CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 520C 85 °C Long-life, Inverter Grade, Aluminum
Specifications
EIA Ripple Life:
Life Test:
Shelf Life:
Vibration:
8,000 h at full load @ +85 °C per EIA IS-749
∆Capacitance ±20%
ESR 200% of limit
DCL 100% of limit
10,000 h at rated voltage and 85 °C
∆ Capacitance: ±20%
ESR: 200% of limit
DCL: 100% of limit
500 h @ 85 °C, capacitance, ESR and DCL, initial require-
ments
10 to 55 Hz, 0.06” and 10 g max, 1.5 h ea. of 2 axis
45 °C 55 °C 65 °C 75 °C 85 °C
1.80 1.63 1.45 1.25 1.00
Frequency
10 kHz
50 Hz 60 Hz 120 Hz
360 Hz 1 kHz 5 kHz & up
1 3/8” & 1 3/4” Diameters
200 to 350 V 0.76 0.81 1.00 1.24 1.36 1.43 1.44
400 to 500 Vx 0.76 0.81 1.00 1.24 1.37 1.44 1.45
2” & 2 1/2” Diameters
200 to 350 V 0.78 0.83 1.00 1.20 1.29 1.34 1.35
400 to 500 V 0.77 0.82 1.00 1.22 1.33 1.39 1.40
3” & 3 1/2” Diameters
200 to 350 V 0.84 0.88 1.00 1.12 1.17 1.20 1.20
400 to 500 V 0.79 0.84 1.00 1.18 1.26 1.31 1.32
Ultra-Ripple, Long-life, Inverter Grade, 85 ºC
Type 520C is the 85 °C version of the Type 550C Inverter-
Grade capacitor. It delivers the ripple-current capability and
exceptional life needed for motor-drive bus capacitors and
approaches the performance of the 550C at lower cost. It is
rated for 8000 hours life with full ripple current, rated voltage,
85 °C and 100 lfm airflow while mounted horizontally.
Horizontal mounting is more severe than vertical mounting.
The extended cathode foil of the 520C assures heat flow
from the capacitor element to the can in all orientations.
Best Value High Ripple Type
8,000 hour load life
Ripple current to 55 amps
ESRs to 8 mΩ
Best value high ripple current
Thermal-Pak™ extended cathode construction
•
•
•
•
•
Highlights
Operating Temperature:
Rated Voltage:
Capacitance:
Capacitance Tolerance:
Leakage Current:
Cold Impedence:
Ripple Current Multipliers:
–40 °C to +85 °C
200 to 500 Vdc
84 µF to 39,000 µF
–10% +50%
≤3√CV (µA) 5 mA max., 5 minutes
–20 °C multiple of 25 °C Z ≤3
Ambient Temperature
Complies with the EU Directive
2002/95/EC requirement restricting
the use of Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl
Ethers (PBDE).
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 520C 85 °C Long-life, Inverter Grade, Aluminum
Outline Drawing Case Dimensions
Uninsulated Case Dimensions
For insulated case, add 0.024”(0.610 mm) to “D”and 0.030”(0.762 mm) to height.
NOTE:With the stud-mount feature, a ther-
mally-conductive disk can be inserted in the
bottom flush with the outer insulating sleeve.
This reduces the thermal resistance through
the can bottom by 0.3 °C/W. Can Style P.
Diam. (D) Length (L) Terminals (S)
Case ±.031 ±.78 ±.062 ±1.57 ±0.015 ±.38 Typical Weight
Code Inches mm Inches mm Inches mm oz g
AK 1.375 34.93 1.625 41.28 0.50 12.70 1.9 54
AA 1.375 34.93 2.125 53.98 0.50 12.70 2.0 57
AH 1.375 34.93 2.625 66.68 0.50 12.70 2.7 77
AB 1.375 34.93 3.125 79.38 0.50 12.70 3.3 94
AJ 1.375 34.93 3.625 92.08 0.50 12.70 3.8 108
AC 1.375 34.93 4.125 104.78 0.50 12.70 4.4 125
AD 1.375 34.93 4.625 117.48 0.50 12.70 5.1 145
AE 1.375 34.93 5.125 130.18 0.50 12.70 6.8 193
AF 1.375 34.93 5.625 142.88 0.50 12.70 8.1 230
EA 1.750 44.45 2.125 53.98 0.75 19.05 2.7 76
EH 1.750 44.45 2.625 66.68 0.75 19.05 3.8 108
EB 1.750 44.45 3.125 79.38 0.75 19.05 5.1 145
EJ 1.750 44.45 3.625 92.08 0.75 19.05 6.8 193
EC 1.750 44.45 4.125 104.78 0.75 19.05 8.1 230
ED 1.750 44.45 4.625 117.48 0.75 19.05 9.0 255
EE 1.750 44.45 5.125 130.18 0.75 19.05 9.5 269
EF 1.750 44.45 5.625 142.88 0.75 19.05 10.5 298
BA 2.000 50.80 2.125 53.98 0.88 22.23 5.4 153
BH 2.000 50.80 2.625 66.68 0.88 22.23 6.1 173
BB 2.000 50.80 3.125 79.38 0.88 22.23 6.8 193
BJ 2.000 50.80 3.625 92.08 0.88 22.23 8.2 232
BC 2.000 50.80 4.125 104.78 0.88 22.23 9.5 269
BD 2.000 50.80 4.625 117.48 0.88 22.23 10.3 292
BE 2.000 50.80 5.125 130.18 0.88 22.23 10.7 303
BF 2.000 50.80 5.625 142.88 0.88 22.23 13.0 369
CH 2.500 63.50 2.625 66.68 1.13 28.58 9.2 261
CB 2.500 63.50 3.125 79.38 1.13 28.58 10.4 295
CJ 2.500 63.50 3.625 92.08 1.13 28.58 12.7 361
CC 2.500 63.50 4.125 104.78 1.13 28.58 15.0 425
CD 2.500 63.50 4.625 117.48 1.13 28.58 17.2 488
CE 2.500 63.50 5.125 130.18 1.13 28.58 19.3 547
CF 2.500 63.50 5.625 142.88 1.13 28.58 21.4 607
DB 3.000 76.20 3.125 79.38 1.25 31.75 16.7 473
DJ 3.000 76.20 3.625 92.08 1.25 31.75 20.0 567
DC 3.000 76.20 4.125 104.78 1.25 31.75 22.2 629
DD 3.000 76.20 4.625 117.48 1.25 31.75 25.5 723
DE 3.000 76.20 5.125 130.18 1.25 31.75 30.0 850
DF 3.000 76.20 5.625 142.88 1.25 31.75 31.9 904
DP 3.000 76.20 5.875 149.23 1.25 31.75 32.8 931
DN 3.000 76.20 7.625 193.68 1.25 31.75 39.5 1119
DG 3.000 76.20 8.625 219.08 1.25 31.75 43.3 1227
FC 3.500 88.90 4.125 104.78 1.25 31.75 30.0 850
FD 3.500 88.90 4.625 117.48 1.25 31.75 34.4 976
FE 3.500 88.90 5.125 130.18 1.25 31.75 40.5 1148
FF 3.500 88.90 5.625 142.88 1.25 31.75 43.1 1221
FP 3.500 88.90 5.875 149.23 1.25 31.75 44.3 1257
FN 3.500 88.90 7.625 193.68 1.25 31.75 53.3 1512
FG 3.500 88.90 8.625 219.08 1.25 31.75 58.5 1658
Stud Dimensions
Case
Stud P± 0.039”
Diam. Thread (±1.0 mm)
1.38 M8 0.470” (12.0)
1.75 M8 0.470” (12.0)
2.00 M12 0.630” (16.0)
2.50 M12 0.630” (16.0)
3.00 M12 0.630” (16.0)
3.50 M12 0.630” (16.0)
Terminal Dimensions
For Case Post Diameter H max min Full Thread Torque
Terminal Style Diameters Code in mm in mm Thread in mm in·lb N·m
Low Post 1⅜ to 3 A 0.314 8.0 0.094 2.4 10–32 0.218 5.5 25 2.82
High Post 1⅜ to 3 B 0.314 8.0 0.281 7.1 10–32 0.375 9.5 25 2.82
High Current, Low 2½ to 3½ D 0.684 17.4 0.125 3.2 ¼–28 0.344 8.7 60 6.78
High Current, High 2½ to 3½ E 0.684 17.4 0.281 7.1 ¼–28 0.469 11.9 60 6.78
M5 Post, Small 1⅜ to 2 M 0.314 8.0 0.281 7.1 M5 0.375 9.5 25 2.82
M5 Post 2½ & 3 F 0.512 13.0 0.230 5.8 M5 0.344 8.7 25 2.82
M6 Low Post 2½ to 3½ G 0.684 17.4 0.125 3.2 M6 0.344 8.7 60 6.78
M6 High Post 2½ to 3½ H 0.684 17.4 0.281 7.1 M6 0.469 11.9 60 6.78
Hardware &
Mounting Options
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 520C 85 °C Long-life, Inverter Grade, Aluminum
Uninsulated Case Dimensions
For insulated case, add 0.024”(0.610 mm) to “D”and 0.030”(0.762 mm) to height.
Type Capacitance Tolerance Voltage Case Code Insulation Terminal Can Style
520C 782 = 7800 µF M= ±20% 200=200 Vdc 0= None A= Low Post Blank=
520C 782 T 500 FG 2 D S
Part Numbering System
U= 10%+75% 500=500 Vdc 1= Polyester B= High Post Standard
T= 10%+50% 2= PVC D= High Current, Can
Low Post S= Stud
Mount
P= Stud
with
thermal
pad
E= High Current,
F or M= M5 Post
G= M6 Low Post
H= M6 High Post
High Post
Standard insulation is 0.008-in PVC sleeve with 0.01-in polypropylene end disk.
Typical Performance Curves
Diam. (D) Length (L) Terminals (S)
Case ±.031 ±.78 ±.062 ±1.57 ±0.015 ±.38 Typical Weight
Code Inches mm Inches mm Inches mm oz g
AK 1.375 34.93 1.625 41.28 0.50 12.70 1.9 54
AA 1.375 34.93 2.125 53.98 0.50 12.70 2.0 57
AH 1.375 34.93 2.625 66.68 0.50 12.70 2.7 77
AB 1.375 34.93 3.125 79.38 0.50 12.70 3.3 94
AJ 1.375 34.93 3.625 92.08 0.50 12.70 3.8 108
AC 1.375 34.93 4.125 104.78 0.50 12.70 4.4 125
AD 1.375 34.93 4.625 117.48 0.50 12.70 5.1 145
AE 1.375 34.93 5.125 130.18 0.50 12.70 6.8 193
AF 1.375 34.93 5.625 142.88 0.50 12.70 8.1 230
EA 1.750 44.45 2.125 53.98 0.75 19.05 2.7 76
EH 1.750 44.45 2.625 66.68 0.75 19.05 3.8 108
EB 1.750 44.45 3.125 79.38 0.75 19.05 5.1 145
EJ 1.750 44.45 3.625 92.08 0.75 19.05 6.8 193
EC 1.750 44.45 4.125 104.78 0.75 19.05 8.1 230
ED 1.750 44.45 4.625 117.48 0.75 19.05 9.0 255
EE 1.750 44.45 5.125 130.18 0.75 19.05 9.5 269
EF 1.750 44.45 5.625 142.88 0.75 19.05 10.5 298
BA 2.000 50.80 2.125 53.98 0.88 22.23 5.4 153
BH 2.000 50.80 2.625 66.68 0.88 22.23 6.1 173
BB 2.000 50.80 3.125 79.38 0.88 22.23 6.8 193
BJ 2.000 50.80 3.625 92.08 0.88 22.23 8.2 232
BC 2.000 50.80 4.125 104.78 0.88 22.23 9.5 269
BD 2.000 50.80 4.625 117.48 0.88 22.23 10.3 292
BE 2.000 50.80 5.125 130.18 0.88 22.23 10.7 303
BF 2.000 50.80 5.625 142.88 0.88 22.23 13.0 369
CH 2.500 63.50 2.625 66.68 1.13 28.58 9.2 261
CB 2.500 63.50 3.125 79.38 1.13 28.58 10.4 295
CJ 2.500 63.50 3.625 92.08 1.13 28.58 12.7 361
CC 2.500 63.50 4.125 104.78 1.13 28.58 15.0 425
CD 2.500 63.50 4.625 117.48 1.13 28.58 17.2 488
CE 2.500 63.50 5.125 130.18 1.13 28.58 19.3 547
CF 2.500 63.50 5.625 142.88 1.13 28.58 21.4 607
DB 3.000 76.20 3.125 79.38 1.25 31.75 16.7 473
DJ 3.000 76.20 3.625 92.08 1.25 31.75 20.0 567
DC 3.000 76.20 4.125 104.78 1.25 31.75 22.2 629
DD 3.000 76.20 4.625 117.48 1.25 31.75 25.5 723
DE 3.000 76.20 5.125 130.18 1.25 31.75 30.0 850
DF 3.000 76.20 5.625 142.88 1.25 31.75 31.9 904
DP 3.000 76.20 5.875 149.23 1.25 31.75 32.8 931
DN 3.000 76.20 7.625 193.68 1.25 31.75 39.5 1119
DG 3.000 76.20 8.625 219.08 1.25 31.75 43.3 1227
FC 3.500 88.90 4.125 104.78 1.25 31.75 30.0 850
FD 3.500 88.90 4.625 117.48 1.25 31.75 34.4 976
FE 3.500 88.90 5.125 130.18 1.25 31.75 40.5 1148
FF 3.500 88.90 5.625 142.88 1.25 31.75 43.1 1221
FP 3.500 88.90 5.875 149.23 1.25 31.75 44.3 1257
FN 3.500 88.90 7.625 193.68 1.25 31.75 53.3 1512
FG 3.500 88.90 8.625 219.08 1.25 31.75 58.5 1658
Polyester insulation is not available for 3.5-inch diameter units.
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 520C 85 °C Long-life, Inverter Grade, Aluminum
Ratings RoHS Compliant
Catalog
Part Number
ESR Max.
@ 25 °C
120 Hz
(mΩ)
Ripple Max.
@ 85°C
120 Hz
(A)
Nominal Size
D x L
(inches)
Catalog
Part Number
ESR Max.
@ 25 °C
120 Hz
(mΩ)
Ripple Max.
@ 85°C
120 Hz
(A)
Nominal Size
D x L
(inches)
Cap.
(µF)
Cap.
(µF)
200 Vdc (250 Vdc Surge) 39000 520C393T200FG2D 8.3 37.2 3.5 x 8 5/8
430 520C431T200AK2B 216.0 2.4 1 3/8 x 1 5/8 250 Vdc (300 Vdc Surge)
780 520C781T200AA2B 147.0 3.2 1 3/8 x 2 1/8 290 520C291T250AK2B 273.0 2.1 1 3/8 x 1 5/8
950 520C951T200AH2B 106.0 4.0 1 3/8 x 2 5/8 530 520C531T250AA2B 164.0 3.0 1 3/8 x 2 1/8
1300 520C132T200AB2B 82.4 4.9 1 3/8 x 3 1/8 640 520C641T250AH2B 125.0 3.7 1 3/8 x 2 5/8
1300 520C132T200EA2B 83.1 4.9 1 3/4 x 2 1/8 880 520C881T250AB2B 91.9 4.6 1 3/8 x 3 1/8
1400 520C142T200BA2B 86.1 5.2 2 x 2 1/8 880 520C881T250EA2B 104.0 4.4 1 3/4 x 2 1/8
1600 520C162T200AJ2B 67.1 5.7 1 3/8 x 3 5/8 940 520C941T250BA2B 99.3 4.9 2 x 2 1/8
1600 520C162T200EH2B 65.7 5.9 1 3/4 x 2 5/8 1100 520C112T250AJ2B 72.9 5.5 1 3/8 x 3 5/8
2000 520C202T200AC2B 54.2 6.6 1 3/8 x 4 1/8 1100 520C112T250EH2B 87.0 5.2 1 3/4 x 2 5/8
2000 520C202T200BH2B 64.1 6.5 2 x 2 5/8 1300 520C132T250AC2B 60.6 6.3 1 3/8 x 4 1/8
2200 520C222T200EB2B 50.8 7.2 1 3/4 x 3 1/8 1400 520C142T250BH2B 69.0 6.3 2 x 2 5/8
2300 520C232T200AD2B 45.4 7.6 1 3/8 x 4 5/8 1500 520C152T250EB2B 64.1 6.4 1 3/4 x 3 1/8
2700 520C272T200AE2B 39.7 8.4 1 3/8 x 5 1/8 1600 520C162T250AD2B 54.1 6.9 1 3/8 x 4 5/8
2700 520C272T200EJ2B 39.8 8.5 1 3/4 x 3 5/8 1800 520C182T250AE2B 46.3 7.8 1 3/8 x 5 1/8
2800 520C282T200BB2B 48.4 8.0 2 x 3 1/8 1900 520C192T250EJ2B 51.0 7.6 1 3/4 x 3 5/8
3000 520C302T200AF2B 35.0 9.3 1 3/8 x 5 5/8 1900 520C192T250BB2B 48.5 8.0 2 x 3 1/8
3200 520C322T200CH2B 44.3 9.0 2 1/2 x 2 5/8 2000 520C202T250AF2B 40.3 8.7 1 3/8 x 5 5/8
3300 520C332T200EC2B 32.9 9.8 1 3/4 x 4 1/8 2100 520C212T250CH2B 54.2 8.2 2 1/2 x 2 5/8
3600 520C362T200BJ2B 38.0 9.5 2 x 3 5/8 2200 520C222T250EC2B 42.4 8.7 1 3/4 x 4 1/8
3900 520C392T200ED2B 28.1 11.1 1 3/4 x 4 5/8 2400 520C242T250BJ2B 40.0 9.2 2 x 3 5/8
4400 520C442T200BC2B 30.0 11.2 2 x 4 1/8 2600 520C262T250ED2B 36.4 9.7 1 3/4 x 4 5/8
4400 520C442T200CB2B 32.8 11.1 2 1/2 x 3 1/8 3000 520C302T250EE2B 32.0 10.8 1 3/4 x 5 1/8
4500 520C452T200EE2B 24.6 12.3 1 3/4 x 5 1/8 3000 520C302T250BC2B 33.0 10.6 2 x 4 1/8
5000 520C502T200EF2B 22.0 13.4 1 3/4 x 5 5/8 3000 520C302T250CB2B 33.6 11.0 2 1/2 x 3 1/8
5200 520C522T200BD2B 25.7 12.5 2 x 4 5/8 3400 520C342T250EF2B 28.6 11.8 1 3/4 x 5 5/8
5700 520C572T200CJ2B 23.4 13.8 2 1/2 x 3 5/8 3500 520C352T250BD2B 28.2 12.0 2 x 4 5/8
6000 520C602T200BE2B 22.8 13.8 2 x 5 1/8 3900 520C392T250CJ2B 26.3 13.0 2 1/2 x 3 5/8
6400 520C642T200DB2B 31.8 12.6 3 x 3 1/8 4100 520C412T250BE2B 24.7 13.2 2 x 5 1/8
6800 520C682T200BF2B 20.6 15.0 2 x 5 5/8 4300 520C432T250DB2B 29.0 13.2 3 x 3 1/8
7000 520C702T200CC2B 21.3 15.1 2 1/2 x 4 1/8 4600 520C462T250BF2B 22.1 14.5 2 x 5 5/8
8200 520C822T200CD2B 18.2 17.0 2 1/2 x 4 5/8 4700 520C472T250CC2B 21.8 15.0 2 1/2 x 4 1/8
8200 520C822T200DJ2B 24.9 15.0 3 x 3 5/8 5600 520C562T250CD2B 18.6 16.8 2 1/2 x 4 5/8
9500 520C952T200CD2B 16.6 18.4 2 1/2 x 5 1/8 5600 520C562T250DJ2B 22.7 15.7 3 x 3 5/8
10000 520C103T200DC2B 20.7 17.1 3 x 4 1/8 6400 520C642T250CD2B 16.3 18.6 2 1/2 x 5 1/8
11000 520C113T200CF2B 14.4 20.4 2 1/2 x 5 5/8 6800 520C682T250DC2B 18.5 18.2 3 x 4 1/8
12000 520C123T200DD2B 17.7 19.2 3 x 4 5/8 7300 520C732T250CF2B 14.5 20.3 2 1/2 x 5 5/8
14000 520C143T200DE2B 18.0 19.7 3 x 5 1/8 8000 520C802T250DD2B 17.1 19.5 3 x 4 5/8
15000 520C153T200FC2D 15.6 21.7 3 1/2 x 4 1/8 9300 520C932T250DE2B 15.0 21.6 3 x 5 1/8
16000 520C163T200DF2B 14.0 23.0 3 x 5 5/8 10000 520C103T250FC2D 20.4 19.0 3 1/2 x 4 1/8
16000 520C163T200DP2B 16.1 21.7 3 x 5 7/8 11000 520C113T250DF2B 12.6 24.3 3 x 5 5/8
17000 520C173T200FD2D 13.3 24.4 3 1/2 x 4 5/8 11000 520C113T250DP2B 12.1 25.1 3 x 5 7/8
20000 520C203T200FE2D 14.1 24.4 3 1/2 x 5 1/8 12000 520C123T250FD2D 18.1 20.9 3 1/2 x 4 5/8
22000 520C223T200DN2D 12.3 27.6 3 x 7 5/8 14000 520C143T250FE2D 15.8 23.0 3 1/2 x 5 1/8
23000 520C233T200FF2D 12.6 26.5 3 1/2 x 5 5/8 15000 520C153T250FF2D 13.9 25.3 3 1/2 x 5 5/8
24000 520C243T200FP2D 12.0 27.5 3 1/2 x 5 7/8 16000 520C163T250DN2B 9.1 32.2 3 x 7 5/8
26000 520C263T200DG2D 10.1 31.0 3 x 8 5/8 16000 520C163T250FP2D 13.5 26.0 3 1/2 x 5 7/8
34000 520C343T200FN2D 9.7 33.6 3 1/2 x 7 5/8 18000 520C183T250DG2D 7.4 36.2 3 x 8 5/8
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 520C 85 °C Long-life, Inverter Grade, Aluminum
Catalog
Part Number
ESR Max.
@ 25 °C
120 Hz
(mΩ)
Ripple Max.
@ 85°C
120 Hz
(A)
Nominal Size
D x L
(inches)
Catalog
Part Number
ESR Max.
@ 25 °C
120 Hz
(mΩ)
Ripple Max.
@ 85°C
120 Hz
(A)
Nominal Size
D x L
(inches)
Cap.
(µF)
Cap.
(µF)
22000 520C223T250FN2D 11.0 31.5 3 1/2 x 7 5/8 14000 520C143T300DG2B 11.3 29.3 3 x 8 5/8
26000 520C263T250FG2D 9.6 34.6 3 1/2 x 8 5/8 17000 520C173T300FN2D 11.5 30.9 3 1/2 x 7 5/8
300 Vdc (350 Vdc Surge) 20000 520C203T300FG2D 9.8 34.2 3 1/2 x 8 5/8
210 520C211T300AK2B 439.0 1.7 1 3/8 x 1 5/8 350 Vdc (400 Vdc Surge)
360 520C361T300AA2B 243.0 2.5 1 3/8 x 2 1/8 190 520C191T350AK2B 636.0 1.4 1 3/8 x 1 5/8
510 520C511T300AH2B 198.0 2.9 1 3/8 x 2 5/8 330 520C331T350AA2B 398.0 1.9 1 3/8 x 2 1/8
530 520C531T300EA2B 146.0 3.7 1 3/4 x 2 1/8 460 520C461T350AH2B 266.0 2.5 1 3/8 x 2 5/8
670 520C671T300AB2B 144.0 3.7 1 3/8 x 3 1/8 480 520C481T350EA2B 185.0 3.3 1 3/4 x 2 1/8
670 520C671T300BA2B 138.0 4.1 2 x 2 1/8 610 520C611T350BA2B 176.0 3.7 2 x 2 1/8
760 520C761T300EH2B 123.0 4.3 1 3/4 x 2 5/8 620 520C621T350AB2B 200.0 3.1 1 3/8 x 3 1/8
840 520C841T300AJ2B 112.0 4.4 1 3/8 x 3 5/8 690 520C691T350EH2B 170.0 3.7 1 3/4 x 2 5/8
960 520C961T300BH2B 108.0 5.0 2 x 2 5/8 770 520C771T350AJ2B 160.0 3.7 1 3/8 x 3 5/8
1000 520C102T300AC2B 94.9 5.0 1 3/8 x 4 1/8 880 520C881T350BH2B 139.0 4.4 2 x 2 5/8
1100 520C112T300EB2B 88.7 5.4 1 3/4 x 3 1/8 920 520C921T350AC2B 134.0 4.2 1 3/8 x 4 1/8
1200 520C122T300AD2B 81.2 5.7 1 3/8 x 4 5/8 970 520C971T350EB2B 131.0 4.5 1 3/4 x 3 1/8
1300 520C132T300AE2B 69.0 6.4 1 3/8 x 5 1/8 1100 520C112T350AD2B 115.0 4.8 1 3/8 x 4 5/8
1300 520C132T300BB2B 71.7 6.6 2 x 3 1/8 1200 520C122T350AE2B 101.0 5.3 1 3/8 x 5 1/8
1400 520C142T300EJ2B 74.7 6.2 1 3/4 x 3 5/8 1200 520C122T350BB2B 107.0 5.4 2 x 3 1/8
1500 520C152T300AF2B 63.4 6.9 1 3/8 x 5 5/8 1300 520C132T350EJ2B 102.0 5.3 1 3/4 x 3 5/8
1600 520C162T300CH2B 59.5 7.8 2 1/2 x 2 5/8 1400 520C142T350AF2B 90.2 5.8 1 3/8 x 5 5/8
1700 520C172T300EC2B 63.6 7.1 1 3/4 x 4 1/8 1500 520C152T350EC2B 83.9 6.2 1 3/4 x 4 1/8
1700 520C172T300BJ2B 58.3 7.7 2 x 3 5/8 1500 520C152T350CH2B 91.3 6.3 2 1/2 x 2 5/8
2000 520C202T300ED2B 51.0 8.2 1 3/4 x 4 5/8 1600 520C162T350BJ2B 83.2 6.4 2 x 3 5/8
2200 520C222T300CB2B 48.8 9.1 2 1/2 x 3 1/8 1800 520C182T350ED2B 71.2 7.0 1 3/4 x 4 5/8
2300 520C232T300EE2B 44.7 9.1 1 3/4 x 5 1/8 2000 520C202T350CB2B 64.0 8.0 2 1/2 x 3 1/8
2400 520C242T300BC2B 48.0 8.8 2 x 4 1/8 2100 520C212T350EE2B 62.0 7.7 1 3/4 x 5 1/8
2500 520C252T300BD2B 40.8 9.9 2 x 4 5/8 2200 520C222T350BC2B 68.4 7.4 2 x 4 1/8
2600 520C262T300EF2B 39.8 10.0 1 3/4 x 5 5/8 2300 520C232T350BD2B 58.1 8.3 2 x 4 5/8
2900 520C292T300BE2B 35.7 11.0 2 x 5 1/8 2400 520C242T350EF2B 55.0 8.5 1 3/4 x 5 5/8
2900 520C292T300CJ2B 40.0 10.6 2 1/2 x 3 5/8 2600 520C262T350BE2B 50.7 9.2 2 x 5 1/8
3300 520C332T300BF2B 31.7 12.1 2 x 5 5/8 2600 520C262T350CJ2B 51.0 9.4 2 1/2 x 3 5/8
3400 520C342T300DB2B 44.9 10.6 3 x 3 1/8 3000 520C302T350BF2B 45.0 10.1 2 x 5 5/8
3500 520C352T300CC2B 31.4 12.5 2 1/2 x 4 1/8 3100 520C312T350DB2B 56.6 9.5 3 x 3 1/8
4100 520C412T300CD2B 26.8 14.0 2 1/2 x 4 5/8 3200 520C322T350CC2B 41.9 10.8 2 1/2 x 4 1/8
4300 520C432T300DJ2B 35.7 12.5 3 x 3 5/8 3800 520C382T350CD2B 35.7 12.1 2 1/2 x 4 5/8
4800 520C482T300CD2B 23.3 15.5 2 1/2 x 5 1/8 4000 520C402T350DJ2B 43.8 11.3 3 x 3 5/8
5300 520C532T300DC2B 27.5 14.9 3 x 4 1/8 4400 520C442T350CD2B 31.1 13.5 2 1/2 x 5 1/8
5400 520C542T300CF2B 20.7 17.0 2 1/2 x 5 5/8 4800 520C482T350DC2B 36.5 12.9 3 x 4 1/8
6300 520C632T300DD2B 24.8 16.3 3 x 4 5/8 4900 520C492T350CF2B 27.6 14.7 2 1/2 x 5 5/8
7200 520C722T300DE2B 21.5 18.0 3 x 5 1/8 5700 520C572T350DD2B 31.0 14.5 3 x 4 5/8
7400 520C742T300FC2D 22.1 18.2 3 1/2 x 4 1/8 6600 520C662T350DE2B 27.1 16.1 3 x 5 1/8
8200 520C822T300DF2B 18.9 19.8 3 x 5 5/8 6800 520C682T350FC2D 31.4 15.3 3 1/2 x 4 1/8
8700 520C872T300DP2B 17.9 20.6 3 x 5 7/8 7500 520C752T350DF2B 24.1 17.5 3 x 5 5/8
8800 520C882T300FD2D 19.1 20.3 3 1/2 x 4 5/8 7900 520C792T350DP2B 22.8 18.3 3 x 5 7/8
10000 520C103T300FE2D 16.8 22.3 3 1/2 x 5 1/8 8000 520C802T350FD2D 27.0 17.1 3 1/2 x 4 5/8
11000 520C113T300FF2D 15.0 24.4 3 1/2 x 5 5/8 9200 520C922T350FE2D 23.6 18.9 3 1/2 x 5 1/8
12000 520C123T300DN2B 13.8 26.1 3 x 7 5/8 10000 520C103T350FF2D 21.0 20.6 3 1/2 x 5 5/8
12000 520C123T300FP2D 14.2 25.3 3 1/2 x 5 7/8 10000 520C103T350FF2D 21.0 20.6 3 1/2 x 5 5/8
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 520C 85 °C Long-life, Inverter Grade, Aluminum
Catalog
Part Number
ESR Max.
@ 25 °C
120 Hz
(mΩ)
Ripple Max.
@ 85°C
120 Hz
(A)
Nominal Size
D x L
(inches)
Catalog
Part Number
ESR Max.
@ 25 °C
120 Hz
(mΩ)
Ripple Max.
@ 85°C
120 Hz
(A)
Nominal Size
D x L
(inches)
Cap.
(µF)
Cap.
(µF)
11000 520C113T350FP2D 19.9 21.4 3 1/2 x 5 7/8 8400 520C842T400DN2B 19.1 22.2 3 x 7 5/8
13000 520C133T350DG2B 14.9 25.5 3 x 8 5/8 8500 520C852T400FP2D 21.1 20.8 3 1/2 x 5 7/8
15000 520C153T350FN2D 15.7 26.7 3 1/2 x 7 5/8 9800 520C982T400DG2B 15.8 24.8 3 x 8 5/8
18000 520C183T350FG2D 13.0 29.7 3 1/2 x 8 5/8 12000 520C123T400FN2D 16.6 25.9 3 1/2 x 7 5/8
400 Vdc (450 Vdc Surge) 14000 520C143T400FG2D 13.8 28.8 3 1/2 x 8 5/8
150 520C151T400AK2B 685.0 1.3 1 3/8 x 1 5/8 450 Vdc (500 Vdc Surge)
250 520C251T400AA2B 429.0 1.9 1 3/8 x 2 1/8 120 520C121T450AK2B 831.0 1.2 1 3/8 x 1 5/8
350 520C351T400AH2B 286.0 2.5 1 3/8 x 2 5/8 210 520C211T450AA2B 460.0 1.8 1 3/8 x 2 1/8
370 520C371T400EA2B 199.0 3.2 1 3/4 x 2 1/8 290 520C291T450AH2B 344.0 2.2 1 3/8 x 2 5/8
470 520C471T400AB2B 215.0 3.0 1 3/8 x 3 1/8 300 520C301T450EA2B 347.0 2.4 1 3/4 x 2 1/8
470 520C471T400BA2B 188.0 3.5 2 x 2 1/8 390 520C391T450AB2B 258.0 2.8 1 3/8 x 3 1/8
530 520C531T400EH2B 182.0 3.6 1 3/4 x 2 5/8 390 520C391T450BA2B 240.0 3.1 2 x 2 1/8
590 520C591T400AJ2B 173.0 3.6 1 3/8 x 3 5/8 440 520C441T450EH2B 224.0 3.2 1 3/4 x 2 5/8
670 520C671T400BH2B 149.0 4.3 2 x 2 5/8 490 520C491T450AJ2B 207.0 3.2 1 3/8 x 3 5/8
710 520C711T400AC2B 149.0 4.0 1 3/8 x 4 1/8 550 520C551T450BH2B 187.0 3.8 2 x 2 5/8
740 520C741T400EB2B 141.0 4.3 1 3/4 x 3 1/8 580 520C581T450AC2B 173.0 3.7 1 3/8 x 4 1/8
820 520C821T400AD2B 124.0 4.6 1 3/8 x 4 5/8 610 520C611T450EB2B 173.0 3.9 1 3/4 x 3 1/8
940 520C941T400AE2B 109.0 5.1 1 3/8 x 5 1/8 680 520C681T450AD2B 149.0 4.2 1 3/8 x 4 5/8
940 520C941T400BB2B 114.0 5.2 2 x 3 1/8 780 520C781T450AE2B 131.0 4.6 1 3/8 x 5 1/8
950 520C951T400EJ2B 110.0 5.1 1 3/4 x 3 5/8 780 520C781T450BB2B 134.0 4.8 2 x 3 1/8
1100 520C112T400AF2B 97.1 5.6 1 3/8 x 5 5/8 790 520C791T450EJ2B 135.0 4.6 1 3/4 x 3 5/8
1100 520C112T400CH2B 97.8 6.1 2 1/2 x 2 5/8 870 520C871T450AF2B 146.0 4.6 1 3/8 x 5 5/8
1200 520C122T400EC2B 97.8 5.7 1 3/4 x 4 1/8 920 520C921T450CH2B 114.0 5.6 2 1/2 x 2 5/8
1200 520C122T400BJ2B 89.2 6.2 2 x 3 5/8 960 520C961T450EC2B 111.0 5.4 1 3/4 x 4 1/8
1400 520C142T400ED2B 76.5 6.7 1 3/4 x 4 5/8 1000 520C102T450BJ2B 104.0 5.7 2 x 3 5/8
1600 520C162T400EE2B 66.6 7.5 1 3/4 x 5 1/8 1100 520C112T450ED2B 94.2 6.1 1 3/4 x 4 5/8
1600 520C162T400CB2B 68.6 7.7 2 1/2 x 3 1/8 1300 520C132T450EE2B 82.0 6.7 1 3/4 x 5 1/8
1700 520C172T400BC2B 73.3 7.1 2 x 4 1/8 1300 520C132T450CB2B 81.9 7.0 2 1/2 x 3 1/8
1700 520C172T400BD2B 62.3 8.1 2 x 4 5/8 1400 520C142T450BC2B 82.1 6.7 2 x 4 1/8
1800 520C182T400EF2B 59.0 8.2 1 3/4 x 5 5/8 1400 520C142T450BD2B 71.4 7.5 2 x 4 5/8
2000 520C202T400BE2B 54.3 8.9 2 x 5 1/8 1500 520C152T450EF2B 72.7 7.4 1 3/4 x 5 5/8
2000 520C202T400CJ2B 54.6 9.1 2 1/2 x 3 5/8 1600 520C162T450CJ2B 63.5 8.4 2 1/2 x 3 5/8
2300 520C232T400BF2B 48.2 9.8 2 x 5 5/8 1700 520C172T450BE2B 63.5 8.3 2 x 5 1/8
2400 520C242T400CC2B 44.9 10.4 2 1/2 x 4 1/8 1900 520C192T450BF2B 53.4 9.3 2 x 5 5/8
2400 520C242T400DB2B 60.4 9.2 3 x 3 1/8 1900 520C192T450DB2B 52.6 9.8 3 x 3 1/8
2900 520C292T400CD2B 47.1 10.6 2 1/2 x 4 5/8 2000 520C202T450CC2B 49.8 9.9 2 1/2 x 4 1/8
3000 520C302T400DJ2B 47.1 10.9 3 x 3 5/8 2400 520C242T450CD2B 42.3 11.1 2 1/2 x 4 5/8
3300 520C332T400CD2B 33.0 13.0 2 1/2 x 5 1/8 2500 520C252T450DJ2B 40.3 11.8 3 x 3 5/8
3700 520C372T400DC2B 38.8 12.5 3 x 4 1/8 2700 520C272T450CD2B 38.9 12.0 2 1/2 x 5 1/8
3800 520C382T400CF2B 33.0 13.5 2 1/2 x 5 5/8 3100 520C312T450CF2B 32.7 13.5 2 1/2 x 5 5/8
4400 520C442T400DD2B 29.5 14.9 3 x 4 5/8 3100 520C312T450DC2B 33.0 13.6 3 x 4 1/8
5000 520C502T400DE2B 28.8 15.6 3 x 5 1/8 3600 520C362T450DD2B 27.8 15.3 3 x 4 5/8
5200 520C522T400FC2D 33.5 14.8 3 1/2 x 4 1/8 4200 520C422T450DE2B 23.9 17.1 3 x 5 1/8
5700 520C572T400DF2B 25.6 17.0 3 x 5 5/8 4300 520C432T450FC2D 23.9 17.5 3 1/2 x 4 1/8
6100 520C612T400DP2B 24.3 17.7 3 x 5 7/8 4700 520C472T450DF2B 21.3 18.7 3 x 5 5/8
6100 520C612T400FD2D 28.8 16.6 3 1/2 x 4 5/8 5000 520C502T450DP2B 20.0 19.5 3 x 5 7/8
7000 520C702T400FE2D 25.1 18.3 3 1/2 x 5 1/8 5000 520C502T450FD2D 20.0 19.9 3 1/2 x 4 5/8
8000 520C802T400FF2D 22.3 20.0 3 1/2 x 5 5/8 5800 520C582T450FE2D 17.6 21.8 3 1/2 x 5 1/8
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800 • www.cde.com
Type 520C 85 °C Long-life, Inverter Grade, Aluminum
Catalog
Part Number
ESR Max.
@ 25 °C
120 Hz
(mΩ)
Ripple Max.
@ 85°C
120 Hz
(A)
Nominal Size
D x L
(inches)
Catalog
Part Number
ESR Max.
@ 25 °C
120 Hz
(mΩ)
Ripple Max.
@ 85°C
120 Hz
(A)
Nominal Size
D x L
(inches)
Cap.
(µF)
Cap.
(µF)
6600 520C662T450FF2D 15.1 24.2 3 1/2 x 5 5/8 890 520C891T500CB2B 118.0 5.9 2 1/2 x 3 1/8
7000 520C702T450FP2D 14.3 25.2 3 1/2 x 5 7/8 910 520C911T500EE2B 121.0 5.5 1 3/4 x 5 1/8
7000 520C702T450DN2B 15.0 25.0 3 x 7 5/8 1000 520C102T500EF2B 110.0 6.0 1 3/4 x 5 5/8
8100 520C812T450DG2B 12.5 27.9 3 x 8 5/8 1000 520C102T500BD2B 105.0 6.2 2 x 4 5/8
9500 520C952T450FN2D 11.0 32.0 3 1/2 x 7 5/8 1100 520C112T500CJ2B 91.9 7.0 2 1/2 x 3 5/8
11000 520C113T450FG2D 9.1 35.5 3 1/2 x 8 5/8 1200 520C122T500BE2B 91.4 6.9 2 x 5 1/8
500 Vdc (550 Vdc Surge) 1300 520C132T500BF2B 80.9 7.6 2 x 5 5/8
84 520C840T500AK2B 1310.0 1.0 1 3/8 x 1 5/8 1300 520C132T500DB2B 77.1 8.1 3 x 3 1/8
140 520C141T500AA2B 773.0 1.4 1 3/8 x 2 1/8 1400 520C142T500CC2B 73.1 8.2 2 1/2 x 4 1/8
200 520C201T500AH2B 547.0 1.8 1 3/8 x 2 5/8 1600 520C162T500CD2B 63.2 9.1 2 1/2 x 4 5/8
210 520C211T500EA2B 531.0 1.9 1 3/4 x 2 1/8 1700 520C172T500DJ2B 60.1 9.7 3 x 3 5/8
270 520C271T500AB2B 411.0 2.2 1 3/8 x 3 1/8 1900 520C192T500CD2B 54.9 10.1 2 1/2 x 5 1/8
270 520C271T500BA2B 389.0 2.5 2 x 2 1/8 2100 520C212T500DC2B 49.4 11.1 3 x 4 1/8
340 520C341T500AJ2B 329.0 2.6 1 3/8 x 3 5/8 2200 520C222T500CF2B 46.2 11.4 2 1/2 x 5 5/8
380 520C381T500BH2B 271.0 3.2 2 x 2 5/8 2500 520C252T500DD2B 42.0 12.5 3 x 4 5/8
400 520C401T500AC2B 275.0 3.0 1 3/8 x 4 1/8 2900 520C292T500DE2B 36.5 13.8 3 x 5 1/8
420 520C421T500EB2B 264.0 3.1 1 3/4 x 3 1/8 3000 520C302T500FC2D 35.7 14.4 3 1/2 x 4 1/8
470 520C471T500AD2B 236.0 3.3 1 3/8 x 4 5/8 3300 520C332T500DF2B 32.4 15.1 3 x 5 5/8
540 520C541T500AE2B 207.0 3.7 1 3/8 x 5 1/8 3500 520C352T500DP2B 30.6 15.8 3 x 5 7/8
540 520C541T500BB2B 194.0 4.0 2 x 3 1/8 3500 520C352T500FD2D 30.3 16.1 3 1/2 x 4 5/8
550 520C551T500EJ2B 200.0 3.8 1 3/4 x 3 5/8 4000 520C402T500FE2D 26.4 17.8 3 1/2 x 5 1/8
610 520C611T500AF2B 230.0 3.6 1 3/8 x 5 5/8 4600 520C462T500FF2D 23.4 19.5 3 1/2 x 5 5/8
630 520C631T500CH2B 165.0 4.7 2 1/2 x 2 5/8 4800 520C482T500FP2D 22.2 20.3 3 1/2 x 5 7/8
670 520C671T500EC2B 164.0 4.4 1 3/4 x 4 1/8 4800 520C482T500DN2B 23.9 19.8 3 x 7 5/8
690 520C691T500BJ2B 151.0 4.8 2 x 3 5/8 5600 520C562T500DG2B 19.7 22.2 3 x 8 5/8
790 520C791T500ED2B 139.0 5.0 1 3/4 x 4 5/8 6700 520C672T500FN2D 17.3 25.4 3 1/2 x 7 5/8
840 520C841T500BC2B 124.0 5.5 2 x 4 1/8 7800 520C782T500FG2D 14.2 28.4 3
