 RT 6RT relay socket 90 001544 610 19 socle pour relais 6 RT 6RT relay socket 90 001547 305 19 socle pour relais 4 RT 4RT relay socket 87 001547 316 19 socle pour relais 4 RT 4RT relay socket 87 001548 205 19 socle pour relais 2 RT 2 RT relay socket 81 001548 215 19 socle pour relais 2 RT 2 RT relay socket 82 001549 351 19 socle pour relais 2 RT 2 RT relay socket 84 001549 609 19 socle pour relais 6 RT 6RT relay socket 90 001549 610 19 socle pour relais 6 RT 6RT relay socket 90 001549 611 19 001704 202 92 socle pour relais 6 RT 6RT relay socket 90 contact femelle taille 20 socket contact size 20 27 001704 205 92 Contact femelle taille 20 Socket contact size 20 58 001704 302 02 Contact femelle taille 16 Socket contact size 16 58 001704 302 92 Contact femelle taille 16 Socket contact size 16 27-58 001704 400 92 001704 600 92 Contact femelle taille 12 contact femelle taille 10 Socket contact size 12 socket contact size 10 27-58 001714 202 92 contact male taille 20 pin contact size 20 27 001714 205 92 Contact male taille 20 Pin contact size 20 58 001714 302 02 Contact male taille 16 Pin contact size 16 58 001714 302 92 001714 320 92 Contact male taille 16 contact male taille 16 Pin contact size 16 pin contact size 16 27 001714 400 92 001714 600 92 Contact male taille 12 contact male taille 10 Pin contact size 12 pin contact size 10 27-58 001751 1** ** rail metallique metallic rail 10 001751 6** ** rail composite composite rail 11 001752 100 98 planche etiquettes vierges PVC blank sheet of tags in PVC 12 82 27 58 27 001752 500 98 planche etiquettes vierges PFTE blank sheet of tags in PFTE 12 001765 201 77 Module porte composants - contacts taille 20 Component carrier module - contacts #20 15 001777 201 04 module etanche taille 20 sealed module size 20 13 001777 202 04 module etanche taille 20 sealed module size 20 13 001777 203 04 module etanche taille 20 sealed module size 20 13 001777 204 04 module etanche taille 20 sealed module size 20 13 001777 205 04 module etanche taille 20 sealed module size 20 13 001777 306 04 module etanche taille 16 sealed module size 16 13 001777 401 04 module etanche taille 12 sealed module size 12 14 001777 402 04 module etanche taille 12 sealed module size 12 14 001777 403 04 module etanche taille 12 sealed module size 12 14 001777 501 04 module etanche heterogene sealed mixed module 14 001777 503 04 module etanche heterogene sealed mixed module 14 001777 504 04 module etanche heterogene sealed mixed module 14 001777 601 04 module etanche heterogene sealed mixed module 14 001777 271 04 module etanche taille 20 a picots droits sealed module size 20 to be solder on PCB 14 001777 206 04 module etanche taille 20 sealed module size 20 13 001777 207 04 module etanche taille 20 sealed module size 20 13 001777 208 04 module etanche taille 20 sealed module size 20 13 001777 209 04 module etanche taille 20 sealed module size 20 13 001777 211 04 module etanche taille 20 sealed module size 20 13 001777 301 04 module etanche taille 16 sealed module size 16 13 001777 302 04 module etanche taille 16 sealed module size 16 13 001777 303 04 module etanche taille 16 sealed module size 16 13 001777 304 04 module etanche taille 16 sealed module size 16 13 001777 305 04 001901 001 00 module etanche taille 16 cle de serrage de l'ecrou fendu male sealed module size 16 key for mating pin split nut 13 001901 040 00 manchon d'etancheite sealing sleeve 26 001901 050 00 serre-cables droit straight cable clamp 26 28 001901 051 00 serre-cables coude angled cable clamp 26 001901 052 00 serre-cables droit taille 8 straight cable clamp size 8 26 001901 053 00 serre-cables coude taille 8 angled cable clamp size 8 26 001901 176 07 detrompeur femelle socket polarizer 25 001901 186 07 detrompeur male pin polarizer 25 001901 *** 00 outil extracteur extraction tool 28 002013 000 61 cle de serrage accouplement key for mating of connector 28 99 Ref. Air LB / Air LB P/N DESCRIPTION DESCRIPTION Page 003262 701 00 Collier serre cables taille 1 Cables clamp size 1 94 003262 702 00 Collier serre cables taille 2 Cables clamp size 2 94 003262 703 00 Collier serre cables taille 3 Cables clamp size 3 94 003262 704 00 Collier serre cables taille 4 Cables clamp size 4 94 003262 705 00 Collier serre cables taille 5 Cables clamp size 5 94 003262 706 00 Collier serre cables taille 6 Cables clamp size 6 94 003262 707 00 Collier serre cables taille 7 Cables clamp size 7 94 003262 708 00 005510 088 00 Collier serre cables taille 8 ensemble de fixation Cables clamp size 8 94 fixation set 74 005510 100 52 porte etiquette label holder 74 005510 110 04 bloc ecreteur clamping carrier block 74 005510 110 05 bloc ecreteur clamping carrier block 74 005510 110 06 bloc ecreteur clamping carrier block 74 005510 110 07 bloc ecreteur clamping carrier block 74 005510 110 08 bloc ecreteur clamping carrier block 74 005510 110 09 bloc ecreteur clamping carrier block 74 005510 120 00 cale adaptatrice adapting shim 74 005510 510 04 bloc ecreteur clamping carrier block 74 005510 510 05 bloc ecreteur clamping carrier block 74 005510 510 06 bloc ecreteur clamping carrier block 74 005510 510 07 bloc ecreteur clamping carrier block 74 005510 510 08 bloc ecreteur clamping carrier block 74 005510 510 09 bloc ecreteur clamping carrier block 74 005516 392 00 socle pour relais 4 RT 4 RT relay socket 70 005516 396 00 socle pour relais 4 RT - sans marquage - avec ensemble de fixation 4 RT relay socket - without marking - with fixation set 70 005516 692 00 socle pour relais 6 RT 6 RT relay socket 71 005517 392 00 socle pour relais 4RT 4 RT relay socket 70 005517 692 00 socle pour relais 6RT 6 RT relay socket 71 005518 392 00 socle pour relais 6RT 6 RT relay socket 73 005518 396 00 socle pour relais 4RT 6 RT relay socket 73 005519 692 00 socle pour relais 6RT 6 RT relay socket 72 005519 396 00 socle pour relais 4 RT - sans marquage - sans ensemble de fixation 4 RT relay socket - without marking - without fixation set 70 006101 000 00 Outil d'extraction des modules Tool for extraction of modules 61 006101 001 00 Outil pour verrouillage des connecteurs Tool for locking of connectors 61 006101 002 00 Outil pour fixation des accessoires Tool for locking of accessories 61 006101 003 00 Outil pour reindexation des noix de detrompage par l'avant Tool for angular modification of polarizing nuts by the front 61 006101 004 00 Outil pour extraction des cles de detrompage Tool for extraction of polarizing keys 61 006101 005 00 Outil pour montage des noix de detrompage par l'avant Tool for assembly of polarizing nuts by the front 61 61 006101 006 00 Outil d'insertion des modules Tool for insertion of modules 006101 008 00 Outil d'extraction des modules RJ45 Tool for extraction of RJ45 modules 61 006114 051 18 Cheminee cylindrique Cylindrical pipe 45-46 006114 052 18 Cheminee ovale Oval pipe 45 006114 200 01 Cle de detrompage code A polarizing key code A 47 006114 200 02 Cle de detrompage code B polarizing key code B 47 006114 200 03 Cle de detrompage code C polarizing key code C 47 47 006114 200 04 Cle de detrompage code D polarizing key code D 006114 200 05 Cle de detrompage code E polarizing key code E 47 006114 200 06 Cle de detrompage code F polarizing key code F 47 006114 200 07 Cle de detrompage code G polarizing key code G 47 006114 210 01 Noix de detrompage code A polarizing nut code A 47 006114 210 02 Noix de detrompage code B polarizing nut code B 47 006114 210 03 Noix de detrompage code C polarizing nut code C 47 006114 210 04 Noix de detrompage code D polarizing nut code D 47 006114 210 05 Noix de detrompage code E polarizing nut code E 47 006114 210 06 Noix de detrompage code F polarizing nut code F 47 006114 210 07 01977 21* 00 Noix de detrompage code G connecteur femelle taille 20 polarizing nut code G socket connector size 20 22 23 47 01977 22* 00 connecteur male taille 20 pin connector size 20 01977 31* 00 connecteur femelle taille 16 socket connector size 16 22 01977 32* 00 connecteur male taille 16 pin connector size 16 23 01977 41* 00 connecteur femelle taille 12 socket connector size 12 22 01977 42* 00 connecteur male taille 12 pin connector size 12 23 01977 61* 00 connecteur femelle taille 10 socket connector size 10 22 01977 62* 00 connecteur male taille 10 pin connector size 10 23 01977 71* 00 connecteur femelle taille 8 socket connector size 8 22 01977 72* 00 connecteur male taille 8 pin connector size 8 23 022358 169 98 Etiquette Holder 74 100 Ref. Air LB / Air LB P/N DESCRIPTION DESCRIPTION Page 3350 0892 345 Cape de protection ESD (2 modules) ESD protection cover (2 modules) 61 3350 0894 34 Cape de protection ESD (4 modules) ESD protection cover (4 modules) 61 3350 0892 504 Cape de protection fiches et embases (2 modules) Receptacles and plugs protection cover (2 modules) 61 3350 0894 504 Cape de protection fiches et embases (4 modules) Receptacles and plugs protection cover (4 modules) 61 3350 0896 345 Cape de protection ESD 4 modules (2 pieces) 4 modules ESD protection cover (2 pieces) 61 3350 0896 504 Cape de protection standard 4 modules (2 pieces) 4 modules standard protection cover (2 pieces) 61 3350 0899 345 Cape de protection ESD 2 modules (2 pieces) 2 modules ESD protection cover (2 pieces) 61 3350 0899 504 Cape de protection standard 2 modules (2 pieces) 2 modules standard protection cover (2 pieces) 61 3350 5234 020 Bouchon d'embase receptacle cover 45 3351 6012 *** capot de protection composant 2 modules components protection cover 44 3351 6014 *** capot de protection composant 4 modules 4 modules components protection cover 44 3351 6022 *** serre cables orientable 2 modules Adjustable cable clamp 44 3351 6024 *** serre cables orientable 4 modules 4 modules adjustable cable clamp 44 3351 6062 020 Capot de fiche durci 2 modules 2 modules shielded plug cover 46 3351 6064 020 capot de fiche durci 4 modules 4 modules shielded plug cover 45 3351 6072 020 Capot d'embase durci 2 modules 2 modules shielded receptacle cover 46 3351 6074 020 Capot d'embase durci 4 modules 4 modules shielded receptacle cover 45 3351 6084 303 serre cable monobloc 4 modules 4 modules monoblock cable clamp 44 3402 8016 301 socle pour relais 2 RT 2 RT relay socket 3402 8017 301 socle pour relais 2 RT 2 RT relay socket 3402 8018 301 socle pour relais 2 RT 2 RT relay socket 3402 8020 301 socle pour relais 2 RT 2 RT relay socket 3404 8014 301 socle pour relais 4 RT 4RT relay socket 3404 8015 301 socle pour relais 4 RT 4RT relay socket 3404 8016 301 socle pour relais 4 RT 4RT relay socket 3404 8017 301 socle pour relais 4 RT 4RT relay socket 3404 8019 301 socle pour relais 4 RT 4RT relay socket 3404 8021 301 socle pour relais 4 RT 4RT relay socket 3404 8022 301 socle pour relais 4 RT 4RT relay socket 3404 8023 301 socle pour relais 4 RT 4RT relay socket 3404 8024 301 socle pour relais 4 RT 4RT relay socket 3404 8026 301 socle pour relais 4 RT 4RT relay socket 3404 8027 301 socle pour relais 4 RT 4RT relay socket 3404 8030 301 3405 80** 316 socle pour relais 4 RT adaptateur hermetique 4RT relay socket 84 84 84 84 87 87 87 87 87 87 87 87 87 87 87 87 sealed adapter 75 SIM * F 0412 P * Module male 4 contacts taille 12 Pin module 4 contacts size 12 58 SIM * F 0412 S * Module femelle 4 contacts taille 12 Socket module 4 contacts size 12 58 SIM * F 0816 P * Module male 8 contacts taille 16 Pin module 8 contacts size 16 58 SIM * F 0816 S * Module femelle 8 contacts taille 16 Socket module 8 contacts size 16 58 SIM * F 1220 P * Module male 12 contacts taille 20 Pin module 12 contacts size 20 58 SIM * F 1220 S * Module femelle 12 contacts taille 20 Socket Module 12 contacts size 20 58 SIM 2 B 40 K Fiche clicker nut 2 modules 2 modules clicker nut plug 42 SIM 2 B 42 K Embase standard 2 modules 2 modules standard receptacle 41 SIM 2 B 43 K Embase courte 2 modules 2 modules short receptacle 41 SIM 2 B 44 K Embase a collerette 2 modules 2 modules flanged receptacle 41 SIM 2 B 45 K Embase a collerette courte 2 modules 2 modules short flanged receptacle 41 SIM 2 B 80 K Fiche clicker nut 4 modules 4 modules clicker nut plug 41 SIM 2 B 82 K Embase standard 4 modules 4 modules standard receptacle 41 41 SIM 2 B 83 K Embase courte 4 modules 4 modules short receptacle SIM 2 B 84 K Embase a collerette 4 modules 4 modules flanged receptacle 41 SIM 2 B 85 K Embase a collerette courte 4 modules 4 modules short flanged recepatcle 41 SIM 2 S 1 0 0 * SIM splice version standard SIM splice standard version 53 SIM 2 S 1 0 2 * SIM splice avec collerette SIM splice with flange 54 SIM 2 S 1 1 0 * SIM splice avec serre cables SIM splice with cable clamp 53 SIM 2 S 1 1 2 * SIM splice avec serre cables et collerette SIM splice with cable clamp and flange 54 42 SIM 2 S 40 K Fiche clicker nut composite durci 2 modules 2 modules shielded composite clicker nut plug SIM 2 S 42 K Embase standard composite durci 2 modules 2 modules shielded composite standard receptacle 41 SIM 2 S 43 K Embase courte composite durci 2 modules 2 modules shielded composite short receptacle 41 41 SIM 2 S 44 K Embase a collerette composite durci 2 modules 2 modules shielded composite flanged receptacle SIM 2 S 45 K Embase a collerette courte composite durci 2 modules 2 modules shielded composite short flanged receptacle 41 SIM 2 S 80 K Fiche clicker nut composite durci 4 modules 4 modules shielded composite clicker nut plug 41 SIM 2 S 82 K Embase standard composite durci 4 modules 4 modules shielded composite standard receptacle 41 SIM 2 S 83 K Embase courte composite durci 4 modules 4 modules shielded composite short receptacle 41 SIM 2 S 84 K Embase a collerette composite durci 4 modules 4 modules shielded composite flanged receptacle 41 SIM 2 S 85 K Embase a collerette courte composite durci 4 modules 4 modules shielded composite short flanged recepatcle 41 101 102 Amphenol Amphenol Air LB Direction des Ventes / Sales office Immeuble le Doublon - 11, Avenue Dubonnet 92407 COURBEVOIE Cedex - France Tel. : (33) 01 49 05 30 00 - Fax : (33) 01 49 05 30 10 dircial@amphenol-airlb.fr www.amphenol-airlb.fr Siege social, Finances, R & D Head Office, Finances, R & D Centre de Production Production Center 29, Voie d'Yvois 08110 BLAGNY - FRANCE 10, Rue Champ Raymond 08110 CARIGNAN - FRANCE Amphenol Pcd Amphenol Air LB GmbH 72 Cherry Hill Drive - Beverly, MA 01915 USA Tel : (+1) 978 624.3400 - Fax: (+1) 978 927.1513 www.amphenolpcd.com info@amphenolpcd.com Am Kleinbahnhof 4 - D-66740 SAARLOUIS Tel. : (49) 68 31 98 10 18 - Fax : (49) 68 31 98 10 30 www.amphenol-airlb.de info@amphenol-airlb.de Autres divisions Amphenol More divisions on www.amphenol.com Ce document n'est pas contractuel. Les informations contenues dans ce catalogue sont susceptibles d'evolution. Amphenol-Air LB se reserve le droit de proceder a des modifications sans preavis. Pour tout renseignement complementaire, nous consulter. This document is not a contractual document. The information included in this catalogue is subject to changes. Amphenol-Air LB reserves the right to proceed with modifications without prior notice. For any additional information, do not hesitate to contact us.