66234 FOUR CHANNELS, HERMETIC 16 DUAL-IN-LINE, OPTICALLY COUPLED ISOLATOR OPTOELECTRONIC PRODUCTS DIVISION 06/06/2013 Features: Applications: High Reliability Base lead provided for conventional transistor biasing Very high gain, high voltage transistor Stability over wide temperature range. +1 kVdc electrical isolation Screening available Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The Mii 66234 are optically coupled isolators, consisting of four GaAlAs LEDs and four silicon phototransistors mounted and coupled in a 16 pin dual-in-line package. All electrical characteristics of each channel are identical to the JEDEC registered 4N49. Each unit contains four channels. These solid state couplers are ideal for designs where board space and device weight are important design considerations. ABSOLUTE MAXIMUM RATINGS Input-to-output Voltage (Note 1) .......................................................................................................................................... +1 kV Collector-Emitter Voltage ...................................................................................................................................................... 40 V Emitter-Collector Voltage ......................................................................................................................................................... 7 V Input Diode Reverse Voltage .................................................................................................................................................. 3 V Input Diode Continuous Forward Current at (or below) 25C Free-Air Temperature (Note 2) ......................................... 40 mA Input Diode Power Dissipation .......................................................................................................................................... 60 mW Continuous Collector Current ............................................................................................................................................. 50 mA Continuous Transistor Power Dissipation at (or below) 25C Free-Air Temperature (Note 3) ...................................... 300 mW Storage Temperature......................................................................................................................................... -65C to +150C Operating Free-Air Temperature Range ............................................................................................................-55C to +125C Lead Solder Temperature (10 seconds, 1/16" from case) ................................................................................................. 240C Notes: 1. Measured with Inputs shorted together and outputs shorted together. 2. Derate linearly to 125C free-air temperature at the rate of 0.40 mA/C above 65C. 3. Derate linearly to 125C free-air temperature at the rate of 3 mW/C. Package Dimensions Schematic Diagram 0.320 [8.13] MAX A1 1 16 C1 A3 5 12 C3 K1 2 15 E1 K3 6 11 E3 A2 3 14 C2 A4 7 10 C4 K2 4 13 E2 K4 8 0.300 REF 0.013 [0.33] 0.007 [0.18] PIN 1 INDICATOR 0.820 [20.83] 0.790 [20.07] 0.130 [3.30] TYP 0.170 [4.32] MIN 0.110 [2.79] 0.090 [2.29] 0.020 TYP ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 9 E4 66234 FOUR CHANNELS, HERMETIC 16 DUAL-IN-LINE OPTICALLY COUPLED ISOLATOR 06/06/2013 ELECTRICAL CHARACTERISTICS TA = 25C unless otherwise specified. PARAMETER SYMBOL Input Diode Static Reverse Current Input Diode Forward Voltage MIN TYP IR -55C +25C +125C MAX UNITS TEST CONDITIONS NOTE 100 A VR = 3 V 1 1.7 1.5 1.3 V IF = 10 mA VF 1.0 0.8 0.7 Collector-Emitter Breakdown Voltage V(BR)CEO 40 V IC = 1 mA, IF = 0 Emitter-Collector Breakdown Voltage V(BR)ECO 7 V IE = 100 A, IF = 0 On State Collector Current Ta = +25C IC(ON) 2.0 mA VCE = 5 V, IF = 1 mA On State Collector Current Ta = -55C IC(ON) 2.8 mA VCE = 5 V, IF = 2 mA On State Collector Current Ta = +125C IC(ON) 2.0 mA VCE = 5V, IF = 2 mA Off State Collector Current IC(OFF) 100 nA VCE = 20 V, IF = 0 mA Off State Collector Current, Ta = +125C IC(OFF) 100 A VCE = 20 V, IF = 0 mA VCE(SAT) 0.3 V IF = 2 mA, IC = 2 mA, IF = 2 mA, IC = 1 mA, IF = 2 mA, IC = 0.5 mA, VIN-OUT = 1 kV, tw = 100 s, duty cycle 1% 5 pF F = 1 MHz, VIN-OUT = 0 25 s VCC = 10 V, IF = 5 mA, RL = 100 OUTPUT TRANSISTOR TA = 25C unless otherwise specified. COUPLED CHARACTERISTICS TA = 25C unless otherwise specified. Collector-Emitter Saturation Voltage Input to Output Resistance RIO Input to Output Capacitance CIO Rise Time (Phototransistor Operation) or Fall Time tr or tf 10 11 10 10 NOTES: 1. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. SELECTION GUIDE PART NUMBER PART DESCRIPTION 66234-001 4N49, Commercial 66234-101 4N49, Screened Micropac Industries cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement. Micropac reserves the right to make changes at any time in order to improve design and to supply the best product possible. MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION 725 E.Walnut St., Garland, TX 75040 (972)272-3571 Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 1