ADVANCE TECHNICAL
INFORMATION
G
C
E
TO-247
GCE
MIN TYP MAX
1200
4.5 5.5 6.5
2.5 3.0
3.1 3.7
0.6
3.0
±100
Characteristic / Test Conditions
Collector-Emitter Breakdown Voltage (VGE = 0V, IC = 0.6mA)
Gate Threshold Voltage (VCE = VGE, IC = 350µA, Tj = 25°C)
Collector-Emitter On Voltage (VGE = 15V, IC = IC2, Tj = 25°C)
Collector-Emitter On Voltage (VGE = 15V, IC = IC2, Tj = 125°C)
Collector Cut-off Current (VCE = VCES, VGE = 0V, Tj = 25°C)
Collector Cut-off Current (VCE = VCES, VGE = 0V, Tj = 125°C)
Gate-Emitter Leakage Current (VGE = ±20V, VCE = 0V)
Symbol
BVCES
VGE(TH)
VCE(ON)
ICES
IGES
MAXIMUM RATINGS (IGBT) All Ratings: TC = 25°C unless otherwise specified.
STATIC ELECTRICAL CHARACTERISTICS (IGBT)
UNIT
Volts
mA
nA
Symbol
VCES
VCGR
VGE
IC1
IC2
ICM1
ICM2
PD
TJ,TSTG
TL
Parameter
Collector-Emitter Voltage
Collector-Gate Voltage (RGE = 20KΩ)
Gate-Emitter Voltage
Continuous Collector Current @ TC = 25°C
Continuous Collector Current @ TC = 110°C
Pulsed Collector Current 1 @ TC = 25°C
Pulsed Collector Current 1 @ TC = 110°C
Total Power Dissipation
Operating and Storage Junction Temperature Range
Max. Lead Temp. for Soldering: 0.063" from Case for 10 Sec.
APT11GF120BRD1
1200
1200
±20
22
11
44
22
125
-55 to 150
300
UNIT
Volts
Amps
Watts
°C
052-6258 Rev F 1-2003
APT11GF120BRD1
1200V 22A
The Fast IGBT™ is a new generation of high voltage power IGBTs. Using Non-
Punch Through Technology the Fast IGBT™ combined with an APT free-
wheeling ultraFast Recovery Epitaxial Diode (FRED) offers superior
ruggedness and fast switching speed.
• Low Forward Voltage Drop • High Freq. Switching to 20KHz
• Low Tail Current • Ultra Low Leakage Current
• RBSOA and SCSOA Rated
• Ultrafast Soft Recovery Antiparallel Diode
Fast IGBT & FRED
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
ADVANCE TECHNICAL
INFORMATION
Symbol
Cies
Coes
Cres
Qg
Qge
Qgc
td(on)
tr
td(off)
tf
td(on)
tr
td(off)
tf
Eon
Eoff
Ets
td(on)
tr
td(off)
tf
Ets
gfe
DYNAMIC CHARACTERISTICS (IGBT) APT11GF120BRD1
UNIT
°C/W
oz
gm
lb•in
N•m
MIN TYP MAX
1.00
2.0
40
0.22
6.1
10
1.1
Characteristic
Junction to Case (IGBT)
Junction to Case (FRED)
Junction to Ambient
Package Weight
Mounting Torque using a 6-32 or 3mm Binding Head Machine Screw
Symbol
RΘJC
RΘJA
WT
Torque
THERMAL AND MECHANICAL CHARACTERISTICS (IGBT and FRED)
Test Conditions
Capacitance
VGE = 0V
VCE = 25V
f = 1 MHz
Gate Charge
VGE = 15V
VCC = 0.5VCES
IC = IC2
Resistive Switching (25°C)
VGE = 15V
VCC = 0.8VCES
IC = IC2
RG = 10Ω
Inductive Switching (125°C)
VCLAMP(Peak) = 0.66VCES
VGE = 15V
IC = IC2
RG = 10Ω
TJ = +125°C
Inductive Switching (25°C)
VCLAMP(Peak) = 0.66VCES
VGE = 15V
IC = IC2
RG = 10Ω
TJ = +25°C
VCE = 20V, IC = IC2
MIN TYP MAX
600 800
90 130
38 65
60
8
38
10
50
55
110
13
20
125
90
.5
1.0
1.5
13
20
110
90
1.0
4.7
UNIT
pF
nC
ns
ns
mJ
ns
mJ
S
052-6258 Rev F 1-2003
Characteristic
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Total Gate Charge 2
Gate-Emitter Charge
Gate-Collector ("Mille r") Charge
Turn-on Delay Time
Rise Time
Turn-off Delay Time
Fall Time
Turn-on Delay Time
Rise Time
Turn-off Delay Time
Fall Time
Turn-on Switching Energy 3
Turn-off Switching Energy
Total Switching Losses 3
Turn-on Delay Time
Rise Time
Turn-off Delay Time
Fall Time
Total Switching Losses 3
Forward Transconductance
1Repetitive Rating: Pulse width limited by maximum junction temperature.
2See MIL-STD-750 Method 3471
3Switching losses include the FRED and IGBT.
APT Reserves the right to change, without notice, the specifications and information contained herein.
ADVANCE TECHNICAL
INFORMATION
Characteristic / Test Conditions
Maximum D.C. Reverse Voltage
Maximum Peak Repetitive Reverse Voltage
Maximum Working Peak Reverse Voltage
Maximum Average Forward Current (TC = 85°C, Duty Cycle = 0.5)
RMS Forward Current
Non-Repetitive Forward Surge Current (TJ = 45°C, 8.3ms)
Symbol
VR
VRRM
VRWM
IF(AV)
IF(RMS)
IFSM
Symbol
VF
IRM
LS
Characteristic / Test Conditions
IF = 15A
Maximum Forward Voltage IF = 30A
IF = 15A, TJ = 150°C
Maximum Reverse Leakage Current VR = VR Rated
VR = VR Rated, TJ = 125°C
Series Inductance (Lead to Lead 5mm from Base)
STATIC ELECTRICAL CHARACTERISTICS (FRED)
UNIT
Volts
Amps
UNIT
Volts
µA
nH
MIN TYP MAX
2.5
2.5
2.2
250
500
10
APT11GF120BRD1
1200
15
29
110
MAXIMUM RATINGS (FRED) All Ratings: TC = 25°C unless otherwise specified.
ULTRAFAST SOFT RECOVERY PARALLEL DIODE
052-6258 Rev F 1-2003
Maximum Reverse Leakage Current
MIN TYP MAX
48 TBD
60
132
192
211
4.0 TBD
7 TBD
126
523
12
18
166
81
UNIT
ns
Amps
nC
Volts
A/µs
Characteristic
Reverse Recovery Time, IF = 1.0A, diF/dt = -15A/µs, VR = 30V, TJ = 25°C
Reverse Recovery Time TJ = 25°C
IF = 15A, diF/dt = -100A/µs, VR = 650V TJ = 100°C
Forward Recovery Time TJ = 25°C
IF = 15A, diF/dt = 100A/µs, VR = 650V TJ = 100°C
Reverse Recovery Current TJ = 25°C
IF = 15A, diF/dt = -100A/µs, VR = 650V TJ = 100°C
Recovery Charge TJ = 25°C
IF = 15A, diF/dt = -100A/µs, VR = 650V TJ = 100°C
Forward Recovery Voltage TJ = 25°C
IF = 15A, diF/dt = 100A/µs, VR = 650V TJ = 100°C
Rate of Fall of Recovery Current TJ = 25°C
IF = 15A, diF/dt = -100A/µs, VR =650V TJ = 100°C
DYNAMIC CHARACTERISTICS (FRED)
Symbol
trr1
trr2
trr3
tfr1
tfr2
IRRM1
IRRM2
Qrr1
Qrr2
Vfr1
Vfr2
diM/dt
APT11GF120BRD1
ADVANCE TECHNICAL
INFORMATION
APT11GF120BRD1
052-6258 Rev F 1-2003
PEARSON 411
CURRENT
TRANSFORMER
0.5 IRRM
di
F
/dt Adjust
30µH
D.U.T.
+15v
-15v
0v
Vr
Dimensions in Millimeters and (Inches)
4
3
1
2
5
5
0.75 IRRM
trr/Qrr
Waveform
Zero
6
1
2
3
4
6
di
F
/dt - Current Slew Rate, Rate of Forward
Current Change Through Zero Crossing.
I
F
- Forward Conduction Current
I
RRM
- Peak Reverse Recovery Current.
trr - Reverse Recovery Time Measured from Point of I
F
Qrr - Area Under the Curve Defined by I
RRM
and trr.
diM/dt - Maximum Rate of Current Change During the Trailing Portion of trr.
Current Falling Through Zero to a Tangent Line
{
diM/dt
}
Extrapolated Through Zero Defined by 0.75 and 0.50 I
RRM
.
6
Figure 25, Diode Reverse Recovery Test Circuit and Waveforms
Figure 8, Diode Reverse Recovery Waveform and Definitions
Qrr = 1/2
(
trr . I
RRM)
15.49 (.610)
16.26 (.640)
5.38 (.212)
6.20 (.244)
6.15 (.242) BSC
4.50 (.177) Max.
19.81 (.780)
20.32 (.800)
20.80 (.819)
21.46 (.845)
1.65 (.065)
2.13 (.084)
1.01 (.040)
1.40 (.055)
5.45 (.215) BSC
3.55 (.140)
3.81 (.150)
2.87 (.113)
3.12 (.123)
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
2.21 (.087)
2.59 (.102)
0.40 (.016)
0.79 (.031)
2-Plcs.
Collector
(Cathode)
Emitter
(Anode)
Gate
Collector
(Cathode)
TO-247 Package Outline